Acceleration of nucleic acid hybridization rate by polyethylene glycol

The addition of polyethylene glycol to filter-bound nucleic acid hybridization greatly increases the hybridization rate. With single-stranded probes, the increase obtained with polyethylene glycol is significantly greater than that obtained with dextran sulfate. Additionally, polyethylene glycol is easier to manipulate and less expensive than dextran sulfate.     

Nearly instantaneous, cation-independent, high selectivity nucleic acid hybridization to DNA microarrays

Hybridization rate enhancement has been demonstrated for high molecular weight DNA target binding to a microarray. Microarrays were fabricated using biotin-modified oligonucleotides complexed with streptavidin (SA), which serves as an attachment to the underlying surface. It is shown that at low salt and pH 5, where SA develops a positive charge, duplex formation becomes at least 80-fold faster than seen under standard conditions, where SA is neutral or anionic. Duplex formation becomes independent of solution state cation concentration in the low pH state, under conditions where specificity remains high. The utility of such applied surface science is discussed.     

Effect of locked nucleic acid modifications on the thermal stability of noncanonical DNA structure

We studied the kinetic and thermodynamic effects of locked nucleic acid (LNA) modifications on parallel and antiparallel DNA duplexes. The LNA modifications were introduced at cytosine bases of the pyrimidine strand. Kinetic parameters evaluated from melting and annealing curves showed that the association and dissociation rate constants for the formation of the LNA-modified parallel duplex at 25.0 °C were 3 orders of magnitude larger and 6 orders of magnitude smaller, respectively, than that of the unmodified parallel duplex. The activation energy evaluated from the temperature-dependent rate constants was largely altered by the LNA modifications, suggesting that the LNA modifications affected a prenucleation event in the folding process. Moreover, thermodynamic parameters showed that the extent of stabilization by the LNA modification for parallel duplexes (3.6 kcal mol(-1) per one modification) was much more significant than that of antiparallel duplexes (1.6 kcal mol(-1)). This large stabilization was due to the decrease in ΔH° that was more favorable than the decrease in TΔS°. These quantitative parameters demonstrated that LNA modification specifically stabilized the noncanonical parallel duplex. On the basis of these observations, we succeeded to stabilize the parallel duplex by LNA modification at the physiological pH. These results can be useful in the rational design of functional molecules such as more effective antisense and antigene strands, more sensitive strands for detection of target DNA and RNA strands, and molecular switches responding to solution pH.     

Up-converting phosphor reporters for nucleic acid microarrays

An important application of robotically spotted DNA microarrays is the monitoring of RNA expression levels. A clear limitation of this technology is the relatively large amount of RNA that is required per hybridization as a result of low hybridization efficiency and limiting detection sensitivity provided by conventional fluorescent reporters. We have used a recently introduced luminescent reporter technology, called UPT (up-converting phosphor technology). Down-converting phosphors have been applied before to detect nucleic acids on filters using time-resolved fluorometry. The unique feature of the phosphor particles (size 0.4 microm) used here is that they emit visible light when illuminated with infrared (IR) light (980 nm) as a result of a phenomenon called up-conversion. Because neither support material of microarrays nor biomolecules possess up-conversion properties, an enhanced image contrast is expected when these nonfading phosphor particles are applied to detect nucleic acid hybrids on microarrays. Comparison of the UPT reporter to cyanin 5 (Cy5) in a low-complexity model system showed a two order of maginitude linear relationship between phosphor luminescence and target concentration and resulted in an excellent correlation between the two reporter systems for variable target concentrations (R2 = 0.95). However, UPT proved to be superior in sensitivity, even though a wide-field microscope equipped with a xenon lamp was used. This higher sensitivity was demonstrated by complementary DNA (cDNA) microarray hybridizations using cDNAs for housekeeping genes as probes and complex cDNA as target. These results suggest that a UPT reporter technology in combination with a dedicated IR laser array-scanner holds significant promise for various microarray applications.     

质子驱动的核酸纳米机器

i-motif结构是一种特殊的DNA二级结构,它是由四个胞嘧啶重复序列在质子的参与下形成的四链螺旋,该结构只有在酸性环境才能维持,因此可以将其设计成一个质子驱动的纳米级分子机器。本文通过与其它DNA分子机器比较,详述了质子驱动的分子机器的工作机理,评价了该机器的优越性、做功能力,并介绍了其多方面应用。     

DNA probes: applications of the principles of nucleic acid hybridization.

