Knowledge and attitude of elderly persons towards dental implants

doi: 10.1111/j.1741‐2358.2011.00586.x Knowledge and attitude of elderly persons towards dental implants Background: Despite their unrivalled place in restorative treatment, dental implants are still scarcely used in elderly patients. Introduction: The aim of this survey was therefore to identify potential barriers for accepting an implant treatment. Materials and methods: Participants were recruited from a geriatric hospital, two long‐term‐care facilities and a private clinic. The final study sample comprised 92 persons, 61 women and 31 men with an average age of 81.2 ± 8.0 years. In a semi‐structured interview, the participants’ knowledge of implants and attitude towards a hypothetical treatment with dental implants were evaluated. Results: Twenty‐seven participants had never heard of dental implants, and another 13 participants could not describe them. The strongest apprehensions against implants were cost, lack of perceived necessity and old age. Univariate and multiple linear regression analysis identified being women, type and quality of denture, having little knowledge on implants and being hospitalised as the risk factors for refusing implants. However, old age as such was not associated with a negative attitude. Conclusion: The acceptance of dental implants in the elderly population might be increased by providing further information and promoting oral health in general. Regardless of the age, dental implants should be placed when patients are still in good health and live independently.     

Prosthetic rehabilitation of a patient with mandibular resection prosthesis using mini dental implants (MDIs)--case report

Physical disfigurement and functional impairments associated with facial trauma are a challenge to a prosthodontist, because even novel sophisticated surgical reconstructive techniques fail to provide adequate support for dental resection prosthesis. Therefore, different endosseous implants are often used as prosthesis-supporting elements. Manufacturers of dental implants have recently presented mini dental implants (MDIs) with diameter of only 1.8-2.4 mm. These implants allow very suitable prosthetic solutions within the range of their indications due to good osseointegration success rates, simple surgical technique, and immediate loading possibility. In this report, a case was presented for prosthetic rehabilitation including implantation of two Sendax type (IMTEC, Ardmore, Oklahoma, USA) MDIs in mental region, to obtain better retention and stability of the mandibular resection prosthesis and to improve function, phonation and aesthetics. The use of these implants, among aforementioned preferences, is also very cost-effective, so this implantation possibility should be taken into consideration during prosthetic treatment planning.     

An eye for a tooth

Objective: To propose a possible link between dental extraction and intra‐ocular complications. Background: Several publications in medical literature describe intra‐ocular complications after different dental procedures. Results: Retinal detachment and vitreous hemorrhage following dental extraction with an appropriate anesthesia. Conclusion: Systemic complications following dental treatments should not be neglected and proper medical treatment must be provided as soon as possible.     

Electrochemical disinfection of dental implants--a proof of concept

Background

Peri-implantitis has gained significant clinical attention in recent years. This disease is an inflammatory reaction to microorganisms around dental implants. Due to the limited accessibility, non-invasive antimicrobial strategies are of high interest. An unexpected approach to implant disinfection may evolve from electrolysis. Given the electrical conductivity of titanium implants, alkalinity or active oxidants can be generated in body fluids. We investigated the use of dental titanium implants as electrodes for the local generation of disinfectants. Our hypothesis was that electrolysis can reduce viable counts of adhering bacteria, and that this reduction should be greater if active oxidative species are generated.

Methodology/Principal Findings

As model systems, dental implants, covered with a mono-species biofilm of Escherichia coli C43, were placed in photographic gelatin prepared with physiological saline. Implants were treated by a continuous current of 0 - 10 mA for 15 minutes. The reduction of viable counts was investigated on cathodes and anodes. In separate experiments, the local change in pH was visualized using color indicators embedded in the gelatin. Oxidative species were qualitatively detected by potassium iodide-starch paper. The in situ generated alkaline environment around cathodic implants caused a reduction of up to 2 orders of magnitude in viable E. coli counts. On anodic implants, in contrast to cathodic counterparts, oxidative species were detected. Here, a current of merely 7.5 mA caused complete kill of the bacteria.

Conclusions/Significance

This laboratory study shows that electrochemical treatment may provide access to a new way to decontaminate dental implants in situ.     

Success of dental implants in elderly people--a literature review

Implant-supported dentures seem particularly appropriate for the predicament of being elderly and becoming edentulous. The aim of this article was to review the literature on success of dental implants in elderly people. The results of two studies suggested that the treatment with implants can be considered safe and predictable for older as well as for younger patients. Three studies found no increased implant failure-rate in patients with a compromised medical status. Four studies revealed high success-rates of dental implants among groups of elderly people. Within the limitations of this review of the literature it can be concluded that old age does not seem to represent a factor of major prognostic significance in treatment with dental implants.     

