Comparative analysis of the proteinase specificity in wild-type and stabilized plasminogen activator inhibitor-1: evidence for contribution of intramolecular flexibility

PAI-1, the physiological inhibitor of tissue-type and urokinase-type plasminogen activator, is a unique member of the serpins as it exists in three distinct conformations: an active inhibitory conformation, a non-inhibitory substrate conformation, and a non-reactive latent conformation. Proline substitution of single residues in the P16-P20 region (situated at the proximal hinge of the reactive site loop) of wild-type PAI-1 (wtPAI-1) and a stabilized PAI-1-variant (PAI-1-stab; N150H, K154T, Q301P, Q319L, and M354I, t(1/2)=150), respectively, resulted in two series of PAI-1-variants with different properties. In wtPAI-1 only substitution at P18 resulted in a pronounced u-PA specificity and substrate behaviour towards t-PA. In contrast, in PAI-1-stab substitution at either P18, P19 or P20 resulted in a u-PA specificity and a significantly increased substrate behaviour towards t-PA and u-PA. Importantly, analysis of the kinetics of inhibition did not reveal any differences in the second-order rate constants of inhibition (k approximately 10(7)M(-1)s(-1)). The pronounced differences observed for identical mutations in wtPAI-1 vs PAI-1-stab demonstrate that not merely the sequence of the reactive loop but also intramolecular interactions between the hF/s3A-loop and the main part of the molecule govern the functional and conformational behaviour of PAI-1.     

The length of the reactive center loop modulates the latency transition of plasminogen activator inhibitor-1

Plasminogen activator inhibitor-1 (PAI-1) belongs to the serine protease inhibitor (serpin) protein family, which has a common tertiary structure consisting of three beta-sheets and several alpha-helices. Despite the similarity of its structure with those of other serpins, PAI-1 is unique in its conformational lability, which allows the conversion of the metastable active form to a more stable latent conformation under physiological conditions. For the conformational conversion to occur, the reactive center loop (RCL) of PAI-1 must be mobilized and inserted into the major beta-sheet, A sheet. In an effort to understand how the structural conversion is regulated in this conformationally labile serpin, we modulated the length of the RCL of PAI-1. We show that releasing the constraint on the RCL by extension of the loop facilitates a conformational transition of PAI-1 to a stable state. Biochemical data strongly suggest that the stabilization of the transformed conformation is owing to the insertion of the RCL into A beta-sheet, as in the known latent form. In contrast, reducing the loop length drastically retards the conformational change. The results clearly show that the constraint on the RCL is a factor that regulates the conformational transition of PAI-1.     

Purification of recombinant plasminogen activator inhibitor-1 in the active conformation by refolding from inclusion bodies

Plasminogen activator inhibitor-1 (PAI-1) acts as the major inhibitor of fibrinolysis by inhibiting tissue-type and urokinase-type plasminogen activators. Although it shares a common tertiary structure with other serine protease inhibitors, PAI-1 is unique in its conformational lability, which allows conversion of the active form to the latent conformation under physiological conditions. Therefore, recombinant PAI-1 expressed in eukaryotic or prokaryotic cells almost always contains its inactive, latent form, with very low specific activity. In this study, we developed a simple and efficient method for purifying the active form of recombinant PAI-1 rather than the latent conformation from PAI-1 overexpressing Escherichia coli cells. The overall level of expression and the amount of PAI-1 found in inclusion bodies were found to increase with culture temperature and with time after induction. Refolding of unfolded PAI-1 from inclusion bodies and ion-exchange column chromatography were sufficient to purify PAI-1. The purified protein yielded a single, 43kDa protein band upon SDS-polyacrylamide gel electrophoresis, and it efficiently inhibited tissue-type and urokinase-type plasminogen activators similar to PAI-1 from natural sources. Activity measurements showed that PAI-1 purified from inclusion bodies exhibited a specific activity near the theoretical maximum, unlike PAI-1 prepared from cytosolic fractions. Conformational analysis by urea gel electrophoresis also indicated that the PAI-1 protein purified from inclusion bodies was indeed in its active conformation.     

