Influence of killer strains of Saccharomyces cerevisiae on wine fermentation

The effect of killer strains of Saccharomyces cerevisiae on the growth of sensitive strains during must fermentation was studied by using a new method to monitor yeast populations. The capability of killer yeast strains to eliminate sensitive strains depends on the initial proportion of killer yeasts, the susceptibility of sensitive strains, and the treatment of the must. In sterile filtered must, an initial proportion of 2-6% of killer yeasts was responsible for protracted fermentation and suppression of isogenic sensitive strains. A more variable initial proportion was needed to get the same effect with non-isogenic strains. The suspended solids that remain in the must after cold-settling decreased killer toxin effect. The addition of bentonite to the must avoided protracted fermentation and the suppression of sensitive strains; however, the addition of yeast dietary nutrients with yeast cell walls did not, although it decreased fermentation lag.     

Metabolic diversity of Saccharomyces cerevisiae strains from spontaneously fermented grape musts

One hundred and fifteen Saccharomyces cerevisiae strains from Aglianico del Vulture, a red wine produced in Southern Italy, were characterized for the production of some secondary compounds involved in the aroma and taste of alcoholic beverages. The strains exhibited a uniform behaviour in the production levels of n-propanol, active amyl alcohol and ethyl acetate, whereas isobutanol, isoamyl alcohol and acetaldehyde were formed with a wide variability. Only five strains produced wines close to the reference Aglianico del Vulture wine for the traits considered. Of these, two strains were selected, underwent to tetrad analysis and the single spore cultures were tested in grape must fermentation. The progeny of one strain showed a significant metabolic variability, confirming the necessity to test starter cultures for the segregation of traits of technological interest. Our findings suggest the selection of specific strains for specific fermentations as a function of the vine variety characteristics in order to take the major advantage from the combination grape must/S. cerevisiae strain.     

Studies on the kinetic parameters for alcoholic fermentation by flocculent Saccharomyces cerevisiae strains and non-hydrogen sulfide-producing strains

Summary The growing demand for high quality products and the immense export potential that cacha?a represents, demonstrated especially during the past few years, have clearly indicated the necessity of establishing well-defined standards of quality, as well as effective means of controlling the process of production of this beverage. The objective of this study was the selection of S. cerevisiae yeast strains and the investigation of their influence on the kinetic parameters of fermentation. Ninety strains of S. cerevisiae isolated from distilleries of the state of Minas Gerais were evaluated with respect to the following parameters: flocculation capacity, production of H₂S and kinetic parameters of fermentation. The UFMGA 905 strain was used as a reference because it presented desirable characteristics for the production of cacha?a. Five strains presented high specific sedimentation velocities (SSV), indicating a high flocculation capacity, and two did not produce H₂S. The strains presented significant statistical differences for fermentation parameters: yield of ethanol; efficiency of substrate conversion to ethanol; ratio of substrate conversion to ethanol (Y _p/s), to cells (Y _x/s), to organic acids (Y _ac/s), and to glycerol (Y _g/s); and productivity. In general, the strains presented a good fermentative potential, with ethanol yields varying from 74.7 to 82.1% and an efficiency of 76.1–84.4%. All strains presented high productivities (4.6–6.6 g l⁻¹ h⁻¹), indicating that this parameter can be used in the selection of strains for the production of cacha?a.     

Biosorption of long lived radionuclides using immobilized cells of Saccharomyces cerevisiae

The efficacy of immobilized Saccharomyces cerevisiae (biomatrix) for the sorption of different metal ions and its potential applications in nuclear waste treatment were investigated. The sorption of radionuclides such as ²³³U, ²⁴¹Am, ¹⁴⁴Ce, ¹³⁷Cs and ⁹⁰Sr was studied under different experimental conditions. More than 95% sorption of UO₂ ²⁺, Pu⁴⁺, Am³⁺ and Ce³⁺ could be obtained in the pH range 1 to 2 of the aqueous solutions. However the sorption of Cs⁺ and Sr²⁺ were negligible under the similar experimental conditions. The infrared spectra and scanning electron microscopic images of the control and uranium-bearing biomatrix were studied to understand the chemistry of metal uptake by this biomatrix.     

