Vibrational circular dichroism as a probe of solid‐state organisation of derivatives of cyclic β‐amino acids: Cis‐ and trans‐2‐aminocyclobutane‐1‐carboxylic acid

Peptide models built from cis‐ and trans‐2‐aminocyclobutane‐1‐carboxylic acids (ACBCs) are studied in the solid phase by combining Fourier‐transform infrared spectroscopy (FTIR) absorption spectroscopy, vibrational circular dichroism (VCD), and quantum chemical calculations using density functional theory (DFT). The studied systems are N‐tert‐butyloxycarbonyl (Boc) derivatives of 2‐aminocyclobutanecarboxylic acid (ACBC) benzylamides, namely Boc?(cis‐ACBC)?NH?Bn and Boc?(trans‐ACBC)?NH?Bn. These two diastereomers show very different VCD signatures and intensities, which of the trans‐ACBC derivative being one order of magnitude larger in the region of the ν (CO) stretch. The spectral signature of the cis‐ACBC derivative is satisfactorily reproduced by that of the monomer extracted from the solid‐state geometry of related ACBC derivatives, which shows that no long‐range effects are implicated for this system. In terms of hydrogen bonds, the geometry of this monomer is intermediate between the C6 and C8 structures (exhibiting a 6‐ or 8‐membered cyclic NH?O hydrogen bond) previously evidenced in the gas phase. The benzyl group must be in an extended geometry to reproduce satisfactorily the shape of the VCD spectrum in the ν (CO) range, which qualifies VCD as a potential probe of dispersion interaction. In contrast, reproducing the IR and VCD spectrum of the trans‐ACBC derivative requires clusters larger than four units, exhibiting strong intermolecular H‐bonding patterns. A qualitative agreement is obtained for a tetramer, although the intensity enhancement is not reproduced. These results underline the sensitivity of VCD to the long‐range organisation in the crystal.     

Vibrational circular dichroism spectra of three conformationally distinct states and an unordered state of poly(L-lysine) in deuterated aqueous solution

Fourier transform ir vibrational circular dichroism (VCD) spectra in the amide I′ region of poly(L-lysine) in D₂O solutions have confirmed the existence of three distinct conformational states and an unordered conformational state in this homopolypeptide. Characteristic VCD spectra are presented for the right-handed α-helix, the antiparallel β-sheet, an extended helix conformation previously referred to as the so-called “random coil,” and a completely unordered conformation characterized by the absence of any amide I′ VCD. VCD for the antiparallel β-sheet in solution and the unordered chain conformation are presented for the first time. Each of the four different VCD spectra is unique in appearance and lends weight to the view that VCD has the potential to become a sensitive new probe of the secondary structure of proteins in solution.     

Comparison of mid-infrared Fourier transform vibrational circular dichroism measurements with single and dual polarization modulations

Fourier transform infrared vibrational circular dichroism (FTIR-VCD) measurements have gone through major advances in the last decade. A major thrust in these advances was to find ways that can minimize the VCD spectral artifacts and obtain the VCD signals at enhanced signal quality. However, all these advances are not incorporated in FTIR-VCD instruments manufactured by some commercial manufacturers. In this article, we compare the measurements obtained with single and dual polarization modulations to seek the attention of the users of single polarization modulation method in minimizing the artifacts in such measurements. We also report that the VCD spectrum of a home-made collagen film can serve as a simple and convenient sample for routine verification of the correct functioning of the VCD spectrometers.     

Vibrational CD of polypeptides. XII. Reevaluation of the Fourier transform vibrational CD of poly(gamma-benzyl-L-glutamate)

Using a newly constructed Fourier transform ir (FTIR) based vibrational CD (VCD) instrument, we have found that elimination of the ellipsoidal collection mirror before the detector and its replacement by a lens leads to a significant improvement in the absorption artifact problem often seen previously in FTIR-VCD. Reduction in artifact level brings the FTIR-VCD band shape of the amide 1 band in poly(γ-benzyl-L -glutamate) into better agreement with that found with dispersive instruments. These results indicate that the difference between the spectra obtained with the two methods is not primarily a factor of resolution but is more dependent on artifact level. Thus the previously reported deconvolution of the amide I VCD results and their subsequent interpretation in terms of the helical vs. exciton mechanisms overemphasize weak features in the spectrum. Results based on deconvolution of the absorption spectrum remain valid. Further new data on the amide II and several lower energy transitions that encompass the amide III region show broad single-signed features—but of the opposite sense—in the two regions, implying that their VCD arises through mutual coupling.     

