Matching base-pair number dependence of the kinetics of DNA-DNA hybridization studied by surface plasmon fluorescence spectroscopy

Two single-stranded DNA oligonucleotides consisting of complementary base-pairs can form double strands. This phenomenon is well studied in solutions, however, in order to clarify the physical mechanism of the hybridization occurring at a solid/solution interface, we studied the kinetics by surface plasmon fluorescence spectroscopy (SPFS): one single-stranded oligo-DNA (probe-DNA) was immobilized on the substrate, the other one (target-DNA) labelled with a fluorescent probe was added to the flow cell. After hybridization, the chromophores could be excited by the surface plasmon mode and their fluorescence detected with high sensitivity. The dependence of the k(on) and k(off) rate constants on the length of the hybridizing oligonucleotides was investigated by using a MM0 series (no mismatch) and the kinetics was found to be well described by a Langmuir adsorption model. From these measurements we found that also in the case of surface hybridization the affinity of the duplexes decreases as the number of matching base-pairs decreases from 15 to 10. In order to show that SPFS is the powerful technique with high sensitivity, the hybridization process for mixed target-oligos was measured by SPFS and analyzed by an expanded Langmuir model in which two components of target-oligo can bind to probe-DNA at the sensor surface competitively. Two sets of the k(on) and k(off) obtained from the experiment are successfully consistent with the k(on) and k(off) obtained from experiments for single (pure) target-DNA.     

Enhanced photoelectrochemical method for linear DNA hybridization detection using Au-nanopaticle labeled DNA as probe onto titanium dioxide electrode

A photoelectrochemical method was proposed to detect DNA hybridization using Au nanoparticle modified DNA as one probe on TiO2 substrate, in which the TiO2 substrate was used not only as DNA anchors but also as the signal transducers. Hybridization between the probe and the target DNA oligonucleotides was confirmed by the decreased photocurrent of the TiO2 electrode. Compared with non-label probe, Au nanoparticles enhanced the photocurrent shifts after the hybridization. The photocurrent decreased with increasing the concentration of target DNA, indicating that this method could be used for quantitative measurements, and the discrimination of the complementary from mismatched DNA. Furthermore, the hybridization binding constant was obtained and photocurrent generation mechanism was discussed. The major advantages of this photochemical method are speed, simplicity and excellent specificity. This method provides a platform for studying a wide variety of biological processes using photoelectrochemical method.     

Label-free electrochemical DNA sensor based on functionalised conducting copolymer

A simple and label-free electrochemical sensor for recognition of the DNA hybridization event was prepared based on a new functionalised conducting copolymer, poly[pyrrole-co-4-(3-pyrrolyl) butanoic acid]. This precursor copolymer can be easily electrodeposited on the electrode surface and shows high electroactivity in an aqueous medium. An amino-substituted oligonucleotide (ODN) probe was covalently grafted onto the surface of the copolymer in a one step procedure and tested on hybridization with complementary ODN segments. The cyclic voltammogram of ODN probe-modified copolymer showed very little change when incubated in presence of non-complementary ODN, while a significant, and reproducible, modification of the voltammogram was observed after addition of complementary ODN. The AC impedance spectrum showed an increased charge transfer resistance (Rct) and double layer capacitance of the sensor film after hybridisation. Sensors with thinner films showed higher sensitivity than thicker films, suggesting that hybridisation at or near the surface of the film produces a larger change in electrical properties than that within the body of the film.     

Kinetics of hybridization on the oligonucleotide microchips with gel pads

The kinetics of hybridization on the oligonucleotide microchip with gel pads is studied both theoretically and experimentally. The monitoring of kinetics was performed with the measurements of fluorescence intensity produced by the labeled target oligonucleotides. As is shown, the hybridization time depends on the stability of the formed duplexes, the concentrations of target and probe oligonucleotides, and the diffusion of target oligonucleotides in solution and gel pad. The initial stage of hybridization is determined by the flow of target oligonucleotides from solution, then, followed by the diffusive propagation with approximately constant concentration of oligonucleotides at the boundary of gel pad and, finally, by the exponential saturation. The theoretical predictions of hybridization kinetics reveal a good correspondence with the experimental results and may be used for the choice of the optimal hybridization conditions. The possible applications of kinetic hybridization curves to the discrimination problems and assessment of diffusion coefficients in gel pads are briefly discussed. Finally, we discuss the relationships between the binding kinetics and the general functioning of biomolecular microchips.     

