Large scale purification and refolding of HIV-1 protease fromEscherichia coli inclusion bodies

The protease encoded by the human immunodeficiency virus type 1 (HIV-1) was engineered inEscherichia coli as a construct in which the natural 99-residue polypeptide was preceded by an NH₂-terminal methionine initiator. Inclusion bodies harboring the recombinant HIV-I protease were dissolved in 50% acetic acid and the solution was subjected to gel filtration on a column of Sephadex G-75. The protein, eluted in the second of two peaks, migrated in SDS-PAGE as a single sharp band ofM _r ≈ 10,000. The purified HIV-1 protease was refolded into an active enzyme by diluting a solution of the protein in 50% acetic acid with 25 volumes of buffer atpH 5.5. This method of purification, which has also been applied to the purification of HIV-2 protease, provides a single-step procedure to produce 100 mg quantities of fully active enzyme.     

Purification of HIV-1 wild-type protease and characterization of proteolytically inactive HIV-1 protease mutants by pepstatin A affinity chromatography

Recombinant wild-type protease of human immunodeficiency virus, type [(HIV-1) expressed in E. coli was purified by pepstatin A affinity chromatography. An 88-fold purification was achieved giving a protease preparation with a specific enzymatic activity of approximately 3700 pmol/min/μg. Two proteolytically inactive HIV-1 mutant proteases (Arg-87 → Lys; Asn-88 → Glu) were found to bind to pepstatin A agarose, and they were purified as the wild-type protease. A third mutant protease (Arg-87 → Glu) was apparently unable to bind to pepstatin A under similar conditions. Binding to pepstatin A indicates the binding ability of the substrate binding site and the ability to form dimers. These features may be used to purify and to characterize other mutated HIV-1 proteases.     

HIV-1 protease inhibition potential of functionalized polyoxometalates

Polyoxometalates (POMs) are interesting biomedical agents due to their versatile anticancer and antiviral properties, such as remarkable anti-HIV activity. Although POMs are tunable and easily accessible inorganic drug prototypes in principle, their full potential can only be tapped by enhancing their biocompatibility, for example, through organic functionalization. We have therefore investigated the HIV-1 protease inhibition potential of functionalized Keggin- and Dawson-type POMs with organic side chains. Their inhibitory performance was furthermore compared to other POM types, and the buffer dependence of the results is discussed. In addition, chemical shift mapping NMR experiments were performed to exclude POM-substrate interactions. Whereas the introduction of organic side chains into POMs is a promising approach in principle, the influence of secondary effects on the reaction system also merits detailed investigation.     

Molecular dynamics of HIV-1 protease.

Molecular dynamics simulations have been carried out based on the GROMOS force field on the aspartyl protease (PR) of the human immunodeficiency virus HIV-1. The principal simulation treats the HIV-1 PR dimer and 6990 water molecules in a hexagonal prism cell under periodic boundary conditions and was carried out for a trajectory of 100 psec. Corresponding in vacuo simulations, i.e., treating the isolated protein without solvent, were carried out to study the influence of solvent on the simulation. The results indicate that including waters explicitly in the simulation results in a model considerably closer to the crystal structure than when solvent is neglected. Detailed conformational and helicoidal analysis was performed on the solvated form to determine the exact nature of the dynamical model and the exact points of agreement and disagreement with the crystal structure. The calculated dynamical model was further elucidated by means of studies of the time evolution of the cross-correlation coefficients for atomic displacements of the atoms comprising the protein backbone. The cross-correlation analysis revealed significant aspects of structure originating uniquely in the dynamical motions of the molecule. In particular, an unanticipated through-space, domain-domain correlation was found between the mobile flap region covering the active site and a remote regions of the structure, which collectively act somewhat like a molecular cantilever. The significance of these results is discussed with respect to the inactivation of the protease by site-specific mutagenesis, and in the design of inhibitors.     

