Folding intermediates of a model three-helix bundle protein. Pressure and cold denaturation studies

The stability and equilibrium unfolding of a model three-helix bundle protein, alpha(3)-1, by guanidine hydrochloride (GdnHCl), hydrostatic pressure, and temperature have been investigated. The combined use of these denaturing agents allowed detection of two partially folded states of alpha(3)-1, as monitored by circular dichroism, intrinsic fluorescence emission, and fluorescence of the hydrophobic probe bis-ANS (4,4'-dianilino-1,1'-binaphthyl-5,5'-disulfonic acid). The overall free-energy change for complete unfolding of alpha(3)-1, determined from GdnHCl unfolding data, is +4.6 kcal/mol. The native state is stabilized by -1.4 kcal/mol relative to a partially folded pressure-denatured intermediate (I(1)). Cold denaturation at high pressure gives rise to a second partially (un)folded conformation (I(2)), suggesting a significant contribution of hydrophobic interactions to the stability of alpha(3)-1. The free energy of stabilization of the native-like state relative to I(2) is evaluated to be -2.5 kcal/mol. Bis-ANS binding to the pressure- and cold-denatured states indicates the existence of significant residual hydrophobic structure in the partially (un)folded states of alpha(3)-1. The demonstration of folding intermediates of alpha(3)-1 lends experimental support to a number of recent protein folding simulation studies of other three-helix bundle proteins that predicted the existence of such intermediates. The results are discussed in terms of the significance of de novo designed proteins for protein folding studies.     

Equilibrium unfolding of dimeric and engineered monomeric forms of lambda Cro (F58W) repressor and the effect of added salts: evidence for the formation of folded monomer induced by sodium perchlorate

The equilibrium unfolding transitions of Cro repressor variants, dimeric variant Cro F58W and monomer Cro K56[DGEVK]F58W, have been studied by urea and guanidine hydrochloride to probe the folding mechanism. The unfolding transitions of a dimeric variant are well described by a two state process involving native dimer and unfolded monomer with a free energy of unfolding, DeltaG(0,un)(0), of approximately 10-11 kcal/mol. The midpoint of transition curves is dependent on total protein concentration and DeltaG(0,un)(0) is independent of protein concentration, as expected for this model. Unfolding of Cro monomer is well described by the standard two state model. The stability of both forms of protein increases in the presence of salt but decreases with the decrease in pH. Because of the suggested importance of a N2<-->2F dimerization process in DNA binding, we have also studied the effect of sodium perchlorate, containing the chaotropic perchlorate anion, on the conformational transition of Cro dimer by CD, fluorescence and NMR (in addition to urea and guanidine hydrochloride) in an attempt both to characterize the thermodynamics of the process and to identify conditions that lead to an increase in the population of the folded monomers. Data suggest that sodium perchlorate stabilizes the protein at low concentration (<1.5 M) and destabilizes the protein at higher perchlorate concentration with the formation of a "significantly folded" monomer. The tryptophan residue in the "significantly folded" monomer induced by perchlorate is more exposed to the solvent than in native dimer.     

Closing the gate to the active site: effect of the inhibitor methoxyarachidonyl fluorophosphonate on the conformation and membrane binding of fatty acid amide hydrolase

Fatty acid amide hydrolase (FAAH) is a dimeric, membranebound enzyme that degrades neuromodulatory fatty acid amides and esters and is expressed in mammalian brain and peripheral tissues. The cleavage of approximately 30 amino acids from each subunit creates an FAAH variant that is soluble and homogeneous in detergent-containing buffers, opening the avenue to the in vitro mechanistic and structural studies. Here we have studied the stability of FAAH as a function of guanidinium hydrochloride concentration and of hydrostatic pressure. The unfolding transition was observed to be complex and required a fitting procedure based on a three-state process with a monomeric intermediate. The first transition was characterized by dimer dissociation, with a free energy change of approximately 11 kcal/mol that accounted for approximately 80% of the total stabilization energy. This process was also paralleled by a large change in the solvent-accessible surface area, because of the hydration occurring both at the dimeric interface and within the monomers. As a consequence, the isolated subunits were found to be much less stable (DeltaG approximately 3 kcal/mol). The addition of methoxyarachidonyl fluorophosphonate, an irreversible inhibitor of FAAH activity, enhanced the stability of the dimer by approximately 2 kcal/mol, toward denaturant- and pressure-induced unfolding. FAAH inhibition by methoxyarachidonyl fluorophosphonate also reduced the ability of the protein to bind to the membranes. These findings suggest that local conformational changes at the level of the active site might induce a tighter interaction between the subunits of FAAH, affecting the enzymatic activity and the interaction with membranes.     

