Efficient transposition of IS911 circles in vitro.

An in vitro system has been developed which supports efficient integration of transposon circles derived from the bacterial insertion sequence IS911. Using relatively pure preparations of IS911-encoded proteins it has been demonstrated that integration into a suitable target required both the transposase, OrfAB, a fusion protein produced by translational frameshifting between two consecutive open reading frames, orfA and orfB, and OrfA, a protein synthesized independently from the upstream orfA. Intermolecular reaction products were identified in which one or both transposon ends were used. The reaction also generated various intramolecular transposition products including adjacent deletions and inversions. The circle junction, composed of abutted left and right IS ends, retained efficient integration activity when carried on a linear donor molecule, demonstrating that supercoiling in the donor molecule is not necessary for the reaction. Both two-ended integration and a lower level of single-ended insertions were observed under these conditions. The frequency of these events depended on the spacing between the transposon ends. Two-ended insertion was most efficient with a natural spacing of 3 bp. These results demonstrate that transposon circles can act as intermediates in IS911 transposition and provide evidence for collaboration between the two major IS911-encoded proteins, OrfA and OrfAB.     

The interplay of mRNA stimulatory signals required for AUU-mediated initiation and programmed -1 ribosomal frameshifting in decoding of transposable element IS911

The IS911 bacterial transposable element uses -1 programmed translational frameshifting to generate the protein required for its mobility: translation initiated in one gene (orfA) shifts to the -1 frame and continues in a second overlapping gene (orfB), thus generating the OrfAB transposase. The A-AAA-AAG frameshift site of IS911 is flanked by two stimulatory elements, an upstream Shine-Dalgarno sequence and a downstream stem-loop. We show here that, while they can act independently, these stimulators have a synergistic effect when combined. Mutagenic analyses revealed features of the complex stem-loop that make it a low-efficiency stimulator. They also revealed the dual role of the upstream Shine-Dalgarno sequence as (i) a stimulator of frameshifting, by itself more potent than the stem-loop, and (ii) a mandatory determinant of initiation of OrfB protein synthesis on an AUU codon directly preceding the A6G motif. Both roles rely on transient base pairing of the Shine-Dalgarno sequence with the 3' end of 16S rRNA. Because of its effect on frameshifting, the Shine-Dalgarno sequence is an important determinant of the level of transposase in IS911-containing cells, and hence of the frequency of transposition.     

Cloning of insertion sequence IS1485 from Enterococcus species.

We have cloned and identified an insertion sequence, IS1485, that was present in several members of the genus Enterococcus. IS1485 exists in varying copy numbers with at least 12 copies in E. durans (ATCC 11576), 3 copies in E. faecium (ATCC 19434), and one copy each in E. faecalis (ATCC 19433) and E. avium (ATCC 14024). It was also detected in clinical strains of E. gallinarum, E. casseliflavus, and E. saccharolyticus. IS1485 is 1366 bp in length, it has imperfect terminal inverted repeats with 25 of the terminal 39 residues matched, and it contains three open reading frames exceeding 50 codons, designated orfA, orfB, and orfC. The largest, orfB, was located 36 bp downstream and in the -1 reading frame relative to orfA; orfC is oriented in the opposite direction and overlaps orfA. The genetic organization of IS1485 resembles that of members of the IS3 family of transposable elements. Sequence homology exists with several members of the IS3 family especially with IS199 from Streptococcus mutans.     

Two frameshift products involved in the transposition of bacterial insertion sequence IS629

IS629 is 1,310 bp in length with a pair of 25-bp imperfect inverted repeats at its termini. Two partially overlapping open reading frames, orfA and orfB, are present in IS629, and two putative translational frameshift signals, TTTTG (T4G) and AAAAT (A4T), are located near the 3'-end of orfA. With the lacZ gene as the reporter, both T4G and A4T motifs are determined to be a -1 frameshift signal. Two peptides representing the two transframe products designated OrfAB' and OrfAB, are identified by a liquid chromatography-tandem mass spectrometric approach. Results of transposition assays show that OrfAB' is the transposase and that OrfAB aids in the transposition of IS629. Pulse-chase experiments and Escherichia coli two-hybrid assays demonstrate that OrfAB binds to and stabilizes OrfAB', thus increasing the transposition activity of IS629. This is the first transposable element in the IS3 family shown to have two functional frameshifted products involved in transposition and to use a transframe product to regulate transposition.     