Contouring of a solid silicone block: a new use for the Shaw scalpel

The use of the Shaw hemostatic scalpel eliminates the frustration and physical fatigue formerly associated with the carving of solid silicone implants from blocks of silicone of all grades. It enables very accurate shaping and saves operating and anesthesia time. The smooth end product may, in many cases, eliminate the need for factory-made implants. This method of shaping silicone block is highly recommended. It is not suggested that the instrument should be purchased for this purpose alone, but if purchase of the scalpel is being considered for other purposes, this may be a significant factor in the decision.     

Soft and hard tissue response to zirconium dioxide dental implants--a clinical study in man

Titanium dental implants have been used successfully in implantology for more than 40 years. Recent research, however, suggests that titanium might have more side effects than previously believed. Zirconia ceramics have been employed in orthopaedic surgery for approximately 30 years and were recently introduced into dentistry as a metal replacement for crown and bridge work as well as implant abutments. Zirconium dioxide has been shown in both in vitro and in vivo studies to have desirable osseointegrative properties. This clinical study shows that dental implants made from zirconia are a feasible alternative to titanium dental implants. In addition to excellent cosmetic results, zirconia implants allow a degree of osseointegration and soft tissue response that is superior to titanium dental implants.     

Extent and location of bone loss at dental implants in patients with peri-implantitis

Peri-implantitis is an infectious disease, which leads to loss of supporting bone around dental implants. To evaluate the extent and location of bone loss, 43 patients with peri-implantitis were examined. The bone loss was clinically measured at the time of dental surgery. Data revealed that 25% of subjects had bone loss associated with all their implants although the majority of the subjects had fewer than 50% of their implants affected by bone loss. A total number of 264 implants were examined and 131 of those had peri-implantitis associated bone loss. The pattern of bone loss at implants varied between and within subjects and location in the jaws. The highest proportion of implants with peri-implantitis was found in the upper jaw and within this group, at implants located in the incisor area of the upper jaw; the lowest was the canine area of the lower jaw. The highest proportion of implants that lost ≥ 2/3 of their bone support was found in the incisor area of the maxilla. We concluded that in the presence of peri-implant inflammation, bone quantity and characteristics may influence the progression of peri-implantitis bone loss at dental implants. We hypothesize that the ability of the bone to withstand occlusal forces will be altered as consequence of the loss of bone at the neck of the implants. To achieve an understanding of the local degradation of bone due to peri-implantitis, we need to analyze the microstructure of the bone as well the cellular biology of the peri-implant inflammation.     

Numerical simulation of the remodelling process of trabecular architecture around dental implants

Dental implants may alter the mechanical environment in the jawbone, thereby causing remodelling and adaptation of the surrounding trabecular bone tissues. To improve the efficacy of dental implant systems, it is necessary to consider the effect of bone remodelling on the performance of the prosthetic systems. In this study, finite element simulations were implemented to predict the evolution of microarchitecture around four implant systems using a previously developed model that combines both adaptive and microdamage-based mechano-sensory mechanisms in bone remodelling process. Changes in the trabecular architecture around dental implants were mainly focused. The simulation results indicate that the orientational and ladder-like architecture around the implants predicted herein is in good agreement with those observed in animal experiments and clinical observations. The proposed algorithms were shown to be effective in simulating the remodelling process of trabecular architecture around dental implant systems. In addition, the architectural features around four typical dental implant systems in alveolar bone were evaluated comparatively.     

Effect of electromagnetic field on bone regeneration around dental implants after immediate placement in the dog mandible: a pilot study

doi: 10.1111/j.1741‐2358.2011.00525.x Effect of electromagnetic field on bone regeneration around dental implants after immediate placement in the dog mandible: a pilot study Background: Accelerating bone healing around dental implants can reduce the long‐term period between the insertion of implants and functional rehabilitation. Objective: This in vivo study evaluated the effect of a constant electromagnetic field (CEF) on bone healing around dental implants in dogs. Materials and methods: Eight dental implants were placed immediately after extraction of the first pre‐molar and molar teeth on the mandible of two male dogs and divided into experimental (CEF) and control groups. A CEF at magnetic intensity of 0.8 mT with a pulse width of 25 μs and frequency of 1.5 MHz was applied on the implants for 20 min per day for 2 weeks. Result and conclusion: After qualitative histological analysis, a small quantity of newly formed bone was observed in the gap between the implant surface and alveolar bone in both groups.     

