The crystal structure of Thermoactinomyces vulgaris R-47 alpha-amylase II (TVA II) complexed with transglycosylated product.

Alphan alpha-amylase (TVA II) from Thermoactinomyces vulgaris R-47 efficiently hydrolyzes alpha-1,4-glucosidic linkages of pullulan to produce panose in addition to hydrolyzing starch. TVA II also hydrolyzes alpha-1,4-glucosidic linkages of cyclodextrins and alpha-1,6-glucosidic linkages of isopanose. To clarify the basis for this wide substrate specificity of TVA II, we soaked 4(3)-alpha-panosylpanose (4(3)-P2) (a pullulan hydrolysate composed of two panosyl units) into crystals of D325N inactive mutated TVA II. We then determined the crystal structure of TVA II complexed with 4(2)-alpha-panosylpanose (4(2)-P2), which was produced by transglycosylation from 4(3)-P2, at 2.2-A resolution. The shape of the active cleft of TVA II is unique among those of alpha-amylase family enzymes due to a loop (residues 193-218) that is located at the end of the cleft around the nonreducing region and forms a 'dam'-like bank. Because this loop is short in TVA II, the active cleft is wide and shallow around the nonreducing region. It is assumed that this short loop is one of the reasons for the wide substrate specificity of TVA II. While Trp356 is involved in the binding of Glc +2 of the substrate, it appears that Tyr374 in proximity to Trp356 plays two roles: one is fixing the orientation of Trp356 in the substrate-liganded state and the other is supplying the water that is necessary for substrate hydrolysis.     

Yeast glycogenin (Glg2p) produced in Escherichia coli is simultaneously glucosylated at two vicinal tyrosine residues but results in a reduced bacterial glycogen accumulation.

Saccharomyces cerevisiae possesses two glycogenin isoforms (designated as Glg1p and Glg2p) that both contain a conserved tyrosine residue, Tyr232. However, Glg2p possesses an additional tyrosine residue, Tyr230 and therefore two potential autoglucosylation sites. Glucosylation of Glg2p was studied using both matrix-assisted laser desorption ionization and electrospray quadrupole time of flight mass spectrometry. Glg2p, carrying a C-terminal (His6) tag, was produced in Escherichia coli and purified. By tryptic digestion and reversed phase chromatography a peptide (residues 219-246 of the complete Glg2p sequence) was isolated that contained 4-25 glucosyl residues. Following incubation of Glg2p with UDPglucose, more than 36 glucosyl residues were covalently bound to this peptide. Using a combination of cyanogen bromide cleavage of the protein backbone, enzymatic hydrolysis of glycosidic bonds and reversed phase chromatography, mono- and diglucosylated peptides having the sequence PNYGYQSSPAM were generated. MS/MS spectra revealed that glucosyl residues were attached to both Tyr232 and Tyr230 within the same peptide. The formation of the highly glucosylated eukaryotic Glg2p did not favour the bacterial glycogen accumulation. Under various experimental conditions Glg2p-producing cells accumulated approximately 30% less glycogen than a control transformed with a Glg2p lacking plasmid. The size distribution of the glycogen and extractable activities of several glycogen-related enzymes were essentially unchanged. As revealed by high performance anion exchange chromatography, the intracellular maltooligosaccharide pattern of the bacterial cells expressing the functional eukaryotic transgene was significantly altered. Thus, the eukaryotic glycogenin appears to be incompatible with the bacterial initiation of glycogen biosynthesis.     

Mutations at subsite −3 in cyclodextrin glycosyltransferase from <Emphasis Type="Italic">Paenibacillus macerans</Emphasis> enhancing α-cyclodextrin specificity

A major disadvantage of cyclodextrin production is the limited cyclodextrin product specificity of cyclodextrin glycosyltransferase (CGTase). Here, we described mutations of Asp372 and Tyr89 at subsite −3 in the CGTase from Paenibacillus macerans strain JFB05-01. The results showed that Asp372 and Tyr89 played important roles in cyclodextrin product specificity of CGTase. The replacement of Asp372 by lysine and Tyr89 by aspartic acid, asparagine, lysine, and arginine resulted in a shift in specificity towards the production of α-cyclodextrin, which was most apparent for the mutants D372K and Y89R. Furthermore, the changes in cyclodextrin product specificity for the single mutants D372K and Y89R could be combined in the double mutant D372K/Y89R, which displayed a 1.5-fold increase in the production of α-cyclodextrin, with a concomitant 43% decrease in the production of β-cyclodextrin when compared to the wild-type CGTase. Thus, the D372K and Y89R single and double mutants were much more suitable for the industrial production of α-cyclodextrin than the wild-type enzyme. The enhanced α-cyclodextrin specificity of these mutants might be a result of stabilizing the bent conformation of the intermediate in the cyclization reaction.     

