Reinitiation of chromosome replication in the presence of chloramphenicol under an integratively suppressed state by R6K.

The autonomous replication of an R plasmid, R6K (amp, str) was shown not to be affected by chloramphenicol. It provoked integrative suppression and gave rise to Hfr strains when integrated into the chromosome of a strain of Escherichia coli K-12 with a temperature-sensitive mutation in the gene, dnaA. An Hfr strain designated as Hfr(R6K) no. 1 was thus obtained and characterized. It was not completely stable as shown by a plating efficiency of 0.6 at 42 C relative to that at 30 C. The density labeling and the ultracentrifugation analysis suggested that the deoxyribonucleic acid replication in this Hfr strain did not stop immediately after completion of the round already started before temperature shift-up and the addition of chloramphenicol. These observations are discussed in relation to a possibility that the chromosome replication of this Hfr strain is under the control of the integrated plasmid at a nonpermissive temperature.     

Genetic loci responsible for incompatibility on a co-integrate plasmid, R100-1.

An R plasmid, R100-1, was mapped previously (Yoshikawa, 1974) by transduction from an integratively suppressed Hfr strain to a recipient with a mutation in gene dnaA. By this method various types of transductants of plasmid R100-1 that exist autonomously or in the integrated state were obtained. Seventy-one such transductants were used in the present study to map gene inc, which is responsible for incompatibility. The results obtained can be explained by either of the following: (i) R100-1 has only a single gene or gene cluster (inc) despite previous work suggesting that this plasmid is a co-integrate of two replicons; (ii) R100-1 possesses more than one inc locus located between the repA and tra loci.     

Suppression of an Escherichia coli dnaA mutation by the integrated R factor R.100.1: Change of chromosome replication origin in synchronized cultures.

We have followed, by deoxyribonucleic acid-deoxyribonucleic acid hybridization, the order of replication of three chromosomal markers during a synchronous round of replication in three strains of Escherichia coli carrying a dnaAts mutation: one strain in which the F-like R factor R.100.1 was established as a plasmid and two strains in which the dnaA mutation was suppressed by the integration of R.100.1 into the chromosome. In the R+ strain at 30C, replication of the plasmid took place simultaneously with the initiation of chromosome replication at the normal origin. In the integratively suppressed Hfr strains, at 42.5 C, chromosome replication was initiated preferentially from the integrated plasmid; little or no initiation occurred at the normal origin. Similar results were obtained for the one strain tested at 30 C. For both Hfr strains at 42.5 C, the data suggest that at least part of the population replicated bidirectionally. This conclusion had been confirmed using an autoradiographic procedure. Both types of experiment indicate a wide variation in the rate of travel of individual replication forks within the population.     

Chromosome-plasmid interaction in Escherichia coli K-12 carrying a thermosensitive plasmid, Rts1, in autonomous and in integrated states.

An Hfr strain of Escherichia coli K-12 was obtained by integrative suppression with a thermosensitive plasmid, Rts1. The R plasmid was integrated into the chromosome between rif and thr, and transfer of the chromosome occurred counterclockwise. The thermosensitivity of host cell growth due to the dnaA mutation was markedly but not completely reduced in this integratively suppressed Hfr strain. When the dnaA mutation was removed by transducing the dnaA+ genome to this Hfr, the thermosensitivity of cell growth due to existence of Rts1 was suppressed in contrast to strains carrying it autonomously. Thermosensitivity of cell growth appeared again when the plasmid was detached from the chromosome to exist autonomously. Contrary to the effect on cell growth, the transfer of the chromosome and the plasmid itself and the ability to "restrict" T-even phages were still thermosensitive in all of these strains carrying Rts1, irrespective of its state of existence. The detached plasmid as well as the original Rts1 were segregated upon growth at 42 C. These data are discussed in relation to chromosome-plasmid interaction. One of the most important conculusions is that some plasmid genes, related to their replication, are phenotypically suppressed by the chromosome when it is integrated.     

