Protein localization in Escherichia coli K-12: an analysis of ompC-lacZ gene fusions

Abstract Two conditionally expressed lacZU131 gene fusions were constructed in vivo to the ompC gene which encodes a major outer membrane protein in Escherichia coli . The resulting hybrid molecules contained approximately 25% and 50% of the mature OmpC protein fused to the LacZ. Export analysis showed that under nonoverproducing conditions essentially all synthesized OmpC-LacZ hybrid protein was effectively processed in vivo unless the signal peptide cleavage was inhibited by ethanol addition. Also, the hybrid proteins were highly accessible to solid phase iodination of whole cells under conditions where cytoplasmic proteins remained unlabelled. Thus, hybrids containing large portions of the OmpC protein were clearly recognized by the cellular export machinery, and probably all synthesized hybrid protein was partially translocated through the cytoplasmic membrane.     

Analysis of structure-function relationships in Escherichia coli K12 outer membrane porins with the aid of ompC-phoE and phoE-ompC hybrid genes

Summary To study structure-function relationships in the outer membrane pore proteins OmpC and PhoE of Escherichia coli K12, we have constructed a series of phoE-ompC hybrid genes in which DNA encoding part of one protein is replaced by the homologous part of the other gene. The hybrid gene products were incorporated normally into the outer membrane, allowing their functional characterization. Combined with previous studies, the present results permit the identification of regions involved in determining functions and properties in which the native PhoE and OmpC proteins differ, such as pore characteristics, receptor activity for phages and binding of monoclonal antibodies. Most of these properties were found to be determined by multiple regions clearly separated in the primary structure. The combined phage and antibody binding data have demonstrated that at least five distinct regions in PhoE and OmpC are exposed at the cell surface. The locations of these regions are in agreement with a previously proposed model for porin topology.     

Comparative analysis of the Salmonella typhi and Escherichia coli ompC genes

The nucleotide (nt) sequence of the gene encoding the Salmonella typhi OmpC outer membrane protein, and its deduced amino acid (aa) sequence are presented here. The S. typhi ompC gene consists of an open reading frame of 1134 nt, corresponding to a protein of 378 aa; with a 21-aa signal peptide. This protein is 11 aa longer than Escherichia coli OmpC, but it has an identical leader peptide. The mature OmpC sequence shows 79% similarity for both bacteria at the aa level, and 77% similarity at the nt level. Seven main variable regions in the OmpC protein were identified. Five of them correspond to hydrophilic regions and contain aa observed most frequently in turn configurations in soluble proteins. This suggests that these aa stretches could be located on the exterior of the outer membrane. To probe into the genus and species specificity of the main variable regions, we have constructed complementary oligodeoxyribonucleotides. The use of one of them with a small number of DNA samples is illustrated here; no restriction fragment length polymorphism or nt sequence heterogeneity could be found between S. typhi and Salmonella typhimurium.     

Localization of functional domains in E. coli K-12 outer membrane porins.

The genes ompC and phoE of Escherichia coli K-12 encode outer membrane pore proteins that are very homologous. To study the structure-function relationship of these proteins, we have constructed a series of ompC-phoE hybrid genes in which the DNA encoding part of one protein is replaced by the corresponding part of the other gene. These hybrid genes were easily obtained by using in vivo recombination. The fusion sites in the hybrid genes were localized by restriction enzyme mapping. The hybrid gene products were normally expressed and they were characterized with respect to functions and properties in which the native OmpC and PhoE proteins differ, such as pore characteristics, the receptor activity for phages and the binding of specific antibodies. Three regions within the N-terminal 130 amino acids were localized which determine pore characteristics and a segment between residues 75 and 110 contains amino acids which determine specificity for PhoE phages. A major cell surface-exposed region is located between residues 142 and 267. This region contains residues which are required for the binding of monoclonal antibodies directed against the cell surface-exposed part of PhoE and residues which determine specificity for OmpC phages.     