The reactive-center loop of active PAI-1 is folded close to the protein core and can be partially inserted

Plasminogen activator inhibitor 1 (PAI-1) is the main inhibitor of plasminogen activators and plays an important role in many pathophysiological processes. Like other members of the serpin family, PAI-1 has a reactive center consisting of a mobile loop (RCL) with P1 and P1' residues acting as a "bait" for cognate protease. In contrast to the other serpins, PAI-1 loses activity by spontaneous conversion to an inactive latent form. This involves full insertion of the RCL into beta-sheet A. To search for molecular determinants that could be responsible for conversion of PAI-1 to the latent form, we studied the conformation of the RCL in active PAI-1 in solution. Intramolecular distance measurements by donor-donor energy migration and probe quenching methods reveal that the RCL is located much closer to the core of PAI-1 than has been suggested by the recently resolved X-ray structures of stable PAI-1 mutants. Disulfide bonds can be formed in double-cysteine mutants with substitutions at positions P11 or P13 of the RCL and neighboring residues in beta-sheet A. This suggests that the RCL may be preinserted up to residue P13 in active PAI-1, and possibly even to residue P11. We propose that the close proximity of the RCL to the protein core, and the ability of the loop to preinsert into beta-sheet A is a possible reason for PAI-1 being able to convert spontaneously to its latent form.     

Mapping of a conformational epitope on plasminogen activator inhibitor-1 by random mutagenesis. Implications for serpin function

The mechanism for the conversion of plasminogen activator inhibitor-1 (PAI-1) from the active to the latent conformation is not well understood. Recently, a monoclonal antibody, 33B8, was described that rapidly converts PAI-1 to the latent conformation (Verhamme, I., Kvassman, J. O., Day, D., Debrock, S., Vleugels, N., Declerck, P. J., and Shore, J. D. (1999) J. Biol. Chem. 274, 17511-17517). In an attempt to understand this interaction, and more broadly to understand the mechanism of the natural transition of PAI-1 to the latent conformation, we have used random mutagenesis to identify the 33B8 epitope in PAI-1. This site involves at least 8 amino acids scattered over more than two-thirds of the linear sequence that form a compact epitope on the PAI-1 three-dimensional structure. Surface plasmon resonance studies indicate a high affinity interaction between latent PAI-1 and 33B8 that is approximately 100-fold higher than comparable binding to active PAI-1. Structural modeling results together with surface plasmon resonance analysis of parental and site-directed PAI-1 mutants with disrupted 33B8 binding suggest the existence of a specific PAI-1 intermediate structure that is stabilized by 33B8 binding. These analyses strongly suggest that this intermediate form of PAI-1 has a partial insertion of the reactive center loop into beta-sheet A, and together, these data have significant implications for the general serpin mechanism of proteinase inhibition.     

Structural factors affecting the choice between latency transition and polymerization in inhibitory serpins

Plasminogen activator inhibitor-1 (PAI-1), a member of the serine protease inhibitor (serpin) protein family, is unique among the serpins in its conformational lability. This lability allows spontaneous conversion of the active form to a more stable, latent conformation under physiological conditions. In other serpins, polymerization, rather than latency transition, is induced under pathological conditions or upon heat treatment. To identify specific factors promoting latency conversion in PAI-1, we mutated PAI-1 at various positions and compared the effects with those of equivalent mutations in alpha(1)-antitrypsin, the archetypal serpin. Mutations that improved interactions with the turn between helix F and the third strand of beta-sheet A (thFs3A) or the fifth strand of beta-sheet A (s5A), which are near the site of latency transition-associated insertion of the reactive center loop, retarded latency conversion but did not greatly increase structural stability. Mutations that decreased interactions with s2C facilitated conformational conversion, possibly by releasing the reactive center loop from beta-sheet C. Mutations of Thr93 that filled a hydrophobic surface pocket on s2A dramatically increased structural stability but had a negligible effect on the conformational transition. Our results suggest that the structural features controlling latency transition in PAI-1 are highly localized, whereas the conformational strain of the native forms of other inhibitory serpins is distributed throughout the molecule and induces polymerization.     