Formation of stable Hfr strains in R factor RP1 integration with the chromosome of E. coli K12 recA and their use for R-plasmid selection

Analysis of thermoindependent derivatives of E. coli K12 JC1553 recA (p VD1) carrying a replication thermostable mutant pVD1 of R factor RP1 IncP Ap Km Tc showed that formation of about 5 per cent of them was associated with stable integration of the plasmid with the bacterial chromosome. The respective bacteria had the following features: (1) preserved all the markers of plasmid pVD1, (2) according to the data of the electrophoretic analysis had no extrachromosomal DNA on prolonged cultivation under nonselective conditions, (3) were effective donors of the chromosomal genes, (4) had a low rate of the plasmid marker transfer on crossing with R- recipient. The latter feature was suggested to be used as a test for identification of stable Hfr strains. Investigation of the properties of the transconjugants obtained on crossing of stable Hfr strains with R-recipients rec+ showed that same of them had plasmid DNA with a higher molecular mass as compared to that of plasmid pVD1 DNA. The presence of this DNA was connected with formation of R' plasmid as a result of an irregular exclusion of plasmid pVD1 from the chromosome of stable Hfr bacteria. On the basis of the results a simple method was proposed for selection of R' plasmids having a number of advantages over the classical ones. The perspectives of using thermostable derivatives of RP1 for cloning the chromosome genes are discussed.     

Integration of the RP4 factor with the chromosome in Escherichia coli K12 and the formation of 2 types of Hfr-strains]

The mutant RP4ts12, derived from the R-factor RP4 and thermosensitive in replication, is incorporated into the chromosome A3dna(ts) of E. coli K12, thus suppressing dnaA mutation. The integration of this factor into the chromosome leads to the formation of Hfr strains of two types: the strains of the first type transfer plasmid markers to recipient cells earlier than to chromosomal ones; the strains of the second type transfer plasmid markers to recipient cells after chromosomal ones. During conjugation the R-factor integrated into the chromosome dissociates from chromosomal DNA introduced into the recipient cell and becomes autonomous.     

Identification, characterization, and nucleotide sequence of a region of Enterococcus faecalis pheromone-responsive plasmid pAD1 capable of autonomous replication.

A 5-kbp region of pAD1, previously shown to be capable of supporting replication, copy control, and stable inheritance of the plasmid, was cloned into a replicon probe vector and subjected to transposon insertional mutagenesis. Transposon inserts identifying essential replication, copy control, and stability functions were isolated. Deletion of stability functions not essential for replication resulted in delimitation of a basic replicon. The complete DNA sequence of this approximately 3-kbp region and the precise positions of several transposon inserts were determined, and the phenotypic effects of the transposon inserts were correlated with the physical locations of individual determinants. The following three genes, apparently involved in plasmid maintenance, were identified; repA, which encodes a protein required for replication; repB, which encodes a protein involved in copy control; and repC, which may be involved in stable inheritance. In addition, two clusters of repeats composed of a consensus sequence, TAGTARRR, were identified, one located between the divergently transcribed repA and repB genes and another located downstream of repC. The region between repA and repB contained 25 repeats divided into two subregions of 13 and 12 repeats separated by 78 bp. The region located downstream of repC contained only three repeats but may be essential for plasmid replication, since deletion of this determinant resulted in loss of ability to replicate in Enterococcus faecalis. We hypothesize that the repeat units represent protein-binding sites required for assembly of the replisome and control of plasmid copy number. Another region of unrelated repeat units that may also be involved in replication is located within the repA gene. Possible mechanisms of action of these determinants are discussed.     

Origin binding activity of the Mycobacterial plasmid pAL5000 replication protein RepB is stimulated through interactions with host factors and coupled expression of repA

The minimal replication region of the mycobacterial plasmid pAL5000 encompasses the replication origin (ori) and two tandemly organized replication genes, repA and repB, the functions of which are not clearly known. It was observed that when the repA and repB genes were expressed in Escherichia coli, a strong ori binding activity was generated in the host cells. Inactivation of repB led to a complete loss of activity, whereas inactivation of repA had a partial effect, indicating that while repB plays an important role in the process, its activity is stimulated through coexpression of repA. However, this stimulatory effect could be demonstrated only when expression of repA and that of repB were coupled. At a relatively high concentration (1,000 nM), the purified RepB protein was found to form an ori complex with low specificity, which was sensitive to high salt concentrations and challenge by a nonspecific competitor. In contrast, the complex formed by an extract of repA-repB-expressing cells was highly specific and was resistant to both types of challenges. At a 10-fold-lower concentration, RepB did not exhibit ori binding activity, but it could nevertheless form a salt-resistant ori complex in vitro, provided that host factors were present. Antibody supershift experiments indicated that RepB is a key component of the specific complex formed by extracts prepared from E. coli cells expressing the repA and repB genes and also from mycobacterial cells harboring pAL5000-derived vectors. The results indicate that in vivo RepB interacts with host factors and forms an ori complex, but this activity is maximal only when there is coupled expression of repA.     