Optimization of cyclodextrin production from sago starch

Cyclodextrin (CD) is synthesized by bacterial cyclodextrin glycosyltransferase (CGTase) and is widely used in food, pharmaceutical, cosmetic, and agricultural industries. In this study, Bacillus circulans CGTase was partially purified by ammonium sulfate precipitation at 50-70% saturation. The optimum pH and temperature for CD production from sago starch were found to be in the ranges of 4.5-5.0 and 55-60 degrees C, respectively. beta-CD was the predominant product, constituting 65% of all CD products. The beta-CD produced using partially purified and crude CGTase were compared and found to have no significant difference in yield and productivity. The appropriate proportion of CGTase to sago starch for beta-CD production was determined by response surface methodology. The most appropriate enzyme:substrate ratio was 50 U g sago starch(-1) CGTase and 60 g l(-1) sago starch.     

Crystal structures of starch binding domain from Rhizopus oryzae glucoamylase in complex with isomaltooligosaccharide: Insights into polysaccharide binding mechanism of CBM21 family

Glucoamylases are responsible for hydrolysis of starch and polysaccharides to yield β‐d ‐glucose. Rhizopus oryzae glucoamylase (RoGA) is composed of an N‐terminal starch binding domain (SBD) and a C‐terminal catalytic domain connected by an O‐glycosylated linker. Two carbohydrate binding sites in RoSBD have been identified, site I is created by three highly conserved aromatic residues, Trp47, Tyr83, and Tyr94, and site II is built up by Tyr32 and Phe58. Here, the two crystal structures of RoSBD in complex with only α‐(1,6)‐linked isomaltotriose (RoSBD‐isoG3) and isomaltotetraose (RoSBD‐isoG4) have been determined at 1.2 and 1.3 Å, respectively. Interestingly, site II binding is observed in both complexes, while site I binding is only found in the RoSBD‐isoG4 complex. Hence, site II acts as the recognition binding site for carbohydrate and site I accommodates site II to bind isoG4. Site I participates in sugar binding only when the number of glucosyl units of oligosaccharides is more than three. Taken together, two carbohydrate binding sites in RoSBD cooperate to reinforce binding mode of glucoamylase with polysaccharides as well as the starch. Proteins 2014; 82:1079–1085. © 2013 Wiley Periodicals, Inc.     

Ovalbumin(323-339) peptide binds to the major histocompatibility complex class II I-A(d) protein using two functionally distinct registers

Proteins of the class II major histocompatibility complex (MHC) bind antigenic peptides that are subsequently presented to T cells. Previous studies have shown that most of the residues required for binding of the chicken ovalbumin (Ova) 323-339 peptide to the I-A(d) MHC class II protein are contained within the shorter 325-336 peptide. This observation is somewhat inconsistent with the X-ray structure of the Ova peptide covalently attached to I-A(d) ( structure) in which residues 323 and 324 form binding interactions with the protein. A second register for the Ova(325-336) peptide is proposed where residues 326 and 327 occupy positions similar to residues 323 and 324 in the structure. Two Ova peptides that minimally encompass the and alternate registers, Ova(323-335) and Ova(325-336), respectively, were found to dissociate from I-A(d) with distinct kinetics. The dissociation rates for both peptides were enhanced when the His81 residue of the MHC beta-chain was replaced with an asparagine. In the structure the betaH81 residue forms a hydrogen bond to the backbone carbonyl of I323. If the Ova(325-336) peptide were also bound in the register, there would be no comparable hydrogen-bond acceptor for the betaH81 side chain that could explain this peptide's sensitivity to the betaH81 replacement. The Ova(323-335) peptide that binds in the register does not stimulate a T-cell hybridoma that is stimulated by Ova(325-336) bound in the alternate register. These results demonstrate that a single peptide can bind to an MHC peptide in alternate registers producing distinct T-cell responses.     

