Hot spot for Tn1000 insertions in cloned reprossor gene of the L phage

Insertions of Tn1000 into a cloned fragment of the L-phage genome comprising the repressor gene were prepared. Repressor activities produced by plasmids with insertions were assayed in vivo. As a result, the repressor gene was localized within 0.5 kb near one end of the cloned fragment. Transposon insertions were nonrandomly clustered within the repressor gene and in its close vicinity. An analysis of supercoiled plasmid DNA with the nuclease S1 revealed no distortion of the secondary structure of DNA in this region.     

Protein determinants of insertional specificity for the Drosophila gypsy retrovirus.

The gypsy retrovirus invades the germ line of Drosophila females, inserting with a high frequency into the ovo locus. Gypsy insertion sites in ovo are clustered within a region in the promoter of the ovo gene that contains multiple binding sites for the OvoA and OvoB proteins. We found that a 1.3-kb DNA fragment containing this region is able to confer gypsy insertional specificity independent of its genomic location. The frequency of gypsy insertions into the ovo gene is significantly lower in wild-type females than in ovoD1 females. In addition, gypsy insertions in ovoD1 females occur during most stages of germ-line development whereas insertions in wild-type females occur only in late stages. This pattern of temporally specific insertions, as well as the higher frequency of insertion in ovoD1 females, correlates with the presence of the OvoA or OvoD1 proteins. The results suggest that gypsy insertional specificity might be determined by the binding of the OvoA repressor isoform to the promoter region of the gene.     

Simple method of cloning eukaryote DNA: production of certain new ribosomal genes of Drosophila

We propose a simple method which allows to receive a collection of clones containing recombinant plasmids. It is based on the ligation of the longer fragment of pBR332 formed by EcoRI and BamH1 with eukaryotic DNA (from Drosophila melanogaster embryo in this case) partially cleaved with EcoRI and BamHI. This approach gave us 10(4) colonies from 1 microgram of Drosophila DNA and 0.1 microgram of the BamHI--EcoRI "vector". About 0.5% of all clones carried the fragments of ribosomal genes with insertions in the 26S gene. Ribosomal genes lacking insertions did not enter the collection due to some peculiarities in their restriction map. The sites of cleavage are mapped in eight recombinant plasmide for HindIII, BamHI and EcoRI. These maps show that some insertions within 26S gene have not been cloned earlier. The mean length of cloned fragments is 11.8 kilobases, the mean number of EcoRI and BamHI restriction sites are 1.2 and 1.0, respectively. The electrophoretical screening of plasmids using cetyl trimethyl ammonium bromide was developed.     

Use of TnphoA to detect genes for exported proteins in Escherichia coli: identification of the plasmid-encoded gene for a periplasmic acid phosphatase.

The structural gene (appA) for the periplasmic acid phosphatase (optimum pH 2.5) of Escherichia coli was cloned into a plasmid by using a combination of in vivo and in vitro techniques. The position and orientation of the appA gene within the cloned DNA fragment were identified by using fusions to the alkaline phosphatase gene (phoA) generated by Tn5 IS50L::phoA (TnphoA) insertions. For TnphoA-generated hybrid proteins to have high enzymatic activity, it appears that the phoA gene must be fused to a target gene coding for a signal which promotes protein export. The approach used to identify the appA gene thus appears to provide a simple general means of selectively identifying genes encoding membrane and secreted proteins.     

Direct and crossover PCR amplification to facilitate Tn5supF-based sequencing of lambda phage clones.

The 264 bp mini-transposon Tn5supF was constructed to sequence DNAs cloned in phage lambda without extensive shotgun subcloning or primer walking. Unique sequences near each transposon end serve as primer binding sites, and a supF gene is used to select transposition to lambda. We describe here PCR methods that facilitate Tn5supF-based sequencing. In a first pass, insertions are mapped relative to the ends of the cloned fragment using pairs of primers specific for vector DNA next to the cloning site and for a Tn5supF end. Most insertions not mapped in this step are near the center of the cloned fragment or in the vector arms, and are then mapped relative to the two innermost insertions by 'crossover' PCR. This involves amplification from primers on different DNA molecules, and generates hybrid DNA products whose lengths correspond to the distances between the two insertions. We routinely amplified more than 6 kb in direct PCR and 3 kb in crossover PCR; at the limit we amplified up to approximately 10 kb in direct PCR and approximately 6 kb in crossover PCR, but not reproducibly. Crossover PCR products were also obtained with insertions separated by only 200 bp, indicating that no rare sites are needed to switch templates. PCR products were purified by adsorption and then elution from glass slurry, and sequenced directly. Ladders of more than 400 bp were obtained from primer sites on each DNA strand; 2 kb was read from crossover PCR products, and showed that they were amplified with fidelity. In conclusion, direct and crossover PCR methods expedite transposon insertion mapping, and yield templates for accurate sequencing of both DNA strands.     