Overcoming drug resistance in HIV-1 chemotherapy: the binding thermodynamics of Amprenavir and TMC-126 to wild-type and drug-resistant mutants of the HIV-1 protease

Amprenavir is one of six protease inhibitors presently approved for clinical use in the therapeutic treatment of AIDS. Biochemical and clinical studies have shown that, unlike other inhibitors, Amprenavir is severely affected by the protease mutation I50V, located in the flap region of the enzyme. TMC-126 is a second-generation inhibitor, chemically related to Amprenavir, with a reported extremely low susceptibility to existing resistant mutations including I50V. In this paper, we have studied the thermodynamic and molecular origin of the response of these two inhibitors to the I50V mutation and the double active-site mutation V82F/I84V that affects all existing clinical inhibitors. Amprenavir binds to the wild-type HIV-1 protease with high affinity (5.0 x 10(9) M(-1) or 200 pM) in a process equally favored by enthalpic and entropic contributions. The mutations I50V and V82F/I84V lower the binding affinity of Amprenavir by a factor of 147 and 104, respectively. TMC-126, on the other hand, binds to the wild-type protease with extremely high binding affinity (2.6 x 10(11) M(-1) or 3.9 pM) in a process in which enthalpic contributions overpower entropic contributions by almost a factor of 4. The mutations I50V and V82F/I84V lower the binding affinity of TMC-126 by only a factor of 16 and 11, respectively, indicating that the binding affinity of TMC-126 to the drug-resistant mutants is still higher than the affinity of Amprenavir to the wild-type protease. Analysis of the data for TMC-126 and KNI-764, another second-generation inhibitor, indicates that their low susceptibility to mutations is caused by their ability to compensate for the loss of interactions with the mutated target by a more favorable entropy of binding.     

An immunoenzymatic solid-phase assay for quantitative determination of HIV-1 protease activity

A novel immunoenzymatic procedure for the quantitative determination of HIV protease activity is provided. An N-terminal biotinylated peptide (DU1) that comprises an HIV-1 protease (HIV-PR) cleavage sequence was bound to streptavidin-coated microtiter plates. The bound peptide can be quantified by an immunoenzymatic procedure (enzyme-linked immunosorbent assay, ELISA) that includes a monoclonal antibody (Mab 332) against the peptide (DU1) C-terminal. The incubation of the bound peptide with HIV-PR in solution resulted in a signal decrement, as the peptide was hydrolyzed and the released C-terminal segment washed away. An equation that relates the amount of added enzyme to the kinetics of the reaction was written in order to describe this heterogeneous enzyme-quasi-saturable system. This equation allows quantitative determination of protease activity, a feature widely underrated in previous similar assays. The assay also allows evaluation of the inhibitory activity of HIV-PR inhibitors. Due to the intrinsic advantages of the ELISA format, this method could be used in high-throughput screening of HIV protease inhibitors. The assay can be extended to other proteolytic enzymes.     

The higher barrier of darunavir and tipranavir resistance for HIV-1 protease

Darunavir and tipranavir are two inhibitors that are active against multi-drug resistant (MDR) HIV-1 protease variants. In this study, the invitro inhibitory efficacy was tested against a MDR HIV-1 protease variant, MDR 769 82T, containing the drug resistance mutations of 46L/54V/82T/84V/90M. Crystallographic and enzymatic studies were performed to examine the mechanism of resistance and the relative maintenance of potency. The key findings are as follows: (i) The MDR protease exhibits decreased susceptibility to all nine HIV-1 protease inhibitors approved by the US Food and Drug Administration (FDA), among which darunavir and tipranavir are the most potent; (ii) the threonine 82 mutation on the protease greatly enhances drug resistance by altering the hydrophobicity of the binding pocket; (iii) darunavir or tipranavir binding facilitates closure of the wide-open flaps of the MDR protease; and (iv) the remaining potency of tipranavir may be preserved by stabilizing the flaps in the inhibitor-protease complex while darunavir maintains its potency by preserving protein main chain hydrogen bonds with the flexible P2 group. These results could provide new insights into drug design strategies to overcome multi-drug resistance of HIV-1 protease variants.     

