Attachment of Pasteuria penetrans Endospores to the Surface of Meloidogyne javanica Second-stage Juveniles

Pasteuria penetrans spore adhesion to Meloidogyne javanica second-stage juveniles (J2) was examined following several different pretreatments of the latter. The detergents sodium dodecyl sulfate and Triton X-100, the carbohydrates fucose and α-methyl-D-mannoside, and the lectins concanavalin A and wheat germ agglutinin reduced spore attachment. Spores exposed to M. javanica surface coat (SC) extract exhibited decreased adherence to the J2 surface. Second-stage juveniles that had been treated with antibodies recognizing a 250-kDa antigen of J2 SC extract had fewer spores attached to their surfaces, as compared to nontreated J2, except in the head region. This inhibition pattern was similar to that of antibody-labelling on M. javanica J2 as observed by electron microscopy. It is suggested that several SC components, such as carbohydrate residues, carbohydrate-recognition domains, and a 250-kDa antigen, are involved in P. penetrans spore attachment to the surface of M. javanica.     

Deposition of Bacillus subtilis spores using an airbrush-spray or spots to study surface decontamination by pulsed light

Microbial contamination on surfaces of food processing equipment is a major concern in industries. A new method to inoculate a single-cell layer (monolayer) of microorganisms onto polystyrene was developed, using a deposition with an airbrush. A homogeneous dispersion of Bacillus subtilis DSM 402 spores sprayed on the surface was observed using both plate count and scanning electron microscopy. No clusters were found, even with high spore concentrations (10⁷ spores/inoculated surface). A monolayer of microorganisms was also obtained after deposition of 10 μL droplets containing 3 × 10⁴ spores/spot on polystyrene disks, but not with a higher spore concentration. Pulsed light (PL) applied to monolayers of B. subtilis spores allowed log reductions higher than 6. As a consequence of clusters formation in spots of 10 μL containing more than 3 × 10⁵ spores, log reductions obtained by PL were significantly lower. The comparative advantages of spot and spray depositions were discussed.     

Exposure of Escherichia coli ATCC 12806 to Sublethal Concentrations of Food-Grade Biocides Influences Its Ability To Form Biofilm,Resistance to Antimicrobials,and Ultrastructure

Escherichia coli ATCC 12806 was exposed to increasing subinhibitory concentrations of three biocides widely used in food industry facilities: trisodium phosphate (TSP), sodium nitrite (SNI), and sodium hypochlorite (SHY). The cultures exhibited an acquired tolerance to biocides (especially to SNI and SHY) after exposure to such compounds. E. coli produced biofilms (as observed by confocal laser scanning microscopy) on polystyrene microtiter plates. Previous adaptation to SNI or SHY enhanced the formation of biofilms (with an increase in biovolume and surface coverage) both in the absence and in the presence (MIC/2) of such compounds. TSP reduced the ability of E. coli to produce biofilms. The concentration of suspended cells in the culture broth in contact with the polystyrene surfaces did not influence the biofilm structure. The increase in cell surface hydrophobicity (assessed by a test of microbial adhesion to solvents) after contact with SNI or SHY appeared to be associated with a strong capacity to form biofilms. Cultures exposed to biocides displayed a stable reduced susceptibility to a range of antibiotics (mainly aminoglycosides, cephalosporins, and quinolones) compared with cultures that were not exposed. SNI caused the greatest increase in resistances (14 antibiotics [48.3% of the total tested]) compared with TSP (1 antibiotic [3.4%]) and SHY (3 antibiotics [10.3%]). Adaptation to SHY involved changes in cell morphology (as observed by scanning electron microscopy) and ultrastructure (as observed by transmission electron microscopy) which allowed this bacterium to persist in the presence of severe SHY challenges. The findings of the present study suggest that the use of biocides at subinhibitory concentrations could represent a public health risk.     

Novel Fungitoxicity Assays for Inhibition of Germination-Associated Adhesion of Botrytis cinerea and Puccinia recondita Spores

Botrytis cinerea and Puccinia recondita spores adhere strongly to polystyrene microtiter plates coincident with germination. We developed assays for inhibition of spore adhesion in 96-well microtiter plates by using sulforhodamine B staining to quantify the adherent spores. In both organisms, fungicides that inhibited germination strongly inhibited spore adhesion, with 50% effective concentrations (EC₅₀s) comparable to those for inhibition of germination. In contrast, fungicides that acted after germination in B. cinerea inhibited spore adhesion to microtiter plates only at concentrations much higher than their EC₅₀s for inhibition of mycelial growth. Similarly, in P. recondita the ergosterol biosynthesis inhibitors myclobutanil and fenbuconazole acted after germination and did not inhibit spore adhesion. The assays provide a rapid, high-throughput alternative to traditional spore germination assays and may be applicable to other fungi.     