Isolation of a new broad-host-range IncQ-like plasmid, pTC-F14, from the acidophilic bacterium Acidithiobacillus caldus and analysis of the plasmid replicon

A moderately thermophilic (45 to 50 degrees C), highly acidophilic (pH 1.5 to 2.5), chemolithotrophic Acidithiobacillus caldus strain, f, was isolated from a biooxidation process used to treat nickel ore. Trans-alternating field electrophoresis analysis of total DNA from the A. caldus cells revealed two plasmids of approximately 14 and 45 kb. The 14-kb plasmid, designated pTC-F14, was cloned and shown by replacement of the cloning vector with a kanamycin resistance gene to be capable of autonomous replication in Escherichia coli. Autonomous replication was also demonstrated in Pseudomonas putida and Agrobacterium tumefaciens LBA 4404, which suggested that pTC-F14 is a broad-host-range plasmid. Sequence analysis of the pTC-F14 replicon region revealed five open reading frames and a replicon organization like that of the broad-host-range IncQ plasmids. Three of the open reading frames encoded replication proteins which were most closely related to those of IncQ-like plasmid pTF-FC2 (amino acid sequence identities: RepA, 81%; RepB, 78%; RepC, 74%). However, the two plasmids were fully compatible and pTC-F14 represents a new IncQ-like plasmid replicon. Surprisingly, asymmetrical incompatibility was found with the less closely related IncQ plasmid R300B derivative pKE462 and the IncQ-like plasmid derivative pIE1108. Analysis of the pTC-F14 oriV region revealed five direct repeats consisting of three perfectly conserved 22-bp iterons flanked by iterons of 23 and 21 bp. Plasmid pTC-F14 had a copy number of 12 to 16 copies per chromosome in both E. coli, and A. caldus. The rep gene products of pTC-F14 and pTF-FC2 were unable to functionally complement each other's oriV regions, but replication occurred when the genes for each plasmid's own RepA, RepB, and RepC proteins were provided in trans. Two smaller open reading frames were found between the repB and repA genes of pTC-F14, which encode proteins with high amino acid sequence identity (PasA, 81%; PasB, 72%) to the plasmid addiction system of pTF-FC2. This is the second time a plasmid stability system of this type has been found on an IncQ-like plasmid.     

Isolation of an Hfr donor of Pseudomonas aeruginosa PAO by insertion of the plasmid RP1 into the tryptophan synthase gene

Summary A derivative of the IncP-1 plasmid RP1, temperature-sensitive for maintenance, was inserted into the Pseudomonas aeruginosa chromosome by selection for a plasmid marker (carbenicillin resistance) at nonppermissive temperature. In one strain, PAO 1000, the plasmid was stably integrated in the trpA, B gene cluster mapped at 27 min, as shown by the following evidence. (i) Trp⁺ transductants lost all plasmid markers. (ii) Cleared lysates of PAO 1000 showed no plasmid band typical of the autonomous RP1 in agarose gel electrophoresis. (iii) No transfer of carbenicillin resistance by PAO 1000 was detectable. (iv) PAO 1000 mobilised the chromosome from an origin at, or very near, the plasmid insertion site with high frequency (recovery of proximal markers 10^–3 per donor). Matings on the plate with and without interruption of conjugation showed that chromosome transfer was unidirectional. (v) Recombinants from PAO 1000-mediated crosses did not inherit plasmid markers or the trpA, B mutation. A derivative of PAO 1000 was obtained which had lost the Hfr property and all plasmid markers except carbenicillin resistance. This strain (PAO 1001), when carrying the autonomous RP1 plasmid, was capable of unidirectional chromosome mobilisation like PAO 1000, but with 50-fold lower efficiency. We propose that integration of the temperature-sensitive RP1 plasmid in PAO 1000 occurred via transposition of Tnl, the element specifying carbenicillin resistance.     