Disposable DNA electrochemical sensor for hybridization detection

A disposable electrochemical sensor for the detection of short DNA sequences is described. Synthetic single-stranded oligonucleotides have been immobilized onto graphite screen printed electrodes with two procedures, the first involving the binding of avidinbiotinylated oligonucleotide and the second adsorption at a controlled potential. The probes were hybridized with different concentrations of complementary sequences. The formed hybrids on the electrode surface were evaluated by differential pulse voltammetry and chronopotentiometric stripping analysis using daunomycin hydrochloride as indicator of hybridization reaction. The probe immobilization step, the hybridization event and the indicator detection, have been optimized. The DNA sensor obtained by adsorption at a controlled potential was able to detect 1 microgram/ml of target sequence in the buffer solution using chronopotentiometric stripping analysis.     

Photoelectric conversion by bacteriorhodopsin in charged synthetic membranes.

Photoelectroactivity of oriented purple membrane layers attached to an ion exchange film has been investigated. The action spectrum of the photocurrent followed the absorption spectrum of bacteriorhodopsin. The intactness of structure and function of bacteriorhodopsin was demonstrated by studies of absorption and photocycle kinetics. The direction of the photocurrent suggests that the extracellular surface of purple membrane is more positive. Photocurrents as high as 20 microA cm-2 were obtained in some preparations. The dependence of steady-state photocurrents on intensity of illumination and temperature was also studied. The initial rate of build-up of photocurrent depends linearly on the intensity of illumination while the off rate does not exhibit any dependence on the intensity of illumination. With rise in temperature an increase in the steady state photocurrent has been observed. This dependence was found to be linear when increase of the photocurrent due to proton translocation alone was considered.     

Dissecting the hybridization of oligonucleotides to structured complementary sequences

BackgroundWhen oligonucleotides hybridize to long target molecules, the process is slowed by the secondary structure in the targets. The phenomenon has been analyzed in several previous studies, but many details remain poorly understood.MethodsI used a spectrofluorometric strategy, focusing on the formation/breaking of individual base pairs, to study the kinetics of association between a DNA hairpin and > 20 complementary oligonucleotides (‘antisenses’).ResultsHybridization rates differed by over three orders of magnitude. Association was toehold-mediated, both for antisenses binding to the target's ends and for those designed to interact with the loop. Binding of these latter, besides being consistently slower, was affected to variable, non-uniform extents by the asymmetric loop structure. Divalent metal ions accelerated hybridization, more pronouncedly when nucleation occurred at the loop. Incorporation of locked nucleic acid (LNA) residues in the antisenses substantially improved the kinetics only when LNAs participated to the earliest hybridization steps. The effects of individual LNAs placed along the antisense indicated that the reaction transition state occurred after invading at least the first base pair of the stem.ConclusionsThe experimental approach helps dissect hybridization reactions involving structured nucleic acids. Toehold-dependent, nucleation–invasion models appear fully appropriate for describing such reactions. Estimating the stability of nucleation complexes formed at internal toeholds is the major hurdle for the quantitative prediction of hybridization rates.General significanceWhile analyzing the mechanisms of a fundamental biochemical process (hybridization), this work also provides suggestions for the improvement of technologies that rely on such process.     

Thermodynamic and Kinetic Characterization of Antisense Oligodeoxynucleotide Binding to a Structured mRNA

Antisense oligonucleotides act as exogenous inhibitors of gene expression by binding to a complementary sequence on the target mRNA, preventing translation into protein. Antisense technology is being applied successfully as a research tool and as a molecular therapeutic. However, a quantitative understanding of binding energetics between short oligonucleotides and longer mRNA targets is lacking, and selecting a high-affinity antisense oligonucleotide sequence from the many possibilities complementary to a particular RNA is a critical step in designing an effective antisense inhibitor. Here, we report measurements of the thermodynamics and kinetics of hybridization for a number of oligodeoxynucleotides (ODNs) complementary to the rabbit β-globin (RBG) mRNA using a binding assay that facilitates rapid separation of bound from free species in solution. A wide range of equilibrium dissociation constants were observed, and association rate constants within the measurable range correlated strongly with binding affinity. In addition, a significant correlation was observed of measured binding affinities with binding affinity values predicted using a thermodynamic model involving DNA and RNA unfolding, ODN hybridization, and RNA restructuring to a final free energy minimum. In contrast to the behavior observed for hybridization of short strands, the association rate constant increased with temperature, suggesting that the kinetics of association are related to disrupting the native structure of the target RNA. The rate of cleavage of the RBG mRNA in the presence of ribonuclease H and ODNs of varying association kinetics displayed apparent first-order kinetics, with the rate constant exhibiting binding-limited behavior at low association rates and reaction-limited behavior at higher rates. Implications for the rational design of effective antisense reagents are discussed.     