Localized, Positive Charge Mediates Adhesion of Rhodosporidium toruloides to Barley Leaves and Polystyrene

The physicochemical forces that mediate attachment of yeasts to the phylloplane are unknown. Cell surface charge and hydrophobicity and adhesion to polystyrene, glass, and barley were assessed for wild-type Rhodosporidium toruloides and attachment-minus (Att⁻) mutants. Cells were grown under conditions promoting (excess carbon) or not promoting (excess nitrogen) capsule production. Hydrophobicity was measured by adhesion to xylenes, and surface charge characteristics were assessed by attachment to either DEAE (positive)- or carboxymethyl (CM) (negative)-Sephadex ion-exchange beads. Hydrophobicity and adhesiveness of nonencapsulated, wild-type R. toruloides decreased from mid-log to late stationary phase. Encapsulated wild-type R. toruloides cells were more hydrophobic and more adhesive than nonencapsulated cells. However, two encapsulated Att⁻ mutants were more hydrophobic than the wild type and levels of adhesion of R. toruloides were similar on polystyrene and less hydrophobic glass surfaces. Adhesion of wild-type yeast to barley and polystyrene was correlated with attachment to CM-Sephadex beads, indicating a positive cell surface charge. Sixteen Att⁻ mutants did not exhibit a positive cell surface charge, and wild-type yeast cells that did not attach to CM-Sephadex did not adhere to either polystyrene or barley. Wild-type R. toruloides attached to CM-Sephadex beads by the poles of the cells, indicating a localization of positive charge which was also visualized with India ink. We conclude that localized, positive charge, and not hydrophobic interactions, mediates attachment of R. toruloides to barley leaves.     

Variability of the Influence of Physicochemical Factors Affecting Bacterial Adhesion to Polystyrene Substrata

The role of electrostatic and hydrophobic interactions and solid and liquid surface tensions in the adhesion of four bacterial species (Pseudomonas fluorescens, Enterobacter cloacae, Chromobacterium sp., and Flexibacter sp.) to hydrophobic polystyrene petri dishes and to more hydrophilic polystyrene tissue culture dishes was investigated. The effect of electrostatic interactions was investigated by determining the effects of different electrolyte solutions on attachment to and of different electrolyte and pH solutions on detachment from the polystyrene substrate. The significance of solid and liquid surface tensions and hydrophobic interactions was investigated by measuring the effects of different surfactants (including a concentration series of dimethyl sulfoxide) on adhesion and detachment. Adhesion varied with bacterial species, substratum, and electrolyte type and concentration, with no apparent correlation between adhesion and electrolyte valence or concentration. The influence of different pH and detergent solutions on bacterial detachment also varied with species, substratum, pH, and detergent type; however, the greatest degree of detachment of all strains from the surfaces was produced by detergent treatment. The results suggest that adhesion cannot be attributed to any one type of adhesive interaction. There was some evidence for both electrostatic and hydrophobic interactions, but neither interaction could wholly account for the data.     

Adhesion of conidia of the fungus Dilophospora alopecuri to the cuticle of the nematode Anguina agrostis,the vector in annual ryegrass toxicity

The adhesion of conidia of the fungus Dilophospora alopecuri to the surface of the second stage dauer larva (DL₂) of the nematode Anguina agrostis (syn. A. funesta) was examined using both light and electron optics. The process of attachment does not lead to any apparent damage to the epicuticle of the nematode. Photographs of sections cut tangentially through the setulose appendages of the conidia show that a mucilagenous fibrillar material appears to be exuded from the highly convoluted surface of these appendages. This material adheres to the surface of the nematode cuticle and is deposited in the transverse annulations. The adhesion of these spores to DL₂ of A. agrostis was examined in 4822 nematodes from four galls. The mean percentage of DL₂ with spores adhering was 64% and ranged from 43 to 85%. This adhesion was compared with that of Corynebacterium rathayi from bacterial galls and was found to coincide. Thus, bacteria adhere to nematodes with D. alopecuri conidia attached and these conidia adhere to nematodes with C rathayi attached. Furthermore, DL₂ that are free from conidial adhesion appear to be free from bacterial adhesion and, in most instances, DL₂ that remain from from bacterial adhesion remain free from conidial adhesion. These observations draw attention to the potential of D. alopecuri as an agent for the biological control of annual ryegrass toxicity. Conidial adhesion to A. agrostis differs from bacterial adhesion to this nematode in that no visible damage to the cuticle takes place. The concept that adhesion of microorganisms to nematodes occurs in two phases, one involving site recognition and the other, if it occurs, involving physiological interaction and morphological change is discussed.     