Grayscale representation of infrared microscopy images by extended multiplicative signal correction for registration with histological images

Fourier‐transform infrared (FTIR) microspectroscopy is rounding the corner to become a label‐free routine method for cancer diagnosis. In order to build infrared‐spectral based classifiers, infrared images need to be registered with Hematoxylin and Eosin (H&E) stained histological images. While FTIR images have a deep spectral domain with thousands of channels carrying chemical and scatter information, the H&E images have only three color channels for each pixel and carry mainly morphological information. Therefore, image representations of infrared images are needed that match the morphological information in H&E images. In this paper, we propose a novel approach for representation of FTIR images based on extended multiplicative signal correction highlighting morphological features that showed to correlate well with morphological information in H&E images. Based on the obtained representations, we developed a strategy for global‐to‐local image registration for FTIR images and H&E stained histological images of parallel tissue sections.     

Optical spectroscopic differentiation of various equilibrium denatured states of horse cytochrome c

Thermal unfolding of cytochrome c (cyt c) from several states has been studied using equilibrium spectroscopic techniques. CD in the uv, vibrational circular dichroism, infrared, and uv-vis absorption spectra measured at various temperatures, pHs, salt concentrations, and GuHCl concentrations are used to show the conformational as well as heme structural differences between native and various denatured states. The difference in thermal denaturation behaviors of cyt c starting from acid denatured, molten globule (MG), and the A and native states are explored. Different final high temperature states were observed for cytochrome c unfolding from four different initial states (native, MG, A, and acid denatured state) by electronic CD, Fourier transform infrared (FTIR), and vibrational CD (VCD). Consistent with this, different thermal unfolding pathways for the MG and A states are suggested by the FTIR and VCD data for this process.     

Discriminating 3(10)- from alpha-helices: vibrational and electronic CD and IR absorption study of related Aib-containing oligopeptides

Model peptides based on -(Aib-Ala)(n)-, and (Aib)(n)-Leu-(Aib)(2) sequences, which have varying amounts of 3(10)-helical character, were studied by use of vibrational and electronic circular dichroism (VCD and ECD) and Fourier transform infrared (FTIR) absorption spectroscopies to test the correlation of spectral response and conformation. The data indicate that these peptides, starting from a length of about four to six residues, predominantly adopt a 3(10)-helical conformation at room temperature. The longest model peptides, depending on the series, may evidence some alpha-helical contribution to the spectra, while the shorter ones, with less than six residues, have much less order. The IR absorption spectra (as supported by theory) showed only small frequency changes between 3(10)- and alpha-helices. By contrast, solvent effects are a source of much bigger perturbations. The ECD results show that the intensity ratio for the approximately 222-nm to approximately 208-nm bands, while useful for distinguishing between these two helical types in some sequences, may have a narrower range of application than VCD. However, the VCD data presented here continue to support the proposed discrimination between alpha- and 3(10)-helices based on qualitative amide I and II bandshape differences. The present study shows the intensities of the 3(10)-helical amide I (peak-to-peak) to its amide II VCD to be of the same order and useful for discriminating them from alpha-helices, whose amide I dominates the amide II in intensity. This qualitative result is experimentally independent of the amount of alphaMe-substituted residues in the sequence. These experimental VCD results are consistent in detail with theoretical spectral simulations for Ac-(Ala)(8)-NH(2), Ac-(Aib-Ala)(4)-NH(2), and Ac-(Aib)(8)-NH(2) in 3(10)- and alpha-helical conformations.     

Conformational transitions in phosvitin with pH variation. Vibrational circular dichroism study

The vibrational circular dichroism (VCD) spectra of metal-free phosvitin are presented as a function of pH and analyzed both qualitatively and by using a factor analysis approach referenced to a protein data set. The qualitative pattern of both the IR and VCD changes is consistent with a coil-to-sheet transition occurring as pH is progressively decreased to values lower than 3. A similar transition was seen in commercial preparation of phosvitin which still contained metal ions, but there the transition was more gradual and occurred at somewhat different pH values. Such a gradual change is also evident in the solution phase absorption band profile but is made clearer using Fourier deconvolution. Based on VCD results, the low pH transition appears to occur with two distinct manifestations of the beta-sheet form. However, at the lowest pH values the sample may precipitate. These two forms are not distinguishable with Fourier transform infrared alone and may be due to a twist of the beta-sheet form or to aggregation.     

