Design, synthesis and conformational analysis of gamma-turn peptide mimetics of bradykinin.

Gamma-turns are regular secondary structure elements, found with some frequency in small peptides, that have been implicated in the biologically active conformations of several systems. This report describes the design, synthesis and conformational analysis of a non-peptide gamma-turn mimetic. Low energy conformations of the mimetic system exhibit good conformational agreement with an experimentally observed peptide gamma-turn. The mimetics were incorporated into the nonapeptide bradykinin, for which a gamma-turn, formed by residues Ser 6 to Phe 8, has been hypothesized to be a bioactive conformation. The results indicate that a bioactive conformation of bradykinin may include a reverse turn at this position.     

Beta-alanine containing peptides: a novel molecular tool for the design of gamma-turns.

In the present paper we describe the synthesis, purification, single crystal x-ray analysis, and solution conformational characterization of the cyclic tetrapeptide cyclo-(L-Pro-beta-Ala-L-Pro-beta-Ala). This peptide was synthesized by classical solution methods and the cyclization of the free tetrapeptide was accomplished in good yields in diluted methylene chloride solution using N,N-dicyclohexyl-carbodiimide (DCCI). The compound crystallizes in the orthorombic space group P2(1)2(1)2(1) from ethyl acetate. All peptide bonds are trans. The molecular conformation is stabilized by two intramolecular hydrogen bonds between the CO and NH groups of the two beta-alanine residues. These hydrogen bonds take place in a C7 structure in which both proline residues occupy the 2 position of an inverse gamma-turn. The two beta-alanine residues have a typical folded conformation (around the C alpha-C beta bond) observed in other cyclic peptides containing this residue. A detailed 1H-nmr analysis in CD3CN solution has been carried out. The molecule assumes a twofold symmetry in solution with a molecular conformation consistent with that observed in the solid state.     

Synthesis of delta(E)Phe-containing tripeptide via photoisomerization and its conformation in solution

A new synthetic route to (E)-beta-phenyl-alpha,beta-dehydroalanine (delta(E)Phe)-containing peptide was presented via photochemical isomerization of the corresponding (Z)-beta-phenyl-alpha,beta-dehydroalanine (delta(Z)Phe)-containing peptide. By applying this method to Boc-Ala-delta(Z)Phe-Val-OMe (Z-I: Boc, t-butoxycarbonyl; OMe, methoxy), Boc-Ala-delta(E)Phe-Val-OMe (E-I) was obtained. The identification of peptide E-I was evidenced by 1H-nmr, 13C-nmr, and uv absorption spectroscopy, elemental analysis, and hydrogenation. The conformation of peptide E-I in CDCl3 was investigated by 1H-nmr spectroscopy (solvent dependence of NH chemical shift and difference nuclear Overhauser effect). Interestingly, peptide E-I differed from peptide Z-I in the hydrogen-bonding mode. Namely, for peptide Z-I, only Val NH participates in intramolecular hydrogen bonding, which leads to a type II beta-turn conformation supported by hydrogen bonding between CO(Boc) and NH(Val). On the other hand, for peptide E-I, two NHs, delta(E)Phe NH and Val NH, participate in intramolecular hydrogen bonding. In both peptides, a remarkable NOE (approximately 11-13%) was observed for Ala C(alpha) H-deltaPhe NH pair. Based on the nmr data and conformational energy calculation, it should be concluded that peptide E-I takes two consecutive gamma-turn conformations supported by hydrogen bonding between CO(Boc) and NH(delta(E)Phe), and between CO(Ala) and NH(Val) as its plausible conformation.     

Impact of a micellar environment on the conformations of two cyclic pentapeptides.

In an effort to explore the influence of interfacial environments on reverse turns, we have performed a detailed analysis by nmr of the solution conformations of two cyclic pentapeptides in sodium dodecyl sulfate (SDS) micelles. The first peptide, cyclo (D-Phe1-Pro2-Gly3-D-Ala4-Pro5), adopts a single rigid conformation in solution (either chloroform or dimethylsulfoxide) and in crystals, whereas the second, cyclo (Gly1-Pro2-D-Phe3-Gly4-Val5), is much more flexible and adopts different conformations in the crystal and in solution. Both of these peptides are solubilized by SDS micelles, and nmr relaxation rates indicate that they are both partially immobilized by interaction with the micelles. Furthermore, some amide protons in both peptides participate in hydrogen bonds with water. In the presence of micelles, the former peptide retains a conformation essentially the same as that found in crystals and in solution, which consists of a beta turn and an inverse gamma turn. However, the micellar environment has a significant effect on the latter peptide. In particular, the population of a conformer containing a cis Gly-Pro peptide bond is increased significantly. The most likely conformation of the cis isomer, determined by a combination of nmr and restrained molecular dynamics, contains a Gly1-Pro2 delta turn and a gamma turn about D-Phe3. The nmr data on the trans isomer indicate that this isomer is averaging between two conformations that differ mainly in the orientation of the D-Phe3-Gly4 peptide bond.     