Attachment of the Yeast Rhodosporidium toruloides Is Mediated by Adhesives Localized at Sites of Bud Cell Development

The basidiomycetous yeast Rhodosporidium toruloides (anamorph, Rhodotorula glutinis) is a common phylloplane epiphyte with biocontrol potential. To understand how R. toruloides adheres to plant surfaces, we obtained nonadherent fungal mutants after chemical mutagenesis with methane-sulfonic acid ethyl ester. Sixteen attachment-minus (Att⁻) mutants were identified by three methods: (i) screening capsule-minus colonies for loss of adhesive ability; (ii) enrichment for mutants unable to attach to polystyrene; and (iii) selection for reduced fluorescence of fluorescein isothiocyanate-concanavalin A (Con A)-stained cells by fluorescence-activated cell sorting. None of the 16 mutants attached to polystyrene or barley leaves. The lectin Con A eliminated adhesion in all of the wild-type isolates tested. Hapten competition assays indicated that Con A bound to mannose residues on the cell surface. Adhesion of wild-type R. toruloides was transient; nonadhesive cells subsequently became adhesive, with bud development. All Att⁻ mutants and nonattaching wild-type cells lacked polar regions that stained intensely with fluorescein isothiocyanate-Con A and India ink. Lectin, enzyme, and chemical treatments showed that the polar regions consisted of alkali-soluble materials, including mannose residues. Tunicamycin treatment reduced wild-type adhesion, indicating that the mannose residues could be associated with glycoproteins. We concluded that compounds, including mannose residues, that are localized at sites of bud development mediate adhesion of R. toruloides to both polystyrene and barley leaf surfaces.     

Effect of Cetylpyridinium Chloride on Microbial Adhesion to Hexadecane and Polystyrene

Microbial adhesion at the oil-water interface is a subject of both basic interest (e.g., as a technique for the measurement of hydrophobicity) and applied interest (e.g., for use in two-phase oil-water mouthwashes for the desorption of oral microorganisms). In general, surfactants inhibit microbial adhesion to oils and other hydrophobic surfaces. In the present study, we demonstrated that the cationic surfactant cetylpyridinium chloride (CPC) significantly enhanced microbial adhesion to hexadecane and various oils, as well as to the solid hydrophobic surface polystyrene. CPC increased adhesion to hexadecane of Escherichia coli, Candida albicans and Acinetobacter calcoaceticus MR-481 and of expectorated oral bacteria from near 0% to over 90%. The CPC concentration required for optimal enhancement of adhesion was a function of the initial cell density. This phenomenon was inhibited by high salt concentrations and, in the case of E. coli, by a low pH. CPC-pretreated cells were able to bind to hexadecane, but CPC-pretreated hexadecane was unable to bind untreated cells. Another cationic, surface-active antimicrobial agent, chlorhexidine gluconate, was similarly able to promote microbial adhesion to hexadecane. The results suggest that (i) CPC enhances microbial adhesion to hexadecane by binding via electrostatic interactions at the cell surface, thus diminishing surface charge and increasing cell surface hydrophobicity, and (ii) this phenomenon may have applications in oral formulations and in the use of hydrocarbon droplets as a support for cell immobilization.     

Thermodynamic Analysis of Growth Temperature Dependence in the Adhesion of Candida parapsilosis to Polystyrene

The purpose of this work was to study the adhesion to polystyrene of two Candida parapsilosis strains, grown at 22 and 37°C, in terms of hydrophobicity, surface charge, and interaction free energy. Growth temperature changed the surface properties of microorganisms, yielding a good correlation between thermodynamic predictions and adhesion behavior.     

