Effects of carbon and nitrogen sources,carbon-to-nitrogen ratio,and initial pH on the growth of nematophagous fungus <Emphasis Type="Italic">Pochonia chlamydosporia</Emphasis> in liquid culture

The effects of carbon and nitrogen sources, carbon-to-nitrogen ratio (C:N) and initial pH value on the growth and sporulation of the nematophagous fungus Pochonia chlamydosporia in liquid culture were examined. Among the 21 carbon sources and 15 nitrogen compounds tested, the optimal carbon and nitrogen sources for mycelial growth were sweet potato and L-tyrosine, and for sporulation were sweet potato and casein peptone. A C:N ratio of 10:1 at pH 3.7 gave the maximum yield of conidia and a C:N ratio of 40:1 at pH 6.8 gave the maximum biomass. The initial pH value had a significant effect on mycelial growth and conidial production, with the optimal ranges being 3.5–4.5 for sporulation and 5–6 for growth. Maximum conidial production was obtained at an initial pH of 4.0 and the maximum biomass at pH 6.0. The results also showed that the final pH after 7 days cultivation was always higher than the initial value. The variability in growth and sporulation of seven strains of P. chlamydosporia in liquid culture was also compared and discussed.     

A homozygous <Emphasis Type="Italic">recA</Emphasis> mutant of <Emphasis Type="Italic">Synechocystis</Emphasis> PCC6803: construction strategy and characteristics eliciting a novel RecA independent UVC resistance in dark

We report here the construction of a homozygous recA460::cam insertion mutant of Synechocystis sp. PCC 6803 that may be useful for plant molecular genetics by providing a plant like host free of interference from homologous recombination. The homozygous recA460::cam mutant is highly sensitive to UVC under both photoreactivating and nonphotoreactivating conditions compared to the wild type (WT). The liquid culture of the mutant growing in ~800 lx accumulates nonviable cells to the tune of 86% as estimated by colony counts on plates incubated at the same temperature and light intensity. The generation time of recA mutant in standard light intensity (2,500 lx) increases to 50 h compared to 28 h in lower light intensity (~800 lx) that was used for selection, thus explaining the earlier failures to obtain a homozygous recA mutant. The WT, in contrast, grows at faster rate (23 h generation time) in standard light intensity compared to that at ~800 lx (26 h). The Synechocystis RecA protein supports homologous recombination during conjugation in recA ^— mutant of Escherichia coli, but not the SOS response as measured by UV sensitivity. It is suggested that using this homozygous recA460::cam mutant, investigations can now be extended to dissect the network of DNA repair pathways involved in housekeeping activities that may be more active in cyanobacteria than in heterotrophs. Using this mutant for the first time we provide a genetic evidence of a mechanism independent of RecA that causes enhanced UVC resistance on light to dark transition.     

Optimization of critical medium components using response surface methodology for biomass and extracellular polysaccharide production by <Emphasis Type="Italic">Agaricus blazei</Emphasis>

Response surface methodology (RSM) was applied to optimize the critical medium ingredients of Agaricus blazei. A three-level Box–Behnken factorial design was employed to determine the maximum biomass and extracellular polysaccharide (EPS) yields at optimum levels for glucose, yeast extract (YE), and peptone. A mathematical model was then developed to show the effect of each medium composition and its interactions on the production of mycelial biomass and EPS. The model predicted the maximum biomass yield of 10.86 g/l that appeared at glucose, YE, peptone of 26.3, 6.84, and 6.62 g/l, respectively, while a maximum EPS yield of 348.4 mg/l appeared at glucose, YE, peptone of 28.4, 4.96, 5.60 g/l, respectively. These predicted values were also verified by validation experiments. The excellent correlation between predicted and measured values of each model justifies the validity of both the response models. The results of bioreactor fermentation also show that the optimized culture medium enhanced both biomass (13.91 ± 0.71 g/l) and EPS (363 ± 4.1 mg/l) production by Agaricus blazei in a large-scale fermentation process.     