Selective neoglycosylation increases the structural stability of vicilin, the 7S storage globulin from pea seeds

The effects of glycosylation on the stability and subunit interactions of vicilin, the major storage protein in pea seeds, were investigated. Glycosylated vicilin derivatives were prepared by alkylation of lysine epsilon-amino groups with various carbohydrates. Average modification levels of 13.4 +/- 3.0, 11.1 +/- 3.6, 7.5 +/- 4.2, and 4.7 +/- 0.3 moles of carbohydrate/mol of vicilin were obtained with glucose, galactose, galacturonic acid, and lactose, respectively. Nondenaturing polyacrylamide gel electrophoresis and size-exclusion chromatography indicated that the quaternary structure and hydrodynamic radius of vicilin were not affected by glycosylation at the levels used. We have previously shown that application of hydrostatic pressure causes dissociation of vicilin subunits [C. Pedrosa and S. T. Ferreira (1994) Biochemistry 33, 4046-4055]. Analysis of pressure dissociation data allowed determination of the Gibbs free energy change (deltaG(diss)) and molar volume change (deltaV(diss)) of dissociation of vicilin subunits. For unmodified vicilin, deltaG(diss) = 18.2 kcal/mol and deltaV(diss) = -102 ml/mol. Glycosylated vicilin derivatives were significantly stabilized against subunit dissociation, with deltaG(diss) of 19.4, 19.2, 20.6, and 22.1 kcal/mol for glucose, galactose, lactose, and galacturonic acid derivatives, respectively. No changes in deltaV(diss) were found for the glucose and galactose derivatives, whereas deltaV(diss) of -128 and -135 ml/mol, respectively, were found for the lactose and galacturonic acid derivatives. The glycosylated derivatives also appeared more resistant to unfolding by guanidine hydrochloride than unmodified vicilin. Intrinsic fluorescence lifetime measurements showed that glycosylation caused a significant increase in heterogeneity of the fluorescence decay, possibly reflecting increased conformational heterogeneity of glycosylated derivatives relative to unmodified vicilin. These results indicate that the stability and subunit interactions of vicilin may be modulated by mild, selective glycosylation at low modification levels, an effect that may be of interest in the study of other oligomeric proteins.     

Dimeric procaspase-3 unfolds via a four-state equilibrium process.

We have examined the folding and assembly of a catalytically inactive mutant of procaspase-3, a homodimeric protein that belongs to the caspase family of proteases. The caspase family, and especially caspase-3, is integral to apoptosis. The equilibrium unfolding data demonstrate a plateau between 3 and 5 M urea, consistent with an apparent three-state unfolding process. However, the midpoint of the second transition as well as the amplitude of the plateau are dependent on the protein concentration. Overall, the data are well described by a four-state equilibrium model in which the native dimer undergoes an isomeration to a dimeric intermediate, and the dimeric intermediate dissociates to a monomeric intermediate, which then unfolds. By fitting the four-state model to the experimental data, we have determined the free energy change for the first step of unfolding to be 8.3 +/- 1.3 kcal/mol. The free energy change for the dissociation of the dimeric folding intermediate to two monomeric intermediates is 10.5 +/- 1 kcal/mol. The third step in the unfolding mechanism represents the complete unfolding of the monomeric intermediate, with a free energy change of 7.0 +/- 0.5 kcal/mol. These results show two important points. First, dimerization of procaspase-3 occurs as a result of the association of two monomeric folding intermediates, demonstrating that procaspase-3 dimerization is a folding event. Second, the stability of the dimer contributes significantly to the conformational free energy of the protein (18.8 of 25.8 kcal/mol).     