Latency and substrate binding globally reduce solvent accessibility of plasminogen activator inhibitor type 1 (PAI-1). An adaptation of PAI-1 conformer crystal structures by hydrogen-deuterium exchange

Plasminogen activator inhibitor type 1 (PAI-1) plays key regulatory roles in fibrinolysis, cell migration, and tissue remodeling. A regulatory protein without known catalytic activity, PAI-1 modulates plasminogen activators through protein-protein interactions. Although global conformational alterations that occur in PAI-1 determine its regulatory activity, comprehensive assessments of concurrent dynamic, structural, and functional alterations of this critical regulatory protein have not yet been clearly defined. X-ray crystallographic studies have described four distinct PAI-1 conformational states: active, latent, reactive center loop peptide-annealed (RCL-PA), and cleaved mutant. In this study, backbone amide hydrogen-deuterium exchange detected by mass spectrometry was used to characterize dynamic and structural alterations of human PAI-1 (hPAI-1) in relation to its function. hPAI-1 conformers were defined by surface mapping the solvent-accessible sites for strategic secondary structural components of the protein. We observed a global protection from solvent for a majority of peptides in the latent conformer relative to the active conformer. Significant differences were observed in the RCL, helix A, helix D, and sheet 1C, and these regions were markedly more dynamic or solvent-exposed in the active conformation. The RCL-PA form adopts an intermediate conformational state between the active and the latent conformers. Our results demonstrate that the most dynamic regions of PAI-1 (the RCL, helices D and A, and sheet 5A) are flexible in the transition toward latency. They also show that the dynamic surface structures of the active, latent, and peptide-annealed conformers of PAI-1 are underestimated by theoretical solvent accessibility calculations derived from crystallographic data.     

Metals affect the structure and activity of human plasminogen activator inhibitor-1. I. Modulation of stability and protease inhibition

Human plasminogen activator inhibitor type 1 (PAI-1) is a serine protease inhibitor with a metastable active conformation. Under physiological conditions, half of the inhibitor transitions to a latent state within 1-2 h. The interaction between PAI-1 and the plasma protein vitronectin prolongs this active lifespan by ～50%. Previously, our group demonstrated that PAI-1 binds to resins using immobilized metal affinity chromatography (Day, U.S. Pat. 7,015,021 B2, March 21, 2006). In this study, the effect of these metals on function and stability was investigated by measuring the rate of the transition from the active to latent conformation. All metals tested showed effects on stability, with the majority falling into one of two types depending on their effects. The first type of metal, which includes magnesium, calcium and manganese, invoked a slight stabilization of the active conformation of PAI-1. A second category of metals, including cobalt, nickel and copper, showed the opposite effects and a unique vitronectin-dependent modulation of PAI-1 stability. This second group of metals significantly destabilized PAI-1, although the addition of vitronectin in conjunction with these metals resulted in a marked stabilization and slower conversion to the latent conformation. In the presence of copper and vitronectin, the half-life of active PAI-1 was extended to 3 h, compared to a half-life of only ～30 min with copper alone. Nickel had the largest effect, reducing the half-life to ～5 min. Together, these data demonstrate a heretofore-unknown role for metals in modulating PAI-1 stability.     

The complex interplay between the neck and hinge domains in kinesin-1 dimerization and motor activity

Kinesin-1 dimerizes via the coiled-coil neck domain. In contrast to animal kinesins, neck dimerization of the fungal kinesin-1 NcKin requires additional residues from the hinge. Using chimeric constructs containing or lacking fungal-specific elements, the proximal part of the hinge was shown to stabilize the neck coiled-coil conformation in a complex manner. The conserved fungal kinesin hinge residue W384 caused neck coiled-coil formation in a chimeric NcKin construct, including parts of the human kinesin-1 stalk. The stabilizing effect was retained in a NcKinW384F mutant, suggesting important pi-stacking interactions. Without the stalk, W384 was not sufficient to induce coiled-coil formation, indicating that W384 is part of a cluster of several residues required for neck coiled-coil folding. A W384-less chimera of NcKin and human kinesin possessed a non-coiled-coil neck conformation and showed inhibited activity that could be reactivated when artificial interstrand disulfide bonds were used to stabilize the neck coiled-coil conformation. On the basis of yeast two-hybrid data, we propose that the proximal hinge can bind kinesin's cargo-free tail domain and causes inactivation of kinesin by disrupting the neck coiled-coil conformation.     