Evidence for a gamma-turn motif in antifreeze glycopeptides.

Knowledge of the secondary structure of antifreeze peptides (AFPs) and glycopeptides (AFGPs) is crucial to understanding the mechanism by which these molecules inhibit ice crystal growth. A polyproline type II helix is perhaps the most widely accepted conformation for active AFGPs; however, random coil and alpha-helix conformations have also been proposed. In this report we present vibrational spectroscopic evidence that the conformation of AFGPs in solution is not random, not alpha-helical, and not polyproline type II. Comparison of AFGP amide vibrational frequencies with those observed and calculated for beta and gamma-turns in other peptides strongly suggests that AFGPs contain substantial turn structure. Computer-generated molecular models were utilized to compare gamma-turn, beta-turn, and polyproline II structures. The gamma-turn motif is consistent with observed amide frequencies and results in a molecule with planar symmetry with respect to the disaccharides. This intriguing conformation may provide new insight into the unusual properties of AFGPs.     

A software tool for the prediction of Xaa-Pro peptide bond conformations in proteins based on 13C chemical shift statistics

The chemical shift difference ([¹³C] – [¹³C]) is a reference-independent indicator of the Xaa-Pro peptide bond conformation. Based on a statistical analysis of the ¹³C chemical shifts of 1033 prolines from 304 proteins deposited in the BioMagRes database, a software tool was created to predict the probabilities for cis or trans conformations of Xaa-Pro peptide bonds. Using this approach, the conformation at a given Xaa-Pro bond can be identified in a simple NOE-independent way immediately after obtaining its NMR resonance assignments. This will allow subsequent structure calculations to be initiated using the correct polypeptide chain conformation.     

Backbone modifications in cyclic peptides. Conformational analysis of a cyclic pseudopentapeptide containing a thiomethylene ether amide bond replacement

NMR and X-ray crystallographic studies have shown that cyclic pentapeptides of the general structure cyclo(D-Xxx-Pro-Gly-Pro-Gly) possess beta- and gamma-turn intramolecular hydrogen bonds. As part of our continuing series surveying the compatibility of various amide bond replacements on peptide structure, we have synthesized cyclo(D-Phe-Pro psi[CH2S]Gly-Pro-Gly). The pseudopeptide was prepared by solid phase methods and cleaved from the resin by a new procedure involving phase transfer catalysis using K2CO3 and tetrabutylammonium hydrogen sulfate. Cyclization was carried out with the use of DPPA, HOBt, and DMAP to afford the product in 69% yield. The conformational behavior of the pseudopeptide was analyzed by 1H and 13C (1D and 2D) NMR techniques. The backbone modification replaced the amide bond that is involved in a gamma-turn intramolecular hydrogen bond in the all-amide structure. In CDCl3, the pseudopeptide adopted the same all-trans conformation as its parent, although the remaining beta-turn hydrogen bond was weaker according to delta delta/delta TNH measurements. In DMSO-d6, the all-trans conformer and a second conformer were observed in a ratio of 55:45. These conformers, which slowly interconverted on the NMR time scale, could be separately assigned; peaks due to chemical exchange were readily distinguishable by the ROESY technique as reported earlier by others. 13C and ROESY experiments suggested the minor conformer contained one cis amide bond at the Gly1-Pro2 position. Thus, both the location and type of amide surrogate are important determinants affecting the compatibility of the replacement with a particular conformational feature.     

