Electrically Tunable Fiber Optic Sensor Based on Surface Plasmon Resonance

The response of optical fiber surface plasmon resonance (SPR) sensor to potential is monitored in real time. The potential-induced reflectance of a gold-coated optical fiber SPR probe is dependent on potential step width and ionic strength. Wider potential step and stronger ionic strength are generally able to enhance the reflectance and accelerate the response time. The specifically adsorptive anion Cl^? provides a pronounced effect on a potential-dependent SPR probe. The exclusive contact of the SPR probe with anion Cl^? could significantly slow down the optical response. The work offers opportunities for optical fiber SPR probes to characterize the electrochemical application.     

Surface Plasmon Resonance Based Fiber Optic Ammonia Sensor Utilizing Bromocresol Purple

In this paper, a surface plasmon resonance (SPR) based fiber optic ammonia gas sensor has been designed and fabricated using bromocresol purple (BCP) as sensing element. The sensor works under wavelength modulation scheme. The detection of ammonia gas has been carried out at room temperature. Three different kinds of film coating configurations, namely silver + BCP, gold + BCP, and silver + silicon + BCP on the unclad portion of the fiber have been used for studying the role of each layer. Further, to optimize the performance of the sensor, the films of varying thicknesses were coated using thermal evaporation technique. Experiments have been performed for the ammonia concentrations ranging from 0 to 150 ppm around the probe. To record the SPR spectrum, light from a polychromatic source is launched in the fiber and the spectrum is recorded at the other end of the fiber. The spectrum has a peak at lower wavelength while a dip at the higher wavelength. The dip corresponds to SPR while the peak appears to be due to fluorescence properties of the dye. It has been observed that as the ammonia gas comes in contact of the BCP layer, it changes the refractive index of the BCP dye which, in turn, changes the resonance wavelength. Further, the change in refractive index increases as the concentration of ammonia gas increases up to certain concentration of ammonia after that it saturates. Silicon layer has been shown as a protection layer for silver and gold from oxidation and acts as a tuner of wavelength. The proposed ammonia sensor has small response as well as recovery time.     

Graphene-MoS2 Hybrid Structure Enhanced Fiber Optic Surface Plasmon Resonance Sensor

Plasmonics - In this paper, a fiber optic surface plasmon resonance sensor based on graphene-MoS2 hybrid structure is presented. The wavelength interrogation method is employed to analyze the...     

Graphene/Au-Enhanced Plastic Clad Silica Fiber Optic Surface Plasmon Resonance Sensor

Owing to its large surface-to-volume ratio and good biocompatibility, graphene has been identified as a highly promising candidate as the sensing layer for fiber optic sensors. In this paper, a graphene/Au-enhanced plastic clad silica (PCS) fiber optic surface plasmon resonance (SPR) sensor is presented. A sheet of graphene is employed as a sensing layer coated around the Au film on the PCS fiber surface. The PCS fiber is chosen to overcome the shortcomings of the structured microfibers and construct a more stable and reliable device. It is demonstrated that the introduction of graphene can enhance the intensity of the confined electric field surrounding the sensing layer, which results in a stronger light-matter interaction and thereby the improved sensitivity. The sensitivity of graphene-based fiber optic SPR sensor exhibits more than two times larger than that of the conventional gold film SPR fiber optic sensor. Furthermore, the dynamic response analyses reveal that the graphene/Au fiber optic SPR sensor exhibits a fast response (5 s response time) and excellent reusability (3.5% fluctuation) to the protein biomolecules. Such a graphene/Au fiber optic SPR sensor with high sensitivity and fast response shows a great promise for the future biochemical application.     

Influence of Dielectric Coating on Performance of Surface Plasmon Resonance Sensor

Plasmonics - In the present study, the nature of dielectric layer above metal layer in surface plasmon resonance sensor is investigated. The performance-defining parameters, i.e., shift in...     

