Low-molecular-weight chitosans derived from β-chitin: preparation, molecular characteristics and aggregation activity

Preparation, molecular characteristics, and aggregation activity of low-molecular-weight chitosans derived from β-chitin have been studied in comparison with those of chitosans from -chitin. Chitosan derived from β-chitin was partially degraded with alkali and acid to prepare chitosans with reduced molecular weights. The reaction was also conducted with chitosan from -chitin, but it was less susceptible to the degradation than chitosan from β-chitin. The resulting two series of chitosans had molecular weights ranging from 11 to 436 kDa. GPC analysis showed similar changes in the molecular weight distribution in the progress of main chain cleavage of the two kinds of chitosans. The polydispersity values were 2.01–4.16, indicating relatively narrow molecular weight distributions. These chitosans aggregated bovine serum albumin efficiently, and the aggregation behavior was dependent on the molecular weight and concentration of chitosan in addition to the pH of the media and concentration of sodium chloride. The aggregation activity of chitosans from β-chitin was found to be somewhat higher than that of chitosans from -chitin.     

Salt-assisted acid hydrolysis of chitosan to oligomers under microwave irradiation

The effect of inorganic salts such as sodium chloride on the hydrolysis of chitosan in a microwave field was investigated. While it is known that microwave heating is a convenient way to obtain a wide range of products of different molecular weights only by changing the reaction time and/or the radiation power, the addition of some inorganic salts was shown to effectively accelerate the degradation of chitosan under microwave irradiation. The molecular weight of the degraded chitosan obtained by microwave irradiation was considerably lower than that obtained by traditional heating. Moreover, the molecular weight of degraded chitosan obtained by microwave irradiation assisted under the conditions of added salt was considerably lower than that obtained by microwave irradiation without added salt. Furthermore, the effect of ionic strength of the added salts was not linked with the change of molecular weight. FTIR spectral analyses demonstrated that a significantly shorter time was required to obtain a satisfactory molecular weight by the microwave irradiation-assisted inorganic salt method than by microwave irradiation without inorganic salts and conventional technology.     

Effect of ultrasonic treatment on the biochemphysical properties of chitosan

Four chitosans with different molecular weights and degrees of deacetylation degree and 28 chitosans derived from these initial chitosans by ultrasonic degradation have been characterized by gel permeation chromatography (GPC), FT-IR spectroscopy, X-ray diffraction and titrimetric analyses. Antimicrobial activities were investigated against E. coli and S. aureus using an inhibitory rate technique. The results showed that ultrasonic treatment decreased the molecular weight of chitosan, and that chitosan with higher molecular weight and higher DD was more easily degraded. The polydispersity decreased with ultrasonic treatment time, which was in linear relationship with the decrease of molecular weight. Ultrasonic degradation changed the DD of initial chitosan with a lower DD (<90%), but not the DD of the initials chitosan with a higher DD (>90%). The increased crystallinity of ultrasonically treated chitosan indicated that ultrasonic treatment changed the physical structure of chitosan, mainly due to the decrease of molecular weight. Ultrasonic treatment enhanced the antimicrobial activity of chitosan, mainly due to the decrease of molecular weight.     

Relevance of molecular weight of chitosan and its derivatives and their antioxidant activities in vitro