Equilibrium unfolding of dimeric desulfoferrodoxin involves a monomeric intermediate: iron cofactors dissociate after polypeptide unfolding

Here we report the conformational stability of homodimeric desulfoferrodoxin (dfx) from Desulfovibrio desulfuricans (ATCC 27774). The dimer is formed by two dfx monomers linked through beta-strand interactions in two domains; in addition, each monomer contains two different iron centers: one Fe-(S-Cys)(4) center and one Fe-[S-Cys+(N-His)(4)] center. The dissociation constant for dfx was determined to be 1 microM (DeltaG = 34 kJ/mol of dimer) from the concentration dependence of aromatic residue emission. Upon addition of the chemical denaturant guanidine hydrochloride (GuHCl) to dfx, a reversible fluorescence change occurred at 2-3 M GuHCl. This transition was dependent upon protein concentration, in accord with a dimer to monomer reaction [DeltaG(H(2)O) = 46 kJ/mol of dimer]. The secondary structure did not disappear, according to far-UV circular dichroism (CD), until 6 M GuHCl was added; this transition was reversible (for incubation times of < 1 h) and independent of dfx concentration [DeltaG(H(2)O) = 50 kJ/mol of monomer]. Thus, dfx equilibrium unfolding is at least three-state, involving a monomeric intermediate with native-like secondary structure. Only after complete polypeptide unfolding (and incubation times of > 1 h) did the iron centers dissociate, as monitored by disappearance of ligand-to-metal charge transfer absorption, fluorescence of an iron indicator, and reactivity of cysteines to Ellman's reagent. Iron dissociation took place over several hours and resulted in an irreversibly denatured dfx. It appears as if the presence of the iron centers, the amino acid composition, and, to a lesser extent, the dimeric structure are factors that aid in facilitating dfx's unusually high thermodynamic stability for a mesophilic protein.     

Physico-chemical properties of molten dimer ascorbate oxidase

The possible presence of dimeric unfolding intermediates might offer a clue to understanding the relationship between tertiary and quaternary structure formation in dimers. Ascorbate oxidase is a large dimeric enzyme that displays such an intermediate along its unfolding pathway. In this study the combined effect of high pressure and denaturing agents gave new insight on this intermediate and on the mechanism of its formation. The transition from native dimer to the dimeric intermediate is characterized by the release of copper ions forming the tri-nuclear copper center located at the interface between domain 2 and 3 of each subunit. This transition, which is pH-dependent, is accompanied by a decrease in volume, probably associated to electrostriction due to the loosening of intra-subunit electrostatic interactions. The dimeric species is present even at 3 x 10(8) Pa, providing evidence that mechanically or chemically induced unfolding lead to a similar intermediate state. Instead, dissociation occurs with an extremely large and negative volume change (DeltaV approximately -200 mL.mol(-1)) by pressurization in the presence of moderate amounts of denaturant. This volume change can be ascribed to the elimination of voids at the subunit interface. Furthermore, the combination of guanidine and high pressure uncovers the presence of a marginally stable (DeltaG approximately 2 kcal.mol(-1)) monomeric species (which was not observed in previous equilibrium unfolding measurements) that might be populated in the early folding steps of ascorbate oxidase. These findings provide new aspects of the protein folding pathway, further supporting the important role of quaternary interactions in the folding strategy of large dimeric enzymes.     

The effect of pressure and guanidine hydrochloride on azurins mutated in the hydrophobic core.

The unfolding of the blue-copper protein azurin from Pseudomonas aeruginosa by guanidine hydrochloride, under nonreducing conditions, has been studied by fluorescence techniques and circular dichroism. The denaturation transition may be fitted by a simple two-state model. The total free energy change from the native to the unfolded state was 9.4 +/- 0.4 kcal.mol-1, while a lower value (6.4 +/- 0.4 kcal.mol-1) was obtained for the metal depleted enzyme (apo-azurin) suggesting that the copper atom plays an important stabilization role. Azurin and apo-azurin were practically unaffected by hydrostatic pressure up to 3000 bar. Site-directed mutagenesis has been used to destabilize the hydrophobic core of azurin. In particular either hydrophobic residue Ile7 or Phe110 has been substituted with a serine. The free energy change of unfolding by guanidinium hydrochloride, resulted to be 5.8 +/- 0.3 kcal.mol-1 and 4.8 +/- 0.3 kcal.mol-1 for Ile7Ser and Phe110Ser, respectively, showing that both mutants are much less stable than the wild-type protein. The mutated apoproteins could be reversible denatured even by high pressure, as demonstrated by steady-state fluorescence measurements. The change in volume associated to the pressure-induced unfolding was estimated to be -24 mL.mol-1 for Ile7Ser and -55 mL.mol-1 for Phe110Ser. These results show that the tight packing of the hydrophobic residues that characterize the inner structure of azurin is fundamental for the protein stability. This suggests that the proper assembly of the hydrophobic core is one of the earliest and most crucial event in the folding process, bearing important implication for de novo design of proteins.     