Stenotrophomonas maltophilia flagellin is involved in bacterial adhesion and biofilm formation

Stenotrophomonas maltophilia is an emerging drug-resistant pathogen and an important opportunistic pathogen. S. maltophilia flagellin was purified using serial ultracentrifugation. The purity of flagellin was checked by SDS-PAGE. The antibodies were raised in rabbits. The presence of anti-flagellin and the titer of flagellin were detected by immunoblotting and bacterial agglutination techniques. Two methods (viable bacterial count and spectrophotometric methods) were applied to evaluate bacterial adhesion and biofilm formation. Pretreatment of S. maltophilia with dilutions of anti-flagellin (from 1/40 to 1/640) reduced the ability of S. maltophilia to adhere and form biofilms on polystyrene (P < 0.05). In the present study, the inhibition of bacterial adhesion to polystyrene was dose-dependent. The positive correlation was observed between the antibody dilutions and bacterial adhesion (CFU/mL) (r > +0.5, P < 0.05), while, the negative correlation (r < ?0.5, P < 0.05) was observed between the percentage of adhesion inhibition and anti-flagellin dilutions. The current study proved the direct role of S. maltophilia flagellin in bacterial adhesion to and biofilm formation on polystyrene.     

Adhesion of Macroconidia to the Plant Surface and Virulence of Nectria haematococca

To study spore attachment of the cucurbit pathogen Nectria haematococca (anamorph, Fusarium solani f. sp. cucurbitae), mutants with adhesion-deficient macroconidia were isolated. The adhesion-deficient mutants were selected after treatment with N-methyl-N′ -nitro-N-nitrosoguanidine followed by repeated enrichment for macroconidia which did not attach to polystyrene. Two independently derived mutants produced macroconidia with an approximately 50% reduction in attachment to polystyrene and to zucchini fruits. When macroconidia were inoculated into wounded zucchini fruits, the adhesion-deficient mutants were as virulent as the wild-type strain. However, in disease assays in which macroconidia were deposited onto the surface of unwounded zucchini, the mutants were less virulent than the wild type. Thus, adhesion of N. haematococca macroconidia to its host surface appears to be a virulence factor.     

Cellular immune responses of spruce budworm larvae to Entomophthora egressa protoplasts and other test particles

The protoplast stage of two isolates of Entomophthora egressa developed normally and eventually produced conidiophores when injected into larvae of the spruce budworm, Choristoneura fumiferana. The spruce budworm hemocytes never made long-term contact with the protoplasts either in vivo or in vitro. The protoplasts made active, short-term contact with spruce budworm granulocytes both in vivo and in vitro. Total larval hemocyte counts (THC) initially declined when larvae were injected with protoplasts, growth medium (MGM), or Escherichia coli. The recovery rate to THC control levels was similar for MGM and protoplasts and supports the concept of nonrecognition of protoplasts by the hemocytes. The granulocytes were important in both nodulation and phagocytosis of E. coli and Bacillus cereus, whereas the plasmatocytes were important in phagocytosis. In in vitro studies, spruce budworm granulocytes did not adhere to rod-shaped hyphal bodies, spherical hyphal bodies, or germinating spherical hyphal bodies of E. egressa, whereas the granulocytes readily encapsulated the hyphae. There was no evidence for the production by the protoplasts of metabolites which might interfere with hemocyte adhesion. When protoplasts contacted Tenebrio molitor granulocytes, the protoplasts reacted by increasing the number of protoplasmic extensions and by granule discharge. The process of granule discharge may be an active protoplast defense mechanism. The sporangiospores of Absidia repens and Rhizopus nigricans adhered to spruce budworm granulocytes; however, the number of A. repens spores per granulocyte and the level of granulocytes with spores decreased in the presence of phenylthiourea. The adhesion of A. repens spores to granulocytes was enhanced by N-acetylglucosamine, whereas glucosamine, sucrose, fucose, fructose, arabinose, and galactose either had no effect on or reduced spore adhesion. Thus, the chitin (or its subunits) in the hyphal wall may initiate the granulocyte response.     