Nucleic acid hybridization with a labeled probe is the only practical way to detect a complementary target sequence in a complex nucleic acid mixture. The first section of this article covers quantitative aspects of nucleic acid hybridization thermodynamics and kinetics. The probes considered are oligonucleotides or polynucleotides, DNA or RNA, single- or double-stranded, and natural or modified, either in the nucleotide bases or in the backbone. The hybridization products are duplexes or triplexes formed with targets in solution or on solid supports. Additional topics include hybridization acceleration and reactions involving branch migration. The second section deals with synthesis or biosynthesis and detection of labeled probes, with a discussion of their sensitivity and specificity limits. Direct labeling is illustrated with radioactive probes. The discussion of indirect labels begins with biotinylated probes as prototypes. Reporter groups considered include radioactive, fluorescent, and chemiluminescent nucleotides, as well as enzymes with colorimetric, fluorescent, and luminescent substrates.     

Detection of Chlamydia trachomatis by nucleic acid sandwich hybridization

Abstract Chromosomal DNA fragments from Chlamydia trachomatis serotype L2 were shotgun-cloned into pBR322. A C. trachomatis -specific clone was further subcloned to produce specific DNA reagents for the identification of C. trachomatis by nucleic acid sandwich hybridization. The chosen DNA reagents from serotype L2 also hybridized with all the other chlamydial serotypes tested, but not with the DNA from 41 unrelated organisms. The sensitivity of the sandwich hybridization test was 10⁶ DNA molecules. The applicability of the test for routine diagnostic use was demonstrated by a pilot study in which C. trachomatis was directly detected from genital specimens.     

DNA hybridization detection on electrical microarrays using coulostatic pulse technique

We demonstrated a novel application of transient coulostatic pulse technique for the detection of label free DNA hybridization on nm-sized gold interdigitated ultramicroelectrode arrays (Au-IDA) made in silicon technology. The array consists of eight different positions with an Au-IDA pair at each position arranged on the Si-based Biochip. Immobilization of capture probes onto the Au-IDA was accomplished by self-assembling of thiol-modified oligonucleotides. Target hybridization was indicated by a change in the magnitude of the time dependant potential relaxation curve in presence of electroactive Fe(CN)(6)(3-) in the phosphate buffer solution. While complementary DNA hybridization showed 50% increase in the relaxation potential, the non-complementary DNA showed a negligible change. A constant behaviour was noted for all positions. The dsDNA specific intercalating molecule, methylene blue, was found to be enhancing the discrimination effect. The changes in the relaxation potential curves were further corroborated following the ELISA like experiments using ExtraAvidine alkaline phosphatase labelling and redox recycling of para-aminophenol phosphate at IDAs. The coulostatic pulse technique was shown to be useful for identifying DNA sequences from brain tumour gene CK20, human herpes simplex virus, cytomegalovirus, Epstein-Barr virus and M13 phage. Compared to the hybridization of short chain ONTs (27 mers), the hybridization of long chain M13 phage DNA showed three times higher increase in the relaxation curves. The method is fast enough to monitor hybridization interactions in milli or microsecond time scales and is well suitable for miniaturization and integration compared to the common impedance techniques for developing capacitative DNA sensors.     

Label-free detection of nucleic acid and protein microarrays by scanning Kelvin nanoprobe

A high-resolution scanning Kelvin nanoprobe is introduced as an alternative technique to the conventional fluorescence and mass spectrometric detection methods currently employed in nucleic acid and protein microarray technology. The new instrument is capable of the highly sensitive discernment of surface biochemical events taking place at molecular level such as nucleic acid hybridization and antibody-antigen interaction. The method involves measurement of changes in work function and surface potential instigated by such interactions. Being a label-free and non-contact technique, the structure, spatial configuration, local properties or function of the molecular system under study are not affected, nor perturbed by intercalating dyes, a strong electric field or ionizing beam. Subsequent to scanning, the microarray can be examined by other alternative approaches. Nucleic acids and proteins have been printed in microarray format on slides with a gold film in place using gold-sulphur interactive chemistry. Hybridization of nucleic acids for complementary and mismatched configurations shows consistent and reproducible values of work function. Differentiation of single internal mismatches is demonstrated. Protein concentration and formation of antibody-antigen pairs can be visualized and examined with high sensitivity and good inter-spot reproducibility.     

Evaluation of hybridization conditions for spotted oligonucleotide-based DNA microarrays

We compared different hybridization conditions of oligonucleotide-based DNA microarray to acquire optimized and reliable microarray data. Several parameters were evaluated at different hybridization conditions, including signal-to-background (S:B) ratios, signal dynamic range, usable spots, and reproducibility. Statistical analysis showed that better results were obtained when spotted, presynthesized long oligonucleotide arrays were blocked with succinic anhydride and hybridized at 42°C in the presence of 50% formamide.     