Characterisation of IS153, an IS3-family insertion sequence isolated from Lactobacillus sanfranciscensis and its use for strain differentiation

An insertion sequence has been identified in the genome of Lactobacillus sanfranciscensis DSM 20451T as segment of 1351 nucleotides containing 37-bp imperfect terminal inverted repeats. The sequence of this element encodes two out of phase, overlapping open reading frames, orfA and orfB, from which three putative proteins are produced. OrfAB is a transframe protein produced by -1 translational frame shifting between orf A and orf B that is presumed to be the transposase. The large orfAB of this element encodes a 342 amino acid protein that displays similarities with transposases encoded by bacterial insertion sequences belonging to the IS3 family. In L. sanfranciscensis type strain DSM 20451T multiple truncated IS elements were identified. Inverse PCR was used to analyze target sites of four of these elements, but except of their highly AT rich character not any sequence specificity was identified so far. Moreover, no flanking direct repeats were identified. Multiple copies of IS153 were detected by hybridization in other strains of L. sanfranciscensis. Resulting hybridization patterns were shown to differentiate between organisms at strain level rather than a probe targeted against the 16S rDNA. With a PCR based approach IS153 or highly similar sequences were detected in L. acidophilus, L. casei, L. malefermentans, L. plantarum, L. hilgardii, L. collinoides L. farciminis L. sakei and L. salivarius, L. reuteri as well as in Enterococcus faecium, Pediococcus acidilactici and P. pentosaceus.     

Transposase-induced excision and circularization of the bacterial insertion sequence IS911.

We have investigated the role of three IS911-specified proteins in transposition in vivo: the products of the upstream (OrfA) and downstream (OrfB) open reading frames, and a transframe protein (OrfAB) produced by -1 translational frameshifting between orfA and orfB. The production of OrfAB alone is shown to lead both to excision and to circularization of the element and to be sufficient for intermolecular transposition into a plasmid target. Simultaneous and independent production of OrfA is shown to stimulate OrfAB-mediated intermolecular transposition while greatly reducing the appearance of transposon circles. We have not been able to detect a role for OrfB. Although under certain conditions, the vector plasmid undergoes precise resealing after IS911 excision, the data suggest that this is not normally the case and that the donor plasmid is not generally conserved. The use of IS911 derivatives carrying mutations in the terminal 2 bp suggested that circle formation represents a site-specific intramolecular transposition event. We present a model which explains both intra- and intermolecular transposition events in terms of a single reaction mechanism of the 'cut and paste' type.     

Detection and characterization of a functional insertion sequence, ISVpa2, in Vibrio parahaemolyticus

PCR analysis of the pandemic strain of Vibrio parahaemolyticus, KX-V237 (total genome sequenced) showed a subculture where the size of the amplicons had increased. The purpose of this study was to analyze the mechanism of this change. We found a 1,243-bp DNA sequence inserted in one of the pandemic marker genes in this strain. The inserted DNA sequence possessed the genetic structures shared by insertion sequences (ISs) of the IS3 family. This IS had 26-bp imperfect terminal inverted repeats (IRs) and two partially overlapping reading frames, orfA and orfB. OrfA codes for a helix-turn-helix, OrfA and OrfAB produced by translational frameshifting code for leucine zipper motifs, and OrfB codes for a DDE motif. orfA and orfB were homologous to those in the IS3 family. This IS was named ISVpa2. Southern blot analysis showed the copy number of ISVpa2 in our stock culture and its subculture of KX-V237 was three and four, respectively; whereas it was only one in the reported genome sequence. Analysis of the flanking sequences for seven ISVpa2 copies showed ISVpa2 is capable of inserting at multiple sites and ISVpa2 causes genetic rearrangements including insertional inactivation of the target gene and adjacent deletion. ISVpa2 created 3-base duplications upon insertion. PCR, hybridization, and nucleotide sequence analyses showed ISVpa2 homologs were detected in all of the 62 other strains of V. parahaemolyticus examined; and in some strains of Vibrio vulnificus (98% identity), Vibrio penaeicida (86% identity), and Vibrio splendidus (87% identity); but was not in 25 other species in the genus Vibrio. The data demonstrate that ISVpa2 is a transpositionally active IS discovered for the first time in V. parahaemolyticus and suggest that ISVpa2 may be transferred among the species of the genus Vibrio.     

Nucleotide sequence of IS26, a new prokaryotic mobile genetic element.

The DNA sequence of a new IS element, the IS26, is 820 bp long and carries 14 bp perfect terminal inverted repeats. Upon integration, IS26 generates an 8 bp duplication of its target sequence. A large open reading frame within IS26 could code for a protein of 234 amino acids. On its reverse strand, IS26 also carries one large open reading frame, 591 bp long, which contains no stop codon within IS26.     