The antioxidant potency of different molecular weight (DMW) chitosan and sulfated chitosan derivatives was investigated employing various established in vitro systems, such as superoxide (O(2)(.-))/hydroxyl ((-.)OH) radicals scavenging, reducing power, iron ion chelating. As expected, we obtained several satisfying results, as follows: firstly, low molecular weight chitosan had stronger scavenging effect on O(2)(.-) and (-.)OH than high molecular weight chitosan. For example the O(2)(.-) scavenging activity of low molecular weight chitosan (9 kDa) and high molecular weight chitosan (760 kDa) were 85.86% and 35.50% at 1.6 mg/mL, respectively. Secondly, comparing with DMW chitosan, DMW sulfated chitosans had the stronger inhibition effect on O(2)(.-). At 0.05 mg/mL, the scavenging activity on O(2)(.-) reached 86.26% for low molecular weight chitosan sulfate (9 kDa), but that of low molecular weight chitosan (9 kDa) was 85.86% at 1.6 mg/mL. As concerning chitosan and sulfated chitosan of the same molecular weight, scavenging activities of sulfated chitosan on superoxide and hydroxyl radicals were more pronounced than that of chitosan. Thirdly, low molecular weight chitosan sulfate had more effective scavenging activity on O(2)(.-) and (-.)OH than that of high molecular weight chitosan sulfate. Fourthly, DMW chitosans and sulfated chitosans were efficient in the reducing power, especially LCTS. Their orders were found to be LCTS>CTS4>HCTS>CTS3>CTS2>CTS1>CTS. Fifthly, CTS4 showed more considerable ferrous ion-chelating potency than others. Finally, the scavenging rate and reducing power of DMW chitosan and sulfated derivatives increased with their increasing concentration. Moreover, change of DMW sulfated chitosans was the most pronounced within the experimental concentration. However, chelating effect of DMW chitosans were not concentration dependent except for CTS4 and CTS1.     

Interaction of N-acylated and N-alkylated chitosans included in liposomes with lipopolysaccharide of gram-negative bacteria

The interactions of lipopolysaccharide (LPS) with the polycation chitosan and its derivatives — high molecular weight chitosans (300 kDa) with different degree of N-alkylation, its quaternized derivatives, N-monoacylated low molecular weight chitosans (5.5 kDa) — entrapped in anionic liposomes were studied. It was found that the addition of chitosans changes the surface potential and size of negatively charged liposomes, the magnitudes of which depend on the chitosan concentration. Acylated low molecular weight chitosan interacts with liposomes most effectively. The binding of alkylated high molecular weight chitosan with liposomes increases with the degree of its alkylation. The analysis of interaction of LPS with chitoliposomes has shown that LPS-binding activity decreased in the following order: liposomes coated with a hydrophobic chitosan derivatives > coated with chitosan > free liposomes. Liposomes with N-acylated low molecular weight chitosan bind LPS more effectively than liposomes coated with N-alkylated high molecular weight chitosans. The increase in positive charge on the molecules of N-alkylated high molecular weight chitosans at the cost of quaternization does not lead to useful increase in efficiency of binding chitosan with LPS. It was found that increase in LPS concentration leads to a change in surface ζ-potential of liposomes, an increase in average hydrodynamic diameter, and polydispersity of liposomes coated with N-acylated low molecular weight chitosan. The affinity of the interaction of LPS with a liposomal form of N-acylated chitosan increases in comparison with free liposomes. Computer simulation showed that the modification of the lipid bilayer of liposomes with N-acylated low molecular weight chitosan increases the binding of lipopolysaccharide without an O-specific polysaccharide with liposomes due to the formation of additional hydrogen and ionic bonds between the molecules of chitosan and LPS.     

Degradation of fully water-soluble, partially N-acetylated chitosans with lysozyme

Chitosans, prepared by homogeneous N-deacetylation of chitin, with degrees of N-acetylation ranging from 4 to 60% (F_A = 0·04 to 0·60) exhibiting full water solubility and known random distribution of acetyl groups, were degraded with lysozyme. Initial degradation rates (r) were determined from plots of the viscosity decrease (Δ1/[η]) against time of degradation. The time course of degradation of chitosans with lysozyme were non-linear, while the time course of degradation of chitosans with an oxidative-reductive depolymerization reaction (using H₂O₂) showed the expected linear relationship for a first-order, random depolymerization reaction, independent of the chemical composition of the chitosan.

The effect of lysozyme concentration and substrate concentration on the initial degradation rates were determined, showing that this lysozyme-chitosan system obeys Michaelis-Menten kinetics.

The initial degradation rates of chitosan with lysozyme increased strongly with increasing fraction of acetylated units (F_A). From a Michaelis-Menten analysis of the degradation data that assumes different catalytic activities of lysozyme for the different hexameric substrates in the polysaccharide chain, it is concluded that the hexameric substrates that contain three-four or more acetylated units contribute mostly to the initial degradation rate when lysozyme degrades partially N-acetylated chitosans.