An essential residue in the flexible peptide linking the two idiosynchratic domains of bacterial tyrosyl-tRNA synthetases

Tyrosyl-tRNA synthetase (TyrRS) from Bacillus stearothermophilus comprises three sequential domains: an N-terminal catalytic domain, an alpha-helical domain with unknown function, and a C-terminal tRNA binding domain (residues 320-419). The properties of the polypeptide segment that links the alpha-helical and C-terminal domains, were analyzed by measuring the effects of sequence changes on the aminoacylation of tRNA(Tyr) with tyrosine. Mutations F323A (Phe323 into Ala), S324A, and G325A showed that the side chain of Phe323 was essential but not those of Ser324 and Gly325. Insertions of Gly residues between Leu322 and Phe323 and the point mutation L322P showed that the position and precise orientation of Phe323 relative to the alpha-helical domain were important. Insertions of Gly residues between Gly325 and Asp326 and deletion of residues 330-339 showed that the length and flexibility of the sequence downstream from Gly325 were unimportant but that this sequence could not be deleted. Mutations F323A, -L, -Y, and -W showed that the essential property of Phe323 was its aromaticity. The Phe323 side chain contributed to the stability of the initial complex between TyrRS and tRNA(Tyr) for 2.0 +/- 0.2 kcal x mol(-1) and to the stability of their transition state complex for 4.2 +/- 0.1 kcal x mol(-1), even though it is located far from the catalytic site. The results indicate that the disorder of the C-terminal domain in the crystals of TyrRS is due to the flexibility of the peptide that links it to the helical domain. They identified Phe323 as an essential residue for the recognition of tRNA(Tyr).     

Proton N.M.R. study of the conformational dynamics of porcine pancreatic colipase. Titration of aromatic residues.

The low-field portion of the 360 MHz proton N.M.R. spectrum of native porcine pancreatic colipase has been studied as a function of pH over the pH range 2-12. Resonances associated with the 26 protons of the aromatic rings of the two histidines, two phenylalanines and three tyrosines have been identified and tentatively assigned to specific residues. Titrations of pH yielded apparent pKa's of 7.9, 6.9, 10.4, 10.3 and 11.3 for His I (His 30), His II (His 86), Tyr I (Tyr 56 or 57), Tyr II (Tyr 56 or 57) and Tyr III (Tyr 53) respectively (tentative assignments). The high pKa value of His 30 is attributed to the vicinity of Asp 31. The mobility of the aromatic ring of Tyr 53 is hindered and an upper bound of 500 s-1 on the rate of rotation can be estimated. The aromatic rings of the 2 other tyrosine residues and of the 2 phenylalanine residues can rotate freely on the N.M.R. time scale. The study of perturbations in titration profiles and chemical shift values reveals a specific interaction of His 86 with Tyr I and, to a lesser extent, Tyr II. The existence of this interaction indicates that the protein folding brings in close spatial vicinity two distant regions of the covalent structure to form a "hydrophobic-aromatic" site which might be involved in the binding of bile salt micelles to pancreatic colipase.     

1H-NMR studies of [Sar1]angiotensin II conformation by nuclear Overhauser effect spectroscopy in the rotating frame (ROESY): clustering of the aromatic rings in dimethylsulfoxide

The conformational properties of the octapeptide [Sar1]ANG II in dimethylsulfoxide-d6 were investigated by rotating frame nuclear Overhauser effect spectroscopy (ROESY). Interresidue ROESY interactions were observed between Tyr ortho and Phe ring protons, between Phe ring and Pro C gamma protons, and also between His C alpha and Pro C delta protons. A weak connectivity was also observed between the Sar N-CH3 protons and a Tyr ortho proton. Intraresidue interactions between alpha and beta protons in Tyr, His and Phe indicated restricted rotation for the side-chains of the three aromatic residues. These findings suggest that [Sar1]ANG II takes up a folded conformation in DMSO in which the three aromatic rings form a cluster. Connectivities between the His C alpha proton and the two Pro C delta protons illustrated a preferred conformation for angiotensin II in DMSO in which the His-Pro bond exists as the trans isomer. The NMR spectroscopic evidence is consistent with the presence of a Tyr charge relay system in the biologically active conformation of angiotensin II and with the postulated role of the Tyr hydroxyl group in angiotensin II for receptor activation.     

