Nucleotide sequence of the Salmonella typhimurium mutB gene, the homolog of Escherichia coli mutY.

The mutB gene of Salmonella typhimurium is involved in a methylation-independent repair pathway specific for A/G or A/C mismatches and is the homolog of the Escherichia coli mutY gene. The mutB gene of S. typhimurium was cloned and sequenced. The isolated mutB clone reduced the mutation rate of the mutB mutant to wild-type levels and also restored A/G mismatch-specific nicking activity, which is defective in mutB extracts. The amino acid sequence encoded by the mutB gene is 91% homologous to that encoded by the E. coli mutY gene.     

GATC sequence and mismatch repair in Escherichia coli.

The Escherichia coli mismatch repair system greatly improves DNA replication fidelity by repairing single mispaired and unpaired bases in newly synthesized DNA strands. Transient undermethylation of the GATC sequences makes the newly synthesized strands susceptible to mismatch repair enzymes. The role of unmethylated GATC sequences in mismatch repair was tested in transfection experiments with heteroduplex DNA of phage phi 174 without any GATC sequence or with two GATC sequences, containing in addition either a G:T mismatch (Eam+/Eam3) or a G:A mismatch (Bam+/Bam16). It appears that only DNA containing GATC sequences is subject to efficient mismatch repair dependent on E. coli mutH, mutL, mutS and mutU genes; however, also in the absence of GATC sequence some mut-dependent mismatch repair can be observed. These observations suggest that the mismatch repair enzymes recognize both the mismatch and the unmethylated GATC sequence in DNA over long distances. The presence of GATC sequence(s) in the substrate appears to be required for full mismatch repair activity and not only for its strand specificity according to the GATC methylation state.     

Nucleotide sequence of the Escherichia coli mutH gene.

The complete nucleotide sequence of mutH gene from E. coli has been determined. Based on the deduced amino acid sequence, the MutH protein has a molecular weight of 25.4 kdaltons in agreement with the previous estimates based on SDS-polyacrylamide gel electrophoresis of the purified protein. Deletion analysis of the DNA sequences upstream of mutH has identified the promoter region for this gene. Two independently isolated temperature sensitive alleles of the mutH gene have also been sequenced. One mutation results in an amino acid change at position 27 (thr to leu) while the other occurs at position 156 (asp to asn).     

Nucleotide sequence of the Escherichia coli gene for lipid A disaccharide synthase.

The lpxB gene of Escherichia coli, believed to be the structural gene for lipid A disaccharide synthase, is located in the min 4 region of the chromosome. It is adjacent to and clockwise of the lpxA gene, which is thought to encode UDP-N-acetylglucosamine acyltransferase. Preliminary evidence suggests that lpxA and lpxB are cotranscribed in the clockwise direction and thus constitute part of a previously unknown operon (D. N. Crowell, M. S. Anderson, and C. R. H. Raetz, J. Bacteriol. 168:152-159, 1986). We now report the complete nucleotide sequence of a 1,522-base-pair PvuII-HincII fragment known to carry the lpxB gene. This sequence contained an open reading frame of 1,149 base pairs, in agreement with the predicted size, location, and orientation of lpxB. There was a second open reading frame 5' to, and in the same orientation as, lpxB that corresponded to lpxA. The ochre codon terminating lpxA was shown to overlap the methionine codon identified as the initiation codon for lpxB, suggesting that these genes are cotranscribed and translationally coupled. A third open reading frame was also shown to begin at the 3' end of lpxB with analogous overlap between the opal codon terminating lpxB and the methionine codon that putatively initiates translation downstream of lpxB in the clockwise direction. These results argue that at least three genes constitute a translationally coupled operon in the min 4 region of the E. coli chromosome. The accompanying paper by Tomasiewicz and McHenry (J. Bacteriol. 169:5735-5744, 1987) presents 4.35 kilobases of DNA sequence, beginning at the 3' end of lpxB, and argues that dnaE and several other open reading frames may be members of this operon.     

Nucleotide sequence of the Salmonella typhimurium mutS gene required for mismatch repair: homology of MutS and HexA of Streptococcus pneumoniae.

The mutS gene product of Escherichia coli and Salmonella typhimurium is one of at least four proteins required for methyl-directed mismatch repair in these organisms. A functionally similar repair system in Streptococcus pneumoniae requires the hex genes. We have sequenced the S. typhimurium mutS gene, showing that it encodes a 96-kilodalton protein. Amino-terminal amino acid sequencing of purified S. typhimurium MutS protein confirmed the initial portion of the deduced amino acid sequence. The S. typhimurium MutS protein is homologous to the S. pneumoniae HexA protein, suggesting that they arose from a common ancestor before the gram-negative and gram-positive bacteria diverged. Overall, approximately 36% of the amino acids of the two proteins are identical when the sequences are optimally aligned, including regions of stronger homology which are of particular interest. One such region is close to the amino terminus. Another, located closer to the carboxy terminus, includes homology to a consensus sequence thought to be diagnostic of nucleotide-binding sites. A third one, adjacent to the second, is homologous to the consensus sequence for the helix-turn-helix motif found in many DNA-binding proteins. We found that the S. typhimurium MutS protein can substitute for the E. coli MutS protein in vitro as it can in vivo, but we have not yet been able to demonstrate a similar in vitro complementation by the S. pneumoniae HexA protein.     