Evidence for a pre-latent form of the serpin plasminogen activator inhibitor-1 with a detached beta-strand 1C

Latency transition of plasminogen activator inhibitor-1 (PAI-1) occurs spontaneously in the absence of proteases and results in stabilization of the molecule through insertion of its reactive center loop (RCL) as a strand in beta-sheet A and detachment of beta-strand 1C (s1C) at the C-terminal hinge of the RCL. This is one of the largest structural rearrangements known for a folded protein domain without a concomitant change in covalent structure. Yet, the sequence of conformational changes during latency transition remains largely unknown. We have now mapped the epitope for the monoclonal antibody H4B3 to the cleft revealed upon s1C detachment and shown that H4B3 inactivates recombinant PAI-1 in a time-dependent manner. With fluorescence spectroscopy, we show that insertion of the RCL is accelerated in the presence of H4B3, demonstrating that the loss of activity is the result of latency transition. Considering that the epitope for H4B3 appears to be occluded by s1C in active PAI-1, this finding suggests the existence of a pre-latent conformation on the path from active to latent PAI-1 characterized by at least partial detachment of s1C. Functional characterization of mutated PAI-1 variants suggests that a salt-bridge between Arg273 and Asp224 may stabilize the pre-latent conformation. The binding of H4B3 and of a peptide targeting the cleft revealed upon s1C detachment was hindered by the glycans attached to Asn267. Conclusively, we have provided evidence for the existence of an equilibrium between active PAI-1 and a pre-latent form, characterized by reversible detachment of s1C and formation of a glycan-shielded cleft in the molecule.     

Molecular evolution of plasminogen activator inhibitor-1 functional stability.

Plasminogen activator inhibitor-1 (PAI-1) is a member of the serine protease inhibitor (serpin) supergene family and a central regulatory protein in the blood coagulation system. PAI-1 is unique among serpins in exhibiting distinct active and inactive (latent) conformations in vivo. Though the structure of latent PAI-1 was recently solved, the structure of the short-lived, active form of PAI-1 is not known. In order to probe the structural basis for this unique conformational change, a randomly mutated recombinant PAI-1 expression library was constructed in bacteriophage and screened for increased functional stability. Fourteen unique clones were selected, and shown to exhibit functional half-lives (T1/2S) exceeding that of wild-type PAI-1 by up to 72-fold. The most stable variant (T1/2 = 145 h) contained four mutations. Detailed analysis of these four mutations, individually and in combination, demonstrated that the markedly enhanced functional stability of the parent compound mutant required contributions from all four substitutions, with no individual T1/2 exceeding 6.6 h. The functional stability of at least eight of the remaining 13 compound mutants also required interactions between two or more amino acid substitutions, with no single variant increasing the T1/2 by > 10-fold. The nature of the identified mutations implies that the unique instability of the PAI-1 active conformation evolved through global changes in protein packing and suggest a selective advantage for transient inhibitor function.     

Importance of the hinge region between alpha-helix F and the main part of serpins, based upon identification of the epitope of plasminogen activator inhibitor type 1 neutralizing antibodies

