叶酸白蛋白靶向纳米粒的肿瘤细胞吸收及叶酸受体相关基因表达研究

实验选用叶酸受体表达阳性FR(+)卵巢癌细胞株SKOV3与表达阴性的FR(-)肺癌细胞株A549,通过肿瘤细胞对叶酸白蛋白靶向纳米粒的吸收及叶酸受体相关基因的表达,研究分析叶酸白蛋白靶向纳米粒叶酸受体吸收特征及叶酸受体胞吞途径的参与机制。结果表明:随着叶酸白蛋白靶向纳米粒给药时间的增加,SKOV3细胞FR1基因的表达显著增强,而A549细胞未见FR1基因表达。同时SKOV3细胞FR1基因的表达程度与细胞摄取叶酸白蛋白靶向纳米粒的量成正相关。叶酸代谢通路相关的基因(RFC、FPGS、GGH)表达,研究显示叶酸白蛋白靶向纳米粒能够启动细胞膜叶酸通道相关蛋白的表达。     

载10-甲氧基喜树碱缓释纳米粒的制备、表征与体外释药研究

以高分子多聚物聚乳酸(PLA)为材料,10-甲氧基喜树碱(Me OCPT)为模型药物,采用乳化溶剂挥发法制备载10-甲氧基喜树碱缓释纳米粒,表征并考察其体外释药特性。透射电子显微镜观察缓释纳米粒具有明显的球状结构,确定了最佳投料比为0.02∶1,平均粒径在100~250 nm之间,包封率和载药量分别为83.57±3.45%和3.10±1.19%,体外持续缓慢释放达48 h以上,累计释放率超过70%,缓释效果明显。以乳化溶剂挥发法成功制备的载10-甲氧基喜树碱缓释纳米粒,为聚乳酸作为药物缓控释载体的进一步研究提供依据,为难溶性小分子药物研究提供方向。     

长春新碱阳离子纳米结构脂质载体及其小肠吸收的研究

目的:硫酸长春新碱作为一种细胞毒型抗肿瘤药物,临床上多用其注射剂,虽应用广泛,但存在较多缺点,如药物半衰期短,代谢速率快以及毒副作用明显。本文目的是制备包载长春新碱和十二烷基磺酸钠的阳离子纳米结构脂质载体,并对其进行评价。方法:用复乳挥发法制备出目标脂质纳米粒;利用激光粒度仪对其粒径及zeta电位进行检测;利用高效液相色谱法对其包封率和载药量进行测定;透析法检测纳米粒的体外释放行为;用小肠吸收法评价纳米粒的促进吸收作用。结果:制得的纳米粒的平均粒径为(192.4±4.14)nm,多分散系数(PDI)为0.184±0.015,包封率为32.28%,Zeta电位为(30.6±4.09)m V,载药量为(1.56±0.10)%;体外释放实验显示在pH=7.4的中性释放介质中,硫酸长春新碱脂质纳米粒表现出缓释特性;小肠吸收实验表明十二烷基磺酸钠的加入和阳离子纳米粒的修饰可提高小肠对药物的吸收。结论:阳离子硫酸长春新碱纳米结构脂质载体具有缓释效果,并可以促进小肠对药物的吸收。     

抗肿瘤多药耐药纳米粒的制备及其对MCF-7/ADR 细胞的体外评价

目的:肿瘤的多药耐药现象会显著降低肿瘤细胞内药物浓度,本研究通过制备抗肿瘤多药耐药的靶向给药系统来逆转肿瘤的耐药性以提升细胞对药物的敏感性,从而降低该现象对癌症治疗的阻碍。方法:本文使用乳化溶剂挥发法制备以含姜黄素两亲性嵌段共聚物载体、以紫杉醇和磁性粒为核心的抗肿瘤多药耐药纳米粒,使用透射电镜和动态粒径散射仪等对纳米粒进行表征和磁响应性测试后,使用MTT法测定纳米粒对肿瘤耐药细胞MCF-7/ADR的抑制率以探究给药系统的耐药逆转性能。结果:制备的抗肿瘤多耐药纳米粒粒径为105 nm左右,磁响应性良好。所制得载紫杉醇纳米粒包封率为74.74%,载药率为12.40%。纳米粒可以通过磁场和生物素受体介导作用促进肿瘤细胞对粒子的内化,以增加抗癌药物的蓄积。与游离紫杉醇相比,逆转细胞耐药指数达8.5。结论:纳米系统在维持自身稳定性同时,能够凭借协同作用和靶向作用较大程度提升药物对耐药肿瘤细胞的杀伤效果。     