Development of novel carrier using natural zeolite and continuous ethanol fermentation with immobilized Saccharomyces cerevisiae in a bioreactor

A natural zeolite, easily vitrified and blown at 1300 °C with a high porosity and diam. of 5–100 m, was used to immobilize Saccharomyces cerevisiae at 3.6 × 10⁸ cells ml^–1 carrier. When the abilities of natural zeolite carrier were compared with glass beads, the capacity for immobilization and alcohol fermentation activity were, respectively, 2-fold higher and 1.2-fold higher than that of glass beads. Continuous alcohol fermentation was stable for over 21 d without breakage of the carrier.     

Contribution of winery-resident Saccharomyces cerevisiae strains to spontaneous grape must fermentation

The origin of the Saccharomyces cerevisiae strains that are responsible for spontaneous grape must fermentation was investigated in a long-established industrial winery by means of two different approaches. First, seven selected components of the analytical profiles of the wines produced by 58 strains of S. cerevisiae isolated from different sites and phases of the production cycle of a Grechetto wine were subjected to Principal Components Analysis. Secondly, the same S. cerevisiae isolates underwent PCR fingerprinting by means of delta primers. The results obtained by both methods demonstrate unequivocally that under real vinification conditions, the S. cerevisiae strains colonising the winery surfaces are the ones that carry out the natural must fermentation.     

Saccharomyces cerevisiae wine strains differing in copper resistance exhibit different capability to reduce copper content in wine

Two wine strains of Saccharomyces cerevisiae, characterized by a different degree of copper resistance, were tested in grape must fermentation in the presence of different copper concentrations. The sensitive strain SN9 was strongly affected by copper concentration (32 ppm, (32 mg/l)), whereas the resistant strain SN41 exhibited a good growth activity in presence of 32 ppm of copper and only a reduced activity in presence of 320 ppm. The different strain fermentation performance in response to the copper addition corresponded to a different capability to accumulate copper inside the cells. Both strains exhibited the capacity to reduce the copper content in the final product, eventhough a significantly greater reducing activity was exerted by the resistant strain SN41, which was able to reduce by 90% the copper concentration in the final product and to accumulate the metal in great concentrations in the cells. As high concentrations of copper can be responsible for wine alterations, the selection of S. cerevisiae strains possessing high copper resistance and the ability to reduce the copper content of wine has a great technological interest, in particular for the fermentation of biological products. From the results obtained, the technique proposed is not only suitable for the assay of copper residues in must, wine and yeast cells, but it also offers the advantage of easy sample preparation and low detection limit in the ppb (g/l) range.     

Improvement on laboratory fermentation equipment to study Saccharomyces cerevisiae metabolism

Beside being an ordinary fermenter, the present equipment was conceived to sample the medium, to store the samples and to record photographs of the yeasts. Ten sensors were used to measure gas exchanges. During the growth of ScM1 (a Saccharomyces cerevisiae strain) on glucose, we could observe two different linear decreases of CO₂ production rates (18.17±0.12 mmol CO₂ h^–2 (g biomass)^–1 and 8.67±0.12 mmol CO₂ h^–2 (g biomass)^–1), together with a sudden variation of slope during the respiro-fermentative phase. Nomenclature F_in InletairFlowl h ^–1 F_out OutletgasFlowl h ^–1 _in Inletairtemperature°C_out Outletgastemperature°CP _atm AtmosphericPressuremmHgP _in InletairOverPressuremmHgP _out OutletgasOverPressuremmHgDODissolvedO ₂ mg l^–1 pO₂ PartialPressureO ₂ in Outlet gas % (v/v) pCO₂ PartialPressureCO ₂ in Outlet gas % (v/v) Int(t) Whole number of hours     

High alcohol production by repeated batch fermentation using an immobilized osmotolerant Saccharomyces cerevisiae