Cloning, characterization, and complementation of lesions causing acid sensitivity in Tn5-induced mutants of Rhizobium meliloti WSM419.

Four Tn5-induced mutants of Rhizobium meliloti WSM419 were unable to grow or maintain intracellular pH at an external pH of 5.6. Restriction analysis of DNA fragments carrying Tn5 and flanking sequences cloned from these mutants indicated that all four cloned mutations are unique and that the two strains (TG1-6 and TG1-11) carry Tn5 insertions which are within 4.4 kilobases of each other on a single EcoRI fragment. Southern analysis of total mutant DNA indicated a single copy of Tn5 in each mutant. A limited cosmid gene bank of wild-type WSM419 DNA was probed for homology to mutant DNA cloned from the acid-sensitive mutants. Dot hybridization experiments identified one cosmid element within this bank carrying wild-type DNA sequences corresponding to DNA implicated in acid tolerance. This cosmid was able to complement defects in growth and intracellular pH maintenance in TG1-11 but not TG1-6.     

A cloned immunoglobulin cDNA fragment enhances transposition of IS elements into recombinant plasmids.

Evidence is presented indicating that a novel DNA sequence arrangement generated by in vitro recombination may elicit high frequency transpositions of IS elements. A 109 bp Bam HI fragment of the cDNA for the immunoglobulin kappa light chain from MOPC 321 myeloma was cloned into the Bam HI site of pBR313. The cloned fragment extends from the codon for Gly 57 to the V-J junction. Insertions of IS1 or IS5 were identified in 6 of 50 plasmid DNAs isolated from freshly transformed clones. Additional transposition events were detected after subculturing for several growth cycles. Three independent insertions of IS1 occurred in the promoter region of the TcR operon. All IS5 and the remaining IS1 insertions were located in the TcR region upstream to the cloned DNA sequence. Sequences homologous to the ends of IS1, or corresponding to the consensus sequence at the target site of IS5 are present near the estimated sites of insertion of IS1 or IS5 respectively. Bacteria harboring recombinant plasmids carrying the cloned DNA in either orientation grew at a reduced rate relative to cells harboring pBR313, suggesting that fused gene products made from the two types of plasmid were inhibitory to cell growth. IS insertions, which relieved this inhibitory effect and thereby provided a selective advantage, were found exclusively in plasmids carrying the cloned DNA in only one of the two orientations. The fact that IS elements were not observed in the other type of recombinant plasmid indicates that selective pressure alone is not sufficient to account for the frequent IS insertions observed and that sequences at a distance from the site of IS insertion may be critical in the regulation of transposition frequency.     

Instability of Tn5 in a plasmid cloning vector for the cyanobacterium Anacystis nidulans.

Transposon Tn5 was used to produce insertions within the region of a cyanobacterial shuttle vector previously identified as necessary for transformation of Anacystis nidulans. These transposon-containing plasmids were used to transform a plasmid-cured derivative of Anacystis strain R2 and tested for structural stability of the transforming plasmid. The transposon DNA was deleted from all the plasmids containing Tn5 within the cyanobacterial replication region. Inserts in the vector DNA were physically stable and expressed the kanr gene. The internal Tn5 HindIII fragment was also cloned into each of the three HindIII sites in the shuttle plasmid. Inserts in two of these sites were stable, whereas inserts into the third site were not.     

Cloning,expression, and nucleotide sequence of livR,the repressor for high-affinity branched-chain amino acid transport in Escherichia coli

The livR gene encoding the repressor for high-affinity branched-chain amino acid transport in Escherichia coli has been cloned from a library prepared from the episome F106. The inserted DNA fragment from the initial cloned plasmid, pANT1, complemented two independent, spontaneously derived, regulatory mutations. Subcloning as well as the creation of deletions with Bal31 exonuclease revealed that the entire regulatory region is contained within a 1.1-kb RsaI-SalI fragment. Expression of the pANT plasmids in E. coli minicells showed that the regulatory region encodes one detectable protein with an apparent molecular weight of 21,000. DNA sequencing revealed one open reading frame of 501 bp encoding a protein with a calculated MW of 19,155. The potential secondary structure of the regulatory protein has been predicted and it suggests that the carboxy terminus may fold into three consecutive alpha helices. These results suggests that the livR gene encodes a repressor which plays a role in the regulation of expression of the livJ and the livK transport genes.     