Optimization of submerged culture condition for the production of mycelial biomass and exopolysaccharides by Agrocybe cylindracea

The optimization of submerged culture conditions and nutritional requirements was studied for the production of exopolysaccharide (EPS) from Agrocybe cylindracea ASI-9002 using the statistically based experimental design in a shake flask culture. Both maximum mycelial biomass and EPS were observed at 25 degrees C. The optimal initial pH for the production of mycelial biomass and EPS were found to be pH 4.0 and pH 6.0, respectively. Subsequently, optimum concentration of each medium component was determined using the orthogonal matrix method. The optimal combination of the media constituents for mycelial growth was as follows: maltose 80 g/l, Martone A-1 6 g/l, MgSO4 x 7H2O 1.4 g/l, and CaCl2 1.1 g/l; for EPS production: maltose 60 g/l, Martone A-1 6 g/l, MgSO4 x 7H2O 0.9 g/l, and CaCl2 1.1 g/l. Under the optimal culture condition, the maximum EPS concentration achieved in a 5-l stirred-tank bioreactor indicated 3.0 g/l, which is about three times higher than that at the basal medium.     

Effects of phytohormones on mycelial growth and exopolysaccharide biosynthesis of medicinal mushroom <Emphasis Type="Italic">Pellinus linteus</Emphasis>

Effects of phytohormones including indole-3-acetic acid (IAA), indole-3-butyric acid (IBA) and 1-naphthalentacetic acid (NAA) on mycelial growth of medicinal mushroom Phellinus linteus were investigated. Under the optimal IAA, IBA and NAA concentration of 1.0, 1.5 and 5.0 mg/l, the maximal mycelial diameter reached 8.6 ± 0.4, 7.3 ± 2.6 and 9.0 ± 1.0 mm, respectively. The mycelial biomass and exopolysaccharide (EPS) production with addition of 5.0 mg/l NAA in a shake flask were 6.24 ± 0.18 g/l at 168 h and 0.86 ±0.01 g/l at 192 h, which were enhanced by 15.98 and 56.36% compared to the control, respectively. However, the molecular weight and infrared spectrum of EPS were coincident with the control. Results indicated that NAA at the proper concentration was beneficial in stimulating mycelial growth and EPS biosynthesis, whereas it could not alter the molecular structure of EPS. An erratum to this article can be found at     

Optimization of submerged culture process for the production of mycelial biomass and exo-polysaccharides by Cordyceps militaris C738

AIMS: The objective of the present study was to determine the optimal culture conditions for mycelial biomass and exo-polysaccharide (EPS) by Cordyceps militaris C738 in submerged culture. METHODS AND RESULTS: The optimal temperatures for mycelial biomass and EPS production were 20 degrees C and 25 degrees C, respectively, and corresponding optimal initial pHs were found to be 9 and 6, respectively. The suggested medium composition for EPS production was as follows: 6% (w/v) sucrose, 1% (w/v) polypeptone, and 0.05% (w/v) K2HPO4. The influence of pH on the fermentation broth rheology, morphology and EPS production of C. militaris C738 was carried out in a 5-l stirred-tank fermenter. The morphological properties were comparatively characterized by pellet roughness and compactness by use of image analyser between the culture conditions with and without pH control. The roughness and compactness of the pellets indicated higher values at pH-stat culture (pH 6.0), suggesting that larger and more compact pellets were desirable for polysaccharide production (0.91 g g(-1) cell d(-1). CONCLUSIONS: Under the optimized culture conditions (with pH control at 6), the maximum concentration of biomass and EPS were 12.7 g l(-1) and 7.3 g l(-1), respectively, in a 5-l stirred-tank fermenter. SIGNIFICANCE AND IMPACT OF THE STUDY: The critical effect of pH on fungal morphology and rheology presented in this study can be widely applied to other mushroom fermentation processes.     

Enhanced production of exopolysaccharides by fed-batch culture of Ganoderma resinaceum DG-6556

The objectives of this study were to optimize submerged culture conditions of a new fungal isolate, Ganorderma resinaceum, and to enhance the production of bioactive mycelial biomass and exopolysaccharides (EPS) by fed-batch culture. The maximum mycelial growth and EPS production in batch culture were achieved in a medium containing 10 g/l glucose, 8 g/l soy peptone, and 5 mM MnCl(2) at an initial pH 6.0 and temperature 31 degrees C. After optimization of culture medium and environmental conditions in batch cultures, a fed-batch culture strategy was employed to enhance production of mycelial biomass and EPS. Five different EPS with molecular weights ranging from 53,000 to 5,257,000 g/mole were obtained from either top or bottom fractions of ethanol precipitate of culture filtrate. A fed-batch culture of G. resinaceum led to enhanced production of both mycelial biomass and EPS. The maximum concentrations of mycelial biomass (42.2 g/l) and EPS (4.6 g/l) were obtained when 50 g/l of glucose was fed at day 6 into an initial 10 g/l of glucose medium. It may be worth attempting with other mushroom fermentation processes for enhanced production of mushroom polysaccharides, particularly those with industrial potential.     

