Transformation ofStreptomyces avermitilis by plasmid DNA

Summary Polyethylene glycol (PEG) efficiently mediated the transformation ofStreptomyces avermitilis protoplasts by plasmid DNA to yield 10⁷ transformants per g of plasmid DNA. Under conditios in which the maximum transformation frequency was observed, the cotransformation frequency exceeded 10%. The number of transformants increased linearly with the amount of DNA and number ofS. avermitilis protoplasts. Relaxed and supercoiled, but not linear DNA transformed protoplasts efficiently. Dimethyl sulfoxide (DMSO)-mediated transformation of protoplasts was 1000-fold less efficient. PEG and, less efficiently, DMSO also mediated the transformation of whole cells ofS. avermitilis by DNA.     

Development of a genetic transformation system for Histoplasma capsulatum: complementation of uracil auxotrophy

Summary We have developed a simple and efficient transformation system for the dimorphic fungus Histoplasma capsulatum. Mutants of H. capsulatum defective in orotidine-5-monophosphate pyrophosphorylase were transformed to prototrophy by the cloned URA5 gene of the filamentous fungus Podospora anserina. Abortive and mitotically stable transformants were obtained. The stable transformants had integrated copies of the plasmid, some in tandem head-to-tail orientation. Free plasmid identical to the transforming plasmid was present in some of the transformants. We obtained a transformation efficiency of up to 30 transformants/g DNA for plasmid pPAura5-1 (9.2 kb). pPW2001, a smaller plasmid (4.7 kb) derived from pPAura5-1, transformed H. capsulatum more efficiently (up to 155 transformants/gm DNA).     

Research note: High efficiency transformation of the diatom Phaeodactylum tricornutum with a promoter from the diatom Cylindrotheca fusiformis

A high efficiency transformation system was established for the pennate diatom Phaeodactylum tricornutum Bohlin using a plasmid containing fucoxanthin chlorophyll a/c binding protein ( fcp ) promoter/terminator and nitrate reductase ( NR ) promoter/terminator that are derived from the pennate diatom Cylindrotheca fusiformis . The plasmid that contains the zeocin resistance gene ( ble ) with the fcp promoter and enhanced green fluorescent protein gene ( egfp ) with the NR promoter was introduced into P. tricornutum using microparticle bombardment. Transformants (650 ± 58 per 10⁸ cells) were obtained. The yield of transformants was between 1.5 and 130 times higher than previously reported P. tricornutum transformation systems. Four to seven copies of the ble gene were integrated into genomic DNA of the transformants. This high efficiency transformation system of P. tricornutum is expected to provide a powerful tool for high-throughput analysis of gene function using homologous recombination or RNAi.     

Optimized transformation by electroporation of Lactococcus lactis IL1403

Summary Rolling circle replication of plasmid pGKV21 in L. lactis was a more stable replication mode than the theta replication of plasmid pIL253. When the plasmid pGKV21 was used to develop and optimize transformation of L. lactis by electroporation, optimum transformation was obtained using dense suspension of late-exponential phase cells subjected to a high voltage (12.5 kV/cm) and a short pulse time (0.5 ms) in the presence of a plasmid DNA. With plasmid vector pGKV21, a transformation frequency of 2.2 × 10⁸ transformants per g of DNA was obtained.     

Improved transformation of Pseudomonas putida KT2440 by electroporation

Summary An electric field-mediated transformation (i.e. electroporation) was performed to determine optimal conditions for P. putida transformation. The effects of culture age, electroporation buffer composition, electric field strength, pulse time constant and DNA concentration on transformation efficiency were examined. When plasmid DNA of 8 to 11 kb in size was used with an electroporation buffer containing 1 mM HEPES (pH 7.0), maximum transformation efficiency of 1.0 × 10⁷ transformants/g DNA was obtained at field strength of 12 kV/cm with pulse time of 2.5 millisecond. A linear increase in the number of transformants was observed as DNA concentration was increased over 4 orders of magnitude. A linear relationship was observed between growth phase and transformation efficiency up to OD₆₀₀ = 2.0. This reliable and simple method should be useful for introduction of plasmid DNA into intact P. putida cells.     

Genetic transformation of Clostridium botulinum hall a by electroporation

Summary A method was developed for the introduction of plasmids into Clostridium botulinum by electroporation. A 4.4 kb plasmid vector, pGK12, which contains genes for resistance to erythromycin (Em^r) and chloramphenicol (Cm^r) was electroporated into C. botulinum type A (Hall A). The highest transformation efficiency was obtained using midlog phase cells, 10% PEG 8000 as the electroporation solution, and 2.5 kV field strength. The transformation efficiency was highest (10³ transformants/g of DNA) when 1 g of plasmid DNA and 4 × 10⁸ CFU/ml of recipient cells were used. Plasmid DNA recovered from the transformants was indistinguishable from that introduced on the basis of restriction enzyme digestion and agarose gel electrophoresis.     