Aperiplasmic protein (Skp) of Escherichia coli selectively binds a class of outer membrane proteins

A search was performed for a periplasmic molecular chaperone which may assist outer membrane proteins of Escherichia coli on their way from the cytoplasmic to the outer membrane. Proteins of the periplasmic space were fractionated on an affinity column with sepharose-bound outer membrane porin OmpF. A 17kDa polypeptide was the predominant protein retained by this column. The corresponding gene was found in a gene bank; it encodes the periplasmic protein Skp. The protein was isolated and it could be demonstrated that it bound outer membrane proteins, following SDS-PAGE, with high selectivity. Among these were OmpA, OmpC, OmpF and the maltoporin LamB. The chromosomal skp gene was inactivated by a deletion causing removal of most of the signal peptide plus 107 residues of the 141-residue mature protein. The mutant was viable but possessed much-reduced concentrations of outer membrane proteins. This defect was fully restored by a plasmid-borne skp gene which may serve as a periplasmic chaperone.     

Construction of a series of ompC-ompF chimeric genes by in vivo homologous recombination in Escherichia coli and characterization of their translational products

Summary OmpC and OmpF are major outer membrane proteins and although they are homologous proteins, they function differently in several respects. As an approach to elucidate the submolecular structures that determine their differences, we have constructed a series of ompC-ompF chimeric genes by in vivo homologous recombination between these two genes, which are adjacent on a plasmid. The recombination sites in the chimeric genes were localized by means of restriction endonuclease analysis and nucleotide sequence determination. Most of the chimeric gene products were accumulated in the outer membrane. One of the chimeric gene products, with a fusion site in a central region between the OmpC and OmpF proteins, was normally expressed but not accumulated in the outer membrane. The trimeric structures of some of the chimeric gene products appeared to be extremely unstable in a SDS solution. From these results, domains contributing to the formation of specific structures in which the OmpC and OmpF proteins differ were identified. Bacterial cells possessing the chimeric gene products were also investigated as to their sensitivity to phages that require either OmpC or OmpF as a receptor component. With the aid of the chimeric gene products, the immunogenic determinants for three anti-OmpC monoclonal antibodies were found to be localized at different portions of the OmpC polypeptide: the N-terminal, central and C-terminal portions, respectively.     

Translational control of exported proteins that results from OmpC porin overexpression.

The regulation of synthesis and export of outer membrane proteins of Escherichia coli was examined by overexpressing ompC in multicopy either from its own promoter or from an inducible promoter in an expression vector. Overexpression of OmpC protein resulted in a nearly complete inhibition of synthesis of the OmpA and LamB outer membrane proteins but had no effect on synthesis of the periplasmic maltose-binding protein. Immunoprecipitation of labeled proteins showed no evidence of accumulation of uncleaved precursor forms of OmpA or maltose-binding protein following induction of OmpC overexpression. The inhibition of OmpA and LamB was tightly coupled to OmpC overexpression and occurred very rapidly, reaching a high level within 2 min after induction. OmpC overexpression did not cause a significant decrease in expression of a LamB-LacZ hybrid protein produced from a lamB-lacZ fusion in which the fusion joint was at the second amino acid of the LamB signal sequence. There was no significant decrease in rate of synthesis of ompA mRNA as measured by filter hybridization of pulse-labeled RNA. These results indicate that the inhibition is at the level of translation. We propose that cells are able to monitor expression of exported proteins by sensing occupancy of some limiting component in the export machinery and use this to regulate translation of these proteins.     

Characterization and environmental regulation of outer membrane proteins in Xenorhabdus nematophilus.

We have examined the production of the outer membrane proteins of the primary and secondary forms of Xenorhabdus nematophilus during exponential- and stationary-phase growth at different temperatures. The most highly expressed outer membrane protein of X. nematophilus was OpnP. The amino acid composition of OpnP was very similar to those of the porin proteins OmpF and OmpC of Escherichia coli. N-terminal amino acid sequence analysis revealed that residues 1 to 27 of the mature OpnP shared 70 and 60% sequence identities with OmpC and OmpF, respectively. These results suggest that OpnP is a major porin protein in X. nematophilus. Three additional proteins, OpnA, OpnB, and OpnS, were induced during stationary-phase growth. OpnB was present at a high level in stationary-phase cells grown at 19 to 30 degrees C and was repressed in cells grown at 34 degrees C. OpnA was optimally produced at 30 degrees C and was not present in cells grown at lower and higher temperatures. The production of OpnS was not dependent on growth temperature. In contrast, another outer membrane protein, OpnT, was strongly induced as the growth temperature was elevated from 19 to 34 degrees C. In addition, we show that the stationary-phase proteins OpnA and OpnB were not produced in secondary-form cells.     