Characterisation of IS153, an IS3-family Insertion Sequence Isolated from Lactobacillus sanfranciscensis and its use for Strain Differentiation

An insertion sequence has been identified in the genome of Lactobacillus sanfranciscensis DSM 20451^T as segment of 1351 nucleotides containing 37-bp imperfect terminal inverted repeats. The sequence of this element encodes two out of phase, overlapping open reading frames, orfA and orfB, from which three putative proteins are produced. OrfAB is a transframe protein produced by –1 translational frame shifting between orf A and orf B that is presumed to be the transposase. The large orfAB of this element encodes a 342 amino acid protein that displays similarities with transposases encoded by bacterial insertion sequences belonging to the IS3 family.In L. sanfranciscensis type strain DSM 20451^T multiple truncated IS elements were identified. Inverse PCR was used to analyze target sites of four of these elements, but except of their highly AT rich character not any sequence specificity was identified so far. Moreover, no flanking direct repeats were identified. Multiple copies of IS 153 were detected by hybridization in other strains of L. sanfranciscensis. Resulting hybridization patterns were shown to differentiate between organisms at strain level rather than a probe targeted against the 16S rDNA. With a PCR based approach IS 153 or highly similar sequences were detected in L. acidophilus, L. casei, L. malefermentans, L. plantarum, L. hilgardii, L. collinoides L. farciminis L. sakei and L. salivarius, L. reuteri as well as in Enterococcus faecium, Pediococcus acidilactici and P. pentosaceus.     

Escherichia coli insertion sequence IS150: transposition via circular and linear intermediates

IS150, a member of the widespread IS3 family, contains two consecutive out-of-phase open reading frames, orfA and orfB, that partially overlap. These open reading frames encode three proteins, InsA, InsB, and the InsAB protein, which is jointly encoded by both open reading frames by means of programmed translational frameshifting. We demonstrate that the InsAB protein represents the IS150 element's transposase. In vivo, the wild-type IS150 element generates circular excision products and linear IS150 molecules. Circular and linear species have previously been detected with mutant derivatives of other members of the IS3 family. Our finding supports the assumption that these products represent true transposition intermediates of members of this family. Analysis of the molecular nature of these two species suggested that the circular forms are precursors of the linear molecules. Elimination of InsA synthesis within the otherwise intact element led to accumulation of large amounts of the linear species, indicating that the primary role of InsA may be to prevent abortive production of the linear species and to couple generation of these species to productive insertion events.     

Functional organization and insertion specificity of IS607, a chimeric element of Helicobacter pylori

A search by subtractive hybridization for sequences present in only certain strains of Helicobacter pylori led to the discovery of a 2-kb transposable element to be called IS607, which further PCR and hybridization tests indicated was present in about one-fifth of H. pylori strains worldwide. IS607 contained two open reading frames (ORFs) of possibly different phylogenetic origin. One ORF (orfB) exhibited protein-level homology to one of two putative transposase genes found in several other chimeric elements including IS605 (also of H. pylori) and IS1535 (of Mycobacterium tuberculosis). The second IS607 gene (orfA) was unrelated to the second gene of IS605 and might possibly be chimeric itself: it exhibited protein-level homology to merR bacterial regulatory genes in the first approximately 50 codons and homology to the second gene of IS1535 (annotated as "resolvase," apparently due to a weak short recombinase motif) in the remaining three-fourths of its length. IS607 was found to transpose in Escherichia coli, and analyses of sequences of IS607-target DNA junctions in H. pylori and E. coli indicated that it inserted either next to or between adjacent GG nucleotides, and generated either a 2-bp or a 0-bp target sequence duplication, respectively. Mutational tests showed that its transposition in E. coli required orfA but not orfB, suggesting that OrfA protein may represent a new, previously unrecognized, family of bacterial transposases.     

Characterization of a novel insertion sequence,IS<Emphasis Type="Italic">Bp1</Emphasis>, in<Emphasis Type="Italic"> Burkholderia pseudomallei</Emphasis>

During screening for antigenic proteins in Burkholderia pseudomallei, a novel insertion sequence, IS Bp1, was found by sequence similarity searches. IS Bp1 contains two overlapping ORFs of 261 bp ( orfA) and 852 bp ( orfB), encoding 87 and 284 amino acid residues, respectively, and an imperfect inverted repeat. The putative protein encoded by orfA (OrfA) is similar to the OrfA in insertion sequences of the IS 3 family in other bacteria, showing 49% and 76% amino acid identity and similarity, respectively, with the transposase encoded by IS D1 of Desulfovibrio vulgaris vulgaris. The putative protein encoded by orfB (OrfB) is similar to the OrfB in insertion sequences of the IS 3 family in other bacteria, showing 43% and 62% amino acid identity and similarity, respectively, with the transposase encoded by IS 1222 of Enterobacter agglomerans. Sequence analysis of OrfA showed the presence of an alpha-helix-turn-alpha-helix motif, as well as the putative leucine zipper at its 3' end, for possible DNA binding to the terminal inverted repeats. Sequence analysis of OrfB showed the presence of a DDE motif of aspartic acid, aspartic acid, and glutamic acid, a highly conserved motif present in OrfB of other members of the IS 3 family. Furthermore, several other conserved amino acid residues, including the arginine residue located seven amino acids downstream from the glutamic acid residue, were observed. PCR amplification of the IS Bp1 gene showed a specific band in 65% of the 26 B. pseudomallei strains tested. Southern blot hybridization after XhoI or SacI digestion showed nine different patterns of hybridization. The number of copies of IS Bp1 in those strains that possessed the insertion sequence ranged from three to 12. Using several insertion sequences and a combination of insertion-sequence-based and non-insertion-sequence-based methods such as ribotyping will probably increase the discriminatory power of molecular typing in B. pseudomallei.     