A chitosan with a very low fraction of acetylated units (F_A = 0·010) was studied as an enzyme inhibitor. Initial degradation rates of chitosan (with different F_A values) decreased as the inhibitor concentration increased, while the relative rates stayed constant, indicating that the ratio between initial reaction rates for productive sites (hexamers containing three-four or more N-acetylated units) are unaffected by non-productive sites, as deduced from the theory of competing substrates.     

Fractionation and characterization of chitosan by analytical SEC and H NMR after semi-preparative SEC

Heterogeneity in molecular weight and degree of deacetylation (DDA) of chitosans from different sources and preparation methods were studied by fractionating chitosans, using semi-preparative SEC, and then determining molecular weight profiles of fractions by analytical SEC with multi-angle laser light scattering (SEC–MALLS), and degree of deacetylation (DDA) by ¹H NMR. Fractionation of two high molecular weight chitosans from different manufacturers, produced fractions that spanned a wide range of molecular weight (number-average M_n), from 65 to 400 kDa in one case, that was not evident when unfractionated material was directly analyzed by SEC providing M_n = 188 kDa and PDI = M_w/M_n = 1.73. In a second case, fractions ranged from 20 to 600 kDa with unfractionated M_n = 145 kDa and PDI = 1.83. Fractionation of low molecular weight chitosans also showed a broad range of molecular weight in the original material, however, the fractions obtained with the TSKgel G4000W column in the M_n range of 5–100 kDa were essentially monodisperse with PDIs between 1.0 and 1.4. The DDA of one low molecular weight chitosan (10 kDa) produced by nitrous acid degradation was dependent on the M_n of the fraction. This semi-preparative fractionation procedure revealed important compositional heterogeneities of chitosans not evident in unfractionated material, and permitted the production of monodisperse low molecular weight chitosans with homogeneous properties.     

Degradation of chitosans with chitinase B from Serratia marcescens. Production of chito-oligosaccharides and insight into enzyme processivity

Family 18 chitinases such as chitinase B (ChiB) from Serratia marcescens catalyze glycoside hydrolysis via a mechanism involving the N-acetyl group of the sugar bound to the -1 subsite. We have studied the degradation of the soluble heteropolymer chitosan, to obtain further insight into catalysis in ChiB and to experimentally assess the proposed processive action of this enzyme. Degradation of chitosans with varying degrees of acetylation was monitored by following the size-distribution of oligomers, and oligomers were isolated and partly sequenced using (1)H-NMR spectroscopy. Degradation of a chitosan with 65% acetylated units showed that ChiB is an exo-enzyme which degrades the polymer chains from their nonreducing ends. The degradation showed biphasic kinetics: the faster phase is dominated by cleavage on the reducing side of two acetylated units (occupying subsites -2 and -1), while the slower kinetic phase reflects cleavage on the reducing side of a deacetylated and an acetylated unit (bound to subsites -2 and -1, respectively). The enzyme did not show preferences with respect to acetylation of the sugar bound in the +1 subsite. Thus, the preference for an acetylated unit is absolute in the -1 subsite, whereas substrate specificity is less stringent in the -2 and +1 subsites. Consequently, even chitosans with low degrees of acetylation could be degraded by ChiB, permitting the production of mixtures of oligosaccharides with different size distributions and chemical composition. Initially, the degradation of the 65% acetylated chitosan almost exclusively yielded oligomers with even-numbered chain lengths. This provides experimental evidence for a processive mode of action, moving the sugar chain two residues at a time. The results show that nonproductive binding events are not necessarily followed by substrate release but rather by consecutive relocations of the sugar chain.     

Study on the heterogeneous degradation of chitosan with hydrogen peroxide under the catalysis of phosphotungstic acid

The oxidative degradation of chitosan with H₂O₂ aqueous solution was carried out under the catalysis of phosphotungstic acid in heterogeneous phase. The optimal conditions of degradation were determined by orthogonal tests. The structure of the degraded product was characterized by Fourier-transform infrared spectra (FTIR), diffuse reflectance spectra (DRS) and X-ray diffraction (XRD) analysis. The mechanism of the degradation was correlated with cleavage of the glycosidic bond. The experimental results showed that chitosan can be effectively degraded with H₂O₂ under the catalysis of phosphotungstic acid.     