Porcine beta-lactoglobulin chemical unfolding: identification of a non-native alpha-helical intermediate

The chemical unfolding behavior of porcine beta-lactoglobulin (PLG) has been followed at pH 2 and 6 in the presence of guanidinium hydrochloride. The PLG unfolding transition, monitored by tryptophan fluorescence, far and near UV circular dichroism and 1D-NMR, can be described by a three-state transition suggesting the presence of at least one intermediate state that appears to display an excess of non-native alpha-helical structures. The thermodynamic parameters, as determined through a global analysis fitting procedure, give estimates of the free energy differences of the transitions connecting the native, the intermediate and the unfolded state: DeltaG(NI) (0) = 2.8 +/- 0.7 kcal mol(-1) (pH 2) and 4.2 +/- 0.5 kcal mol(-1) (pH 6) and DeltaG(NU) (0) = 7.2 +/- 0.6 kcal mol(-1) (pH 2) and 6.9 +/- 0.6 kcal mol(-1) (pH 6). CD unfolding data of the bovine species (BLG) have been collected here under the same experimental conditions of PLG to allow a careful comparison of the two beta-lactoglobulins. Intermediates with different characteristics have been identified for BLG and PLG, and their nature has been discussed on a structural analysis basis. The thermodynamic data reported here for PLG and BLG and the comparative analysis with data reported for equine beta lactoglobulin, show that homologous beta-barrel proteins, belonging to the same family and displaying high sequence identity (52-64%) populate unfolding intermediates to different extents, even though a common tendency to the formation of non-native alpha-helical intermediates, can be envisaged. The present results provide a prerequisite foundation of knowledge for the design and interpretation of future folding kinetic studies.     

The 4,4'-dipyridyl disulfide-induced formation of GroEL monomers is cooperative and leads to increased hydrophobic exposure

The molecular chaperone, GroEL, is completely disassembled into monomers by the addition of 4,4'-dipyridyl disulfide. The dissociation leads to monomers in a kinetically controlled process. The additions of functional ligands of GroEL such as Mg(2+) or adenine nucleotides produced differences in the observed rates, but at the end of the kinetics, the dissociation was complete. In addition to the information obtained from native gels, the fluorescent probe bis-ANS was utilized to follow the monomer formation. The results demonstrate that the formation of monomers was associated with the exposure of hydrophobic surfaces. This assessment was possible without the use of added chaotropes, such as urea, to dissociate GroEL. Dissociation kinetics were also followed by light scattering. The kinetics of dissociation of the 14mer are cooperative with respect to the concentration of 4,4'-DPDS. Thermodynamic parameters for the kinetic process gave a free energy of activation (DeltaG) of 19.3 +/- 1.2 kcal mol(-1), which was decomposed to an enthalpy of activation (DeltaH) of 19.30 +/- 1.2 kcal mol(-1) and an entropy of activation (DeltaS) of -8.2 +/- 3.9 cal mol(-1) K(-1). We conclude that the dissociation of GroEL observed in this investigation is an enthalpy-controlled process.     