Heterofermentative pattern and exopolysaccharide production by Lactobacillus helveticus ATCC 15807 in response to environmental pH

AIMS: The objective of this work was to evaluate the fermentation pattern of and the exopolysaccharide (EPS) production by Lactobacillus helveticus ATCC 15807 in milk batch cultures under controlled pH (4.5, 5.0 and 6.2). METHODS AND RESULTS: EPS concentration was estimated by the phenol/sulphuric acid method and the chemical composition of purified EPS by HPLC. Fermentation products and residual sugars were determined by HPLC and enzymatic methods. The micro-organism shifted from a homofermentative to a heterofermentative pattern, producing acetate (9.5 and 5.8 mmol l(-1)) at pH 5.0 and 6.2, respectively, and acetate (7.1 mmol l(-1)) plus succinate (1.2 mmol l(-1)) at pH 4.5. At pH 5.0 and 6.2, acetate derived from citrate while at pH 4.5 it came from both citrate and pyruvate splitting. The EPS has a MW of 10(5)-10(6) and contains phosphate (81% in average), rhamnose (traces), and glucose and galactose in a ratio of 1 : 1 (pH 6.2) and 2 : 1 (pH 4.5 and 5.0). The highest production (549 mg l(-1)) corresponded to pH 5.0 and the lowest (49 mg l(-1)) to pH 6.2. CONCLUSIONS: The heterofermentative pattern of Lact. helveticus ATCC 15807 was linked to alternative pyruvate pathways and/or citrate metabolism according to the environmental pH. The EPS production was improved under low environmental pH conditions. SIGNIFICANCE AND IMPACT OF THE STUDY: This work provides relevant information of the effect of pH on the metabolism of citrate and EPS production by Lact. helveticus. It may contribute to improve technological aspects of ropy and citrate-utilizing lactic acid bacteria.     

Optimization of exopolysaccharide production from Armillaria mellea in submerged cultures

Aims: To study the optimization of submerged culture conditions for exopolysaccharide (EPS) production by Armillaria mellea in shake‐flask cultures and also to evaluate the performance of an optimized culture medium in a 5‐l stirred tank fermenter. Methods and Results: Shake flask cultures for EPS optimal nutritional production contained having the following composition (in g l^?1): glucose 40, yeast extract 3, KH₂PO₄ 4 and MgSO₄ 2 at an optimal temperature of 22°C and an initial of pH 4·0. The optimal culture medium was then cultivated in a 5‐l stirred tank fermenter at 1 vvm (volume of aeration per volume of bioreactor per min) aeration rate, 150 rev min^?1 agitation speed, controlled pH 4·0 and 22°C. In the optimal culture medium, the maximum EPS production in a 5‐l stirred tank fermenter was 588 mg l^?1, c. twice as great as that in the basal medium. The maximum productivity for EPS (Q_p) and product yield (Y_P/S) were 42·02 mg l^?1 d^?1 and 26·89 mg g^?1, respectively. Conclusions: The optimal culture conditions we proposed in this study enhanced the EPS production of A. mellea from submerged cultures. Significance and Impact of the Study: The optimal culturing conditions we have found will be a suitable starting point for a scale‐up of the fermentation process, helping to develop the production of related medicines and health foods from A. mellea.     

Optimization of submerged culture conditions for exopolysaccharide production in <Emphasis Type="Italic">Sarcodon aspratus</Emphasis> (Berk) S.lto TG-3

The effect of medium components (carbon, nitrogen, and mineral sources) and environmental factors (initial pH and temperature) for mycelial growth and exopolysaccharide (EPS) production in Sarcodon aspratus(Berk) S.lto TG-3 was investigated. The optimal temperature (25°C) and initial pH (5.0) for the EPS production in shake flask cultures of S. aspratus were determined using the two-dimensional contour plot. The most suitable carbon, nitrogen, and mineral sources for EPS production were glucose, yeast extract, CaCl₂ and KH₂PO₄, respectively. Notably, the EPS production was significantly enhanced by supplementation of calcium ion. Subsequently, the optimum concentration of glucose (30gl^–1), yeast extract (15gl^–1), CaCl₂ (1.1gl^–1), and KH₂PO₄ (1.2gl^–1) were determined using the orthogonal matrix method. The effects of nutritional requirement on the mycelial growth of S.aspratuswere in regular sequence of glucose>KH₂PO₄>yeast extract>CaCl₂, and those on EPS production were in the order of glucose>yeast extract>CaCl₂>KH₂PO₄. Under the optimal culture conditions, the maximum EPS concentration in a 5-l stirred-tank reactor was 2.68gl^–1 after 4days of fermentation, which was 6-fold higher than that at a basal medium. The two-dimensional contour plot and orthogonal matrix method allowed us to find the relationship between environmental factors and nutritional requirement by determining optimal operating conditions for maximum EPS production in S.asparatus. The statistical experiments used in this work can be useful strategies for optimization of submerged culture processes for other mushrooms.     