Frequency analysis of infrared absorption and vibrational circular dichroism of proteins in D2O solution.

The IR absorption frequencies as derived from second derivatives of the Fourier transform IR spectra of the amide I' bands of globular proteins in D2O are compared to those obtained from band fitting of the vibrational circular dichroism (VCD) spectra. The two sets of frequencies are in very good agreement, yielding consistent ranges where amide I' VCD and IR features occur. Use of VCD to complement the IR allows one to add sign information to the frequency information so that features occurring in the overlapping frequency ranges that might arise from different secondary structures can be better discriminated. From this comparison, it is clear that correlation just of the frequency of a given IR transition to secondary structure can lead to a nonunique solution. Different sign patterns were identified for correlated groups of globular proteins in restricted frequency ranges that have been previously assigned to defined secondary structural elements. Hence, different secondary structural elements must contribute band components to a given frequency range.     

Absolute configuration assignment of (+)‐fluralaner using vibrational circular dichroism

The absolute configurations of the separated enantiomers of fluralaner, a racemic animal health product used to prevent fleas and ticks, have been assigned using vibrational circular dichroism (VCD). The crystallographic structure of the active enantiomer (+)‐fluralaner has previously been shown to have the (S ) configuration using small molecule crystallography. We sought a faster analytical method to determine the absolute configuration of the separated enantiomers. When comparing the measured IR (infrared) and VCD spectra, it is apparent that the amide carbonyl groups appear in the IR but are nearly absent in the VCD. Computational work to calculate the VCD and IR using in vacuo models, implicit solvation, and explicitly solvated complexes has implicated conformational averaging of the carbonyl VCD intensities.     

Synthesis of alginate‐silica hybrid hydrogel for biocatalytic conversion by β‐glucosidase in microreactor

The organic–inorganic hybrid materials have been used in different fields to immobilize biomolecules since they offer many advantages. The aim of this study was to optimize and characterize the alginate‐silica hybrid hydrogel as a stable and injectable form for microfluidic systems using internal gelation method and increase the stability and activity of immobilized enzyme for biocatalytic conversions as well. Characterization was carried out by scanning electron microscopy, energy dispersive spectroscopy/mapping, Brunauer–Emmett–Teller, Barrett–Joyner–Halenda, and Fourier‐transform infrared spectroscopy analyses, and the shrinkages of monoliths were evaluated. Subsequent to optimizing the enzyme concentration (40 μg), hydrolytic conversion of 4‐nitrophenyl β‐d ‐glucopyranoside (pNPG) was performed to understand the behavior of the bioconversion in the microfluidic system. The yield was 94% which reached the equilibrium at 24 h indicating that the alginate‐silica gel derived microsystem overcome some drawbacks of monolithic systems. Additionally, bioconversion of Ruscus aculeatus saponins was carried out at the same setup in order to obtain aglycon part, which has pharmaceutical significance. Although pure aglycon could not be achieved, an intermediate compound was obtained based on the HPLC analysis. The developed formulation can be utilized for various life science applications.     

Vibrational circular dichroism of carbohydrate films formed from aqueous solutions

Vibrational circular dichroism (VCD) spectra in the entire 2000-900 cm(-1) region have been recorded, for the first time, for films of carbohydrates prepared from aqueous solutions. Eight different carbohydrates, alpha-D-glucopyranosyl-(1-->4)-D-glucose, cyclomaltohexaose, alpha-D-glucopyranosyl alpha-D-glucopyranoside, beta-D-glucopyranosyl-(1-->6)-D-glucose, beta-D-glucopyranosyl-(1-->4)-D-glucose, D-glucose, and both enantiomers of 6-deoxygalactose and of allose, were investigated. The VCD spectra obtained for films are found to be identical to the corresponding spectra obtained for aqueous solutions of carbohydrates. These measurements demonstrate several advantages of significant importance. The strong infrared absorption of water has prevented, in the past, the pursuit for routine applications of VCD in determining the structures of carbohydrates in aqueous solutions. This limitation is not present for film studies because water solvent is removed in the process of preparing the films. Also, strong infrared absorption of water at 1650 cm(-1) requires the use of very short-pathlength (6 microm) cells for measurements on aqueous solutions. This requirement and concomitant inconveniences (such as laborious assembling of a demountable liquid cell or purchasing an expensive variable pathlength liquid cell) have been eliminated for film measurements. The removal of interfering water absorption in film studies resulted in higher light throughput and better signal-to-noise ratios for VCD measurements. Another point of significance is that the amount of carbohydrate sample required for VCD measurements on films is approximately one to two orders of magnitude smaller than that required for corresponding VCD measurements on aqueous solutions. Since carbohydrate samples can now be studied as films, VCD spectroscopy becomes much more broadly applicable for carbohydrates than previously believed. The present work, in combination with other film measurements in our laboratory, indicate that VCD studies on films can be used more generally, providing a convenient and powerful approach for probing structural information for biologically important compounds.     