A comparative study on the genes for three porins of the Escherichia coli outer membrane. DNA sequence of the osmoregulated ompC gene

The DNA sequence of the ompC gene which encodes one of the outer membrane porins has been determined. The gene appears to encode a secretory precursor of OmpC protein consisting of a total of 367 amino acid residues with a signal peptide of 21 amino acid residues at its NH2-terminal end. The 5' end noncoding region including the promoter of the ompC gene is extremely [A-T]-rich, and the codon usage in the ompC gene is unusual as are those in genes for other abundant outer membrane proteins. The promoter sequence of the ompC gene was compared with that of the ompF gene, both of which are controlled by the osmoregulatory operon, ompB. The deduced amino acid sequence of the OmpC protein showed extensive homology with that of the other porins (OmpF and PhoE proteins). The homology in the primary amino acid sequences, as well as the coding DNA sequences among the porins, indicates that the structural genes for the three porins evolved from a common ancestral gene. Comparison of the amino acid sequences among the OmpC, OmpF, and PhoE porins will be discussed with regard to structure and function.     

The ultimate localization of an outer membrane protein of Escherichia coli K-12 is not determined by the signal sequence

To study the role of the signal sequences in the biogenesis of outer membrane proteins, we have constructed two hybrid genes: a phoE-ompF hybrid gene, which encodes the signal sequence of outer membrane PhoE protein and the structural sequence of outer membrane OmpF protein, and a bla-phoE hybrid gene which encodes the signal sequence as well as 158 amino acids of the structural sequence of the periplasmic enzyme beta-lactamase and the complete structural sequence of PhoE protein. The products of these genes are normally transported to and assembled into the outer membrane These results show: (i) that signal sequences of exported proteins are export signals which function independently of the structural sequence, and (ii) that the information which determines the ultimate location of an outer membrane protein is located in the structural sequence of this protein, and not in the signal sequence.     

Assembly-defective OmpC mutants of Escherichia coli K-12.

Novel ompC(Dex) alleles were utilized to isolate mutants defective in OmpC biogenesis. These ompC(Dex) alleles also conferred sensitivity to sodium dodecyl sulfate (SDS), which permitted the isolation of SDS-resistant and OmpC-specific phage-resistant mutants that remained Dex+. Many mutants acquired resistance against these lethal agents by lowering the OmpC level present in the outer membrane. In the majority of these mutants, a defect in the assembly (metastable to stable trimer formation) was responsible for lowering OmpC levels. The assembly defects in various mutant OmpC proteins were caused by single-amino-acid substitutions involving the G-39, G-42, G-223, G-224, Q-240, G-251, and G-282 residues of the mature protein. This assembly defect was correctable by an assembly suppressor allele, asmA3. In addition, we investigated one novel OmpC mutant in which an assembly defect was caused by a disulfide bond formation between two nonnative cysteine residues. The assembly defect was fully corrected in a genetic background in which the cell's ability to form disulfide bonds was compromised. The assembly defect of the two-cysteine OmpC protein was also mended by asmA3, whose suppressive effect was not achieved by preventing disulfide bond formation in the mutant OmpC protein.     

Lethal mutations in the structural gene of an outer membrane protein (OmpA) of Escherichia coli K12