Associative and structural properties of the region of complement factor H encompassing the Tyr402His disease-related polymorphism and its interactions with heparin

Factor H (FH) is a major complement control protein in serum. The seventh short complement regulator (SCR-7) domain of the 20 in FH is associated with age-related macular degeneration through a Tyr402His polymorphism. The recombinant SCR-6/8 domains containing either His402 or Tyr402 and their complexes with a heparin decasaccharide were studied by analytical ultracentrifugation and X-ray scattering. The sedimentation coefficient is concentration dependent, giving a value of 2.0 S at zero concentration and a frictional ratio f/f(o) of 1.2 for both allotypes. The His402 allotype showed a slightly greater self-association than the Tyr402 allotype, and small amounts of dimeric SCR-6/8 were found for both allotypes in 50 mM, 137 mM and 250 mM NaCl buffers. Sedimentation equilibrium data were interpreted in terms of a monomer-dimer equilibrium with a dissociation constant of 40 microM for the His402 form. The Guinier radius of gyration R(G) of 3.1-3.3 nm and the R(G)/R(O) ratio of 2.0-2.1 showed that SCR-6/8 is relatively extended in solution. The distance distribution function P(r) showed a maximum dimension of 10 nm, which is less than the length expected for a linear domain arrangement. The constrained scattering and sedimentation modelling of FH SCR-6/8 showed that bent SCR arrangements fit the data better than linear arrangements. Previously identified heparin-binding residues were exposed on the outside curvature of this bent domain structure. Heparin caused the formation of a more linear structure, possibly by binding to residues in the linker. It was concluded that the His402 allotype may self-associate more readily than the Tyr402 allotype, SCR-6/8 is partly responsible for the folded-back structure of intact FH, and SCR-6/8 changes conformation upon heparin binding.     

Rational design of cyclodextrin glycosyltransferase from Bacillus circulans strain 251 to increase alpha-cyclodextrin production

Cyclodextrin glycosyltransferases (CGTase) (EC 2.4.1.19) are extracellular bacterial enzymes that generate cyclodextrins from starch. All known CGTases produce mixtures of alpha, beta, and gamma-cyclodextrins. A maltononaose inhibitor bound to the active site of the CGTase from Bacillus circulans strain 251 revealed sugar binding subsites, distant from the catalytic residues, which have been proposed to be involved in the cyclodextrin size specificity of these enzymes. To probe the importance of these distant substrate binding subsites for the alpha, beta, and gamma-cyclodextrin product ratios of the various CGTases, we have constructed three single and one double mutant, Y89G, Y89D, S146P and Y89D/S146P, using site-directed mutagenesis. The mutations affected the cyclization, coupling; disproportionation and hydrolyzing reactions of the enzyme. The double mutant Y89D/S146P showed a twofold increase in the production of alpha-cyclodextrin from starch. This mutant protein was crystallized and its X-ray structure, in a complex with a maltohexaose inhibitor, was determined at 2.4 A resolution. The bound maltohexaose molecule displayed a binding different from the maltononaose inhibitor, allowing rationalization of the observed change in product specificity. Hydrogen bonds (S146) and hydrophobic contacts (Y89) appear to contribute strongly to the size of cyclodextrin products formed and thus to CGTase product specificity. Changes in sugar binding subsites -3 and -7 thus result in mutant proteins with changed cyclodextrin production specificity.     

Analysis of Catalytic Residues of Thermoactinomyces vulgaris R-47 α-Amylase II (TVA II) by Site-directed Mutagenesis

To confirm that the catalytic residues (Asp325, Glu354, and Asp421) are necessary for the hydrolysis of starch, pullulan, and cyclodextrins, we constructed TVA II mutated by site-directed mutagenesis. The mutated enzymes (D325N, E354Q, and D421N) had markedly reduced levels of activity, less than 0.006% of the wild type, indicating that these three residues are the catalytic sites for these substrates. Even E354D had reduced levels of activity, less than 0.05% of wild type. These four mutated enzymes retained a trace of activity. From the result of hydrolysis patterns for maltohexaose, in particular, D421N, unlike D325N and E354Q, catalyzed transglycosylation rather than hydrolysis. The results suggest that Asp421 could function to capture water molecules.     

Analysis of catalytic residues of Thermoactinomyces vulgaris R-47 alpha-amylase II (TVA II) by site-directed mutagenesis

To confirm that the catalytic residues (Asp325, Glu354, and Asp421) are necessary for the hydrolysis of starch, pullulan, and cyclodextrins, we constructed TVA II mutated by site-directed mutagenesis. The mutated enzymes (D325N, E354Q, and D421N) had markedly reduced levels of activity, less than 0.006% of the wild type, indicating that these three residues are the catalytic sites for these substrates. Even E354D had reduced levels of activity, less than 0.05% of wild type. These four mutated enzymes retained a trace of activity. From the result of hydrolysis patterns for maltohexaose, in particular, D421N, unlike D325N and E354Q, catalyzed transglycosylation rather than hydrolysis. The results suggest that Asp421 could function to capture water molecules.     