Protein stabilization by urea and guanidine hydrochloride

The urea, guanidine hydrochloride, salt, and temperature dependence of the rate of dissociation of CO from a nonequilibrium state of CO-bound native ferrocytochrome c has been studied at pH 7. The heme iron of ferrocytochrome c in the presence of denaturing concentrations of guanidine hydrochloride (GdnHCl) and urea prepared in 0.1 M phosphate, pH 7, binds CO. When the unfolded protein solution is diluted 101-fold into CO-free folding buffer, the protein chain refolds completely, leaving the CO molecule bonded to the heme iron. Subsequently, slow thermal dissociation of the CO molecule yields to the heme coordination of the native M80 ligand. Thus, the reaction monitors the rate of thermal conversion of the CO-liganded native ferrocytochrome c to the M80-liganded native protein. The rate of this reaction, k(diss), shows a characteristic dependence on the presence of nondenaturing concentrations of the denaturants in the reaction medium. The rate decreases by approximately 1.9-3-fold as the concentration of GdnHCl in the refolding medium increases from nearly 0 to approximately 2.1 M. Similarly, the rate decreases by 1.8-fold as the urea concentration is raised from 0.l to approximately 5 M. At still higher concentrations of the denaturants the denaturing effect sets in, the protein is destabilized, and hence the CO dissociation rate increases sharply. The activation energy of the reaction, E(a), increases when the denaturant concentration in the reaction medium is raised: from 24.1 to 28.3 kcal mol(-1) for a 0.05-2.1 M rise in GdnHCl and from 25.2 to 26.9 kcal mol(-1) for a 0.1-26.9 M increase in urea. Corresponding to these increases in denaturant concentrations are also increases in the activation entropy, S(diss)/R, where R is the gas constant of the reaction. The denaturant dependence of these kinetic and thermodynamic parameters of the CO dissociation reaction suggests that binding interactions with GdnHCl and urea can increase the structural and energetic stability of ferrocytochrome c up to the limit of the subdenaturing concentrations of the additives. NaCl and Na(2)SO(4), which stabilize proteins through their salting-in effect, also decrease the rate with a corresponding increase in activation entropy of CO dissociation from CO-bound native ferrocytochrome c, lending support to the view that low concentrations of GdnHCl and urea stabilize proteins. These results have direct relevance to the understanding and interpretation of the free energy-denaturant relationship and protein folding chevrons.     

Extreme free energy of stabilization of Taq DNA polymerase

We have examined the chemical denaturations of the Klentaq and Klenow large-fragment domains of the Type 1 DNA polymerases from Thermus aquaticus (Klentaq) and Escherichia coli (Klenow) under identical solution conditions in order to directly compare the stabilization energetics of the two proteins. The high temperature stability of Taq DNA polymerase is common knowledge, and is the basis of its use in the polymerase chain reaction. This study, however, is aimed at understanding the thermodynamic basis for this high-temperature stability. Chemical denaturations with guanidine hydrochloride report a folding free energy (DeltaG) for Klentaq that is over 20 kcal/mol more favorable than that for Klenow under the conditions examined. This difference between the stabilization free energies of a homologous mesophilic-thermophilic protein pair is significantly larger than generally observed. This is due in part to the fact that the stabilization free energy for Klentaq polymerase, at 27.5 kcal/mol, is one of the largest ever determined for a monomeric protein. Large differences in the chemical midpoints of the unfolding (Cm) and the dependences of the unfolding free energy on denaturant concentration in the transition region (m-value) between the two proteins are also observed. Measurements of the sedimentation coefficients of the two proteins in the native and denatured states report that both proteins approximately double in hydrodynamic size upon denaturation, but that Klentaq expands somewhat more than Klenow.     

Conformational stability of dimeric proteins: quantitative studies by equilibrium denaturation.

The conformational stability of dimeric globular proteins can be measured by equilibrium denaturation studies in solvents such as guanidine hydrochloride or urea. Many dimeric proteins denature with a 2-state equilibrium transition, whereas others have stable intermediates in the process. For those proteins showing a single transition of native dimer to denatured monomer, the conformational stabilities, delta Gu (H2O), range from 10 to 27 kcal/mol, which is significantly greater than the conformational stability found for monomeric proteins. The relative contribution of quaternary interactions to the overall stability of the dimer can be estimated by comparing delta Gu (H2O) from equilibrium denaturation studies to the free energy associated with simple dissociation in the absence of denaturant. In many cases the large stabilization energy of dimers is primarily due to the intersubunit interactions and thus gives a rationale for the formation of oligomers. The magnitude of the conformational stability is related to the size of the polypeptide in the subunit and depends upon the type of structure in the subunit interface. The practical use, interpretation, and utility of estimation of conformational stability of dimers by equilibrium denaturation methods are discussed.     

Thermodynamic analysis of unfolding and dissociation in lactose repressor protein.