Antibacterial effects of water-soluble low-molecular-weight chitosans on different microorganisms

Low-molecular-weight chitosans with a viscosity-average molecular weight (Mv) of 5 to 27 kDa and equal degree of deacetylation (DD, 85%) were highly active against Pseudomonas aureofaciens, Enterobacter agglomerans, Bacillus subtilis, and Bifidobacterium bifidum 791, causing death of 80 to 100% of cells. An exception to this tendency was Escherichia coli, for which the rate of cell death, induced by the 5-kDa chitosan, was 38%. The antibacterial effect was manifested as early as 10 min after incubation of 12-kDa chitosan with B. subtilis or E. coli cells. Candida krusei was almost insensitive to the above crab chitosans. However, Candida krusei was highly sensitive to chitosans with Mv 5, 6, 12, 15.7, and 27 kDa: the minimum inhibitory concentration (MIC) varied from 0.06 to 0.005%. Chitosans with M, 5, 12, and 15.7 kDa exerted an antibacterial effect on Staphylococcus aureus. Chitosans with Mv 5, 15.7, and 27 kDa had no effect on Bifidobacterium bifidum ATCC 14893. The antibacterial effect of the 4-kDa chitosan on E. coli and B. bifidum 791 increased with DD in the range 55-85%.     

N-(2-Carboxyethyl)chitosans: regioselective synthesis,characterisation and protolytic equilibria

N-(2-Carboxyethyl)chitosans were obtained by reaction of low molecular weight chitosan with a low degree of acetylation and 3-halopropionic acids under mild alkaline media (pH 8-9, NaHCO3) at 60 degrees C. The chemical structure of the derivatives obtained was determined by 1H and 13C NMR spectroscopies. It was found that alkylation of chitosan by 3-halopropionic acids proceeds exclusively at the amino groups. The products obtained are described in terms of their degrees of carboxyethylation and ratio of mono-, di-substitution and free amine content. The protonation constants of amino and carboxylate groups of a series of N-(2-carboxyethyl)chitosans were determined by pH-titration at ionic strength 0.1 M KNO3 and 25 degrees C.     

Non-specific depolymerization of chitosan by pronase and characterization of the resultant products.

Pronase (type XXV serine protease from Streptomyces griseus) efficiently depolymerizes chitosan, a linear beta-->1,4-linked polysaccharide of 2-amino-deoxyglucose and 2-amino-2-N-acetylamino-D-glucose, to low-molecular weight chitosans (LMWC), chito-oligomers (degree of polymerization, 2-6) and monomer. The maximum depolymerization occurred at pH 3.5 and 37 degrees C, and the reaction obeyed Michaelis-Menten kinetics with a Km of 5.21 mg.mL(-1) and Vmax of 138.55 nmoles.min(-1).mg(-1). The molecular mass of the major product, LMWC, varied between 9.0 +/- 0.5 kDa depending on the reaction time. Scanning electron microscopy of LMWC showed an approximately eightfold decrease in particle size and characterization by infrared spectroscopy, circular dichroism, X-ray diffractometry and 13C-NMR revealed them to possess a lower degree of acetylation, hydration and crystallinity compared to chitosan. Chitosanolysis by pronase is an alternative and inexpensive method to produce a variety of chitosan degradation products that have wide and varied biofunctionalities.     