Molecular organization of the minimal replicon of novel, narrow-host-range, lactococcal plasmid pCI305

Plasmid pCI305 is an 8.7-kb, narrow-host-range, cryptic plasmid originating from Lactococcus lactis subsp. lactis UC317. The nucleotide sequence of the pCI305 replication region was determined. A single open reading frame of 1158 bp was identified in the trans-active domain repB. The size of the predicted repB protein (46 kDa) is in close agreement with the size of the repB product visualized in vivo in Escherichia coli when repB was placed under control of the inducible phi T7 RNA polymerase promoter. In vivo substitution of the native repB promoter sequence with a Tn5-derived promoter sequence was demonstrated. repA, a 344-bp cis-acting region which is the probable pCI305 replication origin region, was noncoding, was AT-rich, and possessed a unique set of inverted and direct repeat sequences. No significant homology between repA or repB and other gram-positive replication regions was evident. Combined with the absence of a detectable single-stranded DNA intermediate during replication, these results indicate that the pCI305 replication region differs markedly from most gram-positive replicons examined to date. The presence on other lactococcal plasmids of replication regions related to that of pCI305 was demonstrated.     

Structural elements required for replication and incompatibility of the Rhizobium etli symbiotic plasmid

The symbiotic plasmid of Rhizobium etli CE3 belongs to the RepABC family of plasmid replicons. This family is characterized by the presence of three conserved genes, repA, repB, and repC, encoded by the same DNA strand. A long intergenic sequence (igs) between repB and repC is also conserved in all members of the plasmid family. In this paper we demonstrate that (i) the repABC genes are organized in an operon; (ii) the RepC product is essential for replication; (iii) RepA and RepB products participate in plasmid segregation and in the regulation of plasmid copy number; (iv) there are two cis-acting incompatibility regions, one located in the igs (incalpha) and the other downstream of repC (incbeta) (the former is essential for replication); and (v) RepA is a trans-acting incompatibility factor. We suggest that incalpha is a cis-acting site required for plasmid partitioning and that the origin of replication lies within incbeta.     

oriT-directed cloning of defined large regions from bacterial genomes: identification of the Sinorhizobium meliloti pExo megaplasmid replicator region

We have developed a procedure to directly clone large fragments from the genome of the soil bacterium Sinorhizobium meliloti. Specific regions to be cloned are first flanked by parallel copies of an origin of transfer (oriT) together with a plasmid replication origin capable of replicating large clones in Escherichia coli but not in the target organism. Supplying transfer genes in trans specifically transfers the oriT-flanked region, and in this process, site-specific recombination at the oriT sites results in a plasmid carrying the flanked region of interest that can replicate in E. coli from the inserted origin of replication (in this case, the F origin carried on a BAC cloning vector). We have used this procedure with the oriT of the plasmid RK2 to clone contiguous fragments of 50, 60, 115, 140, 240, and 200 kb from the S. meliloti pExo megaplasmid. Analysis of the 60-kb fragment allowed us to identify a 9-kb region capable of autonomous replication in the bacterium Agrobacterium tumefaciens. The nucleotide sequence of this fragment revealed a replicator region including homologs of the repA, repB, and repC genes from other Rhizobiaceae, which encode proteins involved in replication and segregation of plasmids in many organisms.     

Formation of Escherichia coli Hfr strains by integrative suppression with the P group plasmid RP1.

Hfr strains of Escherichia coli were obtained by integrative suppression of a dnaA(Ts) mutation by the Inc P-1 plasmid RP1 without prior creation of an unnatural homology between the plasmid and the E. coli chromosome. Unmodified RP1 mobilized the polarized transfer of the chromosome in a counterclock-wise direction from a distinct origin between 81 min (pyrE) and 82 min (dnaA) with pyrE as a leading marker. Inheritance of RP1-Hfr chromosomal and antibiotic resistance genes was due to recombination with the recipient chromosome, as shown by the need for a functional recA system. The acquisition of temperature resistance and donor ability was accompanied by the disappearance of free plasmid when the selection pressure for integration was maintained (growth at 41 degrees C); the loss of temperature resistance and donor ability was accompanied by the reappearance of autonomous RP1 when the selection pressure was removed (growth at 30 degrees C).     