Synthetic and conformational studies on dehydroalanine-containing model peptides

Three model dipeptides containing a dehydroalanine residue (delta Ala) at the C-terminal, Boc-X-delta Ala-NHCH3 [X = Ala, Val, and Phe,] have been synthesized and their solution conformations investigated by 1H-NMR, IR, and CD spectroscopy. NMR studies on these peptides in CDCl3 clearly indicate that the NH group of dehydroalanine is involved in an intramolecular hydrogen bond. This conclusion is supported by IR studies also. Nuclear Overhauser effect (NOE) studies are also accommodative of an inverse gamma-turn-type of conformation that is characterized by conformational angles of phi approximately -70 degrees and psi approximately +70 degrees around the X residue, and a C alpha i + 1 H-Ni + 2H interproton distance of 2.5 A. It appears that unlike dehydrophenylalanine or dehydroleucine, which tend to stabilize beta-turn type of structures occupying the i + 2 position of the turn, dehydroalanine favors the formation of an inverse gamma-turn, centered at the preceding L-residue in such solvents as CDCl3 and (CD3)2SO. A comparison of solution conformation of Boc Val-delta Ala-NHCH3 with the corresponding saturated analogue, Boc-Val-Ala-NHCH3, is also presented and shows that dehydroalanine is responsible for inducing the turn structure. It may be possible to design peptides with different preferred conformations using the suitable dehydroamino acid.     

Conformation-activity relationship of peptide T and new pseudocyclic hexapeptide analogs.

Peptide T (ASTTTNYT), a segment corresponding to residues 185-192 of gp120, the coat protein of HIV, has several important biological properties in vitro that have stimulated the search for simpler and possibly more active analogs. We have previously shown that pseudocyclic hexapeptide analogs containing the central residues of peptide T retain considerable chemotactic activity. We have now extended the design of this type of analogs to peptides containing different aromatic residues and/or Ser in lieu of Thr. The complex conformation-activity relationship of these analogs called for a reexamination of the basic conformational tendencies of peptide T itself. Here, we present an exhaustive NMR conformational study of peptide T in different media. Peptide T assumes a gamma-turn in aqueous mixtures of ethylene glycol, a type-IV beta-turn conformation in aqueous mixtures of DMF, and a type-II beta-turn conformation in aqueous mixtures of DMSO. The preferred conformations for the analogs were derived from modeling, starting from the preferred conformations of peptide T. The best models derived from the gamma-turn conformation of peptide T are those of peptides XII (DSNYSR), XIII (ETNYTK) and XVI (ESNYSR). The best models derived from the type-IV beta-turn conformation of peptide T are those of peptides XIV (KTTNYE) and XV (DSSNYR). No low-energy models could be derived starting from the type-II beta-turn conformation of peptide T. The analogs with the most favored conformations are also the most active in the chemotactic test.     

Role of peptide backbone conformation on biological activity of chemotactic peptides

To investigate the role of peptide backbone conformation on the biological activity of chemotactic peptides, we synthesized a unique analog of N-formyl-Met-Leu-Phe-OH incorporating the C alpha,alpha disubstituted residue, dipropylglycine (Dpg) in place of Leu. The conformation of the stereochemically constrained Dpg analog was examined in the crystalline state by x-ray diffraction and in solution using NMR, IR, and CD methods. The secretagogue activity of the peptide on human neutrophils was determined and compared with that of a stereochemically constrained, folded type II beta-turn analog incorporating 1-aminocyclohexanecarboxylic acid (Ac6c) at position 2 (f-Met-Ac6c-Phe-OMe), the parent peptide (f-Met-Leu-Phe-OH) and its methyl ester derivative (f-Met-Leu-Phe-OMe). In the solid state, the Dpg analog adopts an extended beta-sheet-like structure with an intramolecular hydrogen bond between the NH and CO groups of the Dpg residue, thereby forming a fully extended (C5) conformation at position 2. The phi and psi values for Met and Phe residues are significantly lower than the values expected for an ideal antiparallel beta conformation causing a twist in the extended backbone both at the N and C termini. Nuclear magnetic resonance studies suggest the presence of a significant population of the peptide molecules in an extended antiparallel beta conformation and the involvement of Dpg NH in a C5 intramolecular hydrogen bond in solutions of deuterated chloroform and deuterated dimethyl sulfoxide. IR studies provide evidence for the presence of an intramolecular hydrogen bond in the molecule and the antiparallel extended conformation in chloroform solution. CD spectra in methanol, trifluoroethanol, and trimethyl phosphate indicate that the Dpg peptide shows slight conformational flexibility, whereas the folded Ac6c analog is quite rigid. The extended Dpg peptide consistently shows the highest activity in human peripheral blood neutrophils, being approximately 8 and 16 times more active than the parent peptide and the folded Ac6c analog, respectively. However, the finding that all four peptides have ED50 (the molar concentration of peptide to induce half-maximal enzyme release) values in the 10(-8)-10(-9) M range suggests that an induced fit mechanism may indeed be important in this ligand-receptor interaction. Moreover, it is also possible that alterations in the backbone conformation at the tripeptide level may not significantly alter the side chain topography and/or the accessibility of key functional groups important for interaction with the receptor.     