Encapsulating live cells with water-soluble chitosan in physiological conditions

A new class of microcapsules was prepared under physiological conditions by polyelectrolyte complexation between two oppositely-charged, water-soluble polymers. The microcapsules consisted of an inner core of half N-acetylated chitosan and an outer shell of methacrylic acid (MAA) (20.4%)-hydroxyethyl methacrylate (HEMA) (27.4%)-methyl methacrylate (MMA) (52.2%) (MAA-HEMA-MMA) terpolymer. Both 400 and 150 kDa half N-acetylated chitosans maintained good water solubility and supplied enough protonated amino groups to coacervate with terpolymer at pH 7.0-7.4, in contrast to other chitosan-based microcapsules which must be prepared at pH <6.5. The viscosity of half N-acetylated chitosan solutions between 80 and 3000 cPas allowed the formation of microcapsules with spherical shape. Molar mass, pH and concentration of half N-acetylated chitosan, and reaction time, influenced the morphology, thickness and porosity of the microcapsules. Microcapsules formed with high concentration of half N-acetylated chitosan exhibited improved mechanical stability, whereas microcapsules formed with low concentration of half N-acetylated chitosan exhibited good permeability. This 3D microenvironment has been configured to cultivate sensitive anchorage-dependent cells such as hepatocytes to maintain high level of functions.     

Optimal gamma-ray dose and irradiation conditions for producing low-molecular-weight chitosan that retains its chemical structure

This study focuses on the optimal conditions for gamma irradiation to reduce the molecular weight of chitosan but still retain its chemical structure. Chitosan was irradiated under various conditions, i.e. flake solid state (condition 1), flake dispersed in water (condition 2), flake dispersed in 0.05, 0.1, 1 and 2% aqueous K(2)S(2)O(8) solution (conditions 3a, 3b, 3c and 3d, respectively), flake dispersed in 0.5, 1 and 2% aqueous H(2)O(2) solution (conditions 4a, 4b and 4c, respectively), and chitosan acetic acid solution (condition 5). Comparative studies were done using three types of chitosans with molecular weights of the order of 10(5) Da with degrees of deacetylation of 0.80, 0.85 and 0.90%. For all conditions, after irradiation, there were two regions of molecular weight reduction. A severe degradation occurred in the first region with decreases in the molecular weight of 80% for radiation doses up to 50 kGy for conditions 1, 2 and 3 (3a-3c) and 20 kGy for condition 4. In the second region, a slow degradation occurred, which resembled a plateau stage. The results for conditions 3d and 5 were the most dramatic, since the primary structure of chitosan was changed after the irradiation. The degradation of chitosan by gamma rays was found to be most effective for the amorphous structure. The retention of the structure of chitosan after gamma irradiation makes it possible to produce a low-molecular-weight chitosan that retains its functionality, as demonstrated by its activity in the coupling reaction with N,N'-carbonyldiimidazole.     

The preparation of low-molecular-weight chitosan using chitinolytic complex from Streptomyces kurssanovii

Streptomyces kurssanovii are Gram-positive mycelial bacteria ubiquitous in soil. They have a saprophytic way of life and produce many extracellular enzymes with polymer-degrading properties, for example, chitinase (EC 3.2.1.14) and N-acetyl-β- -glucosaminidase (EC3.2.1.30). Biochemical aspects of chitosan degradation were presented. Low-molecular-weight (LMW) chitosans with molecular weight 4–8 kDa were prepared from commercial crab chitosan by means of chitinolytic a complex from S. kurssanovii. The optimum conditions of process in solution (temperature, pH, enzyme-substrate ratio) have been determined. Yields of LMW chitosan were 70–80%.     

Evaluation of chitosans and Pichia guillermondii as growth inhibitors of Penicillium digitatum

Chitosans were obtained by room-temperature-homogeneous-deacetylation (RTHD) and freeze-pump-out-thaw-heterogeneous-deacetylation (FPT) from chitins purified from fermentations. Commercial chitosan was deacetylated by three-FPT-cycles. Chitosans and Pichia guillermondii were evaluated on the growth of Penicillium digitatum. Medium molecular weight (M(W)) chitosans displayed higher inhibitory activity against the yeast than low M(W) biopolymers. Chitosans with low degree of acetylation (DA) were inhibitory for yeast and mould. Therefore, a low M(W) and high DA chitosan was selected for use against moulds combined with yeasts. Biopolymer and yeasts presented an additive effect, since chitosans were effective to delay spore germination, whereas yeast decreased apical fungal growth.     