Lactose repressor protein, regulator of lac enzyme expression in Escherichia coli, maintains its structure and function at extremely low protein concentrations (<10(-)12 M). To examine the unfolding and dissociation of this tetrameric protein, structural transitions in the presence of varying concentrations of urea were monitored by fluorescence and circular dichroism spectroscopy, analytical ultracentrifugation, and functional activities. The spectroscopic data demonstrated a single cooperative transition with no evidence of folded dimeric or monomeric species of this protein. These spectroscopic transitions were reversible provided a long incubation step was employed in the refolding reaction at approximately 3 M urea. The refolded repressor protein possessed the same functional and structural properties as wild-type repressor protein. The absence of concentration dependence expected for tetramer dissociation to unfolded monomer (M4 <--> 4U) in the spectral transitions indicates that the disruption of the monomer-monomer interface and monomer unfolding are a concerted reaction (M4 <--> U4) that may occur prior to the dissociation of the dimer-dimer interface. Thus, we propose that the unfolded monomers remain associated at the C-terminus by the 4-helical coiled-coil structure that forms the dimer-dimer interface and that this intermediate is the end point detected in the spectral transitions. Efforts to confirm the existence of this species by ultracentrifugation were inhibited by the aggregation of this intermediate. Based upon these observations, the wild-type fluorescence and CD data were fit to a model, M4 <--> U4, which resulted in an overall DeltaG degrees for unfolding of 40 kcal/mol. Using a mutant protein, K84L, in which the monomer-monomer interface is stabilized, sedimentation equilibrium results demonstrated that the dimer-dimer interface of lac repressor could persist at higher levels of urea than the monomer-monomer interface. The tetramer-dimer transition monitored using this mutant repressor yields a DeltaG degrees of 20.4 kcal/mol. Using this free energy value for the dissociation process of U4 <--> 4U, an overall free energy change of approximately 60 kcal/mol was calculated for dissociation of all interfaces and unfolding of the tetrameric lac repressor, reflecting the exceptional stability of this protein.     

Fluorescence and conformational stability studies of Staphylococcus nuclease and its mutants, including the less stable nuclease-concanavalin A hybrids

We report steady-state and time-resolved fluorescence studies with the single tryptophan protein, Staphylococcus aureus A, and several of its site-directed mutants. A couple of these mutants, nuclease-conA and nuclease-conA-S28G (which are hybrid proteins containing a six amino acid beta-turn substitute from concanavalin A), are found to have a much lower thermodynamic stability than the wild type. The thermal transition temperatures for nuclease-conA and S28G are 32.8 and 30.5 degrees C, which are about 20 degrees C lower than the Tm for wild-type nuclease A. These mutant proteins also are denatured by a much lower concentration of the denaturants urea and guanidine hydrochloride. We also show that an unfolding transition in the structure of the nuclease-conA hybrids can be induced by relatively low hydrostatic pressure (approximately 700 bar). The free energy for unfolding of nuclease-conA (and nuclease-conA-S28G) is found to be only 1.4 kcal/mol (and 1.2 kcal/mol) by thermal, urea, guanidine hydrochloride, and pressure unfolding. Time-resolved fluorescence intensity and anisotropy measurements with nuclease-conA-S28G show the temperature-, urea-, and pressure-perturbed states each to have a reduced average intensity decay time and to depolarize with a rotational correlation time of approximately 1.0 ns (as compared to a rotational correlation time of 11 ns for the native form of nuclease-conA-S28G at 20 degrees C).     

Rate-determining folding and association reactions on the reconstitution pathway of porcine skeletal muscle lactic dehydrogenase after denaturation by guanidine hydrochloride

Reactivation of tetrameric porcine skeletal muscle lactic dehydrogenase after dissociation and extensive unfolding of the monomers by 6 M guanidine hydrochloride (Gdn . HCl) is characterized by sigmoidal kinetics, indicating a complex mechanism involving rate-limiting folding and association steps. For analysis of the association reactions, chemical cross-linking with glutaraldehyde may be used [Hermann, R., Jaenicke, R., & Rudolph, R. (1981) Biochemistry 20, 2195-2201]. The data clearly show that the formation of a dimeric intermediate is determined by a first-order folding reaction of the monomers with k1 = (8.0 +/- 0.1) x 10(-4) s-1. The rate constant of the association of dimers to tetramers which represents the second rate-limiting step on the pathway of reconstitution after guanidine denaturation, was then determined by reactivation and cross-linking experiments after dissociation in 0.1 M H3PO4 containing 1 M Na2SO4. The rate constant for the dimer association (which is the only rate-limiting step after acid dissociation) was k2 = (3.0 +/- 0.5) x 10(4) M-1 s-1. On the basis of the given two rate constants, the complete reassociation pattern of porcine lactic dehydrogenase after dissociation and denaturation in 6 M Gdn . HCl can be described by the kinetic model (formula: see text).     