A repeated batch fermentation system was used to produce ethanol using an osmotolerant Saccharomyces cerevisiae (VS₃) immobilized in calcium alginate beads. For comparison free cells were also used to produce ethanol by repeated batch fermentation. Fermentation was carried for six cycles with 125, 250 or 500 beads using 150, 200 or 250 g glucose L⁻¹ at 30°C. The maximum amount of ethanol produced by immobilized VS₃ using 150 g L⁻¹ glucose was only 44 g L⁻¹ after 48 h, while the amount of ethanol produced by free cells in the first cycle was 72 g L⁻¹. However in subsequent fed batch cultures more ethanol was produced by immobilized cells compared to free cells. The amount of ethanol produced by free cells decreased from 72 g L⁻¹ to 25 g L⁻¹ after the fourth cycle, while that of immobilized cells increased from 44 to 72 g L⁻¹. The maximum amount of ethanol produced by immobilized VS₃ cells using 150, 200 and 250 g glucose L⁻¹ was 72.5, 93 and 87 g ethanol L⁻¹ at 30°C. Journal of Industrial Microbiology & Biotechnology (2000) 24, 222–226. Received 16 September 1999/ Accepted in revised form 22 December 1999     

Discrepancy in glucose and fructose utilisation during fermentation by Saccharomyces cerevisiae wine yeast strains

While unfermented grape must contains approximately equal amounts of the two hexoses glucose and fructose, wine producers worldwide often have to contend with high residual fructose levels (>2 gl(-1)) that may account for undesirable sweetness in finished dry wine. Here, we investigate the fermentation kinetics of glucose and fructose and the influence of certain environmental parameters on hexose utilisation by wine yeast. Seventeen Saccharomyces cerevisiae strains, including commercial wine yeast strains, were evaluated in laboratory-scale wine fermentations using natural Colombard grape must that contained similar amounts of glucose and fructose (approximately 110 gl(-1) each). All strains showed preference for glucose, but to varying degrees. The discrepancy between glucose and fructose utilisation increased during the course of fermentation in a strain-dependent manner. We ranked the S. cerevisiae strains according to their rate of increase in GF discrepancy and we showed that this rate of increase is not correlated with the fermentation capacity of the strains. We also investigated the effect of ethanol and nitrogen addition on hexose utilisation during wine fermentation in both natural and synthetic grape must. Addition of ethanol had a stronger inhibitory effect on fructose than on glucose utilisation. Supplementation of must with assimilable nitrogen stimulated fructose utilisation more than glucose utilisation. These results show that the discrepancy between glucose and fructose utilisation during fermentation is not a fixed parameter but is dependent on the inherent properties of the yeast strain and on the external conditions.     

Evaluation of stereoisomers of 2,3-butanediol and acetoin to differentiate Saccharomyces cerevisiae and Kloeckera apiculata wine strains

The (R)/(S) ratios of acetoin were always higher in wines obtained by Saccharomyces cerevisiae than in those obtained by Kloeckera apiculata. A significantly different behaviour was determined between the two species as regards contents and ratios of 2,3-butanediols: S. cerevisiae produced more (R,R)-2,3-butanediol (about 80%), whereas K. apiculata produced more meso-form (about 90%).     

Screening of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> wine strains for the production of acetic acid

In this study 80 wine strains of Saccharomyces cerevisiae were characterized for the production of acetic acid. A significant variability in the production levels was determined among the strains, which produced from a few mg/l to more than 1 g/l. Fifteen strains, differing in acetic acid production, were tested in fermentation of grape musts of different varieties (Aglianico Basilicata, Aglianico Apulia, Cannonau, Bombino nero, Nero d'Avola, Vermentino, Fiano). The results emphasized a great strain variability, but the best strain behaviour was strictly related to the must composition, which is a determinant factor on the expression of the best strain potentiality. Therefore, this study, confirming the high/low production of acetic acid as a strain characteristic, demonstrated also that the inoculated fermentation becomes more advantageous when the starter culture is chosen in relation to the interaction of yeast strain/vine variety.     