Depsipeptide analogues of elastin repeating sequences: conformational analysis

In this work the effect of elimination of a specific hydrogen bond on the conformation of the repeating peptides of elastin was studied. These repeating sequences are the pentapeptide Val-Pro-Gly-Val-Gly and the hexapeptide Val-Ala-Pro-Gly-Val-Gly. These sequences have been proposed to occur in a beta-turn conformation with a hydrogen bond involving the amide NH of the internal valine residue and the carbonyl oxygen of the residue preceding proline. In the depsipeptide analogues studied in this work, this 4-1 beta-turn hydrogen bond cannot occur. We studied the depsipeptide sequences Val-Pro-Gly-Hiv-Gly and Val-Ala-Pro-Gly-Hiv-Gly (Hiv denotes S-alpha-hydroxyisovaleric acid, the hydroxy acid analogue of valine), as well as the peptide sequences Val-Pro-Gly-Val-Gly and Val-Ala-Pro-Gly-Val-Gly. Compounds studied included sequences with the Boc and benzyl ester protecting groups, derivatives with the acetyl and N-methylamide end groups and polymers of the above sequences. Our conclusions are based on a comparison of depsipeptides with analogous peptides. Conformational analysis was carried out by nmr, CD, and ir spectroscopy. We propose that in the repeating sequences of elastin an equilibrium exists between a gamma-turn structure and a beta-turn structure in the Pro-Gly segment resulting in a structure that combines flexibility with strong conformational preferences. The C7 involves the amide NH of the internal glycine and the carbonyl oxygen of the residue preceding proline. In the N-methylamide derivatives a similar equilibrium exists in the Gly-Val-Gly segment. In the depsipeptides the beta-turn cannot occur and only the gamma-turn is seen. In the polydepsipeptides the major conformational feature is a type I beta-turn involving Gly5 NH and Pro CO.     

13C multiplet nuclear magnetic resonance relaxation-derived ring puckering and backbone dynamics in proline-containing glycine-based peptides.

13CH2-multiplet nuclear magnetic resonance relaxation studies on proline (P)-containing glycine (G)-based peptides, GP, PG, GPG, PGG, and GPGG, provided numerous dipolar auto- and cross-correlation times for various motional model analyses of backbone and proline-ring bond rotations. Molecular dynamics simulations and bond rotation energy profiles were calculated to assess which motions could contribute most to observed relaxation phenomena. Results indicate that proline restricts backbone psi 1, psi 2, and phi 2 motions by 50% relative to those found for a polyglycine control peptide. psi 1 rotations are more restricted in the trans-proline isomer state than in the cis form. A two-state jump model best approximates proline ring puckering which in water could occur either by the C gamma endo-exo or by the C2 interconversion mechanism. The temperature dependence (5 degrees to 75 degrees C) of C beta, and C gamma, and C delta angular changes is rather flat, suggesting a near zero enthalpic contribution to the ring puckering process. In lower dielectric solvents, dimethylsulfoxide and methanol, which may mimic the hydrophobic environment within a protein, the endo-exo mechanism is preferred.     

Solution conformations of two flexible cyclic pentapeptides: cyclo(Gly-Pro-D-Phe-Gly-Ala) and cyclo(Gly-Pro-D-Phe-Gly-Val).