藤黄酸聚乳酸纳米粒的研制

以新型材料聚乳酸(PLA)为载体,研制出质量稳定的藤黄酸聚乳酸纳米粒(GA-PLA-NPs)乳液制剂,并对其安全性进行评价。采用改良的溶剂蒸发法制备藤黄酸聚乳酸纳米粒(GA-PLA-NPs);用透射电子显微镜（TEM）观察纳米粒的形态;用激光粒度分析仪测定其平均粒径大小和分布;经超速离心后用紫外分光光度计测定纳米粒的包封率与载药量;考察藤黄酸纳米粒的体外释放特性;经急性毒性实验考察藤黄酸纳米粒的安全性。得到确定处方工艺为：水相∶有机相为2∶1（v/v）,表面活性剂在有机相中的浓度为0.5%（w/v）,藤黄酸（GA）在有机相中的浓度为0.1%（w/v）,GA∶PLA为1∶4（w/w）。处方条件下制备的纳米粒平均粒径为51.36 nm;平均包封率与载药量分别为98.87%和13.3%;藤黄酸纳米粒的体外释药分为两相：突释期和缓释期;急性毒性试验测得藤黄酸纳米粒的ID50为26.3mg/kg。制备的藤黄酸聚乳酸纳米粒（GA-PLA-NPs）质量稳定、分散性良好。聚乳酸可能成为藤黄酸的新型载体。     

叶酸-壳聚糖Prdx6 shRNA纳米粒的构建及其对胃癌细胞增殖的影响

目的:探讨叶酸-壳聚糖Prdx6 shRNA纳米粒对胃癌细胞生长的影响。方法:制备靶向性叶酸-壳聚糖Prdx6 shRNA纳米粒,原子力显微镜观察其形态,激光粒度分析仪测定纳米粒的粒径;倒置荧光显微镜观察叶酸-壳聚糖Prdx6 shRNA纳米粒的转染效率;采用蛋白质印迹法检测胃癌细胞Prdx6蛋白的表达变化;CCK8细胞增殖实验检测胃癌细胞的存活率。结果:1制备成功叶酸-壳聚糖Prdx6 shRNA向纳米粒。2荧光显微镜下观察靶向性叶酸-壳聚糖Prdx6 shRNA纳米粒转染胃癌细胞的效率明显高于非靶向纳米粒;胃癌细胞转染靶向组纳米粒后Prdx6蛋白的表达显著低于非靶向组。3与对照组相比,叶酸-壳聚糖Prdx6 shRNA纳米粒能够明显抑制胃癌细胞的增殖(P0.01)。结论:1叶酸-壳聚糖Prdx6 shRNA纳米粒可高效转染胃癌细胞。2转染叶酸-壳聚糖Prdx6 shRNA纳米粒后胃癌细胞的生长明显受抑制。     

硫酸长春碱聚乳酸缓释纳米粒的制剂学研究和体外释放度考察

目的:制备硫酸长春碱聚乳酸纳米粒(VLB-PLA-NPs)并考察其体外释放度.方法:采用复乳挥发法制备VLB-PLA-NPs,以包封率为主要指标评价指标,选择聚乳酸用量、超声时间、外水相浓度为考察因素,优化制备工艺,考察体外释放度.结果:优化工艺制备得VLB-PLA-NPs平均粒径为65±3.03nm,包封率为(99.68±0.30)%,载药量为3.323±0.01μg/mg,体外释放可持续20天.结论:该制备工艺操作简便,结果稳定,缓释特征明显,应用前景良好.     