The serpin plasminogen activator inhibitor type 1 (PAI-1) is an important protein in the regulation of fibrinolysis and inhibits its target proteinases through formation of a covalent complex. In the present study, we have identified the epitope of two PAI-1 neutralizing monoclonal antibodies (MA-33H1F7 and MA-55F4C12). Based upon differential cross-reactivity data of these monoclonals with PAI-1 from different species and on a sequence alignment between these PAI-1s, combined with the three-dimensional structure, we predicted that the residues Glu(128)-Val(129)-Glu(130)-Arg(131) and Lys(154) (at the hinge region between alpha-helix F and the main part of the PAI-1-molecule) might form the major site of interaction. Therefore a variety of alanine mutants were generated and evaluated for their affinity toward both monoclonal antibodies. The affinity constants of MA-55F4C12 and MA-33H1F7 for PAI-1 were 2.7 +/- 1.6 x 10(9) M(-1) and 5.4 +/- 1.7 x 10(9) M(-1), respectively, but decreased between 13- and 270-fold upon mutation of Lys(154) to Ala(154) or Glu(128)-Val(129)-Glu(130)-Arg(131) to Ala-Ala-Ala-Ala. The combined mutations (PAI-1-EVER/K), however, resulted in an absence of binding to either of the antibodies. Both antibodies bound to PAI-1-wt/t-PA complexes with a similar affinity as to PAI-1-wt (K(A) = 4-5 x 10(9) M(-1)). The epitope localization reveals the molecular basis for the neutralizing properties of both monoclonal antibodies. In addition, it provides new insights into the validity of various models that have been proposed for the serpin/proteinase complex, excluding full insertion of the reactive-site loop.     

Specific interactions of serpins in their native forms attenuate their conformational transitions

Plasminogen activator inhibitor-1 (PAI-1) belongs to the serine protease inhibitor (serpin) protein superfamily. Serpins are unique in that their native forms are not the most thermodynamically stable conformation; instead, a more stable, latent conformation exists. During the transition to the latent form, the first strand of beta-sheet C (s1C) in the serpin is peeled away from the beta-sheet, and the reactive center loop (RCL) is inserted into beta-sheet A, rendering the serpin inactive. To elucidate the contribution of specific interactions in the metastable native form to the latency transition, we examined the effect of mutations at the s1C of PAI-1, specifically in positions P4' through P10'. Several mutations strengthened the interactions between these residues and the core protein, and slowed the transition of the protein from the metastable native form to the latent form. In particular, anchoring of the strand to the protein's hydrophobic core at the beginning (P4' site) and center of the strand (P8' site) greatly retarded the latency transition. Mutations that weakened the interactions at the s1C region facilitated the conformational conversion of the protein to the latent form. PAI-1's overall structural stability was largely unchanged by the mutations, as evaluated by urea-induced equilibrium unfolding monitored via fluorescence emission. Therefore, the mutations likely exerted their effects by modulating the height of the energy barrier from the native to the latent form. Our results show that interactions found only in the metastable native form of serpins are important structural features that attenuate folding of the proteins into their latent forms.     

A redox-sensitive loop regulates plasminogen activator inhibitor type 2 (PAI-2) polymerization

Plasminogen activator inhibitor type 2 (PAI-2) is the only wild-type serpin that polymerizes spontaneously under physiological conditions. We show that PAI-2 loses its ability to polymerize following reduction of thiol groups, suggesting that an intramolecular disulfide bond is essential for the polymerization. A novel disulfide bond was identified between C79 (in the CD-loop) and C161 (at the bottom of helix F). Substitution mutants in which this disulfide bond was broken did not polymerize. Reactive center loop peptide insertion experiments and binding of bis-ANS to hydrophobic cavities indicate that the C79-C161 disulfide bond stabilizes PAI-2 in a polymerogenic conformation with an open A-beta-sheet. Elimination of this disulfide bond causes A-beta-sheet closure and abrogates the polymerization. The finding that cytosolic PAI-2 is mostly monomeric, whereas PAI-2 in the secretory pathway is prone to polymerize, suggests that the redox status of the cell could regulate PAI-2 polymerization. Taken together, our data suggest that the CD-loop functions as a redox-sensitive switch that converts PAI-2 between an active stable monomeric and a polymerogenic conformation, which is prone to form inactive polymers.     