In an effort to explore the residue preferences in three-residue reverse turns (so-called gamma-turns), two cyclic pentapeptides--cyclo(Gly1-Pro2-D-Phe3-Gly4-Ala5) (I) and cyclo(Gly1-Pro2-D-Phe3-Gly4-Val5) (II)--have been synthesized and analyzed by nmr. It was anticipated that the Gly-Pro-D-Phe-Gly portions of these molecules would favor a beta-turn conformation, leaving the remainder of the molecule to adopt a gamma turn, as seen in several previously studied model cyclic pentapeptides. The nmr data for both peptides in CDCl3 (5% DMSO-d6) and in neat DMSO-d6 indicate that the most populated conformation contains a distorted beta turn around Pro2-D-Phe3, which includes a gamma turn around D-Phe3. The distortion in the beta turn does not impede the formation of an inverse gamma turn around residue 5, and indeed, this conformation is observed in both peptides. Both the alanine and the bulkier valine residues are therefore found to be compatible with an inverse gamma turn. Molecular dynamics simulations on the title peptides are reported in the following paper. These simulations indicate that there is conformational flexibility around the D-Phe3-Gly4 peptide bond, which enables the formation of the gamma turn around D-Phe3. The third paper in this series explores the impact of a micellar environment on conformational equilibria in II.     

High and intermediate affinity calmodulin binding domains of the alpha and beta subunits of phosphorylase kinase and their potential role in phosphorylation-dependent activation of the holoenzyme.

Phosphorylase kinase is a calcium-regulated multimeric enzyme of composition (alpha beta gamma delta)4, which contains calmodulin as the integral delta subunit and also is activated further by addition of extrinsic calmodulin. Previous studies by Dasgupta, M., Honeycutt, T., and Blumenthal, D.K. ((1989) J. Biol. Chem. 264, 17156-17163) have identified gamma 302-326 and gamma 342-366 as two calmodulin binding regions. Using peptides that were synthesized based on alpha and beta primary structure and that were predicted to contain the basic amphiphilic alpha-helix motif thought important for calmodulin binding, four additional potential calmodulin binding domains have now been identified: one of high affinity, beta 770-794; two of intermediate affinity, beta 5-28 and beta 920-946; and one with marginally low affinity, alpha 1070-1093. Peptide beta 770-794 was of higher calmodulin affinity than either gamma 302-326 or gamma 342-366; it was of higher affinity than the model synthetic peptide IV defined by O'Neil, K.T., and DeGrado, W.F. ((1990) Trends Biochem. Sci. 15, 59-64); and it is currently the most potent calmodulin-binding peptide so far described. Correlated with their affinity for calmodulin, all six phosphorylase kinase-derived peptides and several other established calmodulin-binding peptides inhibited phosphorylase kinase previously activated by cAMP-dependent phosphorylation, reducing its activity to the level of the nonactivated enzyme. However, these peptides did not inhibit (and some peptides slightly activated) the nonphosphorylated enzyme. Even in the presence of these peptides both activated and nonactivated enzyme remained fully Ca(2+)-dependent. The beta 770-794 peptide has at least a 5-fold greater calmodulin binding affinity than the holo-phosphorylase kinase. This, and its higher affinity for calmodulin than either of the sites on the gamma subunit, raises the possibility that in the native enzyme it may be involved in binding the intrinsic delta subunit. Further, inhibition of activated but not nonactivated enzyme by calmodulin-binding peptides would suggest that the phosphorylation-dependent activation of phosphorylase kinase may be mediated by changes in the binding interactions of the intrinsic calmodulin delta subunit.     

Statistical and energetic analysis of side-chain conformations in oligopeptides

The distributions of side-chain conformations in 258 crystal structures of oligopeptides have been analyzed. The sample contains 321 residues having side chains that extend beyond the C beta atom. Statistically observed preferences of side-chain dihedral angles are summarized and correlated with stereochemical and energetic constraints. The distributions are compared with observed distributions in proteins of known X-ray structures and with computed minimum-energy conformations of amino acid derivatives. The distributions are similar in all three sets of data, and they appear to be governed primarily by intraresidue interactions. In side chains with no beta-branching, the most important interactions that determine chi 1 are those between the C gamma H2 group and atoms of the neighboring peptide groups. As a result, the g- conformation (chi 1 congruent to -60 degrees) occurs most frequently for rotation around the C alpha-C beta bond in oligopeptides, followed by the t conformation (chi 1 congruent to 180 degrees), while the g+ conformation (chi 1 congruent to 60 degrees) is least favored. In residues with beta-branching, steric repulsions between the C gamma H2 or C gamma H3 groups and backbone atoms govern the distribution of chi 1. The extended (t) conformation is highly favored for rotation around the C beta-C gamma and C gamma-C delta bonds in unbranched side chains, because the t conformer has a lower energy than the g+ and g- conformers in hydrocarbon chains. This study of the observed side-chain conformations has led to a refinement of one of the energy parameters used in empirical conformational energy computations.     