负载雷公藤甲素的TPGS-b-(PCL-ran-PGA)纳米制剂体外抑制宫颈癌细胞生长的研究

雷公藤甲素（triptolide,TPL）是传统中药雷公藤的主要活性成分,具有抗炎、抗肿瘤活性,但其毒副作用限制了临床上的广泛使用。为了探讨以TPGS-b-(PCL-ran-PGA)为载体制备的TPGS-b-(PCL-ran-PGA)/TPL纳米粒的表征和体外对宫颈癌细胞的抑制作用,采用乳化/溶剂挥发法,优化TPGS-b-(PCL-ran-PGA)与TPL比例,制备TPGS-b-(PCL-ran-PGA)/TPL纳米粒,对纳米粒进行表征,包括粒径大小、ζ电位、包封率、累积释放率,用MTS法体外研究游离型TPL和TPGS-b-(PCL-ran-PGA)/TPL纳米粒对宫颈癌细胞半数抑制浓度（IC50）,用克隆形成实验分析TPGS-b-(PCL-ran-PGA)/TPL纳米粒对宫颈癌细胞HeLa的抑制作用,用流式细胞仪分析纳米粒对HeLa细胞凋亡的影响。结果显示：当TPGS-b-(PCL-ran-PGA)与TPL为50∶1时制备的纳米粒粒径为(95.3±5.2)nm,zeta电位为(-12.2±0.9)mV,其累积释放曲线呈双相分布,TPGS-b-(PCL-ran-PGA)纳米粒对HeLa细胞在24、48和72 h的IC50（2.8、1.8、0.9 μg·L-1）远远低于游离型TPL（P<0.01）,克隆形成实验证明纳米粒能显著抑制肿瘤细胞生长,并能显著诱导HeLa细胞凋亡。研究结果表明,TPGS-b-(PCL-ran-PGA)/TPL纳米粒能抑制宫颈癌细胞HeLa的生长,其作用主要通过TPL和TPGS共同诱导细胞凋亡,可以作为抗宫颈癌等肿瘤的候选药物。     

叶酸受体介导的负载紫杉醇纳米药物输送系统的制备

目的:构建靶向肿瘤组织的药物输送系统,是解决目前临床肿瘤化疗问题的有效途径之一.我们拟开展叶酸受体介导的负载紫杉醇纳米药物输送系统的制备及其表征.方法:以丁二酰化肝素为载体,通过碳二亚胺法将叶酸和丁二酰化肝素连接,制备肝素-叶酸偶联物,然后通过物理方法将紫杉醇包裹在肝素-叶酸偶联物中,在水溶性条件下体系自组装成肝素-叶酸-紫杉醇纳米粒.应用核磁共振氢谱(1H NMR),动态光散射(DLS)和扫描电子显微镜(SEM)对构建的纳米药物结构进行表征,同时观测其在水溶性条件下的自组装行为.结果:成功制备了肝素-叶酸-紫杉醇纳米药物输送系统,检测表明药物系统带有8.5％(w/w)的叶酸并负载9.6％(w/w)的药物,SEM检测表明形成了球状的纳米颗粒,DLS表明粒子的粒径在了86 nm左右.结论:我们成功制备了叶酸受体介导的负载紫杉醇的纳米药物输送系统,在进一步开展的生物活性的检测中,希望通过叶酸受体的靶向作用,引导药物定向分布在肿瘤组织,从而提高化疗药物的治疗效果同时降低其对正常细胞的毒副作用,为开发新型靶向药物输送系统提供基础.     

不同pH值与电位耦合对牛血清白蛋白包被酒石酸长春瑞滨纳米粒制备工艺的影响

在反溶剂法制备纳米粒过程中,pH值在一定程度上会对其产生影响。本文通过在不同酸碱环境下运用反溶剂法制备牛血清白蛋白包被酒石酸长春瑞滨纳米粒,进而借助于电位耦合作用来研究纳米粒制备工艺。研究结果表明:当pH=4.5至7.5时,酒石酸长春瑞滨和牛血清白蛋白带有异种电荷,而当pH=2.5,3.5,8.5,9.5时它们均带有同种电荷。当pH=7.5时,牛血清白蛋白带有负电荷即-8.52 mV,酒石酸长春瑞滨带有正电荷即+4.48mV。此时得到牛血清白蛋白包被酒石酸长春瑞滨纳米粒粒径为193.3 nm,Zeta电位为-30.86 mV,而且在该pH下对纳米粒制备工艺进行了优化,最终它的载药量和包封率达到了45.6%和90.6%。     