A graphene/zinc oxide nanocomposite film protects dental implant surfaces against cariogenic Streptococcus mutans

Oral biofilms play a crucial role in the development of dental caries and other periodontal diseases. Streptococcus mutans is one of the primary etiological agents in dental caries. Implant systems are regularly employed to replace missing teeth. Oral biofilms accumulate on these implants and are the chief cause of dental implant failure. In the present study, the potential of graphene/zinc oxide nanocomposite (GZNC) against the cariogenic properties of Streptococcus mutans was explored and the anti-biofilm behaviour of artificial acrylic teeth surfaces coated with GZNC was examined. Acrylic teeth are a good choice for implants as they are low cost, have low density and can resist fracture. Microscopic studies and anti-biofilm assays showed a significant reduction in biofilm in the presence GZNC. GZNC was also found to be nontoxic against HEK-293 (human embryonic kidney cell line). The results indicate the potential of GZNC as an effective coating agent for dental implants by efficiently inhibiting S. mutans biofilms.     

Biomechanical analysis and comparison of 12 dental implant systems using 3D finite element study

Finite element analysis plays an important role in dental implant design. The objective of this study was to show the effect of the overall geometry of dental implants on their biomechanics after implantation. In this study, 12 dental implants, with the same length, diameter and screw design, were simulated from different implant systems. Numerical model of right mandibular incisor bone segment was generated from CT data. The von-Mises stress distributions and the total deformation distributions under vertical/lateral load were compared for each implant by scores ranking method. The implants with cylindrical shapes had highest scores. Results indicated that cylindrical shape represented better geometry over taper implant. This study is helpful in choosing the optimal dental implant for clinical application and also contributes to individual implant design. Our study could also provide reference for choice and modification of dental implant in any other insertion sites and bone qualities.     

Comparison of the primary stabilities of conical and cylindrical endosseous dental implants: an in-vitro study

The aim of this study is to determine the differences in primary stability between conical and cylindrical dental implants. The insertion and removal torques were the parameters used to measure the primary stability of the implants. Ten conical and cylindrical dental implants were positioned in polyurethane foam blocks to simulate bone density classes D1, D2, D3 and D4. The insertion and removal torques were quantified using a digital torque gauge. The maximum insertion torque and the maximum removal torque measured for the D1 and D4 synthetic bone were significantly higher for the conical implants than the cylindrical implants. In this in-vitro model, conical implants show significantly higher primary stability than cylindrical implants for the D1 and D4 synthetic bone classes.     

Should edentulous patients be constrained to removable complete dentures? The use of dental implants to improve the quality of life for edentulous patients

doi:10.1111/j.1741‐2358.2009.00294.x
Should edentulous patients be constrained to removable complete dentures? The use of dental implants to improve the quality of life for edentulous patients Background: Nowadays, there is some speculation among dental educators that the need for complete dentures will significantly decrease in the future and that training in their provision should be removed from the dental curriculum. Objective: To sensitise the reader to the functional shortcomings of complete denture therapy in the edentulous patient and present restorative options including implants to improve edentulous quality of life in these patients. Methods: Information retrieval followed a systematic approach using PubMed. English articles published from 1964 to 2008, in which the masticatory performance of patients with implant‐supported dentures was assessed by objective methods and compared with performance with conventional dentures, were included. Results: National epidemiological survey data suggested that the adult population in need of one or two complete dentures will increase from 35.4 million adults in 2000 to 37.9 million adults in 2020. Clinical studies have showed that the ratings of general satisfaction were significantly better in the patients treated with implant overdentures post‐delivery compared with the complete denture users. In addition, the implant group gave significantly higher ratings on comfort, stability and ability to chew. Furthermore, patients who received mandibular implant overdentures had significantly fewer oral health‐related quality of life problems than did the conventional group. Conclusion: Implant‐supported dentures including either complete overdentures or a hybrid prosthesis significantly improve the quality of life for edentulous patients compared with conventional removable complete dentures. Therefore, the contemporary dental practitioner should consider other options as well as conventional removable complete dentures to restore edentulous patients.     