Different structural requirements for plasminogen activator inhibitor 1 (PAI-1) during latency transition and proteinase inhibition as evidenced by phage-displayed hypermutated PAI-1 libraries

Plasminogen activator inhibitor type 1 (PAI-1) is a member of the serine protease inhibitor (serpin) superfamily. Its highly mobile reactive-center loop (RCL) is thought to account for both the rapid inhibition of tissue-type plasminogen activator (t-PA), and the rapid and spontaneous transition of the unstable, active form of PAI-1 into a stable, inactive (latent) conformation (t(1/2) at 37 degrees C, 2.2 hours). We determined the amino acid residues responsible for the inherent instability of PAI-1, to assess whether these properties are independent and, consequently, whether the structural basis for inhibition and latency transition is different. For that purpose, a hypermutated PAI-1 library that is displayed on phage was pre-incubated for increasing periods (20 to 72 hours) at 37 degrees C, prior to a stringent selection for rapid t-PA binding. Accordingly, four rounds of phage-display selection resulted in the isolation of a stable PAI-1 variant (st-44: t(1/2) 450 hours) with 11 amino acid mutations. Backcrossing by DNA shuffling of this stable mutant with wt PAI-1 was performed to eliminate non-contributing mutations. It was shown that the combination of mutations at positions 50, 56, 61, 70, 94, 150, 222, 223, 264 and 331 increases the half-life of PAI-1 245-fold. Furthermore, within the limits of detection the stable mutants isolated are functionally indistinguishable from wild-type PAI-1 with respect to the rate of inhibition of t-PA, cleavage by t-PA, and binding to vitronectin. These stabilizing mutations constitute largely reversions to the stable "serpin consensus sequence" and are located in areas implicated in PAI-1 stability (e.g. the vitronectin-binding domain and the proximal hinge). Collectively, our data provide evidence that the structural requirements for PAI-1 loop insertion during latency transition and target proteinase inhibition can be separated.     

Crystal structure of plasminogen activator inhibitor-1 in an active conformation with normal thermodynamic stability

The serpin plasminogen activator inhibitor-1 (PAI-1) is a crucial regulator in fibrinolysis and tissue remodeling. PAI-1 has been associated with several pathological conditions and is a validated prognostic marker in human cancers. However, structural information about the native inhibitory form of PAI-1 has been elusive because of its inherent conformational instability and rapid conversion to a latent, inactive structure. Here we report the crystal structure of PAI-1 W175F at 2.3 Å resolution as the first model of the metastable native molecule. Structural comparison with a quadruple mutant (14-1B) previously used as representative of the active state uncovered key differences. The most striking differences occur near the region that houses three of the four mutations in the 14-1B PAI-1 structure. Prominent changes are localized within a loop connecting β-strand 3A with the F helix, in which a previously observed 3₁₀-helix is absent in the new structure. Notably these structural changes are found near the binding site for the cofactor vitronectin. Because vitronectin is the only known physiological regulator of PAI-1 that slows down the latency conversion, the structure of this region is important. Furthermore, the previously identified chloride-binding site close to the F-helix is absent from the present structure and likely to be artifactual, because of its dependence on the 14-1B mutations. Instead we found a different chlorine-binding site that is likely to be present in wild type PAI-1 and that more satisfactorily accounts for the chlorine stabilizing effect on PAI-1.     

Accelerated conversion of human plasminogen activator inhibitor-1 to its latent form by antibody binding.

The serpin plasminogen activator inhibitor-1 (PAI-1) slowly converts to an inactive latent form by inserting a major part of its reactive center loop (RCL) into its beta-sheet A. A murine monoclonal antibody (MA-33B8), raised against the human plasminogen activator (tPA).PAI-1 complex, rapidly inactivates PAI-1. Results presented here indicate that MA-33B8 induces acceleration of the active-to-latent conversion. The antibody-induced inactivation of PAI-1 labeled with the fluorescent probe N, N'-dimethyl-N-(acetyl)-N'-(7-nitrobenz-2-oxa-1,3-diazol-4-yl) ethylene diamine (NBD) at P9 in the RCL caused a fluorescence enhancement and shift identical to those accompanying the spontaneous conversion of the P9.NBD PAI-1 to the latent form. Like latent PAI-1, antibody-inactivated PAI-1 was protected from cleavage by elastase. The rate constants for MA-33B8 binding, measured by NBD fluorescence or inactivation, were similar (1.3-1.8 x 10(4) M-1 s-1), resulting in a 4000-fold faster inactivation at 4.2 microM antibody binding sites. The apparent antibody binding rate constant, at least 1000 times slower than one limited by diffusion, indicates that exposure of its epitope depends on an unfavorable equilibrium of PAI-1. Our observations are consistent with this idea and suggest that the equilibrium involves partial insertion of the RCL into sheet A: latent, RCL-cleaved, and tPA-complexed PAI-1, which are inactive loop-inserted forms, bound much faster than active PAI-1 to MA-33B8, whereas two loop-extracted forms of PAI-1, modified to prevent loop insertion, did not bind or bound much more weakly to the antibody.     