Effects of culture conditions on the mycelial growth and bioactive metabolite production in submerged culture of Cordyceps militaris

The influence of initial pH value, various nitrogen sources, plant oils, and modes of propagation (shake-flask and static culture) on the production of biomass, exopolysaccharide (EPS), adenosine and, in particular, cordycepin, by Cordyceps militaris CCRC 32219 were investigated. Optimal conditions for mycelial growth, EPS and cordycepin production were observed at relatively low pH. Amongst organic sources, yeast extract (YE) was favorable for EPS and cordycepin production, while corn steep powder (CSP) was favorable for adenosine production. A lower C/N ratio was favorable for adenosine and cordycepin production; however, too low a C/N ratio led to diminished production. All plant oils tested stimulate mycelial growth and EPS production of C. militaris, but they did not show much effect on the adenosine and cordycepin production. A two-stage fermentation process by combining shake-flask fermentation with static culture significantly enhanced cordycepin production. A Box–Behnken experimental design was employed to optimize the production of cordycepin, which showed that the optimum conditions to produce cordycepin by C. militaris CCRC 32219 were at pH 6, YE concentration of 45 g/l and 8.0 day of the shake culture followed by 16 days of the static culture. Under the optimized conditions, the maximum production (2214.5 mg/l) of cordycepin was obtained, which is much higher than those reported up to date.     

Prospects of using marine actinobacteria as probiotics in aquaculture

In the present study, optimum culture conditions for the production of extracellular polysaccharides (EPS) in submerged culture of an edible mushroom, Laetiporus sulphureus var. miniatus and their stimulatory effects on insulinoma cell (RINm5F) proliferation and insulin secretion were investigated. The maximum mycelial growth (4.1 g l⁻¹) and EPS production (0.6 g l⁻¹) in submerged flask culture were achieved in a medium containing 30 g l⁻¹ maltose, 2 g l⁻¹ soy peptone, and 2 mM MnSO₄·5H₂O at an initial pH 2.0 and temperature 25°C. In the stirred-tank fermenter under optimized medium, the concentrations of mycelial biomass and EPS reached a maximum level of 8.1 and 3.9 g l⁻¹, respectively. Interestingly, supplementation of deep sea water (DSW) into the culture medium significantly increased both mycelial biomass and EPS production by 4- and 6.7-fold at 70% (v/v) DSW medium, respectively. The EPS were proved to be glucose-rich polysaccharides and were able to increase proliferation and insulin secretary function of rat insulinoma RINm5F cells, in a dose-dependent manner. In addition, EPS also strikingly reduced the streptozotocin-induced apoptosis in RINm5F cells indicating the mode of the cytoprotective role of EPS on RINm5F cells.     

Increased production of extracellular polysaccharide by Porphyridium cruentum immobilized in foam sheets

Large‐size plate bioreactors were used to compare the production of extracellular polysaccharide by the red microalga Porphyridium cruentum when grown in suspension and in a foam sheet. A well‐defined illuminated area and unidirectional light propagation allowed us to generate information that is better quantified when expressed in terms of illuminated area. This is essential for meaningful comparison of data, especially considering that for a well‐designed and managed bioreactor, the culture production rates are believed to be light limited. At the same level of illumination, the culture immobilized in foam showed double the production rate of extracellular polysaccharide compared with the culture in suspension. The saturation level of biomass density per unit of illuminated area was eight times higher for the immobilized culture compared with the culture in suspension. Despite the increased biomass density for the immobilized culture, an increase in the light level above the optimum found for the culture in suspension reduced the extracellular polysaccharide production, suggesting that the photoinhibition light level was surpassed.     