On the effects of cyclic transversal forces on osseointegrated dental implants: experimental and finite element shakedown analyses

This paper is concerned with the mechanical strength of fixed osseointegrated dental implants subjected to cyclic external loads, applied mainly in a direction orthogonal to their axis. Such a loading condition, seen as a basic design action for the implant, has been given little attention so far. Experimental results and numerical simulations, performed on two- and three-dimensional Finite Element models, are discussed. The shakedown theory is used to show that a common implant design (threaded fixture-abutment-connection screw) is susceptible of low-cycle fatigue failure under loading conditions well within the working range, even if the same design is able to withstand loading of the same type, but applied monotonically, much in excess of the working values. The shakedown analyses give an indication of several possible failure modalities: the low-cycle fatigue either of the implant or of the connection screw, or the loosening of the connection screw itself. Experimental and numerical results are in good qualitative agreement, and both suggest that the issue of transversal cyclic loading on fixed dental implants should be carefully reconsidered in the design phase.     

标尺模板在Branemark种植修复中的制作和应用

目的:制作并观察标尺模板在指导Branemark种植手术,提高手术安全性方面的作用。方法:选择15例患者52颗种植体,铸造制作标尺模板后戴入口腔拍摄曲面体层片。根据影象所显示的适宜种植区域与颏孔、上颌窦等颌骨重要解剖结构的位置,结合上部修复设计选择Branemark种植体数量与植入点,并借助标尺模板的定位网格予以记录。手术时将标尺模板戴入口腔,根据记录结果在颌骨表面显示种植体入点与颌骨重要解剖结构的位置,指导手术进行。术后戴入标尺模板拍摄对照片,判断种植体与预定位置的吻合性。结果:52颗种植体中,除1颗种植体因术中临时改变种植位置,其余51颗种植入位置均与术前计划一致。结论:在Branemark种植修复中制作并应用标尺模板,能方便直观地帮助术者将种植体植入预定位置,避免损伤颏孔等颌骨重要解剖结构,提高了手术的正确性与安全性。     

On the Effects of Cyclic Transversal Forces on Osseointegrated Dental Implants: Experimental and Finite Element Shakedown Analyses

This paper is concerned with the mechanical strength of fixed osseointegrated dental implants subjected to cyclic external loads, applied mainly in a direction orthogonal to their axis. Such a loading condition, seen as a basic design action for the implant, has been given little attention so far. Experimental results and numerical simulations, performed on two- and three-dimensional Finite Element models, are discussed. The shakedown theory is used to show that a common implant design (threaded fixture-abutment-connection screw) is susceptible of low-cycle fatigue failure under loading conditions well within the working range, even if the same design is able to withstand loading of the same type, but applied monotonically, much in excess of the working values. The shakedown analyses give an indication of several possible failure modalities: the low-cycle fatigue either of the implant or of the connection screw, or the loosening of the connection screw itself. Experimental and numerical results are in good qualitative agreement, and both suggest that the issue of transversal cyclic loading on fixed dental implants should be carefully reconsidered in the design phase.     

An intra-oral hydraulic system for controlled loading of dental implants

This study reports a method for controlling loads on an in vivo dental implant and its application for the investigation of early loading versus delayed loading of dental implants. The method was developed for the purpose of studying an ongoing hypothesis that amounts to bone loss around dental implants are related to mechanical-mediated adaptation of the alveolar bone. Using a customized intra-oral hydraulic system, the daily loading over a dental implant has been completed and recorded for six Sinclair swine. Each pig had a 5-month duration implant loading. During the experiments (loading), no analgesic treatment was supplied. The mean of the in vivo daily loadings was confirmed through an in vitro bench test after each animal was euthanized. Variations of the averaged loading input among the six animals were smaller than 10%. Preliminary data produced by the model suggests that cervical bone loss is less for early loading than for delayed loading. The current system is expected to provide a useful load control model for the study of alveolar bone adaptation around dental implants in relation to various loadings.     

Management of post-hyperventilation apnea during dental treatment under monitored anesthesia care with propofol

Although hyperventilation syndrome generally carries a good prognosis, it is associated with the risk of developing severe symptoms, such as post-hyperventilation apnea with hypoxemia and loss of consciousness. We experienced a patient who suffered from post-hyperventilation apnea. A 17-year-old female who suffered from hyperventilation syndrome for several years developed post-hyperventilation apnea after treatment using the paper bag rebreathing method and sedative administration during a dental procedure. We subsequently successfully provided her with monitored anesthesia care with propofol. Monitored anesthesia care with propofol may be effective for the general management of patients who have severe hyperventilation attacks and post-hyperventilation apnea. This case demonstrates that appropriate emergency treatment should be available for patients with hyperventilation attacks who are at risk of developing post-hyperventilation apnea associated with hypoxemia and loss of consciousness.