Synthesis and characterization of ion‐imprinted resin for selective removal of UO2(II) ions from aqueous medium

In this work, uranyl ion‐imprinted resin based on 2‐(((4‐hydroxyphenyl)amino)methyl)phenol was synthesized by condensation polymerization of its uranyl complex in presence of resorcinol and formaldehyde cross‐linkers. Numerous instrumental techniques including elemental analysis, Fourier transform infrared spectroscopy, ultraviolet, ¹H along with ¹³C nuclear magnetic resonance spectroscopy have been employed for complete characterization of the synthesized ligand and its uranyl complex. Additionally, the obtained ion‐imprinted and non‐imprinted resins were investigated using scanning electron microscope and Fourier transform infrared spectroscopy. The effects of various essential parameters such as pH, temperature and contact time on removal of uranyl ions have been examined, and the results indicated that the obtained resin exhibited the optimum activity at pH 5. Furthermore, the adsorption process was spontaneous at all studied temperatures and followed the second‐order kinetics model. Also, Langmuir adsorption isotherm exhibited the best fit with the experimental results with maximum adsorption capacity 139.3 mg/g. Moreover, the selectivity studies revealed that the ion‐imprinted resin exhibited an obvious affinity toward the uranyl ions in presence of other metal ions compared with the non‐imprinted resin. Copyright © 2015 John Wiley & Sons, Ltd.     

Specific monitoring of aflatoxin M1 in real samples using aptamer binding to DNFS based on turn‐on method: A novel biosensor

In the present work, a novel biocompatible scaffold was fabricated for the DNA aptamer immobilization. For the first time, amino‐functionalized dendritic fibrous nanosilica (KCC‐1‐nPr‐NH₂) and gold nanoparticle supported by chitosan (AuNPs‐CS) were synthesized and electrodeposited successfully on the surface of the glassy carbon electrode by chronoamperometry technique. Unique oligonucleotide of aflatoxin M1 (5′‐ATC CGT CAC ACC TGC TCT GAC GCT GGG GTC GAC CCG GAG AAA TGC ATT CCC CTG TGG TGT TGG CTC CCG TAT) labeled by toluidine blue was immobilization on the prepared interface. Hence, a novel aptamer‐based bioassay was formed for highly sensitive quantitation of AFM1 using cyclic voltammetry and differential plus voltammetry. The structure and morphology of GQDs‐CS/KCC‐1‐nPr‐NH₂ were investigated by Fourier‐transform infrared spectroscopy, X‐ray diffraction, atomic force, scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy. The achieved low limit of quantification of apta‐assay for detection of AFM1 was 10fM. Also, calibration curve was linear from 0.1μM to 10fM in real samples. The proposed apta‐assay has acceptable long‐term stability. Designed aptasensor has a lot of remarkable advantages including excellent selectivity, sensitivity, and stability that could be used as facile bio‐device for the determination of AFM1 in milk samples.     