Mixed culture of oleaginous yeast Rhodotorula glutinis and microalga Chlorella vulgaris for lipid production from industrial wastes and its use as biodiesel feedstock

A mixed culture of oleaginous yeast Rhodotorula glutinis and microalga Chlorella vulgaris was performed to enhance lipid production from industrial wastes. These included effluent from seafood processing plant and molasses from sugar cane plant. In the mixed culture, the yeast grew faster and the lipid production was higher than that in the pure cultures. This could be because microalga acted as an oxygen generator for yeast, while yeast provided CO(2) to microalga and both carried out the production of lipids. The optimal conditions for lipid production by the mixed culture were as follows: ratio of yeast to microalga at 1:1; initial pH at 5.0; molasses concentration at 1%; shaking speed at 200 rpm; and light intensity at 5.0 klux under 16:8 hours light and dark cycles. Under these conditions, the highest biomass of 4.63±0.15 g/L and lipid production of 2.88±0.16 g/L were obtained after five days of cultivation. In addition, the plant oil-like fatty acid composition of yeast and microalgal lipids suggested their high potential for use as biodiesel feedstock.     

Optimization of production of C-phycocyanin and extracellular polymeric substances by Arthrospira sp.

The key factors influencing the production of C-phycocyanin (C-PC) and extracellular polymeric substances (EPS) by photoautotrophic culture of Arthrospira sp. were optimized using Taguchi method. Six factors were varied at either three or two levels as follows: light intensity at three levels; three initial culture pHs; two species of Arthrospira; three concentrations of Zarrouk’s medium; three rates of aeration of the culture with air mixed with 2% v/v carbon dioxide; and two incubation temperatures. All cultures ran for 14 days. The optimal conditions for the production of C-PC and EPS were different. For both products, the best cyanobacterium proved to be Arthrospira maxima IFRPD1183. The production of C-PC was maximized with the following conditions: a light intensity of 68 µmol photons m⁻² s⁻¹ (a diurnal cycle of 16-h photoperiod and 8-h dark period), an initial pH of 10, the full strength (100%) Zarrouk’s culture medium, an aeration rate of 0.6 vvm (air mixed with 2% v/v CO₂) and a culture temperature of 30 °C. The concentration of Zarrouk’s medium was the most important factor influencing the final concentration of C-PC. The optimal conditions for maximal production of EPS were as follows: a light intensity of 203 µmol photons m⁻² s⁻¹ with the earlier specified light–dark cycle; an initial pH of 9.5; a 50% strength of Zarrouk’s medium; an aeration rate of 0.2 vvm (air mixed with 2% v/v CO₂); and a temperature of 35 °C. Production of C-PC and EPS in raceway ponds is discussed.

     

A comparative study on the production of exopolysaccharides between two entomopathogenic fungi Cordyceps militaris and Cordyceps sinensis in submerged mycelial cultures

AIMS: The present study comparatively investigates the optimal culture conditions for the production of exopolysaccharides (EPS) and cordycepin during submerged mycelial culture of two entomopathogenic fungi Cordyceps militaris and Cordyceps sinensis. METHODS AND RESULTS: Fermentations were performed in flasks and in 5-l stirred-tank fermenters. In the case of C. militaris, the highest mycelial biomass (22.9 g l(-1)) and EPS production (5 g l(-1)) were achieved in a medium of 40 g l(-1) sucrose, 5 g l(-1) corn steep powder at 30 degrees C, and an initial pH 8.0. The optimum culture conditions for C. sinensis was shown to be (in g l(-1)) 20 sucrose, 25 corn steep powder, 0.78 CaCl2, 1.73 MgSO4.7H2O at 20 degrees C, and an initial pH 4.0, where the maximum mycelial biomass and EPS were 20.9 and 4.1 g l(-1) respectively. Cordycepin, another bioactive metabolite, was excreted at low levels during the early fermentation period (maximum 38.8 mg l(-1) in C. militaris; 18.2 mg l(-1) in C. sinensis). CONCLUSIONS: The two fungi showed different nutritional and environmental requirements in their submerged cultures. Overall, the concentrations of mycelial biomass, EPS and cordycepin achieved in submerged culture of C. militaris were higher than those of C. sinensis. SIGNIFICANCE AND IMPACT OF THE STUDY: C. militaris and C. sinensis are representative insect-born fungi which have been longstanding and widely used as traditional medicines in eastern Asia. Comparative studies between two fungi are currently not available and this is the first report on the optimum medium composition for submerged culture of C. sinensis.     