Thermodynamic linkage between the binding of protons and inhibitors to HIV-1 protease

The aspartyl dyad of free HIV-1 protease has apparent pK(a)s of approximately 3 and approximately 6, but recent NMR studies indicate that the aspartyl dyad is fixed in the doubly protonated form over a wide pH range when cyclic urea inhibitors are bound, and in the monoprotonated form when the inhibitor KNI-272 is bound. We present computations and measurements related to these changes in protonation and to the thermodynamic linkage between protonation and inhibition. The Poisson-Boltzmann model of electrostatics is used to compute the apparent pK(a)s of the aspartyl dyad in the free enzyme and in complexes with four different inhibitors. The calculations are done with two parameter sets. One assigns epsilon = 4 to the solute interior and uses a detailed model of ionization; the other uses epsilon = 20 for the solute interior and a simplified representation of ionization. For the free enzyme, both parameter sets agree well with previously measured apparent pK(a)s of approximately 3 and approximately 6. However, the calculations with an internal dielectric constant of 4 reproduce the large pKa shifts upon binding of inhibitors, but the calculations with an internal dielectric constant of 20 do not. This observation has implications for the accurate calculation of pK(a)s in complex protein environments. Because binding of a cyclic urea inhibitor shifts the pK(a)s of the aspartyl dyad, changing the pH is expected to change its apparent binding affinity. However, we find experimentally that the affinity is independent of pH from 5.5 to 7.0. Possible explanations for this discrepancy are discussed.     

Design of a folding inhibitor of the HIV-1 protease

A novel way to inhibit HIV-1 protease by destabilizing its native state is discussed. A simplified protein model is used together with Monte Carlo simulations, to assess the destabilizing effect of peptides displaying the same sequence as specific fragments of the protein which are essential for its stability. Model calculations also show that it is unlikely that the protein can escape the inhibitory peptide by point mutations.     

High-performance liquid chromatographic assay of a new HIV-1 protease inhibitor, LB71350, in the plasma of dogs

A reliable reversed-phase high-performance liquid chromatographic method has been developed for the determination of LB71350 in the plasma of dogs. The analyte was deproteinized with 1.5 volumes of methanol and 0.5 volumes of 10% zinc sulfate, and the supernatant was injected into a 5-μm Capcell Pak C₁₈ column (150×4.6 mm I.D.). The mobile phase was a stepwise gradient mixture of acetonitrile and 0.2% triethylamine–HCl with a flow-rate of 1 ml/min and detection at UV 245 nm. The proportion of acetonitrile was kept at 52% for the first 6 min, increased to 100% for the next 0.5 min, kept at 100% for the next 2 min, decreased to 52% for the next 0.5 min, and finally kept at 52% for the next 7 min. The retention time of LB71350 was 6.9 min. The calibration was linear over the concentration range of 0.1–100 mg/l for dog plasma (r>0.997) and the limit of quantitation was 0.1 mg/l using 0.1 ml plasma. The quality control samples were reproducible with acceptable accuracy and precision at 0.1, 1, 10 and 100 mg/l concentrations. The within-day recovery (n=5) was 90.2–93.9%, the between-day recovery (n=5) was 89.5–93.5%, and the absolute between-day recovery (n=5) was 77–81%. The within-day precision (n=5) and between-day precision (n=5) were 2.59–5.82% and 3.17–4.55%, respectively. No interferences from endogenous substances were observed. Taken together, the above HPLC assay method by deproteinization and UV detection was suitable for the determination of LB71350 in the preclinical pharmacokinetics.     

Molecular dynamics studies on HIV-1 protease: a comparison of the flap motions between wild type protease and the M46I/G51D double mutant

The emergence of drug-resistant mutants of HIV-1 is a tragic effect associated with conventional long-treatment therapies against acquired immunodeficiency syndrome. These mutations frequently involve the aspartic protease encoded by the virus; knowledge of the molecular mechanisms underlying the conformational changes of HIV-1 protease mutants may be useful in developing more effective and longer lasting treatment regimes. The flap regions of the protease are the target of a particular type of mutations occurring far from the active site. These mutations modify the affinity for both substrate and ligands, thus conferring resistance. In this work, molecular dynamics simulations were performed on a native wild type HIV-1 protease and on the drug-resistant M46I/G51D double mutant. The simulation was carried out for a time of 3.5 ns using the GROMOS96 force field, with implementation of the SPC216 explicit solvation model. The results show that the flaps may exist in an ensemble of conformations between a “closed” and an “open” conformation. The behaviour of the flap tips during simulations is different between the native enzyme and the mutant. The mutation pattern leads to stabilization of the flaps in a semi-open configuration.     