Transglycosylation of benzo[h]quinazolines

This was the first study to apply cyclodextrin glucanotransferases (CGTase, EC 2.4.1.19) produced by mesophilic, thermophilic, alkaliphilic, and halophilic bacilli as well as pullulanase, β-amylase, β-galactosidase, and β-fructofuranosidase for transglycosylation of benzo[h]quinazolines. The combination of CGTase produced by Bacillus stearothermophilus ST-88 and γ-cyclodextrin (CD) used as a donor of glucosyl residues was the most efficient. The derivatives obtained are water-soluble. The synthesized products have been purified by various chromatographic methodsa and their fine structures have been determined.     

Role of Phe283 in enzymatic reaction of cyclodextrin glycosyltransferase from alkalophilic Bacillus sp.1011: Substrate binding and arrangement of the catalytic site

Cyclodextrin glycosyltransferase (CGTase) belonging to the alpha-amylase family mainly catalyzes transglycosylation and produces cyclodextrins from starch and related alpha-1,4-glucans. The catalytic site of CGTase specifically conserves four aromatic residues, Phe183, Tyr195, Phe259, and Phe283, which are not found in alpha-amylase. To elucidate the structural role of Phe283, we determined the crystal structures of native and acarbose-complexed mutant CGTases in which Phe283 was replaced with leucine (F283L) or tyrosine (F283Y). The temperature factors of the region 259-269 in native F283L increased >10 A(2) compared with the wild type. The complex formation with acarbose not only increased the temperature factors (>10 A(2)) but also changed the structure of the region 257-267. This region is stabilized by interactions of Phe283 with Phe259 and Leu260 and plays an important role in the cyclodextrin binding. The conformation of the side-chains of Glu257, Phe259, His327, and Asp328 in the catalytic site was altered by the mutation of Phe283 with leucine, and this indicates that Phe283 partly arranges the structure of the catalytic site through contacts with Glu257 and Phe259. The replacement of Phe283 with tyrosine decreased the enzymatic activity in the basic pH range. The hydroxyl group of Tyr283 forms hydrogen bonds with the carboxyl group of Glu257, and the pK(a) of Glu257 in F283Y may be lower than that in the wild type.     

Microanalysis of beta-cyclodextrin and glucosyl-beta-cyclodextrin in human plasma by high-performance liquid chromatography with pulsed amperometric detection.

High-performance liquid chromatography with pulsed amperometric detection was applied to the determination of beta-cyclodextrin (beta-CD) and glucosyl (G)-beta-CD in human plasma. They were well resolved from each other and from background components of plasma on a polymer-based reversed-phase column with 0.6% acetonitrile aqueous solution containing 1 mM sodium hydroxide as an eluent. The samples in the effluent were detected with a pulsed amperometric detector after postcolumn alkalization. The detection limits of beta-CD and G-beta-CD in plasma at a signal-to-noise ratio of 3 were 11 and 5 pmol, respectively.     

Hydrophobic amino acid residues in the acceptor binding site are main determinants for reaction mechanism and specificity of cyclodextrin-glycosyltransferase

Cyclodextrin-glycosyltransferases (CGTases) (EC ) preferably catalyze transglycosylation reactions with glucosyl residues as acceptor, whereas the homologous alpha-amylases catalyze hydrolysis reactions using water as acceptor. This difference in reaction specificity is most likely caused by the acceptor binding site. To investigate this in detail we altered the acceptor site residues Lys-232, Phe-183, Phe-259, and Glu-264 of Bacillus circulans strain 251 CGTase using site-directed mutagenesis. Lys-232 is of general importance for catalysis, which appears to result mainly from stabilization of the conformation of the loop containing the catalytic nucleophile Asp-229 and His-233, a residue that has been implied in transition state stabilization. Glu-264 contributes to the disproportionation reaction only, where it is involved in initial binding of the (maltose) acceptor. Phe-183 and Phe-259 play important and distinct roles in the transglycosylation reactions catalyzed by CGTase. Mutation of Phe-183 affects especially the cyclization and coupling reactions, whereas Phe-259 is most important for the cyclization and disproportionation reactions. Moreover, the hydrophobisity of Phe-183 and Phe-259 limits the hydrolyzing activity of the enzyme. Hydrolysis can be enhanced by making these residues more polar, which concomitantly results in a lower transglycosylation activity. A double mutant was constructed that yielded an enzyme preferring hydrolysis over cyclization (15:1), whereas the wild type favors cyclization over hydrolysis (90:1).     