Encapsulation of paclitaxel in macromolecular nanoshells

An electrostatic layer-by-layer self-assembly technique was used to encapsulate solid core paclitaxel nanoparticles within a polymeric nanometer-scale shell. This approach provides a new strategy for the development of polymeric vehicles that control drug release and target diseased tissues and cells specific to the ailment, such as breast cancer. Core paclitaxel nanoparticles, 153 +/- 28 nm in diameter, were prepared using a modified nanoprecipitation technique. A nanoshell composed of multilayered polyelectrolytes, poly(allylamine hydrochloride) and poly(styrene-4-sulfonate) was assembled stepwise onto core charged drug nanoparticles. In vitro studies were performed to determine the anticancer activity of paclitaxel core-shell nanoparticles. Paclitaxel core-shell nanoparticles induced cell cycle arrest in the G2/M phase after 24 and 48 h of incubation with a human breast carcinoma cell line, MCF-7. Changes in MCF-7 cell morphology, fragmentation of the nucleus, and loss of cell-cell contacts indicated that the cells responded to paclitaxel core nanoparticles upon treatment for 24 and 48 h. Cells arrested in G2/M phase illustrated abnormal microtubule and actin cytoskeleton morphology. The core-shell drug nanoparticles fabricated using this procedure provide a new approach in the delivery of paclitaxel devoid of Cremophor EL, a solvent that causes adverse side effects in patients undergoing chemotherapy for treatment of metastasized mammary cancers.     

Paclitaxel targets mitochondria upstream of caspase activation in intact human neuroblastoma cells

We previously reported that paclitaxel acted directly on mitochondria isolated from human neuroblastoma SK-N-SH cells. Here, we demonstrate that the direct mitochondrial effect of paclitaxel observed in vitro is relevant in intact SK-N-SH cells. After a 2 h incubation with 1 microM paclitaxel, the mitochondria were less condensed. Paclitaxel (1 microM, 1-4 h) also induced a 20% increase in respiration rate and a caspase-independent production of reactive oxygen species by mitochondria. The paclitaxel-induced release of cytochrome c was detected only after 24 h of incubation, was caspase-independent and permeability transition pore-dependent. Thus, paclitaxel targets mitochondria upstream of caspase activation, early during the apoptotic process in intact human neuroblastoma cells.     

Functionalized amphiphilic hyperbranched polymers for targeted drug delivery

Amphiphilic hyperbranched core-shell polymers with folate moieties as the targeting groups were synthesized and characterized. The core of the amphiphilic polymers was hyperbranched aliphatic polyester Boltorn H40. The inner part and the outer shell of the amphiphilic polymers were composed of hydrophobic poly(epsilon-caprolactone) segments and hydrophilic poly(ethylene glycol) (PEG) segments, respectively. To achieve tumor cell targeting property, folic acid was further incorporated to the surface of the amphiphilic polymers via a coupling reaction between the hydroxyl group of the PEG segment and the carboxyl group of folic acid. The polymers were characterized by (1)H NMR, (13)C NMR, and combined size-exclusion chromatography and multiangle laser light scattering analysis. The nanoparticles of the amphiphilic polymers prepared by dialysis method were characterized by transmission electron microscopy and particle size analysis. Two antineoplastic drugs, 5-fluorouracil and paclitaxel, were encapsulated into the nanoparticles. The drug release property and the targeting of the drug-loaded nanoparticles to different cells were evaluated in vitro. The results showed the drug-loaded nanoparticles exhibited enhanced cell inhibition because folate targeting increased the cytotoxicity of drug-loaded nanoparticles against folate receptor expressing tumor cells.     

纳米紫杉类药物在乳腺癌治疗中的研究现状

紫杉醇虽被证明在多种肿瘤治疗中均具有良好的效果,但其有一个严重的缺陷:水溶性低。临床使用中需使用聚氧乙烯蓖麻油(CremphorEL)或无水乙醇作为溶剂,但其在体内降解时能释放组胺,导致严重的过敏反应以及肾毒性和神经毒性等不良反应,此外还存在患者耐受性差、血药浓度低、靶向性差等不足。在乳腺癌的诊断和治疗中,纳米技术改变了紫杉醇制剂的特征参数而使药物表现出缓释、控释性及靶向性等优势,解决了传统紫杉醇制剂水溶性差的缺点,提高了药物的生物利用度,并明显降低了紫杉醇的毒性和副作用,给紫杉醇药物在体内运输提供了新途径。     

High affinity binding of paclitaxel to human serum albumin.