Transduction of R plasmids by bacteriophages P1 and P22

Summary We demonstrated that bacteriophages P1 and P22 were able to form various types of hybrids with six out of seven different R plasmids tested. When the same R plasmid was used for isolation, P1-R hybrids usually carried more resistance markers than P22-R. Several genetical observations suggest that the hybrid prophages carried the resistance markers transposed to the phage genomes without loss of essential phage genes. Upon UV-irradiation the prophages produced phage lysates that transduced the relevant resistance markers at high frequencies by lysogenic conversion. The insertion of the resistance markers was even acquired by the P1 or P22 genomes during one-step growth in R⁺ cells. Some lytically prepared lysates grown on R⁺ cells contained the hybrids at a frequency of 10^-7 to 10^-6/plaqueforming unit. Analysis of P1-transductants for resistance markers of the R plasmids revealed in some cases more specialized transductants than generalized transductants. These results strongly indicate that a precise genetic map of an R plasmid can not be established only on the basis of co-transduction frequencies of the resistance markers of the R plasmid.     

Replication control of IncP plasmids

Clones of Escherichia coli with a chromosomally integrated RP4-prime plasmid were isolated and characterized. Chromosome transfer was increased about 50-fold and the Hfr still carried an autonomous plasmid indistinguishable from the original RP4-prime. This could be eliminated by pRP64 or R751, two distinguishably marked incompatible plasmids, giving rise to strains which stably retained the resistance patterns of both plasmids and which continued to transfer the chromosome at enhanced levels. In both cases, however, the copy number of the autonomous plasmid was reduced by the presence of a chromosomal RP4 such that the total number of P plasmid genomes (integrated and autonomous) remained constant. The results are consistent with the idea that copy number is controlled by diffusible inhibitors or initiators of replication.     

Integration of replication-defective R68.45-like plasmids into the Pseudomonas aeruginosa chromosome

R68.45 and other similar broad-host-range (IncP) plasmids carrying a tandem repeat of the 2.1 kb insertion element IS21 mobilize the chromosome of many different Gram-negative bacteria. To analyse the structure of R68.45-chromosome cointegrates, whose involvement in the mobilization process had been postulated previously, we selected for the stable integration of R68.45-like plasmids into the Pseudomonas aeruginosa chromosome. Two plasmids were chosen: pME28, a transfer-deficient, mobilizable RP1 derivative with an inactive replication control (trfA) gene, and pME487, an R68.45 derivative with a trfA(ts) mutation causing temperature-sensitive replication. Chromosomally integrated pME28 and pME487 were found to be flanked by single IS21 elements. This structure is in agreement with a 'cut-and-paste' mode of R68.45 transposition. pME28 and pME487 showed a low specificity of insertion but rarely (less than 0.1%) induced auxotrophic mutations. Hfr (high-frequency-of-recombination) donors of P. aeruginosa could be obtained by chromosomal integration of pME487 or pME28; in the latter case, the transfer functions lacking from pME28 had to be provided in trans on an autonomous plasmid. Hfr donors gave higher conjugational linkage and transferred longer stretches of the P. aeruginosa chromosome than did R68.45 donors. This suggests that the integration of R68.45 into the donor chromosome is short-lived in P. aeruginosa.     

Mutations affecting translational coupling between the rep genes of an IncB miniplasmid.

The nature of translational coupling between repB and repA, the overlapping rep genes of the IncB plasmid pMU720, was examined. Mutations in the start codon of the promoter proximal gene, repB, reduced the efficiency of translation of both rep genes. Moreover, there was no independent initiation of repA translation in the absence of repB translation. The position of the repB stop codon was crucial for the efficient expression of repA, with the wild-type positioning being optimal. Translational coupling was found to be totally dependent on the formation of a pseudoknot structure. A model which invokes formation of a pseudoknot to facilitate initiation of repA is proposed.