Structural and luminescent studies of erbium‐doped CaZrO3 green‐emitting nanophosphors

Erbium (Er) (0.5, 1.0 and 1.5 wt%)‐doped CaZrO₃ nanophosphors were synthesized by the sol–gel method using poly(vinyl alcohol) as the chelating agent. Their structural and photoluminescence properties were studied using X‐ray diffraction (XRD), field emission scanning electron microscopy–energy dispersive spectroscopy (FESEM‐EDS), transmission electron microscopy (TEM), photoluminescence and Fourier transform infrared spectroscopy (FTIR). The XRD patterns of the samples confirm that nanoscale crystallite sizes. Agglomeration of the samples was observed using field emission scanning electron microscopy images. Energy dispersive spectroscopy measurements confirmed the existence of Ca, Zr, O and Er in the samples. Average particle sizes for the samples were calculated from transmission electron microscopy images. FTIR spectra clearly show characteristic absorption bands related to the metal oxides, as well as some other organic molecules. The photoluminescence spectra show bands in the green region. The Commission International de l'Eclairage coordinates were calculated and found to be in green region.     

Methods to study protein folding by stopped-flow FT-IR

Stopped-flow mixing coupled with time-resolved Fourier transform infrared (FT-IR) spectroscopy represents a new experimental approach to explore protein folding events, which has become possible only recently with the development of appropriate techniques. Here, we discuss experimental apparatus that are capable of initiating and monitoring protein folding processes on the millisecond to minute timescale. The strongest point of the FT-IR approach as a structure-specific probe is that a complete spectrum is available for each time point of measurement. In this way, several spectral windows are accessible simultaneously for the observation of the unfolding or the formation of different secondary structure elements and also events that can be attributed to changes in tertiary structure. One specific advantage of the infrared technique is the ability to monitor directly the kinetics of processes involving beta-sheet structures, which is exceptionally difficult to do with other techniques.     

Feasibility study of using the dispersion of surface acoustic wave impulse for viscoelasticity characterization in tissue mimicking phantoms

The aim of this study was to investigate the feasibility of utilizing the phase velocity dispersion of impulse surface acoustic wave (SAW) for viscoelasticity characterization of soft materials. The focused ultrasound transducer and the phase‐sensitive optical coherence tomography were applied as the impulse SAW inducer and tracker, respectively. Three types of liquid‐paraffin‐based cream‐in‐agar phantoms were tested. Phase velocity dispersion curve was extracted using a Fourier transform‐based phase velocity analysis algorithm. Viscoelastic parameters were obtained by fitting the dispersion curve of SAW into Rayleigh wave dispersion equation. The estimated viscoelasticity was compared with that from spherical indenter, ramp‐hold relaxation testing for validation. Both results show an increasing trend in the elasticity and decreasing trend in the viscosity with the concentration of liquid‐paraffin‐based cream increasing in the samples. The proposed method has the capability of evaluating the viscoelastic properties of homogeneous soft tissue. By combining viscoelastic parameters estimated from the proposed method, the dispersive SAW‐impulse‐based viscosity‐compensated elastography could be further developed.      

Intra- and interspecific variation of cuticular hydrocarbon composition in two Ectatomma species (Hymenoptera: Formicidae) based on Fourier transform infrared photoacoustic spectroscopy

We have been able to discriminate different castes and sexes of ants in the same colony by measuring cuticular hydrocarbon levels with Fourier transform infrared photoacoustic spectroscopy, compared by canonical discriminant function analysis. We have now applied this methodology to various colonies of two species of ants of the genus Ectatomma in the Brazilian Cerrado. There were clear interspecific differences in cuticular hydrocarbons of these ants, with a small intraspecific variation. The differences between colonies were greater in E. brunneum than in E. vizottoi. Genetic differences among the colonies and species were well estimated by Fourier transform infrared photoacoustic spectroscopy and statistical analyses.     

Synthesis of cubic ZnS microspheres exhibiting broad visible emission for bioimaging applications

Biocompatible ZnS microspheres with an average diameter of 3.85 µm were grown by solvo‐hydrothermal (S‐H) method using water–acetonitrile–ethylenediamine (EDA) solution combination. ZnS microspheres were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), high‐resolution transmission electron microscopy (HRTEM), Fourier transform (FT)‐Raman spectroscopy and Fourier transform infrared spectroscopy (FTIR) techniques. The broad photoluminescence (PL) emissions from 380–580 nm that were seen from the ZnS microspheres attributed to the increase in carrier concentration, as understood from the observed intense Raman band at 257 cm^–1. Cytotoxicity and haemocompatibility investigations of these ZnS microspheres revealed its biocompatibility. ZnS microspheres, along with biological cell lines, were giving visible light emission and could be used for bioimaging applications. Copyright © 2015 John Wiley & Sons, Ltd.