Identification of Tn10 insertions in the rfaG, rfaP, and galU genes involved in lipopolysaccharide core biosynthesis that affect Escherichia coli adhesion

Escherichia coli was used as a model to study initial adhesion and early biofilm development to abiotic surface. Tn10 insertion mutants of Escherichia coli K-12 W3110 were selected for altered abilities to adhere to a polystyrene surface. Seven insertion mutants that showed a decrease in adhesion harbored insertions in genes involved in lipopolysaccharide (LPS) core biosynthesis. Two insertions were located in the rfaG gene, two in the rfaP gene, and three in the galU gene. These adhesion mutants were found to exhibit a deep-rough phenotype and to be reduced, at different levels, in type 1 fimbriae production and motility. The loss of adhesion exhibited by these mutants was associated with either the affected type 1 fimbriae production and/or the dysfunctional motility. Apart from the pleiotropic effect of the mutations affecting LPS on type 1 fimbriae and flagella biosynthesis, no evidence for an involvement of the LPS itself in adhesion to polystyrene surface could be observed. Received: 1 December 1998 / Accepted: 3 April 1999     

Adhesion of the genome-sequenced <Emphasis Type="Italic">Lactococcus lactis</Emphasis> subsp. <Emphasis Type="Italic">cremoris</Emphasis> IBB477 strain is mediated by specific molecular determinants

Understanding the nature of mucus-microbe interactions will provide important information that can help to elucidate the mechanisms underlying probiotic adhesion. This study focused on the adhesive properties of the Lactococcus lactis subsp. cremoris IBB477 strain, previously shown to persist in the gastrointestinal tract of germ-free rats. The shear flow-induced detachment of L. lactis cells was investigated under laminar flow conditions. Such a dynamic approach demonstrated increased adhesion to bare and mucin-coated polystyrene for IBB477, compared to that observed for the MG1820 control strain. To identify potential genetic determinants giving adhesive properties to IBB477, the improved high-quality draft genome sequence comprising chromosome and five plasmids was obtained and analysed. The number of putative adhesion proteins was determined on the basis of surface/extracellular localisation and/or the presence of adhesion domains. To identify proteins essential for the IBB477 specific adhesion property, nine deletion mutants in chromosomal genes have been constructed and analysed using adhesion tests on bare polystyrene as well as mucin-, fibronectin- or collagen IV-coated polystyrene plates in comparison to the wild-type strain. These experiments demonstrated that gene AJ89_07570 encoding a protein containing DUF285, MucBP and four Big_3 domains is involved in adhesion to bare and mucin-coated polystyrene. To summarise, in the present work, we characterised the adhesion of IBB477 under laminar flow conditions; identified the putative adherence factors present in IBB477, which is the first L. lactis strain exhibiting adhesive and mucoadhesive properties to be sequenced and demonstrated that one of the proteins containing adhesion domains contributes to adhesion.     

Recovery of Spores from Thermophilic Dairy Bacilli and Effects of Their Surface Characteristics on Attachment to Different Surfaces

Spores from four Geobacillus spp. were isolated from a milk powder manufacturing line in New Zealand. Liquid sporulation media produced spore yields of ~10⁷ spores ml⁻¹; spores were purified using a two-phase system created with polyethylene glycol 4000 and 3 M phosphate buffer. The zeta potentials of the spores from the four isolates ranged from −10 to −20 mV at neutral pH, with an isoelectric point between pH 3 and 4. Through contact angle measurements, spores were found to be hydrophilic and had relative hydrophobicity values of 10 to 40%, as measured by the microbial adhesion to hexadecane assay. The most hydrophilic spore isolate with the smallest negative charge attached in the highest numbers to Thermanox and stainless steel (1 × 10⁴ spores cm⁻²), with fewer spores attaching to glass (3 × 10³ spores cm⁻²). However, spores produced by the other three strains attached in similar numbers (P > 0.05) to all substrata (~1 × 10³ spores cm⁻²), indicating that there was no simple relationship between individual physicochemical interactions and spore adherence. Therefore, surface modifications which limit the attachment of one strain may not be effective for all stains, and control regimens need to be devised with reference to the characteristics of the particular strains of concern.     

Promotive effect of chrysanthemic acids on adventitious root formation in some plants

Adventitious root formation in excised cucumber (Cucumis sativus L.) cotyledons was significantly promoted by (±)-cis-chrysanthemic acid at 0.006–1.8 mM. The effect of (±)-cis-chrysanthemic acid on indole-3-acetic acid (IAA)-induced rooting was additive. Rooting in excised cucumber cotyledons was significantly promoted by several isomers of chrysanthemic acid and sodium (±)-cis-chrysanthemate at 0.18 mM. Rooting in mung bean (Phaseolus radiatus L.) hypocotyls was also stimulated by the sodium salt at 0.06–0.6 mM. Rooting of kidney bean (Phaseolus vulgaris L.) hypocotyls was also clearly enhanced by sodium (±)-cis-chrysanthemate at 0.18–6 mM.     