Extra-broad Photonic Crystal Fiber Refractive Index Sensor Based on Surface Plasmon Resonance

Plasmonics - We propose and investigate a photonic crystal fiber (PCF) refractive index sensor with triangular lattice and four large-size channels based on surface plasmon resonance. In such...     

Sensitivity of Optical Fiber Sensor Based on Surface Plasmon Resonance: Modeling and Experiments

In this paper, surface plasmon resonance curves of an optical fiber-based sensor were investigated. From an experimental and theoretical perspective, the response curves were analyzed and discussed. Precisely, such curves were calculated by modeling the analyte/metallic layer interface using a multilayer system, including the effects of roughness. Then, the experimental response curves observed in solutions with different refractive indices were compared to the simulated curves. Good agreement was obtained with respect to the resonance peak location and the shape of the curves. Consequently, these results enabled us to predict the ideal functioning conditions of the sensor, i.e., the working parameters corresponding to the best sensitivities of detection.     

Highly Sensitive Dual-core Photonic Crystal Fiber Based on a Surface Plasmon Resonance Sensor with Gold Film

Plasmonics - A highly sensitive surface plasmon resonance (SPR) sensor comprising a dual-core photonic crystal fiber (PCF) is designed to detect minute changes in analyte refractive indices (RIs)...     

Design of a Single-Polarization Single-Mode Photonic Crystal Fiber Filter Based on Surface Plasmon Resonance

We design a single-polarization single-mode photonic crystal fiber filter based on surface plasmon resonance. The finite element method is employed to evaluate the characteristics of the filter. The proposed fiber is devised such that there is a great discrepant confinement loss between two polarizations of x and y by varying two air holes in the cladding region, which is composed of hexagonal structural air holes in pure silica selectively filling with gold wires. Numerical simulations show that single-polarization single-mode operation waveband can be tuned by adjusting the parameters of the photonic crystal fiber. The confinement losses of the unwanted polarization can reach to 126.10 and 326.30 dB/cm in the wavelengths of 1.31 and 1.55 μm, while the corresponding confinement losses of the wanted polarized mode are only 0.08 and 1.20 dB/cm, respectively. Furthermore, the crosstalk can come to a maximum of 120.34 and 310.41 dB in the two communication bands. The bandwidths of the fiber designed for 1.31 and 1.55 μm are, respectively, 20 and 60 nm, which may be found useful applications for fiber polarizer.     

Tunable Surface Plasmon Resonance Sensor Based on Photonic Crystal Fiber Filled with Gold Nanoshells

We present a photonic crystal fiber (PCF)-based surface plasmon resonance (SPR) sensor, whose operating wavelength range is tunable. Gold nanoshells, consisting of silica cores coated with thin gold shells, are designed to be the functional material of the sensor because of their attractive optical properties. It is demonstrated that the resonant wavelength of the sensor can be precisely tuned in a broad range, 660 nm to 3.1 μm, across the visible and near-infrared regions of the spectrum by varying the diameter of the core and the thickness of the shell. Furthermore, the effects of structural parameters of the sensor on the sensing properties are systematically analyzed and discussed based on the numerical simulations. It is observed that a high spectral sensitivity of 4111.4 nm/RIU with the resolution of 2.45 × 10^?5 RIU can be achieved in the sensing range of 1.33–1.38. These features make the sensor of great importance for a wide range of applications, especially in biosensing.     

Surface Plasmon Resonance-Based Tapered Fiber Optic Sensor: Sensitivity Enhancement by Introducing a Teflon Layer Between Core and Metal Layer

Surface plasmon resonance (SPR)-based tapered fiber optic sensor with Teflon as a dielectric sandwiched between metal and tapered fiber core is proposed. The sensitivity of the sensor has been maximized using different combinations of metal and Teflon layer thicknesses for a given taper ratio. The study shows that the sensitivity of the sensor with the introduction of dielectric (Teflon) increases with the increase in the taper ratio. The maximum sensitivity achieved for a given taper ratio is around 15 times higher than the general SPR-based fiber optic sensor.     