Potent HIV-1 protease inhibitors incorporating squaramide-derived P2 ligands: Design,synthesis, and biological evaluation

We describe the design, synthesis, and biological evaluation of novel HIV-1 protease inhibitors containing a squaramide-derived scaffold as the P2 ligand in combination with a (R)-hydroxyethylamine sulfonamide isostere. Inhibitor 3h with an N-methyl-3-(R)-aminotetrahydrofuranyl squaramide P2-ligand displayed an HIV-1 protease inhibitory K_i value of 0.51 nM. An energy minimized model of 3h revealed the major molecular interactions between HIV-1 protease active site and the tetrahydrofuranyl squaramide scaffold that may be responsible for its potent activity.     

Studies on flexibility and binding affinity of Asp25 of HIV-1 protease mutants

We have investigated and highlighted the behavior of binding residue, Asp25 by computational analysis, which play an important role in understanding docking process with drug molecule, Ritonavir (Norvir^®) and the flexibility nature of the Human Immunodeficiency Virus-1 (HIV-1) protease enzyme. It is well known that Ritonavir is a potent and a selective HIV-1 protease inhibitor. Molecular dockings were performed in order to gain insights regarding the binding mode of this inhibitor. In our analysis, we observed Ritonavir had different rank orders of scores against different mutant of this enzyme. Asp25 of the enzyme was found to be the active site for all the mutants. The results clearly suggest that Ritonavir is not able to appropriately bind at the active site of each HIV-1 protease mutant due to RMSD difference of the amino acid (Asp) at the position 25 of all mutants. These findings support the concept that 3D space of active site is a qualitative assessment for binding affinity of inhibitor with an enzyme. The investigation on the flexibility nature of Asp25 by normal mode analysis, show that binding residue posses less flexibility due to its solvation potential. The overall analysis of our study brings clarity to the binding behavior with respect to the different mutants with Ritonavir on the basis RMSD and also on the flexible nature of HIV-1 protease enzyme with respect to Asp25 position.     

结合分子相似性、药效团和分子对接筛选新的HIV-1蛋白酶抑制剂

结合分子相似性、药效团和分子对接建立兼顾计算效率和预测准确度的HIV-1蛋白酶抑制剂筛选方法。首先通过对现有HIV-1蛋白酶抑制剂分子进行相似性分析,选取代表性的HIV-1蛋白酶抑制剂作为模板分子,构建和优化药效团模型,并从1万个化合物中优先筛选出500个化合物。而后采用分子对接方法进一步考察化合物与HIV-1蛋白酶结合情况,得到4个新的活性候选化合物,并进行其结合自由能计算和抗突变性分析。结果表明新候选化合物ST025723和HIV-1蛋白酶表现出较好的相互作用和抗突变性,具有深入研究的价值,同时也证明分子相似性、药效团和分子对接相结合能够快速有效地发现新颖活性候选化合物。     

Structural evidence for effectiveness of darunavir and two related antiviral inhibitors against HIV-2 protease

No drug has been targeted specifically for HIV-2 (human immunodeficiency virus type 2) infection despite its increasing prevalence worldwide. The antiviral HIV-1 (human immunodeficiency virus type 1) protease (PR) inhibitor darunavir and the chemically related GRL98065 and GRL06579A were designed with the same chemical scaffold and different substituents at P2 and P2′ to optimize polar interactions for HIV-1 PR (PR1). These inhibitors are also effective antiviral agents for HIV-2-infected cells. Therefore, crystal structures of HIV-2 PR (PR2) complexes with the three inhibitors have been solved at 1.2-Å resolution to analyze the molecular basis for their antiviral potency. Unusually, the crystals were grown in imidazole and zinc acetate buffer, which formed interactions with the PR2 and the inhibitors. Overall, the structures were very similar to the corresponding inhibitor complexes of PR1 with an RMSD of 1.1 Å on main-chain atoms. Most hydrogen-bond and weaker C-H…O interactions with inhibitors were conserved in the PR2 and PR1 complexes, except for small changes in interactions with water or disordered side chains. Small differences were observed in the hydrophobic contacts for the darunavir complexes, in agreement with relative inhibition of the two PRs. These near-atomic-resolution crystal structures verify the inhibitor potency for PR1 and PR2 and will provide the basis for the development of antiviral inhibitors targeting PR2.     