Thermodynamic aspects of plant cell adhesion to polymer surfaces

Summary A thermodynamic model of particle adhesion from a suspension onto a solid surface is used to predict the extent of adhesion of suspension-cultured Catharanthus roseus cells to the following polymer substrates: fluorinated ethylene-propylene (FEP), polystyrene (PS), polyethylene terephthalate (PET), sulphonated polystyrene (SPS), and glass. According to this model, the extent of adhesion is determined by the surface tensions of the plant cells, the polymer substrates, and the suspending liquid medium. Experimentally, adhesion of the washed plant cells was found to decrease with increasing substrate surface tension, following the sequence FEP>PS>PET>SPS>glass, when the surface tension of the liquid was greater than that of the plant cells, in agreement with the model. However, adhesion increased with increasing substrate surface tension when the liquid surface tension was lower than the cellular surface tension, also in agreement with the model. When the liquid and cellular tensions were equal the extent of adhesion was independent of the substrate surface tension. This also agrees with model predictions and leads to a value for the surface tension of C. roseus cells of approximately 54 ergs/cm² which is in agreement with a value obtained from contact angle measurements on layers of cells and sedimentation volume analysis. The cellular surface tension determined by the sedimentation volume method showed a biphasic alteration during growth cycles of C. roseus cell cultures. These variations (between 55 and 58 ergs/cm²) agree with the pattern of adhesion previously described.     

Disinfection of Bacillus subtilis spore-contaminated surface materials with a sodium hypochlorite and a hydrogen peroxide-based sanitizer

Aims: To evaluate a sodium hypochlorite and hydrogen peroxide solution (Ox‐B7) as a potential decontaminant of Bacillus subtilis spore‐contaminated surface materials (porous and nonporous). Methods and Results: Test materials were contaminated with B. subtilis spores to a final concentration in the range of 5·7–6·6 log CFU cm^?2. Ox‐B7 reduced spore counts by 99·999% (5 log) for both porous and nonporous surfaces within a 5‐min contact. Treatment with equivalent concentrations of only sodium hypochlorite reduced spore counts by 99% (2 log) on porous materials and by 99·99% (4 log) on nonporous materials. Hydrogen peroxide treatments reduced spores by less than 90% (<1 log) on both porous and nonporous materials when compared with untreated samples. Conclusions: A combination of sodium hypochlorite and hydrogen peroxide (Ox‐B7) effectively killed B. subtilis spores on both porous and nonporous surface materials. Significance and Impact of the Study: The combination of sodium hypochlorite and hydrogen peroxide can be used as an alternative disinfectant of spore‐contaminated surface materials, as it is more effective than when hydrogen peroxide or sodium hypochlorite are used separately.     

Selective Adhesion of Thiobacillus ferrooxidans to Pyrite

Bacterial adhesion to mineral surfaces plays an important role not only in bacterial survival in natural ecosystems, but also in mining industry applications. Selective adhesion was investigated with Thiobacillus ferrooxidans by using four minerals, pyrite, quartz, chalcopyrite, and galena. Escherichia coli was used as a control bacterium. Contact angles were used as indicators of hydrophobicity, which was an important factor in the interaction between minerals and bacteria. The contact angle of E. coli in a 0.5% sodium chloride solution was 31°, and the contact angle of T. ferrooxidans in a pH 2.0 sulfuric acid solution was 23°. E. coli tended to adhere to more hydrophobic minerals by hydrophobic interaction, while T. ferrooxidans selectively adhered to iron-containing minerals, such as pyrite and chalcopyrite. Ferrous ion inhibited the selective adhesion of T. ferrooxidans to pyrite competitively, while ferric ion scarcely inhibited such adhesion. When selective adhesion was quenched by ferrous ion completely, adhesion of T. ferrooxidans was controlled by hydrophilic interactions. Adhesion of E. coli to pyrite exhibited a liner relationship on langmuir isotherm plots, but adhesion of T. ferrooxidans did not. T. ferrooxidans recognized the reduced iron in minerals and selectively adhered to pyrite and chalcopyrite by a strong interaction other than the physical interaction.