Rapid microwave synthesis of chitosan modified carbon nanotube composites

Chitosan modified multi-walled carbon nanotube composites were synthesized under microwave irradiation. The resultant chitosan modified multi-walled carbon nanotube composites were purified by twice adjusting of pH value of the solution and centrifugating in succession. The surface functional groups of chitosan modified multi-walled carbon nanotube composites are confirmed by Fourier transform infrared spectroscopy and UV–vis spectroscopy. Transmission electron microscopic images further show the morphologic changes of the carbon nanotubes. Thermal gravimetric analysis shows that the chitosan content in the chitosan modified multi-walled carbon nanotube composites is much higher than conventional methods. The whole reaction procedure can be completed in 1 h under microwave irradiation.     

Antioxidant properties of some different molecular weight chitosans

Chitosan, a cationic polysaccharide, is widely employed as dietary supplement and in pharmacological and biomedical applications. Although numerous studies have focused on its applications as pharmaceutical excipients or bioactive reagents, relationships between molecular weight (Mr) and biological properties remain unclear. The focus of this study was on the antioxidant properties of several Mr chitosans. We measured the ability of seven Mr chitosans (CT1; 2.8 kDa, CT2; 17.0 kDa, CT3; 33.5 kDa, CT4; 62.6 kDa, CT5; 87.7 kDa, CT6; 604 kDa, CT7; 931 kDa) to protect plasma protein from oxidation by peroxyl radicals derived from 2,2′-azobis (2-amidinopropane) dihydrochloride (AAPH). A comparison of the antioxidant action of high Mr chitosans (CT6–CT7) with that of low Mr chitosans (CT1–CT5) showed that low Mr chitosans (CT1–CT5) were more effective in preventing the formation of carbonyl groups in plasma protein exposed to peroxyl radicals. AAPH substantially increases plasma protein carbonyl content via the oxidation of human serum albumin (HSA). We also measured the ability of these chitosans to protect HSA against oxidation by AAPH. Low Mr chitosans (CT1–CT5) were found to effectively prevent the formation of carbonyl groups in HSA, when exposed to peroxyl radicals. Low Mr chitosans were also good scavengers of N-centered radicals, but high Mr chitosans were much less effective. We also found a strong correlation between antioxidant activity and the Mr of chitosans in vitro. These activities were also determined by using the ‘TPAC’ test. These results suggest that low Mr chitosans (CT1–CT3) may be absorbed well from the gastrointestinal tract and inhibit neutrophil activation and oxidation of serum albumin that is frequently observed in patients plasma undergoing hemodialysis, resulting in a reduction in oxidative stress associated with uremia.     

Metal accumulation in Lolium perenne and Brassica napus as affected by application of chitosans

The effects of chitosan, a fishery waste-based material, and its derivative glutaraldehyde cross-linked chitosan (chitosan-GLA) on metal uptake by Lolium perenne (perennial ryegrass) and Brassica napus (rapeseed) were studied in a greenhouse pot experiment. Metal uptake by perennial ryegrass was highly dependent on the rate of addition of the chitosans. Low application rate (1% w/w) enhanced metal uptake, whereas 10% (w/w) addition decreased metal uptake. It was estimated that chitosan 1% (w/w) treatment could assist perennial ryegrass to remove approximately 3.2 kg Zn/ha and 0.29 kg Pb/ha. For rapeseed, metal uptake was decreased at all rates of application of chitosans. The ammonium acetate extractable metals in soil decreased following application of chitosans and plant growth.     

Study on the synergetic degradation of chitosan with ultraviolet light and hydrogen peroxide

Chitosan was effectively degraded by hydrogen peroxide under irradiation with ultraviolet light. The existence of a synergetic effect on the degradation was demonstrated by means of viscometry. In addition, the optimal conditions of degradation were determined on the basis of orthogonal tests. The structure of the degraded product was characterized by Fourier-transform infrared spectra (FTIR) analysis and diffuse reflectance spectra (DRS) analysis. The mechanism of the degradation of chitosan was correlated with cleavage of the glycosidic bond.