A New Approach to Determine the Effect of Mismatches on Kinetic Parameters in DNA Hybridization Using an Optical Biosensor

We have demonstrated a simple yet direct method for determiningthe kinetic parameters in DNA-DNA interactions using biosensortechnology based on the surface plasmon resonance phenomenon;a technique that does not require complex DNA labeling. To determinethe effect of mismatches on the kinetics involved in DNA-DNAinteractions, DNA hybridization kinetics were monitored in realtime using synthetic oligonucleotides less than 20 bases inlength which contained either a complementary sequence or mismatchedbases. Upon analysis of the kinetic parameters obtained in oligonucleotidehybridization, we found that they were significantly affectedby the presence of mismatches as well as by their number andlocation in a DNA duplex. In addition, the presented biosensormethod is sensitive enough to detect kinetic effects causedby the presence of a single-mismatched base pair. Our findingsstrongly suggest that analysis of kinetic parameters involvedin DNA-DNA interactions is advantageous for detecting the presenceof mismatch base pairs in a DNA duplex.     

Digoxigenated oligonucleotide probes specific for simple repeats in DNA fingerprinting and hybridization in situ

Summary A fast, reproducible and non-hazardous technique for non-isotopic DNA fingerprinting is presented. The method is based on digoxigenated oligonucleotides, which are specific for simple repetitive DNA sequences. The use of digoxigenin/ anti-digoxigenin detection avoids many drawbacks inherent in e.g. the biotin/streptavidin system which often causes a poor signal-to-background ratio. Synthesis and purification of digoxigenated oligonucleotides and their use in filter hybridization are described in detail. Hybridization patterns obtained with four different radioactively labeled oligonucleotides have been compared with those of the respective digoxigenated probes. When slightly less stringent hybridization conditions are applied for digoxigenated oligonucleotides than for those labeled with ³²P, the signal intensities are satisfying but additional minor bands occur as a result of the reduced strigency. With one explainable exception, these bands increase the information content of the fingerprint. In addition, hybridization of the digoxigenated (CAC)₅ probe has been performed in situ with human metaphase chromosomes. The hybridization patterns in many mitoses resemble R-bands.     

Hybridization properties of immobilized nucleic acids.

The 5'-end attachment of oligonucleotides to dextran supports facilitates the study of the hybridization properties of an immobilized oligonucleotide system. The hybridization properties which were studied include: hybridization capacity and kinetics, hybridization-complex stability, and reagents influencing hybridization efficiency. Results of these experiments reveal that the hybridization efficiencies of support-bound oligonucleotides were 75-80% and 40-50% for single-stranded oligonucleotide targets and long double-stranded targets, respectively. These hybridization efficiencies are dependent upon prehybridizing the support-bound oligonucleotides with dextran sulfate. In addition, comparisons of the relative hybridization efficiencies of the support-bound oligonucleotide and nitrocellulose-based systems have been made which indicate a retention of 13-28% of target sequences on the filters and a detection efficiency of 8-20%.     

Liquid phase SPR imaging experiments for biosensors applications

Surface plasmon resonance (SPR) has recently gained attention as a label-free method for the detection of biological molecules binding onto functionalised surfaces. It is one of the most sensitive detection method for monitor variations in the thickness and refractive index in ultra-thin films. Here, the adsorption processes of oligonucleotides onto gold substrates have been investigated in aqueous buffer solution using SPR imaging measurements. The hybridization of a thiol-modified, single stranded oligonucleotide anchored to a gold surface via thiol group, with its complementary sequence has been observed and characterised monitoring the hybridization process by SPR equipment. In situ investigation of smallest changes in SPR imaging measurements dynamically performed in liquid phase in the presence of DNA complementary probes was performed. Infrared spectroscopy and scanning electron microscopy characterisation of the functionalised gold surfaces of the biosensor were compared with the images obtained by SPR experimental apparatus.     

Secondary structure in formylmethionine tRNA influences the site-directed cleavage of ribonuclease H using chimeric 2'-O-methyl oligodeoxyribonucleotides

In order to cleave RNA at specific positions in Escherichia coli formylmethionine tRNA, RNase H and complementary chimeric oligonucleotides consisting of DNA and 2'-O-methyl-RNA (Inoue et al. (1987) FEBS Lett. 215, 327] were used. Specific cleavages in the D loop, anticodon loop, T psi C loop, anticodon stem, and acceptor stem were investigated. Virtually unique hydrolyses with RNase H were observed at the T psi C loop, anticodon stem, and acceptor stem when relatively longer chimeric oligonucleotides (20-mer) were used. An efficient cleavage at the anticodon was obtained with a chimeric 13-mer when the higher structure of the tRNA was broken by hybridization with a 20-mer at the acceptor as well as the T psi C stem region. It was found that stabilities of hybrids with chimeric oligonucleotides and the presence of minor nucleosides affect the cleavage of tRNA by this approach.     