High frequency transformation of Bacillus subtilis protoplasts by plasmid DNA.

Summary A highly efficient method for transformation of Bacillus subtilis by plasmid DNA is reported. The procedure, which involves polyethylene glycolinduced DNA uptake by protoplasts and subsequent regeneration of the bacterial cell wall, yields up to 80% transformants with an efficiency of 4x10⁷ transformants per g of supercoiled DNA. Plasmids constructed by in vitro ligation or endonuclease-generated fragments of linear plasmid DNA can also transform PEG-treated protoplasts, but at a lower frequency.     

Biotransformation of cholesterol by Micrococcus species mediated by plasmid DNA

A steroid-biotransforming strain RJ6 was identified as Micrococcus roseus. This bacterium has a 10kb plasmid pMQV10. Curing mediated through cultivation of the culture with a low concentration (200ng/ml) of mitomycin C is described. Loss of cholesterol degradation (chol⁺) and streptomycin resistance (Sm^r) phenotypes as a consequence of the loss of plasmid indicate the extrachromosomal location of these two genes in this strain. An electroporation procedure was developed for transformation of cured strain of Micrococcus (RJC6) by plasmids. Frequency of greater than 10⁵ transformants/g DNA was achieved, which is 100-fold higher than the standard transformation procedure that yielded 5.3×10³ transformants/g DNA in the same strain.     

Transformation of spheroplasts and protoplasts of Corynebacterium glutamicum

Summary Spheroplasts were prepared from Corynebacterium glutamicum ATCC13032 by growing cells in the presence of glycine followed by digestion with lysozyme. Using pUL330 a spheroplast transformation system was established routinely yielding 10³ to 10⁴ transformants per g of plasmid DNA. Spheroplasts were converted into protoplasts after incubation with the lytic enzyme achromopeptidase in the presence of additional lysozyme. Protoplasts prepared by this method regenerated at efficiencies of 10 to 30%. A protoplast transformation system was established routinely yielding 10⁵ to 10⁶ transformants per g of plasmid DNA. The Escherichia coli Brevibacterium lactofermentum shuttle vector pUL62 prepared from E. coli could be introduced into spheroplasts of C. glutamicum after heat treatment at 48 to 49°C for 10 min.     

High-frequency transformation ofLactobacillus casei with plasmid pHY300PLK by electroporation

To optimize the conditions for transformation ofLactobacillus casei ATCC 27092 cells with plasmid pHY300PLK, a shuttle vector forEscherichia coli andBacillus subtilis, by electroporation, we investigated the effects of the electrical parameters (voltage and resistance), the concentration of plasmid DNA, the cell age and density, the electroporation buffer, and other factors. Under optimal conditions of 2.0 kV, 100 ohm, and 25F, a transformation efficiency as high as 1.4×10⁷ transformants per g of plasmid DNA was obtained, with a survival rate of about 50%.L. casei YIT 9021, one of the PL-1 phage mutants of the ATCC 27092 strain, was also transformed with the same plasmid under optimal conditions. The transformants were confirmed to harbor the same intact plasmid molecules by agarose gel electrophoretic analysis.     

Electroporation of Bradyrhizobium japonicum

Summary Electroporation offers a fast, efficient and reproducible way to introduce DNA into bacteria. We have successfully used this technique to transform two commercially important strains of Bradyrhizobium japonicum, the nitrogen-fixing soybean symbiont. Initially, electroporation conditions were optimized using plasmid DNA which had been prepared from the same B. japonicum strain into which the{imDNA was to b}e transformed. Efficiencies of 10⁵-10⁶ transformants/g DNA were obtained for strains USDA 110 and 61A152 with ready-to-use frozen cells. Successful electroporation of B. japonicum with plasmid DNA prepared from Escherichia coli varied with the E. coli strain from which the plasmid was purified. The highest transformation efficiencies (10⁴ transformants/g DNA) were obtained using DNA prepared from a dcm ^– dam ^– strain of E. coli. This suggests that routine isolation of DNA from an E. coli strain incapable of DNA modification should help in increasing transformation efficiencies for other strains of bacteria where DNA restriction appears to be a significant obstacle to successful transformation. We have also monitored the rate of spontaneous mutation in electroporated cells and saw no significant difference in the frequency of streptomycin resistance for electroporated cells compared to control cells.     

Electrotransformation ofStreptococcus sanguis Challis

Plasmid DNA was introduced into noncompetent cells ofStreptococcus sanguis Challis by an electrotransformation technique. The procedure was simple and rapid, did not require elaborate pretreatment of cells, and yielded transformant colonies in 24 h. The maximum transformation efficiency attained was 2.1×10⁴ transformants per g of pVA736. Molecular rearrangements and deletions were not detected in plasmid DNA isolated from transformants.     