Summary The gene ompA encodes a major outer membrane protein of Escherichia coli. Localized mutagenesis of the part of the gene corresponding to the 21-residue signal sequence and the first 45 residues of the protein resulted in alterations which caused cell lysis when expressed. DNA sequence analyses revealed that in one mutant type the last CO₂H-terminal residue of the signal sequence, alanine, was replaced by valine. The proteolytic removal of the signal peptide was much delayed and most of the unprocessed precursor protein was fractioned with the outer membrane. However, this precursor was completely soluble in sodium lauryl sarcosinate which does not solubilize the OmpA protein or fragments thereof present in the outer membrane. Synthesis of the mutant protein did not inhibit processing of the OmpA or OmpF proteins. In the other mutant type, multiple mutational alterations had occurred leading to four amino acid substitutions in the signal sequence and two affecting the first two residues of the mature protein. A reduced rate of processing could not be clearly demonstrated. Membrane fractionation suggested that small amounts of this precursor were associated with the plasma membrane but synthesis of this mutant protein also did not inhibit processing of the wild-type OmpA or OmpF proteins. Several lines of evidence left no doubt that the mature, mutant protein is stably incorporated into the outer membrane. It is suggested that the presence, in the outer membrane, of the mutant precursor protein in the former case, or of the mutant protein in the latter case perturbs the membrane architecture enough to cause cell death.     

Acquisition of Escherichia coli outer membrane proteins by Bdellovibrio sp. strain 109D

The ability of Bdellovibrio sp. to acquire the OmpF major outer membrane protein from its Escherichia coli prey was examined to determine if there were other outer membrane proteins which could or could not be acquired. Growth of bdellovibrios on mutant prey which were defective in the expression of outer membrane proteins revealed that Bdellovibrio sp. could acquire the OmpC protein in the absence of the OmpF protein. However, the OmpA, LamB, and protein 2 proteins could not be found in the Bdellovibrio Triton-insoluble outer membrane. The disappearance of the OmpF and OmpC proteins from the bdelloplast surface was measured, and it was determined that Bdellovibrio sp. exhibited a kinetic and temporal preference for the OmpF protein. Bdellovibrios could be grown on porin-deficient prey, and the progeny bdellovibrios possessed outer membranes with a protein mass deficiency.     

Host range mutants of bacteriophage Ox2 can use two different outer membrane proteins of Escherichia coli K-12 as receptors.

The Escherichia coli K-12 outer membrane protein OmpA functions as the receptor for bacteriophage Ox2. We isolated a host range mutant of this phage which was able to grow on an Ox2-resistant ompA mutant producing an altered OmpA protein. From this mutant, Ox2h5, a second-step host range mutant was recovered which formed turbid plaques on a strain completely lacking the OmpA protein. From one of these mutants, Ox2h10, a third-step host range mutant, Ox2h12, was isolated which formed clear plaques on a strain missing the OmpA protein. Ox2h10 and Ox2h12 apparently were able to use both outer membrane proteins OmpA and OmpC as receptors. Whereas there two proteins are very different with respect to primary structures and functions, the OmpC protein is very closely related to another outer membrane protein, OmpF, which was not recognized by Ox2h10 or Ox2h12. An examination of the OmpC amino acid sequence, in the regions where it differs from that of OmpF, revealed that one region shares considerable homology with a region of the OmpA protein which most likely is required for phage Ox2 receptor activity.     

The mature portion of Escherichia coli maltose-binding protein (MBP) determines the dependence of MBP on SecB for export.

The product of the secB gene is required for export of a subset of secreted proteins to the outer membrane and periplasm of Escherichia coli. Precursor maltose-binding protein (MBP) accumulates in the cytoplasm of secB-carrying mutants, but export of alkaline phosphatase is only minimally affected by secB mutations. When export of MBP-alkaline phosphatase hybrid proteins was analyzed in wild-type and secB-carrying mutant strains, the first third of mature MBP was sufficient to render export of the hybrid proteins dependent on SecB. Substitution of a signal sequence from a SecB-independent protein had no effect on SecB-dependent export. These findings show that the first third of mature MBP is capable of conferring export incompetence on an otherwise competent protein.     

Construction of a series of ompF-ompC chimeric genes by in vivo homologous recombination in Escherichia coli and characterization of the translational products.