Paclitaxel, a very potent antitumor agent is a hydrophobic molecule with low aqueous solubility. Its currently used formula (Taxol) contains the drug in a 1 : 1 (v/v) mixture of ethanol and Cremophor EL. To minimize vehicle-related toxicity, we developed a novel, water-soluble formulation in which paclitaxel is bound noncovalently to human serum albumin. For this purpose, studies of the paclitaxel-albumin binding equilibrium were performed. Paclitaxel dissolved in ethanol was added to the aqueous solution of human serum albumin. Precipitated paclitaxel was removed and unbound drug was separated by ultrafiltration. Paclitaxel concentration was measured by RP-HPLC. Binding data were evaluated based both on the Scatchard plot and the general binding equation describing binding equilibria with the stepwise stoichiometric binding constants. The Scatchard plot was found to be curvilinear with a slight positive slope of the final part. Parameters of high affinity specific binding were determined from the initial part of the curve (nsp = 1.3 and Ksp = 1.7 x 10(6) M(-1)). Stoichiometric binding constants were estimated by fitting the general binding equation to the experimental data (K1 = 2.4 x 10(6) M(-1) and K2 = 1.0 x 10(5) M(-1)). Saturation of the protein with paclitaxel, similarly to other ligands of albumin, could not be reached. The greatest observed value of r (number of paclitaxel molecules bound to one albumin molecule) was 6.6.     

Self-assembled poly(butadiene)-b-poly(ethylene oxide) polymersomes as paclitaxel carriers

In this work, self-assembled poly(butadiene)-b-poly(ethylene oxide) (PB-PEO) polymersomes (polymer vesicles) and worm micelles were evaluated as paclitaxel carriers. Paclitaxel was successfully incorporated into PB-PEO polymersomes and worm micelles. The loading capacity of paclitaxel inside PB-PEO colloids ranged from 6.7% to 13.7% w/w, depending on the morphology of copolymer colloids and the molecular weight of diblock copolymer. Paclitaxel loaded OB4 (PB219-PEO121) polymersome formulations were colloidally stable for 4 months at 4 degrees C and exhibited slow steady release of paclitaxel over a 5 week period at 37 degrees C. Evaluation of the in vitro cytotoxicity of paclitaxel-polymersome formulations showed that the ability of paclitaxel-loaded polymersomes to inhibit proliferation of MCF-7 human breast cancer cells was less compared to paclitaxel alone. By increasing the concentration of paclitaxel in polymersomes from 0.02 to 0.2 mug/mL, paclitaxel-polymersome formulations showed comparable activity in inhibiting the growth of MCF-7 cells. Taken together, these results demonstrate that paclitaxel-polymersomes have desirable restrained release profile and exhibit long-term stability.     

Formulation and <Emphasis Type="Italic">In vitro</Emphasis> Characterization of Eudragit® L100 and Eudragit® L100-PLGA Nanoparticles Containing Diclofenac Sodium

The aim of this study was to formulate and characterize Eudragit® L100 and Eudragit® L100-poly(lactic-co-glycolic acid) (PLGA) nanoparticles containing diclofenac sodium. Diclofenac generates severe adverse effects with risks of toxicity. Thus, nanoparticles were prepared to reduce these drawbacks in the present study. These nanoparticles were evaluated for surface morphology, particle size and size distribution, percentage drug entrapment, and in vitro drug release in pH 6.8. The prepared nanoparticles were almost spherical in shape, as determined by atomic force microscopy. The nanoparticles with varied size (241–274 nm) and 25.8–62% of entrapment efficiency were obtained. The nanoparticles formulations produced the release profiles with an initial burst effect in which diclofenac sodium release ranged between 38% and 47% within 4 h. The extent of drug release from Eudragit® L100 nanoparticles was up to 92% at 12 h. However, Eudragit®/PLGA nanoparticles showed an initial burst release followed by a slower sustained release. The cumulative release at 72 h was 56%, 69%, and 81% for Eudragit®/PLGA (20:80), Eudragit®/PLGA (30:70) and Eudragit®/PLGA (50:50) nanoparticles, respectively. The release profiles and encapsulation efficiencies depended on the amount of Eudragit in the blend. These data demonstrated the efficacy of these nanoparticles in sustaining the diclofenac sodium release profile.     