Targeted integrative transformation of Candida tropicalis by electroporation

Summary A method for integrative transformation of the diploid yeast Candida tropicalis by electroporation has been developed. By linearizing the transforming plasmid DNA containing the URA3 gene prior to electroporation of recipient cells, its integration was targeted to a specific locus in the genome, resulting in single or multiple tandem integrations. The optimal electroporation conditions for this yeast were established and include an electric pulse of 2.25 kV/cm for a duration of 50 ms. Using these conditions, Ura⁺ transformants were readily obtained at a high frequency (45 transformants/g DNA) as the result of targeted integration of the URA3 gene containing plasmid DNA at the chromosomal ura3 locus. The number of transformants resulting from this procedure is comparable to that achieved with a recently reported spheroplast transformation procedure for C. tropicalis; in addition, it offers the advantages of being simple, rapid and reproducible.     

Transformation of Bacillus brevis 47 by electroporation

Summary Bacillus brevis 47 was successfully and reproducibly transformed with pUB110 plasmid DNA by electroporation with an efficiency of 10⁴ transformants per g of DNA. This represents a 10-fold improvement over the chemical transformation method previously used for this organism.     

Transfer of the broad-host-range IncQ plasmid RSF1010 and other plasmid vectors to the Gram-positive methylotroph Brevibacterium methylicum by electrotransformation

Gram-positive facultative methylotrophic coryneform bacterium Brevibacterium methylicum was efficiently transformed with various plasmids using electroporation of intact cells. In addition to the plasmid vectors pEC71 and pZ6-1 constructed on the basis of cryptic plasmids from coryneform bacteria, broad-host-range plasmids pLS5 (derivative of plasmid pMV158 from Streptococcus agalactiae) and RSF1010 belonging to the incompatibility group IncQ from Gram-negative bacteria were found to be present as autonomous structurally unchanged DNA molecules in B. methylicum transformants. With the exception of pZ6-1, all these plasmids were stably maintained in B. methylicum cells grown under non-selective conditions. When plasmid DNAs isolated from B. methylicum were used, the highest efficiency of transformation (10⁵ transformants/g DNA) was achieved. Correspondence to: J. Nevera     

Cloning vector system forNocardia spp.

An electro-transformation system has been developed forNocardia asteroides andNocardia corallina by using aNocardia-Escherichia coli shuttle vector. The shuttle vector, named pCY104, was constructed by joining a 2.5-kb crypticN. asteroides plasmid pCY101 with theE. coli plasmid pIJ4625. The resistance genes for kanamycin, chloramphenicol, and thiostrepton on plasmid pCY104 were expressed inN. asteroides andN. corallina. The transformation method was optimized forN. asteroides, and transformation efficiency of 8×10⁴ transformants per g plasmid DNA was achieved routinely.     

Characterization of chromosome and plasmid transformation in Bacillus subtilis using gently lysed protoplasts

Competent cells of Bacillus subtilis were transformed with DNA from gently lysed protoplasts. Significant linkages among markers separated by distances of approximately 2.3% of the total chromosome were found, which have not been detected for conventional transformation. In comparison to previous reports, enhanced plasmid transformation was observed [4.0×10⁷ transformants per g DNA (one transformant per 5×10⁴ molecules added)], when competent cells were transformed with DNA from lysed protoplasts harboring pUB110.     

Transfection and transformation ofClostridium acetobutylicum strain N1-4081 protoplasts

Summary An improved technique of protoplast regeneration and a general procedure of transfection and plasmid transformation are described inClostridium acetobutylicum. Frequencies of 10⁴–10⁵ transfectants/transformants per g of DNA were easily achieved.     

Transformation of the rice blast fungus Magnaporthe grisea to benomyl resistance

A transformation method based on a dominant selectable marker (benomyl resistance) was developed for the rice blast fungus Magnaporthe grisea. The heterologous gene for -tubulin from Neurospora crassa (pBT3) was used to obtain benomyl-resistant M. grisea transformants at a frequency of 20 to 30/g of DNA. Control transformations carried out with a plasmid conferring hygromycin resistance or a derivative of pBT3 containing a repetitive DNA sequence, yielded the same frequency of transformation as that of pBT3. Molecular analysis of the transformants indicated multiple integration of the vector DNA.     

Genetic transformation of the filamentous yeast, Trichosporon cutaneum, using dominant selection markers

An efficient transformation system for the filamentous yeast, Trichosporon cutaneum, has been developed. Transformation was obtained with plasmids carrying either the Escherichia coli hygromycin B phosphotransferase-encoding gene (hph) or the Streptoalloteichus hindustanus phleomycin-resistance gene (ble), as dominant selection markers. Expression of both resistance-conferring genes was controlled by the gpd promoter and the trpC terminator, from Aspergillus nidulans. The transformation frequency was up to 500 colonies/micrograms of transforming DNA, using the ble gene, and up to 100 colonies/micrograms of transforming DNA, using the hph gene. Co-transformation frequencies using unselected DNA varied between 50 and 65%. The transforming DNA was found to consist of multiple tandem plasmid copies of high Mr. This polymeric structure, in nonselective media, was mitotically unstable, possibly indicating that it existed in an episomal state.