Aquaporins in Saccharomyces cerevisiae wine yeast

AQY1 and AQY2 were sequenced from five commercial and five native wine yeasts. Of these, two AQY1 alleles from UCD 522 and UCD 932 were identified that encoded three or four amino-acid changes, respectively, compared with the Sigma1278b sequence. Oocytes expressing these AQY1 alleles individually exhibited increased water permeability vs. water-injected oocytes, whereas oocytes expressing the AQY2 allele from UCD 932 did not show an increase, as expected, owing to an 11 bp deletion. Wine strains lacking Aqy1p did not show a decrease in spore fitness or enological aptitude under stressful conditions, limited nitrogen, or increased temperature. The exact role of aquaporins in wine yeasts remains unclear.     

Quantification of Saccharomyces cerevisiae viability using BacLight

Yeast viability can be accurately quantified using BacLight, a kit which so far has been used only for bacterial analysis. Upon staining, viable cells can be differentiated from non-viable ones by either confocal laser scanning microscopy (CLSM), epifluorescence microscopy, or flow cytometry. Using Saccharomyces cerevisiae as a model, viabilities quantified by CLSM deviated an average of 1.7% from the actual data, and those determined by flow-cytometry by 1.4%.     

NaCl stress inhibits maltose fermentation by Saccharomyces cerevisiae

While fermentation of 20 g glucose l^–1 by Saccharomyces cerevisiae was not impaired by high NaCl concentrations, fermentation of 20 g maltose l^–1 was significantly decreased by 0.7 M NaCl, and completely inhibited with 1.4 M NaCl. No glycerol was produced in response to the salt stress when yeast cells were fermenting maltose. Active maltose transport, and not intracellular hydrolysis, was the metabolic step severely impaired by the NaCl stress.     

Changes in the intracellular concentrations of the adenosine phosphates and nicotinamide adenine dinucleotides ofSaccharomyces cerevisiae during batch fermentation

Significant changes in the intracellular concentrations of adenosine phosphates and nicotinamide adenine dinucleotides were observed during fermentation of grape must by three different strains ofSaccharomyces cerevisiae: S. cerevisiae var.cerevisiae, a typical fermentative yeast strain and two flor-veil-forming strains,S. cerevisiae var.bayanus andS. cerevisiae var.capensis. The intracellular concentration of ATP was always higher inS. cerevisiae var.cerevisiae than in the flor-veil-forming strains. NAD⁺ and NADP⁺ concentrations decreased at faster rates in the flor-veil-forming yeasts than in the other yeast but NADH concentration was the same in all yeasts for the first 10 days of fermentation. NADPH concentration was always lower inS. cerevisiae var.cerevisiae than in the other yeasts and this yeast also showed higher rates of growth and fermentation during the early stages of the fermentation and the presence of non-viable cells at the end of fermentation. In contrast, the flor-veil-forming strains maintained growth and fermentation capabilities for a relatively long time and viable cells were present throughout the entire fermentation process (31 days).The authors are with the Department of Microbiology, Faculty of Sciences, University of Cordoba, Avda. San Alberto Magno s/n, 14004-Córdoba, Spain     

Evidence of different fermentation behaviours of two indigenous strains of Saccharomyces cerevisiae and Saccharomyces uvarum isolated from Amarone wine