Backbone side chain interactions in peptides. I. Crystal structures of model dipeptides with the Pro-Ser sequence

The preferential occurrence of amino-acid residues having short polar side-chain within beta-folded regions of crystallized proteins suggests the existence of some stabilizing interaction involving the side polar function. Three model dipeptides tBuCO-L-Pro-L-Ser-NHMe 1, tBuCO-L-Pro-D-Ser-NHMe 2 in the pure enantiomeric a and racemic b forms, and iPrCO-L-Pro-D-Ser-OMe 3 have been investigated in the solid state by X-ray crystallography. Homo and heterochiral sequences 1 and 2 are folded in the beta I and beta II types, respectively, whereas 3 obviously accommodates an open conformation. Besides the i + 3 leads to i hydrogen bond typical of beta-bends in 1, 2a, and 2b, the Ser NH group in all four crystal structures is a proton donor to the lone orbitals of the Ser O gamma oxygen atom. The result is that the disposition of the Ser C alpha--C beta bond corresponds to the rotamer III (chi 1 congruent to 60 degrees). As shown by the crystal structure of 3, the intra-Ser NH. . .O gamma hydrogen bonding is not restricted to beta-folded Pro-Ser sequences. Therefore, this interaction is not only a stabilizing factor for beta-turns but it is also probably responsible for the already mentioned stability of rotamer III for the Ser C alpha--C beta bond in peptides and protein.     

Switching of turn conformation in an aspartate anion peptide fragment by NH . . . O- hydrogen bonds

Aspartic acid protease model peptides Z-Phe-Asp(COOH)-Thr-Gly-Ser-Ala-NHCy (1) and AdCO-Asp(COOH)-Val-Gly-NHBzl (3), and their aspartate anions (NEt4)[Z-Phe-Asp(COO-)-Thr-Gly-Ser-Ala-NHCy] (2) and (NEt4)[AdCO-Asp(COO-)-Val-Gly-NHBzl] (4), having an invariant primary sequence of the Asp-X(Thr,Ser)-Gly fragment, were synthesized and characterized by 1H-NMR, CD, and infrared (IR) spectroscopies. NMR structure analyses indicate that the Asp O(delta) atoms of the aspartate peptide 2 are intramolecularly hydrogen-bonded with Gly, Ser, Ala NH, and Ser OH, supporting the rigid beta-turn-like conformation in acetonitrile solution. The tripeptide in the aspartic acid 3 forms an inverse gamma-turn structure, which is converted to a beta-turn-like conformation because of the formation of the intramolecular NH . . . O- hydrogen bonds with the Asp O(delta) in 4. Such a conformational change is not detected between dipeptides AdCO-Asp(COOH)-Va-NHAd (5) and (NEt4)[AdCO-Asp(COO-)-Val-NHAd] (6). The pK(a) value of side-chain carboxylic acid (5.0) for 3 exhibits a lower shift (0.3 unit) from that of 5 in aqueous polyethyleneglycol lauryl ether micellar solution. NMR structure analyses for 3 in an aqueous micellar solution indicate that the preorganized turn structure, which readily forms the NH . . . O- hydrogen bonds, lowers the pK(a) value and that resulting hydrogen bonds stabilize the rigid conformation in the aspartate anion state. We found that the formation of the NH . . . O- hydrogen bonds involved in the hairpin turn is correlated with the protonation and deprotonation state of the Asp side chain in the conserved amino acid fragments.     

Solution structure of a D,L-alternating oligonorleucine as a model of double-stranded antiparallel beta-helix

Conformational characteristics of alternating D,L linear peptides are of particular interest because of their capacity to form transmembrane channels with different transport properties, as some natural antibiotics do. Single- and double-stranded beta-helical structures are common for alternating D,L peptides. The stability of the beta-helix depends on several structural factors, such as the backbone peptide length, type and position of side chains, and nature of terminal groups. The NMR and molecular dynamics solution conformation of a synthetic alternating D,L-oligopeptide with 15 norleucines (XVMe) has been used as a model to get insight in to the conformational features of double-stranded beta-helix structures. The NH chemical shift values (delta(NH)) and long-range nuclear Overhauser effects (NOE) cross peaks, in particular interstrand connectivities, clearly point to an antiparallel double-stranded beta-helix for the XVMe major conformation in solution. An extensive set of distances (from NOE cross peaks) and H-bonds (from delta(NH)) has been included in the molecular dynamics calculations. The experimental NMR data and theoretical calculations clearly indicate that the most probable conformation of XVMe in solution is a double-strand antiparallel beta(5.6) increasing decreasing-helix structure.     