Highly Sensitive Surface Plasmon Resonance Based D-Shaped Photonic Crystal Fiber Refractive Index Sensor

In this article, a D-shaped photonic crystal fiber based surface plasmon resonance sensor is proposed for refractive index sensing. Surface plasmon resonance effect between surface plasmon polariton modes and fiber core modes of the designed D-shaped photonic crystal fiber is used to measure the refractive index of the analyte. By using finite element method, the sensing properties of the proposed sensor are investigated, and a very high average sensitivity of 7700 nm/RIU with the resolution of 1.30 × 10^?5 RIU is obtained for the analyte of different refractive indices varies from 1.43 to 1.46. In the proposed sensor, the analyte and coating of gold are placed on the plane surface of the photonic crystal fiber, hence there is no necessity of the filling of voids, thus it is gentle to apply and easy to use.     

Highly Sensitive Refractive Index Sensor Based on Four-Hole Grapefruit Microstructured Fiber with Surface Plasmon Resonance

Plasmonics - A highly sensitive refractive index (RI) sensor based on four-hole grapefruit fiber with surface plasmon resonance (SPR) has been proposed and theoretically investigated. By coating...     

Analysis of Dual-Core Photonic Crystal Fiber Based on Surface Plasmon Resonance Sensor with Segmented Silver Film

Plasmonics - A dual-core photonic crystal fiber (PCF) based on surface plasmon resonance (SPR) sensor with segmented silver film (silver nanoslit) deposited in microfluidic channel is designed. The...     

Localized Surface Plasmon Resonance-Based Fiber Optic U-Shaped Biosensor for the Detection of Blood Glucose

In the present study, we report the first fiber optic glucose sensor utilizing localized surface plasmon resonance of metal nanoparticles. The fiber was bent in the form of a U-shaped probe for point detection and sensitivity enhancement. The probe was prepared by first attaching gold nanoparticles on the optical fiber core and then immobilizing glucose oxidase over it. The sensor operates in the intensity modulation scheme in which the absorbance is measured with respect to the changes in the glucose concentration. The presence of glucose in the vicinity of the sensing region changes the refractive index of the film due to the chemical reactions with glucose oxidase. The absorbance of the metal nanoparticle changes significantly due to local refractive index change. The fiber optic U-shaped probes of different bending radii were fabricated and it has been found that the probe with bending radius around 0.982?mm possesses the maximum sensitivity. The response of the sensor is fast and requires very small volume of sensing sample (??150???l) which makes it more suitable for commercialization and better than present commercial sensors, which require about 1.5?ml of blood for the detection of glucose.     

Materials Effect in Sensing Performance Based on Surface Plasmon Resonance Using Photonic Crystal Fiber

Plasmonics - This article explores the effect of sensing performances with subject to change in different types of material and this study is carried out by the support of plasmon-coated photonic...     

Optical Fiber Micro-Taper with Circular Symmetric Gold Coating for Sensor Applications Based on Surface Plasmon Resonance

We describe a novel, fully symmetrical deposition method, based on a sputtering technique and use of a gold ring target for deposition of a gold layer uniform around the taper waist. With such a circular symmetric coating, the plasmon resonance effect in the fiber taper becomes completely independent of the polarization of the illuminating light. We have measured the complex refractive index of such sputtered gold layers. On this basis, model calculations have been performed to describe the plasmon resonance as a function of taper waist diameter, gold layer thickness, analyte interaction length, and analyte refractive index. Optimized parameters especially for measurement in aqueous solutions are derived from these theoretical calculations. Experimental results are shown to be in good agreement with the theoretical analysis.     

Refractive Index Sensor Based on Surface Plasmon Resonance Excitation in a D-Shaped Photonic Crystal Fiber Coated by Titanium Nitride

Plasmonics - In this paper, a plasmonic refractive index sensor using a D-shaped photonic crystal fiber coated by titanium nitride has been proposed. The interaction and interplay between fiber...