Aims:  To explain the role of Saccharomyces cerevisiae and Saccharomyces uvarum strains (formerly Saccharomyces bayanus var. uvarum ) in wine fermentation.
Methods and Results:  Indigenous Saccharomyces spp. yeasts were isolated from Amarone wine (Italy) and analysed. Genotypes were correlated to phenotypes: Melibiose⁻ and Melibiose⁺ strains displayed a karyotype characterized by three and two bands between 225 and 365 kb, respectively. Two strains were identified by karyotype analysis (one as S. cerevisiae and the other as S. uvarum ). The technological characterization of these two strains was conducted by microvinifications of Amarone wine. Wines differed by the contents of ethanol, residual sugars, acetic acid, glycerol, total polysaccharides, ethyl acetate, 2-phenylethanol and anthocyanins. Esterase and β-glucosidase activities were assayed on whole cells during fermentation at 13° and 20°C. Saccharomyces uvarum displayed higher esterase activity at 13°C, while S. cerevisiae displayed higher β-glucosidase activity at both temperatures.
Conclusions:  The strains differed by important technological and qualitative traits affecting the fermentation kinetics and important aroma components of the wine.
Significance and Impact of the Study:  The contribution of indigenous strains of S. cerevisiae and S. uvarum to wine fermentation was ascertained under specific winemaking conditions. The use of these strains as starters in a winemaking process could differently modulate the wine sensory characteristics.     

Fermentation of high concentrations of lactose to ethanol by engineered flocculent Saccharomyces cerevisiae

The development of microorganims that efficiently ferment lactose has a high biotechnological interest, particularly for cheese whey bioremediation processes with simultaneous bio-ethanol production. The lactose fermentation performance of a recombinant Saccharomyces cerevisiae flocculent strain was evaluated. The yeast consumed rapidly and completely lactose concentrations up to 150 g l⁻¹ in either well- or micro-aerated batch fermentations. The maximum ethanol titre was 8% (v/v) and the highest ethanol productivity was 1.5–2 g l⁻¹ h⁻¹, in micro-aerated fermentations. The results presented here emphasise that this strain is an interesting alternative for the production of ethanol from lactose-based feedstocks.     

Comparative proteome analysis of robust <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> insights into industrial continuous and batch fermentation

A robust Saccharomyces cerevisiae strain has been widely applied in continuous and batch/fed-batch industrial fermentation. However, little is known about the molecular basis of fermentative behavior of this strain in the two realistic fermentation processes. In this paper, we presented comparative proteomic profiling of the industrial yeast in the industrial fermentation processes. The expression levels of most identified protein were closely interrelated with the different stages of fermentation processes. Our results indicate that, among the 47 identified protein spots, 17 of them belonging to 12 enzymes were involved in pentose phosphate, glycolysis, and gluconeogenesis pathways and glycerol biosynthetic process, indicating that a number of pathways will need to be inactivated to improve ethanol production. The differential expressions of eight oxidative response and heat-shock proteins were also identified, suggesting that it is necessary to keep the correct cellular redox or osmotic state in the two industrial fermentation processes. Moreover, there are significant differences in changes of protein levels between the two industrial fermentation processes, especially these proteins associated with the glycolysis and gluconeogenesis pathways. These findings provide a molecular understanding of physiological adaptation of industrial strain for optimizing the performance of industrial bioethanol fermentation. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Genetic segregation of natural Saccharomyces cerevisiae strains derived from spontaneous fermentation of Aglianico wine

AIMS: Investigation of the meiotic segregation of karyotypes and physiological traits in indigenous Saccharomyces strains isolated from Aglianico (South Italy) red wine. METHODS AND RESULTS: Segregation was studied in F1 and F2 descendants. Tetrads were isolated from sporulating cultures by micromanipulation. The spore clones were subjected to karyotype analysis by pulse-field gel electrophoresis (Bio-Rad model CHEF-DR II) and to various physiological tests. Certain chromosomes of the isolates showed 2:2 segregation patterns in F1 but proved to be stable in F2. The ability of cells to utilize maltose also segregated in a 2 : 2 manner in F1 and did not segregate in F2. Resistance to CuSO4, SO2 tolerance, the fermentative power and the production of certain metabolites segregated in both F1 and F2 generations and showed patterns indicating the involvement of polygenic regulation. CONCLUSIONS: The analysis revealed a high degree of genetic instability and demonstrated that meiosis can improve chromosomal and genetic stability. SIGNIFICANCE AND IMPACT OF THE STUDY: Winemaking is critically dependent on the physiological properties and genetic stability of the fermenting Saccharomyces yeasts. Selection of clones from F2 or later generations can be a method of reduction of genetic instability.