Effect of environmental factors and precursors on oxalic acid production,mycelial biomass and virulence of a potential bioherbicide isolate of Sclerotium rolfsii SC64 produced in liquid culture

The fungus Sclerotium rolfsii is presently under development as a bioherbicide for broadleaf weed species using fungus-infested substrates as application material in this laboratory. The effect of environmental factors and three precursors (citric acid, ascorbic acid, and sodium succinate) on mycelial growth, oxalic acid production, and virulence by SC64 in liquid culture were investigated. The results showed that for mycelia growth the optimum liquid medium was Modified Richard's solution (MRS) among the five tested media, but potato dextrose broth (PDB) produced the maximum oxalic acid production and virulence on detached Solidago canadensis leaves. When PDB was used as the basic medium, the oxalic acid/mycelial dry weight (mg g^–1) ratio reached the peak 4 days after inoculation. The optimum temperature for oxalic acid production was at 27°C, but increased mycelial dry weight and virulence were observed at 30°C. The optimum range of initial pH value for oxalic acid accumulation was 4.0–6.0, with the optimal pH 5.0; highest mycelial growth was with an initial pH 3.5–6.0 (optimum pH 5.0) and subsequently pH 3.5–5.5 (maximum at pH 3.5). Both mycelial dry weight and oxalic acid production showed a decreasing trend as a result of the precursor of oxalic acid being added to PDB. Among the three precursors, the greatest decrease in mycelial dry weight, and oxalic acid production was caused by sodium succinate. This clarification of optimal conditions for production of mycelial biomass while insuring high concentrations of oxalic acid and high virulence should be useful for further development of this fungus as biocontrol agent.     

桑木层孔菌液体培养条件的研究

对桑木层孔菌(Phellinus mori)液体发酵条件进行了研究,以生物量和胞外多糖为指标,通过L16(45)和L9(34)正交表进行了两次正交试验,筛选出桑木层孔菌最适液体培养条件为:麦芽糖30 g/L,酵母浸粉和蛋白胨15 g/L(质量比2 1),KH2PO4和CaCl25.5 g/L(质量比1 1),初始pH6.0;通过单因素试验筛选出最适装液量为120 mL/250 mL,最适接种量为10%。在此条件下液体发酵培养7 d后,桑木层孔菌生物量达到23.375 g/L,胞外多糖产量达到3.993 g/L。     

Combined effect of temperature and light intensity on growth and extracellular polymeric substance production by the cyanobacterium Arthrospira platensis

The effects of light intensity and temperature on Arthrospira platensis growth and production of extracellular polymeric substances (EPS) in batch culture were evaluated using a three-level, full-factorial design and response surface methodology. Three levels were tested for each parameter (temperature: 30, 35, 40°C; light intensity: 50, 115, 180 μmol photons m⁻² s⁻¹). Both growth and EPS production are influenced mainly by the temperature factor but the interaction term temperature*light intensity also had a significant effect. In addition, conditions optimising EPS production are different from those optimising growth. The highest growth rate (0.414 ± 0.003 day⁻¹) was found at the lowest temperature (30°C) and highest light intensity (180 μmol photons m⁻² s⁻¹) tested, no optima were detectable within the given test range. Obviously, optima for growth must be at a temperature lower than 30°C and a light intensity higher than 180 μmol photons m⁻² s⁻¹. For EPS production, light intensity had a positive linear effect (optimum obviously higher than 180 μmol photons m⁻² s⁻¹), but for the temperature parameter a maximum effect was detectable at 35°C.     

Fermentation performance of an exopolysaccharide-producing strain of<Emphasis Type="Italic"> Lactobacillus delbrueckii</Emphasis> subsp.<Emphasis Type="Italic"> bulgaricus</Emphasis>

The formation of exopolysaccharide (EPS) and extracellular metabolites was studied in a strain of Lactobacillus delbrueckii subsp. bulgaricus (NCFB 2483), grown under batch culture conditions in a semi-defined medium incorporating lactose and casein hydrolysate. Performance parameters were derived from the fermentation data, and kinetic models were applied in order to describe the production of EPS, extracellular metabolites, and biomass produced. Lactose was split intracellularly, with the resultant galactose being exported from the cell, and the glucose being metabolised further to EPS and lactic acid. Production of EPS, lactate, and galactose was closely growth-associated and followed a pattern of primary kinetics. A marginally lower galactose level relative to the modelled levels throughout most of the time course of the fermentation suggests that not all galactose is exported from the cell, and that a low level of flux to other metabolites, such as EPS, might exist.