Gonadotropin-releasing hormone analog structural determinants of selectivity for inhibition of cell growth: support for the concept of ligand-induced selective signaling

GnRH and its receptor are expressed in human reproductive tract cancers, and direct antiproliferative effects of GnRH analogs have been demonstrated in cancer cell lines. The intracellular signaling responsible for this effect differs from that mediating pituitary gonadotropin secretion. The GnRH structure-activity relationship is different for the two effects. Here we report a structure-activity relationship study of GnRH agonist antiproliferative action in model cell systems of rat and human GnRH receptors stably expressed in HEK293 cells. GnRH II was more potent than GnRH I in inhibiting cell growth in the cell lines. In contrast, GnRH I was more potent than GnRH II in stimulating inositol phosphate production, the signaling pathway in gonadotropes. The different residues in GnRH II (His(5), Trp(7), Tyr(8)) were introduced singly or in pairs into GnRH I. Tyr(5) replacement by His(5) produced the highest increase in the antiproliferative potency of GnRH I. Tyr(8) substitution of Arg(8) produced the most selective analog, with very poor inositol phosphate generation but high antiproliferative potency. In nude mice bearing tumors of the HEK293 cell line, GnRH II and an antagonist administration was ineffective in inhibiting tumor growth, but D-amino acid stabilized analogs (D-Lys(6) and D-Arg(6)) ablated tumor growth. Docking of GnRH I and GnRH II to the human GnRH receptor molecular model revealed that Arg(8) of GnRH I makes contact with Asp(302), whereas Tyr(8) of GnRH II appears to make different contacts, suggesting these residues stabilize different receptor conformations mediating differential intracellular signaling and effects on gonadotropin and cell growth. These findings provide the basis for the development of selective GnRH analog cancer therapeutics that directly target tumor cells or inhibit pituitary gonadotropins or do both.     

Mutations remote from the human gonadotropin-releasing hormone (GnRH) receptor-binding sites specifically increase binding affinity for GnRH II but not GnRH I: evidence for ligand-selective, receptor-active conformations

The human gonadotropin-releasing hormone (GnRH) receptor is evolutionarily configured for high affinity binding of GnRH I ([Tyr(5),Leu(7),Arg(8)]GnRH) but at lower affinity for GnRH II ([His(5),Trp(7),Tyr(8)]GnRH). GnRH I is more potent in the activation of the G(q/11) protein in the gonadotrope; however, GnRH II is more potent in the stimulation of apoptosis and antiproliferative effects through activating G(i) protein-mediated signaling, implying that GnRH I and II selectively stabilize different receptor-active conformations that preferentially couple to different signaling pathways. Receptor activation involves ligand induction or conformational selection, but the molecular basis of the communication between ligand-binding sites and receptor allosteric sites remains unclear. We have sought conformational coupling between receptor-ligand intermolecular interactions and intramolecular interaction networks in the human GnRH receptor by mutating remote residues that induce differential ligand binding affinity shifts for GnRH I and II. We have demonstrated that certain Ala mutations in the intracellular segments of transmembrane domains 3 (Met(132)), 5 (Met(227)), 6 (Phe(272) and Phe(276)), and 7 (Ile(322) and Tyr(323)) of the human GnRH receptor allosterically increased ligand binding affinity for GnRH II but had little effect on GnRH I binding affinity. We examined the role of the three amino acids that differ in these two ligands, and we found that Tyr(8) in GnRH II plays a dominant role for the increased affinity of the receptor mutants for GnRH II. We propose that creation of a high affinity binding site for GnRH II accompanies receptor conformational changes, i.e."induced fit" or "conformational selection," mainly determined by the intermolecular interactions between Tyr(8) and the receptor contact residues, which can be facilitated by disruption of particular sets of receptor-stabilizing intramolecular interactions. The findings suggest that GnRH I and II binding may selectively stabilize different receptor-active conformations and therefore different ligand-induced selective signaling described previously for these ligands.