Crystal structure of tert.-butyloxycarbonyl-L-prolyl-D-alanyl-D-alanyl-N-methylamide. Dimeric beta-sheet formation.

The crystal structure of the tripeptide t-Boc-L-Pro-D-Ala-D-Ala-NHCH3, monohydrate, (C17H30N4O5.H2O, molecular weight = 404.44) has been determined by single crystal X-ray diffraction. The crystals are monoclinic, space group P2(1), a = 9.2585(4), b = 9.3541(5), c = 12.4529(4)A, beta = 96.449(3) degrees, Z = 2. The peptide units are in the trans and the tBoc-Pro bond in the cis orientation. The first and third peptide units show significant deviations from planarity (delta omega = 5.2 degrees and delta omega = 3.7 degrees, respectively). The backbone torsion angles are: phi 1 = -60 degrees, psi 1 = 143.3 degrees, omega 1 = -174.8 degrees, phi 2 = 148.4 degrees, psi 2 = -143.1 degrees, omega 2 = -179.7 degrees, phi 3 = 151.4 degrees, psi 3 = -151.9 degrees, omega 3 = -176.3 degrees. The pyrrolidine ring of the proline residue adopts the C2-C gamma conformation. The molecular packing gives rise to an antiparallel beta-sheet structure formed of dimeric repeating units of the peptide. The surface of the dimeric beta-sheet is hydrophobic. Water molecules are found systematically at the edges of the sheets interacting with the urethane oxygen and terminal amino groups. Surface catalysis of an L-Ala to D-Ala epimerization process by water molecules adsorbed on to an incipient beta-sheet is suggested as a mechanism whereby crystals of the title peptide were obtained from a solution of tBoc-Pro-D-Ala-Ala-NHCH3.     

Synthesis, crystal structure, and molecular conformation of peptide N-Boc-L-Pro-dehydro-Phe-L-Gly-OH

The peptide N-Boc-L-Pro-dehydro-Phe-L-Gly-OH was synthesized by the usual workup procedure and finally coupling the N-Boc-L-Pro-dehydro-Phe to glycine. The peptide crystallizes in monoclinic space group P2(1) with a = 8.951(4) A, b = 5.677(6) A, c = 21.192(11) A, beta = 96.97(4) degrees, V = 1069(1) A3, Z = 2, dm = 1.295(5) Mgm-3, and dc = 1.297(4) Mgm-3. The structure was determined by direct methods using SHELXS86. The structure was refined by the block-diagonal least-squares procedure to an R value of 0.074 for 1002 observed reflections. The C alpha 2-C beta 2 distance of 1.33(2) A is an appropriate double bond length. The angle C alpha 2-C beta 2-C gamma 2 is 133(1) degrees. The peptide backbone torsion angles are theta 1 = -167(1) degrees, omega 0 = 179(1) degrees, phi 1 = -48(1) degrees, psi 1 = 137(1) degrees, omega 1 = 175(1) degrees, phi 2 = 65(2) degrees, psi 2 = 15(2) degrees, omega 2 = -179(1) degrees, and phi 3 = -166(1) degrees. These values show that the Boc group has a trans-trans conformation while the peptide backbone adopts a beta-turn II conformation, which is stabilized by an intramolecular hydrogen bond of length of 3.05(1) A. The structures of dehydro-Phe containing peptides suggest that the dehydro-Phe promotes the beta-turn II conformation. The five-membered pyrrolidine ring of the Pro residue adopts an ideal C gamma-exo conformation with torsion angles chi 1(1) = -24(1) degrees, chi 2(1) = 34(1) degrees, chi 3(1) = -30(1) degrees, chi 4(1) = 15(1) degrees, and theta 0(1) = 6(1) degrees. The side-chain torsion angles in dehydro-Phe are chi 1(2) = -1(2) degrees, chi 2,1(2) = -176(1) degrees, and chi 2,2(2) = 8(2) degrees. The plane of C alpha 2-C beta 2-C gamma 2 is rotated with respect to the plane of the phenyl ring at 7(1) degrees, which indicates that the atoms of the side chain of dehydro-Phe are essentially coplanar. The molecules form a 2(1) screw axis related hydrogen-bonded rows along the b axis.