A modified hybridization protocol for low-density diagnostic DNA microarrays

To promote the application of DNa microarrays for clinical diagnosis, the problems of cross-hybridization and low signal intensity in the hybridization processes has been addressed. We tested a new hybridization protocol for low-density diagnostic DNA microarrays, by skipping the purification step during sample labeling, while elevating the hybridization temperature from 42°C to 52°C, adding a step of distilled water rinsing immediately after hybridization and before the low stringency washing steps. It was found that the modified hybridization protocol works well in our study, which increased detection sensitivity and eliminated nonspecific signals.     

Detection of picogram amounts of nucleic acid by dot blot hybridization

An increasing number of human proteins isolated from cell sources are being produced for pharmaceutical use. Consequently, federal agencies have required the quantitative determination of residual nucleic acids that copurify with the potential protein products. We have conducted these assays in connection with our application for licensure of Alferon Injection. We report a sensitive dot blot hybridization assay that was used to quantitate picogram (or less) amounts of nucleic acids which copurified with human proteins isolated from recombinant (S. cerevisiae) or natural (leukocytes) sources.     

Topological constraints in nucleic acid hybridization kinetics

A theoretical examination of kinetic mechanisms for forming knots and links in nucleic acid structures suggests that molecules involving base pairs between loops are likely to become topologically trapped in persistent frustrated states through the mechanism of ‘helix-driven wrapping’. Augmentation of the state space to include both secondary structure and topology in describing the free energy landscape illustrates the potential for topological effects to influence the kinetics and function of nucleic acid strands. An experimental study of metastable complementary ‘kissing hairpins’ demonstrates that the topological constraint of zero linking number between the loops effectively prevents conversion to the minimum free energy helical state. Introduction of short catalyst strands that break the topological constraint causes rapid conversion to full duplex.     

Electric field directed nucleic acid hybridization on microchips.

Selection and adjustment of proper physical parameters enables rapid DNA transport, site selective concentration, and accelerated hybridization reactions to be carried out on active microelectronic arrays. These physical parameters include DC current, voltage, solution conductivity and buffer species. Generally, at any given current and voltage level, the transport or mobility of DNA is inversely proportional to electrolyte or buffer conductivity. However, only a subset of buffer species produce both rapid transport, site specific concentration and accelerated hybridization. These buffers include zwitterionic and low conductivity species such as: d- and l-histidine; 1- and 3-methylhistidines; carnosine; imidazole; pyridine; and collidine. In contrast, buffers such as glycine, beta-alanine and gamma-amino-butyric acid (GABA) produce rapid transport and site selective concentration but do not facilitate hybridization. Our results suggest that the ability of these buffers (histidine, etc.) to facilitate hybridization appears linked to their ability to provide electric field concentration of DNA; to buffer acidic conditions present at the anode; and in this process acquire a net positive charge which then shields or diminishes repulsion between the DNA strands, thus promoting hybridization.     

Amplified detection of nucleic acid by G-quadruplex based hybridization chain reaction

A protein-free, isothermal, self-amplified nucleic acid sensing system which was a G-quadruplex integrated hybridization chain reaction (GQ-HCR) system was developed. The G-quadruplex was closed two-thirds in the loop and one-third in the stem of one of the GQ-HCR hairpin probes. In the absence of the target molecule, the GQ-HCR probes stayed as inactive meta-stable hairpin structures and the G-quadruplex was inert. Reversely, the GQ-HCR probes could be cross-opened to start a hybridization chain reaction and the closed G-quadruplex could be released to be free when the GQ-HCR probes came across the target molecule. The GQ-HCR nucleic acid sensing system could detect as low as 7.5nM ssDNA or RNA by the colorimetric method and 4nM ssDNA by the fluorometric method. Less than 10 copies of dsDNA template could also be detected when PCR was combined with the GQ-HCR system (PCR+GQ-HCR). Because of these advantages, the GQ-HCR system was also studied for application in visual chip detection to obtain a satisfactory repeatable and specific result.     

Use of bioluminescence in nucleic acid hybridization reactions

Luminescence reactions can be used to detect specific nucleic acid sequences hybridized with a nucleic probe. Different labels such as cytidine sulphone, fluorescein, and biotin can be incorporated into DNA or oligonucleotide molecules and detected by antibody or avidin conjugates coupled to glucose-6P dehydrogenase. On supports such as nitrocellulose filters, sensitivity is not greatly increased using luminescence, but detection is rapid and easy to perform using polaroid film. Moreover, hybridization can be performed with different labelled probes on the same sample. In solution, luminescence can be used to monitor sandwich reactions. The method is less sensitive than detection on filters but can easily be automated. The performance of these assays can be increased considerably by enzymatic amplification of the target catalysed by a thermostable polymerase.