Polyelectrolyte nanoparticles based on water-soluble chitosan-poly(l-aspartic acid)-polyethylene glycol for controlled protein release

Water-soluble chitosan (WSC)-poly(l-aspartic acid) (PASP)-polyethylene glycol (PEG) nanoparticles (CPP nanoparticles) were prepared spontaneously under quite mild conditions by polyelectrolyte complexation. These nanoparticles were well dispersed and stable in aqueous solution, and their physicochemical properties were characterized by turbidity, FTIR spectroscopy, dynamic light scattering (DLS), transmission electron microscope (TEM), and zeta potential. PEG was chosen to modify WSC-PASP nanoparticles to make a protein-protective agent. Investigation on the encapsulation efficiency and loading capacity of the bovine serum albumin (BSA)-loaded CPP nanoparticles was also conducted. Encapsulation efficiency was obviously decreased with the increase of initial BSA concentration. Furthermore, its in vitro release characteristics were evaluated at pH 1.2, 2.5, and 7.4. In vitro release showed that these nanoparticles provided an initial burst release, followed by a slowly sustained release for more than 24 h. The BSA released from CPP nanoparticles showed no significant conformational change compared with native BSA, which is superior to the BSA released from nanoparticles without PEG. A cell viability study suggested that the nanoparticles had good biocompatibility. This nanoparticle system was considered promising as an advanced drug delivery system for the peptide and protein drug delivery.     

In vitro investigation on poly(lactide)-Tween 80 copolymer nanoparticles fabricated by dialysis method for chemotherapy

Polysorbate 80 (Tween 80) has been widely used as an emulsifier with excellent effects in nanoparticles technology for biomedical applications. This work was thus triggered to synthesize poly(lactide)/Tween 80 copolymers with various copolymer blend ratio, which were synthesized by ring-opening polymerization and characterized by 1H NMR and TGA. Nanoparticles of poly(lactide)/Tween 80 copolymers were prepared by the dialysis method without surfactants/emulsifiers involved. Paclitaxel was chosen as a prototype anticancer drug due to its excellent therapeutic effects against a wide spectrum of cancers. The drug-loaded nanoparticles of poly(lactide)/Tween 80 copolymers were then characterized by various state-of-the-art techniques, including laser light scattering for particles size and size distribution, field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) for surface morphology; laser Doppler anemometry for zeta potential; differential scanning calorimetry (DSC) for the physical status of the drug encapsulated in the polymeric matrix; X-ray photoelectron spectrometer (XPS) for surface chemistry; high performance liquid chromatography (HPLC) for drug encapsulation efficiency; and in vitro drug release kinetics. HT-29 cells and Glioma C6 cells were used as an in vitro model of the GI barrier for oral chemotherapy and a brain cancer model to evaluate in vitro cytotoxicity of the paclitaxel-loaded nanoparticles. The viability of C6 cells was decreased from 37.4 +/- 4.0% for poly(D,L-lactide-co-glycolic acid) (PLGA) nanoparticles to 17.8 +/- 4.2% for PLA-Tween 80-10 and 12.0 +/- 5.4% for PLA-Tween 80-20 copolymer nanoparticles, which was comparable with that for Taxol at the same 50 microg/mL drug concentration.     

长循环紫杉醇纳米脂质体的合成及其活性评估

目的：研制甲氧基聚乙二醇二硬脂酰磷脂酰乙醇胺（mPEG2000-DSPE）修饰的长循环紫杉醇纳米脂质体（PEG-PTX-LP）,减少市售紫杉醇制剂的不良反应并增强疗效。方法：采用薄膜超声分散法制备PEG-PTX-LP,采用激光散射粒度分析仪和透射电镜观察其物理性状,超滤法检测药物包封率,透析法检测药物缓释能力,通过细胞摄取试验观察人脐静脉内皮细胞（Human Umbilical Vein Endothelial Cells,HUVEC）、A549肺癌细胞对PEG-PTX-LP的摄取能力。结果：透射电镜显示长循环紫杉醇纳米脂质体呈圆形囊泡样结构,粒径检测其平均粒径为99.1 nm,制备后第2、7、14、21、30天的紫杉醇包封率均大于99%,在血清中的缓释能力优于泰素溶液,HUVEC、A549细胞对PEG-PTX-LP中紫杉醇的摄取量明显高于泰素溶液（Taxol）。结论：采用mPEG2000-DSPE修饰的PEG-PTX-LP具有更高的稳定性和缓释能力,对肿瘤细胞和血管内皮细胞有一定的特异性,是一种更有效的紫杉醇新剂型。