Escherichia coli heat-labile enterotoxin. Nucleotide sequence of the A subunit gene

We report the complete DNA sequence of the Escherichia coli elt A gene, which codes for the A subunit of the heat-labile enterotoxin, LT. The amino acid sequence of the LT A subunit has been deduced from the DNA sequence of elt A. The LT A subunit starts with methionine, ends with leucine, and comprises 254 amino acids. The computed molecular weight of LT A is 29,673. The A subunit of cholera toxin (CT A) has been shown to be structurally and functionally related to the LT A subunit. Comparison of the primary structure of LT A with the known partial amino acid sequence of CT A indicates that the 2 polypeptides share considerable homology throughout their sequences. The NH2-terminal regions exhibit the highest degree of homology (91%), while the COOH-terminal region, containing the sole cystine residue in each toxin is less conserved (approximately 52%). Alignment of homologous residues in the COOH-terminal regions of LT A and CT A indicates that a likely site for proteolytic cleavage of LT A is after Arg residue 188. The resulting A2 polypeptide would be 46 amino acids long, would contain a single cysteine residue, and have Mr = 5261. The elt A nucleotide sequence further predicts that the LT A protein is synthesized in a precursor form, possessing an 18-amino acid signal sequence at its NH2 terminus.     

Nucleotide sequence of the tag gene from Escherichia coli.

We have determined the complete nucleotide sequence of the tag gene, encoding 3-methyladenine DNA glycosylase I from Escherichia coli. From the nucleotide sequence it is deduced that the tag enzyme consists of 187 amino-acids and has a calculated molecular weight of 21.1 kdaltons. The tag enzyme is unusually rich in cysteine (8 residues) with a cluster of three consecutive cysteines near the C-terminal end. The tag coded DNA glycosylase does not show significant sequence homology to the alkA coded glycosylase in spite of that both of these enzymes catalyze the release of free 3-methyladenine from alkylated DNA.     

Nucleotide sequence of the Escherichia coli replication gene dnaZX.

The Escherichia coli 2.2 kilobase dnaZX region contains one 1929 nucleotide reading frame which directs the synthesis of two protein products involved in DNA polymerization. The larger consists of 643 amino acids in a deduced 71,114 dalton chain which could be the tau subunit of DNA polymerase III. The smaller, the DNA polymerase III gamma subunit, is encoded by the same reading frame as the larger. The dnaZX sequence contains a region homologous to ATP binding sites, suggesting that these replication factors are adenine nucleotide binding proteins.     

Nucleotide sequence of the Escherichia coli entE gene

The Escherichia coli entE gene encodes a polypeptide necessary in the latter stages of biosynthesis of the siderophore enterobactin. The entE gene and adjacent DNA were sequenced. The predicted EntE polypeptide consists of 536 amino acids and has a Mr of 58,299 and a net charge of -7.33. Genetic evidence combined with this and previous sequencing data indicate that the genes entCEB(G)A are transcribed as unit from a promoter upstream of entC.     

Nucleotide sequence of the Escherichia coli xanthine-guanine phosphoribosyl transferase gene.

The Escherichia coli gene coding for the enzyme xanthine-guanine phosphoribosyl transferase (gpt) has been widely used as a dominant selectable marker in a variety of mammalian cells. We have determined the complete nucleotide sequence of the 1057 base pair (bp) segment of DNA containing this gene. The coding sequence for the enzyme is 456 nucleotides long and can code for a 152 amino acid (16.9 Kd) polypeptide. A comparison of the amino acid sequence of the bacterial enzyme with that of the mammalian hypoxanthine-guanine phosphoribosyl transferase (hprt) reveals no significant homology between the two polypeptides.     

Nucleotide sequence of the murE gene of Escherichia coli

The nucleotide sequence of the murE gene encoding the diaminopimelic acid adding enzyme of Escherichia coli is reported. The coding region consisted of 1413 base pairs and was separated from the ftsI (penicillin-binding protein 3) gene by 61 base pairs. The deduced primary structure of MurE comprised 471 amino acid residues with a molecular mass of 50.6 kilodaltons.     

Nucleotide sequence and LexA regulation of the Escherichia coli recN gene.

The nucleotide sequence of a 2224 bp region of the Escherichia coli chromosome that carries the LexA regulated recN gene has been determined. A region of 1701 nucleotides encoding a polypeptide of 567 amino acids with a predicted molecular weight of 63,599 was identified as the most probable sequence for the recN structural gene. The proposed initiation codon is preceded by a reasonable Shine-Dalgarno sequence and a promoter region containing two 16 bp sequences, separated by 6 bp, that match the consensus sequence (SOS box) for binding LexA protein. DNA fragments containing this putative promoter region are shown to bind LexA in vitro and to have LexA-regulated promoter activity in vivo. The amino acid sequence of RecN predicted from the DNA contains a region that is homologous to highly conserved sequences found in several DNA repair enzymes and other proteins that bind ATP. A sequence of 9 amino acids was found to be homologous to a region of the RecA protein of E. coli postulated to have a role in DNA/nucleotide binding.