Type-1 inhibitor of plasminogen activators. Distinction between latent, activated and reactive centre-cleaved forms with thermal stability and monoclonal antibodies.

Type-1 inhibitor of plasminogen activators (PAI-1) occurs in purified preparations in a latent form that can be activated with denaturants; in vivo, latency is prevented by binding to vitronectin. We have compared latent, denaturant-activated and reactive centre-cleaved human PAI-1 with respect to thermal stability and affinity to monoclonal antibodies. By both criteria, latent and cleaved PAI-1 are very similar or indistinguishable, and clearly different from active PAI-1. Our findings suggest that the conformations of latent and reactive centre-cleaved PAI-1 are similar and resemble the so-called relaxed (R) serpin conformation, while that of active PAI-1 is different and resembles the stressed (S) serpin conformation.     

Molecular modeling of an active loop structure in lysozyme. Sequence effects or crystal packing?

The Val99-Gly 104 variable region in egg white lysozyme is part of the active site cleft and of the epitope recognized by some monoclonal antibodies. In general, this loop is found in a conformation inflected towards the active site (proximal conformational) such as in free hen lysozyme (HEL). But in a lysozyme such as Japanese quail's (JEL), the loop turns away from the active site cleft (distal conformation). In order to differentiate sequence effects from crystal packing, we generated and refined loop conformations for the 99-104 variable region in lysozyme, then estimated their relative conformational free energies. Some of the results indicate that (i) the flexibility of the 99-104 segment is much greater for HEL than for JEL sequences when unconstrained by the crystal lattice, (ii) for JEL, only distal structures are favored, while for HEL the states span the zone between proximal and distal regions, and (iii) epitopes elucidated from crystal structures may not always be conserved in solution. For the JEL loop, model building shows that an energy-costly distal to proximal transition appears necessary. Finally, analysis of available structural data indicates that changes of humidity, temperature and pressure on loop conformation are negligible.     

The active conformation of plasminogen activator inhibitor 1, a target for drugs to control fibrinolysis and cell adhesion.

BACKGROUND: Plasminogen activator inhibitor 1 (PAI-1) is a serpin that has a key role in the control of fibrinolysis through proteinase inhibition. PAI-1 also has a role in regulating cell adhesion processes relevant to tissue remodeling and metastasis; this role is mediated by its binding to the adhesive glycoprotein vitronectin rather than by proteinase inhibition. Active PAI-1 is metastable and spontaneously transforms to an inactive latent conformation. Previous attempts to crystallize the active conformation of PAI-1 have failed. RESULTS: The crystal structure of a stable quadruple mutant of PAI-1(Asn150-->His, Lys154-->Thr, Gln319-->Leu, Met354-->Ile) in its active conformation has been solved at a nominal 3 A resolution. In two of four independent molecules within the crystal, the flexible reactive center loop is unconstrained by crystal-packing contacts and is disordered. In the other two molecules, the reactive center loop forms intimate loop-sheet interactions with neighboring molecules, generating an infinite chain within the crystal. The overall conformation resembles that seen for other active inhibitory serpins. CONCLUSIONS: The structure clarifies the molecular basis of the stabilizing mutations and the reduced affinity of PAI-1, on cleavage or in the latent form, for vitronectin. The infinite chain of linked molecules also suggests a new mechanism for the serpin polymerization associated with certain diseases. The results support the concept that the reactive center loop of an active serpin is flexible and has no defined conformation in the absence of intermolecular contacts. The determination of the structure of the active form constitutes an essential step for the rational design of PAI-1 inhibitors.