DNA Sequencing by Hybridization to Oligonucleotide Matrix. Calculation of Continuous Stacking Hybridization Efficiency

Abstract

In this paper we consider the efficiency of additional rounds of “continuous stacking” hybridization in DNA sequence reconstruction by hybridization with oligonucleotide matrix (SHOM). After the initial hybridization of target DNA with the matrix of oligonucleotides of fixed length L some additional hybridizations should be carried out in the presence of fluorescently labeled oligonucleotides of another length l. These additional oligonucleotides can hybridize in tandem with matrix tuples (continuous stacking hybridization) thus forming an extended duplex with the target DNA strand. The additional data obtained allows resolutions of branching points arising in the reconstruction procedure. Multiple rounds of continuous stacking hybridization considerably increase the efficiency of the sequencing method, eventually approaching the power of (L+l)-matrix. We develop here an algorithm that allows us to minimize the number of additional hybridization steps, by assembling sets of l-tuples to be added together in each round of continuous stacking hybridization. For SHOM using a matrix of octanucleotides, continuous stacking hybridization with pen- tanucleotides increases the length of unambiguously sequenced DNA from 200 to several thousands of base pairs.     

PNA-related oligonucleotide mimics and their evaluation for nucleic acid hybridization studies and analysis

DNA mimics containing phosphonate analogues of PNAs (pPNAs), particularly PNA-pPNA hybrids as well as hetero-oligomers consisted of pPNA units and PNA-like molecules on the base of trans-4-hydroxy-L-proline (HypNA) have been synthesized. The evaluation of their effectiveness in assays based on the hybridization technique in the comparison with natural oligonucleotides and classical PNAs has shown a high potential of these mimics as sensor molecules for nucleic acid based diagnostics and as molecular probes for mRNA isolation.     

Photomicrobial sensors for selective determination of phosphate

A photomicrobial sensor consisting of immobilized Chlorella vulgaris and an oxygen electrode has been developed for selective determination of phosphate. When 40 mM phosphate was added to the sensor system, the photocurrent increased to a maximum under light irradiation with a response time of 1 min. The current increased with increasing phosphate concentration in the range 8–70 mM. Selectivity of the sensor was satisfactory. Good agreement was obtained between the phosphate concentrations in lake water determined by the photomicrobial sensor and by conventional colorimetry (correlation coefficient 0.96).     

Glucose sensor with improved haemocompatibilty

A new biocompatible copolymer has been synthesised and used in an electrochemical enzyme-based glucose sensor. The copolymer incorporates three segments including a monomer with an electrically neutral phosphorylcholine head group that is able to reject protein adsorption and two segments that increase the affinity to polyurethane substrate. Peel and solution circulation tests showed that this material has high attachment to polyurethane. With the new copolymer as the outermost layer and the polyurethane as the diffusion-limiting membrane, the sensor showed extended linearity up to 50 mM glucose and stable output in bovine serum for 70 h. During in vivo tests, the sensor exhibited a steady current signal and a rapid transient response when the glucose concentration was raised. These results imply that the haemocompatibility of the glucose sensor coated with the new copolymer has been improved, which is crucial for a sensor used for clinical real-time monitoring. The material may also be suitable for application to other implantable devices.     

Investigating oligonucleotide hybridization at subnanomolar level by surface plasmon resonance biosensor method

We have optimized surface plasmon resonance (SPR) biosensor technology for a rapid, direct, and low-consumption label-free multianalyte screening of synthetic oligonucleotides (ONs) with modified internucleotide linkages potentially applicable in antisense therapy. Monitoring of the ONs hybridization is based on the formation of complex between the natural oligonucleotide probe immobilized on the sensor surface and the ON in solution in contact with the sensor surface. An immobilization chemistry utilizing the streptavidin-biotin interaction was employed to obtain desired ligand density and high hybridization efficiency. It was demonstrated that the sensor is capable of detecting complementary 23-mer ONs in concentrations as low as 0.1 nM with high specificity and reproducibility.     

The effect of surface probe density on DNA hybridization

The hybridization of complementary strands of DNA is the underlying principle of all microarray-based techniques for the analysis of DNA variation. In this paper, we study how probe immobilization at surfaces, specifically probe density, influences the kinetics of target capture using surface plasmon resonance (SPR) spectroscopy, an in situ label-free optical method. Probe density is controlled by varying immobilization conditions, including solution ionic strength, interfacial electrostatic potential and whether duplex or single stranded oligonucleotides are used. Independent of which probe immobilization strategy is used, we find that DNA films of equal probe density exhibit reproducible efficiencies and reproducible kinetics for probe/target hybridization. However, hybridization depends strongly on probe density in both the efficiency of duplex formation and the kinetics of target capture. We propose that probe density effects may account for the observed variation in target-capture rates, which have previously been attributed to thermodynamic effects.