OmpF and OmpC are major outer membrane proteins. Although they are homologous proteins, they function differently in several respects. As an approach to elucidate the submolecular structures that determine the difference, a method was developed to construct a series of ompF-ompC chimeric genes by in vivo homologous recombination between these two genes, which are adjacent on a plasmid. The genomic structures of these chimeric genes were determined by restriction endonuclease analysis and nucleotide sequence determination. In almost all cases, recombination took place between the corresponding homologous regions of the ompF and ompC genes. Many of the chimeric genes produced proteins that migrated to various positions between the OmpF and OmpC proteins on polyacrylamide gel. On the basis of the results, a domain contributing to the mobility difference the OmpF and OmpC proteins was identified. Some chimeric genes did not accumulate outer membrane proteins, despite the fact that the fusion of the ompF and ompC genes was in frame. Bacterial cells possessing the chimeric proteins were also tested as to their sensitivity to phages which require either OmpF or OmpC as a receptor component. The chimeric proteins were either of the OmpF or OmpC type with respect to receptor activity. Based on the observations, the roles of submolecular domains in the structure, function, and biogenesis of the OmpF and OmpC proteins are discussed.     

DNA topological change in the hyperthermophilic archaeon Pyrococcus abyssi exposed to low temperature

Abstract Mice were immunized with resin-bound peptides whose sequences have been proposed to be part of exposed loops in Salmonella typhi outer membrane protein OmpC. To screen hybridomas for monoclonal antibodies against those epitopes, we designed fusion proteins where the candidate peptide sequence was attached to the amino end of cholera toxin B-subunit (CTB). The constructed fusion proteins allowed the efficient selection of positive clones by GM1-ELISA. Selected antibodies recognized purified OmpC and whole Salmonella bacteria. This suggests a native structure of our genetically attached peptides in agreement with immunological properties reported for previous CTB recombinant fusion proteins. In a more general context, CTB hybrids could be used to screen for antibodies towards immunogenic epitopes in other systems. This might turn out to be particularly useful when producing antibodies against peptide sequences in microorganisms whose handling is difficult or that pose inherent health risks.     

Insertion of a signal peptide-derived hydrophobic segment into the mature domain of OmpC, an outer membrane protein, does not interfere with the export of the following polypeptide chain across the cytoplasmic membrane of E. coli

The effects of a hydrophobic peptide segment inserted into the amino-terminal region of the mature domain of OmpC, an outer membrane protein, on its translocation across the cytoplasmic membrane was studied. Both the intact OmpC and central domain-deleted OmpC were examined. The hydrophobic segment was derived from the signal peptide of OmpF. Secretory translocation across the cytoplasmic membrane was examined by means of proteinase K treatment. Four monoclonal antibodies that recognize different regions of OmpC were used to characterize proteinase K-resistant fragments. Insertion of the hydrophobic segment did not appreciably prevent the translocation of these proteins across the cytoplasmic membrane, larger parts of them being found as mature forms, which were mostly localized outside the cytoplasmic membrane. Circumstantial evidence supports the view, on the other hand, that the inserted hydrophobic domain was retained in the cytoplasmic membrane. It is concluded, therefore, that the hydrophobic segment, although it is not exported across the cytoplasmic membrane, does not prevent the secretion of the following polypeptide chain. The secretion was dependent on the amino-terminal signal peptide. Insertion of positive charges immediately after the hydrophobic segment resulted in suppression of the translocation. Based on these results possible mechanisms by which the secretion of the polypeptide chain after the hydrophobic segment are discussed.     

An inner membrane protein N-terminal signal sequence is able to promote efficient localisation of an outer membrane protein in Escherichia coli

To test the importance of N-terminal pre-sequences in translocation of different classes of membrane proteins, we exchanged the normal signal sequence of an Escherichia coli outer membrane protein, OmpF, for the pre-sequence of the inner membrane protein, DacA. The DacA-OmpF hybrid was efficiently assembled into the outer membrane in a functionally active form. Thus the pre-sequence of DacA, despite its relatively low hydrophobicity compared with that of OmpF, contains all the essential information necessary to initiate the translocation of OmpF to the outer membrane. Since processing of DacA was also shown to be dependent upon SecA we conclude that the initiation of translocation of this inner membrane polypeptide across the envelope occurs by the same mechanism as outer membrane and periplasmic proteins. The N-terminal 11 amino acids of mature OmpF, which in the hybrid are replaced by the N-terminal nine amino acids of DacA, carry no essential assembly signals since the hybrid protein is apparently assembled with equal efficiency to OmpF.