Ruminant globin gene structures suggest an evolutionary role for Alu-type repeats

Bovine fetal and adult globin genes were cloned and subjected to DNA sequence analysis. Both of these genes contained insertions of Alu-type repetitive DNA within their introns. Comparison of cow and goat beta-type globin genes indicates that intragenic DNA insertions played a role in their evolution. These data support the theory that Alu-type repeats maintain genetic diversity by inhibiting gene conversion.     

The c1 repressor of bacteriophage P1 operator-repressor interaction of wild-type and mutant repressor proteins.

The c1 repressor gene of bacteriophage P1 and the temperature-sensitive mutants P1c1.100 and P1c1.162 was cloned into an expression vector and the repressor proteins were overproduced. A rapid purification procedure was required for the isolation of the thermolabile repressor proteins. Identification of the highly purified protein of an apparent molecular weight of 33,000 as the product of the c1 gene was verified by (i) the coincidence of partial amino acid sequences determined experimentally to that deduced from the c1 DNA sequence, and (ii) the temperature-sensitive binding to the operator DNA of the thermolabile repressor proteins. Analysis of the products of c1-c1.100 recombinant DNAs relates the thermolability to an unknown alteration in the C-terminal half of the c1.100 repressor. Binding to the operator DNA of c1 repressor is sensitive to N-ethylmaleimide. Since the only three cysteine residues are located in the C-terminal half of the repressor it is suggested that this part of the molecule is important for the binding to the operator DNA. This assumption is supported by the findings that a 14-kDa C-terminal repressor fragment obtained by cyanogen bromide cleavage retains DNA binding properties.     

Cloning and orientation of the gene encoding polynucleotide phosphorylase in Escherichia coli.

Mutations which affect the activity of polynucleotide phosphorylase (PNPase) map near 69 min on the bacterial chromosome. This region of the chromosome has been cloned by inserting the kanamycin-resistant transposon Tn5 near the argG and mtr loci at 68.5 min. Large SalI fragments of chromosomal DNA containing the Tn5 element were inserted into pBR322, and selection was made for kanamycin-resistant recombinant plasmids. Two of these plasmids were found to produce high levels of PNPase activity in both wild-type and host strains lacking PNPase activity. The pnp gene was further localized and subcloned on a 4.8 kilobase HindIII-EcoRI fragment. This fragment was shown to encode an 84,000-molecular weight protein which comigrated with purified PNPase during sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The orientation of the pnp gene was determined by insertion of Tn5 into the 4.8 kilobase fragment cloned in pBR322. Some of the insertions had lost the ability to elevate the level of PNPase activity in the host bacterium. Restriction mapping of the positions of the Tn5 insertions and analysis of plasmid-encoded polypeptides in UV-irradiated maxi-cells indicated that the pnp gene is oriented in the counterclockwise direction on the bacterial chromosome.     

Reduced restriction of EcoK in the presence of the plasmid pKM ard+. II. Cloning of the gene ard

Plasmid pKM101 affects the I type restriction EcoK in E. coli. The gene ard responsible for alleviation of EcoK restriction was shown to be located within the BglIIB fragment of pKM101. Here we have cloned ard gene into high copy vectors pBR322 and pUC12. Plasmid pD12 was constructed by introducing into pUC12 a 1.87 kb HindIII-Pst fragment, carrying ard gene. Tn5 and Tn1000 insertions were obtained in the ard gene region.     

Molecular cloning of a possible excretion protein of Vibrio cholerae

Abstract The gene for a Vibrio cholerae protein of about kDa (kilodalton) has been cloned and its location within the 1.9-kb cloned DNA fragment determined by transposon insertion and deletion analyses. The proteins encoded within the various plasmids have been analyzed in Escherichia coli K-12 minicells. The 25-kDa protein when expressed in E. coli K-12 allows the release of the periplasmic deoxyribonuclease. It is a minor protein suggesting that the release of DNase is not an artefact due to membrane damage. It is possible that this protein functions as part of an excretion system.
Results with transposon Tn 1725 insertions suggest that it contains a termination site in one orientation and a promoter in the other.