Transposition in Shigella dysenteriae: isolation and analysis of IS911, a new member of the IS3 group of insertion sequences.

Twenty-nine clear-plaque mutants of bacteriophage lambda were isolated from a Shigella dysenteriae lysogen. Three were associated with insertions in the cI gene: two were due to insertion of IS600, and the third resulted from insertion of a new element, IS911. IS911 is 1,250 base pairs (bp) long, carries 27-bp imperfect terminal inverted repeats, and generates 3-bp duplications of the target DNA on insertion. It was found in various copy numbers in all four species of Shigella tested and in Escherichia coli K-12 but not in E. coli W. Analysis of IS911-mediated cointegrate molecules indicated that the majority were generated without duplication of IS911. They appeared to result from direct insertion via one end of the element and the neighboring region of DNA, which resembles a terminal inverted repeat of IS911. Nucleotide sequence analysis revealed that IS911 carries two consecutive open reading frames which code for potential proteins showing similarities to those of the IS3 group of elements.     

Evolutionary dynamics of insertion sequences in Helicobacter pylori

Prokaryotic insertion sequence (IS) elements behave like parasites in terms of their ability to invade and proliferate in microbial gene pools and like symbionts when they coevolve with their bacterial hosts. Here we investigated the evolutionary history of IS605 and IS607 of Helicobacter pylori, a genetically diverse gastric pathogen. These elements contain unrelated transposase genes (orfA) and also a homolog of the Salmonella virulence gene gipA (orfB). A total of 488 East Asian, Indian, Peruvian, and Spanish isolates were screened, and 18 and 14% of them harbored IS605 and IS607, respectively. IS605 nucleotide sequence analysis (n = 42) revealed geographic subdivisions similar to those of H. pylori; the geographic subdivision was blurred, however, due in part to homologous recombination, as indicated by split decomposition and homoplasy tests (homoplasy ratio, 0.56). In contrast, the IS607 populations (n = 44) showed strong geographic subdivisions with less homologous recombination (homoplasy ratio, 0.2). Diversifying selection (ratio of nonsynonymous change to synonymous change, >1) was evident in approximately 15% of the IS605 orfA codons analyzed but not in the IS607 orfA codons. Diversifying selection was also evident in approximately 2% of the IS605 orfB and approximately 10% of the IS607 orfB codons analyzed. We suggest that the evolution of these elements reflects selection for optimal transposition activity in the case of IS605 orfA and for interactions between the OrfB proteins and other cellular constituents that potentially contribute to bacterial fitness. Taken together, similarities in IS elements and H. pylori population genetic structures and evidence of adaptive evolution in IS elements suggest that there is coevolution between these elements and their bacterial hosts.     

Identification and characterization of IS1381, a new insertion sequence in Streptococcus pneumoniae.

A new insertion sequence (IS1381) was identified in the genome of Streptococcus pneumoniae R6 as an 846-bp segment containing 20-bp terminal inverted repeats and flanked by 7-bp direct repeats. The three sequenced copies of this element have two overlapping open reading frame (ORF) genes named orfA and orfB. However, significant variations between individual copies were found, suggesting that inactivating mutations have occurred in an original single ORF. Accordingly, the consensus IS1381 element derived from the comparison of the three available copies should contain a single ORF sufficient to encode a basic protein of 267 amino acids which exhibited high similarity to the putative transposases of ISL2 from Lactobacillus helveticus and of IS702 from the cyanobacterium Calothrix sp. strain PCC 7601. A minimum of five to seven copies were detected by hybridization experiments in the R6 genome. In remarkable contrast with the two previously reported pneumococcal insertion sequences, several copies of IS1381 have been detected in all of the clinical isolates tested so far. Interestingly, Streptococcus oralis NCTC 11427 (type strain), a close relative of pneumococcus, does not contain this element, but its occurrence in the type strain of Streptococcus mitis (NCTC 12261) suggests that this species has exchanged DNA with S. pneumoniae directly or through an intermediate species.