Ligand modifications to reduce the relative resistance of multi-drug resistant HIV-1 protease

Proper proteolytic processing of the HIV-1 Gag/Pol polyprotein is required for HIV infection and viral replication. This feature has made HIV-1 protease an attractive target for antiretroviral drug design for the treatment of HIV-1 infected patients. To examine the role of the P1 and P1′positions of the substrate in inhibitory efficacy of multi-drug resistant HIV-1 protease 769 (MDR 769), we performed a series of structure–function studies. Using the original CA/p2 cleavage site sequence, we generated heptapeptides containing one reduced peptide bond with an L to F and A to F double mutation at P1 and P1′ (F-r-F), and an A to F at P1′ (L-r-F) resulting in P1/P1′ modified ligands. Here, we present an analysis of co-crystal structures of CA/p2 F-r-F, and CA/p2 L-r-F in complex with MDR 769. To examine conformational changes in the complex structure, molecular dynamic (MD) simulations were performed with MDR769–ligand complexes. MD trajectories show the isobutyl group of both the lopinavir analog and the CA/p2 L-r-F substrate cause a conformational change of in the active site of MDR 769. IC₅₀ measurements suggest the non identical P1/P1′ ligands (CA/p2 L-r-F and lopinavir analog) are more effective against MDR proteases as opposed to identical P1/P1′ligands. Our results suggest that a non identical P1/P1′composition may be more favorable for the inhibition of MDR 769 as they induce conformational changes in the active site of the enzyme resulting in disruption of the two-fold symmetry of the protease, thus, stabilizing the inhibitor in the active site.     

HIV-1 protease regulation: The role of the major homology region and adjacent C-terminal capsid sequences

The maturation of human immunodeficiency type-1 virions is accomplished through the proteolytic processing of Gag and GagPol precursor proteins by the viral protease (PR). Since virions must be assembled at the cell surface from uncleaved precursor molecules, intracellular activation of PR must be inhibited. We have previously developed a system where the intracellular activity of PR, associated with GagPol, was inhibited by the expression of Gagin trans. The disproportionate synthesis of Gag inhibits the activation of PR in the cytoplasm. Sequences capable of mediating this inhibition were localized to capsid. In this communication, the region of HIV-1 capsid capable of mediating inhibition was further defined and shown to require the major homology region of capsid within Gag.     

Exploration of the effects of sequence variations between HIV-1 and HIV-2 proteases on their three-dimensional structures

Abstract

HIV protease inhibitors (PIs) approved by the FDA (US Food and Drug Administration) are a major class of antiretroviral. HIV-2 protease (PR2) is naturally resistant to most of them as PIs were designed for HIV-1 protease (PR1). In this study, we explored the impact of amino-acid substitutions between PR1 and PR2 on the structure of protease (PR) by comparing the structural variability of 13 regions using 24 PR1 and PR2 structures complexed with diverse ligands. Our analyses confirmed structural rigidity of the catalytic region and highlighted the important role of three regions in the conservation of the catalytic region conformation. Surprisingly, we showed that the flap region, corresponding to a flexible region, exhibits similar conformations in PR1 and PR2. Furthermore, we identified regions exhibiting different conformations in PR1 and PR2, which could be explained by the intrinsic flexibility of these regions, by crystal packing, or by PR1 and PR2 substitutions. Some substitutions induce structural changes in the R2 and R4 regions that could have an impact on the properties of PI-binding site and could thus modify PI binding mode. Substitutions involved in structural changes in the elbow region could alter the flexibility of the PR2 flap regions relative to PR1, and thus play a role in the transition from the semi-open form to the closed form, and have an impact on ligand binding. These results improve the understanding of the impact of sequence variations between PR1 and PR2 on the natural resistance of HIV-2 to commercially available PIs.

Communicated by Ramaswamy H. Sarma     

Role of conformational fluctuations in the enzymatic reaction of HIV-1 protease

The emergence of compensatory drug-resistant mutations in HIV-1 protease challenges the common view of the reaction mechanism of this enzyme. Here, we address this issue by performing classical and ab initio molecular dynamics simulations (MD) on a complex between the enzyme and a peptide substrate. The classical MD calculation reveals large-scale protein motions involving the flaps and the cantilever. These motions modulate the conformational properties of the substrate at the cleavage site. The ab initio calculations show in turn that substrate motion modulates the activation free energy barrier of the enzymatic reaction dramatically. Thus, the catalytic power of the enzyme does not arise from the presence of a pre-organized active site but from the protein mechanical fluctuations. The implications of this finding for the emergence of drug-resistance are discussed.