Free energy changes in denaturation of ribonuclease A by mixed denaturants. Effects of combinations of guanidine hydrochloride and one of the denaturants lithium bromide, lithium chloride, and sodium bromide

The denaturation of ribonuclease A by guanidine hydrochloride, lithium bromide, and lithium chloride and by mixed denaturants consisting of guanidine hydrochloride and one of the denaturants lithium chloride, lithium bromide, and sodium bromide was followed by difference spectral measurements at pH 4.8 and 25 degrees C. Both components of mixed denaturant systems enhance each other's effect in unfolding the protein. The effect of lithium bromide on the midpoint of guanidine hydrochloride denaturation transition is approximately the sum of the effects of the constituent ions. For all the mixed denaturants tested, the dependence of the free energy change on denaturation is linear. The conformational free energy associated with the guanidine hydrochloride denaturation transition in water is 7.5 +/- 0.1 kcal mol-1, and it is unchanged in the presence of low concentrations of lithium bromide, lithium chloride, and sodium bromide which by themselves are not concentrated enough to unfold the protein. The conformational free energy associated with the lithium bromide denaturation transition in water is 11.7 +/- 0.3 kcal mol-1, and it is not affected by the presence of low concentrations of guanidine hydrochloride which by themselves do not disrupt the structure of native ribonuclease A.     

Activation Parameters for the Spontaneous and Pressure-Induced Phases of the Dissociation of Single-Ring GroEL (SR1) Chaperonin

We investigated the dissociation of single-ring heptameric GroEL (SR1) by high hydrostatic pressure in the range 0.5-3.0 kbar. The kinetics were studied as a function of temperature in the range 15-35 degrees C. The dissociation processes at each pressure and temperature showed biphasic behavior. The slower rate (k1,obs) was confirmed to be the self-dissociation of SR1 at any specific temperature at atmospheric pressure. This dissociation was pressure independent and followed concentration-dependent first-order kinetics. The self-dissociation rates followed normal Eyring plots (In k1,obs/T vs. 1/T) from which the free energy of activation (deltaG++ = 22 +/- 0.3 kcal mol(-1)), enthalpy of activation (deltaH++ = 18 +/- 0.5 kcal mol(-1)), and entropy of activation (deltaS++ = -15 +/- 1 kcal mol(-1)) were evaluated. The effect of pressure on the dissociation rates resulted in nonlinear behavior (ln k2,obs vs. pressure) at all the temperatures studied indicating that the activation volumes were pressure dependent. Activation volumes at zero pressure (V++o) and compressibility factors (beta++) for the dissociation rates at the specific temperatures were calculated. This is the first systematic study where the self-dissociation of an oligomeric chaperonin as well as its activation parameters are reported.     

SecA folds via a dimeric intermediate

Though many proteins in the cell are large and multimeric, their folding has not been extensively studied. We have chosen SecA as a folding model because it is a large, homodimeric protein (monomer molecular mass of 102 kDa) with multiple folding domains. SecA is the ATPase for the Sec-dependent preprotein translocase of many bacteria. SecA is a soluble protein that can penetrate into the membrane during preprotein translocation. Because SecA may partially unfold prior to its insertion into the membrane, studies of its stability and folding pathway are important for understanding how it functions in vivo. Kinetic folding transitions in the presence of urea were monitored using circular dichroism and tryptophan fluorescence, while equilibrium folding transitions were monitored using the same techniques as well as a fluorescent ATP analogue. The reversible equilibrium folding transition exhibited a plateau, indicating the presence of an intermediate. Based on the data presented here, we propose a three-state model, N(2) if I(2) if 2U, where the native protein unfolds to a dimeric intermediate which then dissociates into two unfolded monomers. The SecA dimer was determined to have an overall stability (DeltaG) of -22.5 kcal/mol. We also investigated the stability of SecA using analytical ultracentrifugation equilibrium and velocity sedimentation, which again indicated that native or refolded SecA was a stable dimer. The rate-limiting step in the folding pathway was conversion of the dimeric intermediate to the native dimer. Unfolding of native, dimeric SecA was slow with a relaxation time in H(2)O of 3.3 x 10(4) s. Since SecA is a stable dimer, dissociation to monomeric subunits during translocation is unlikely.