Evidence that IncG (IncP-6) and IncU plasmids form a single incompatibility group

The Escherichia coli IncG and IncU plasmid incompatibility groups were assigned in 1980 and 1981, respectively. Complete plasmid sequences have recently been published for both these groups, and revealed that their replication proteins are related. We show that when cloned at high-copy-number, putative iterons from the previously identified IncG replicon cause strong incompatibility with IncU plasmids. Incompatibility, albeit weaker, was also demonstrated between the two replicons at their normal low-copy-number. This suggests that a single incompatibility group exists. The only known IncG plasmid, Rms149, can replicate in Pseudomonas species where it is designated IncP-6. We recommend that the combined group be known as IncU (IncP-6 in Pseudomonas spp.).     

Genetic and functional analysis of the basic replicon of pPS10, a plasmid specific for Pseudomonas isolated from Pseudomonas syringae patovar savastanoi.

The sequence of a 1823 base-pair region containing the replication functions of pPS10, a narrow host-range plasmid isolated from a strain of Pseudomonas savastanoi, is reported. The origin of replication, oriV, or pPS10 is contained in a 535 base-pair fragment of this sequence that can replicate in the presence of trans-acting function(s) of the plasmid. oriV contains four iterons of 22 base-pairs that are preceded by G+C-rich and A+T-rich regions. A dnaA box located adjacent to the repeats of the origin is dispensable but required for efficient replication of pPS10; A and T are equivalent bases at the 5' end of the box. repA, the gene of a trans-acting replication protein of 26,700 Mr has been identified by genetic and functional analysis. repA is adjacent to the origin of replication and is preceded by the consensus sequences of a typical sigma 70 promoter of Escherichia coli. The RepA protein has been identified, using the minicell system of E. coli, as a polypeptide with an apparent molecular mass of 26,000. A minimal pPS10 replicon has been defined to a continuous 1267 base-pair region of pPS10 that includes the oriV and repA sequences.     

Stimulation of the lysogenization of Pseudomonas aeruginosa cells by phage transposon B39 induced by plasmid Rms163

The influence of Rms163 plasmid on lysogenization of Pseudomonas aeruginosa cells by B39 phage was studied. Plasmid Rms163 was shown to increase the frequency of lysogenization of PAO1 cells 7-8 times. C-mutants of B39 phage were isolated. According to complementation test, c-mutants were distributed into two groups--cI and cII/III. The product of cI is essential for establishment and maintenance of lysogenic state, cII/cIII product being only necessary for establishment of lysogenization. The mutants with special characteristics were isolated: B39cx1 phage carries a mutation which seems to be located on a regulatory site essential for establishment of lysogenic state. The region of the B39 genome responsible for interaction with Rms163 plasmid was mapped. Possible mechanisms of Rms163 plasmid interference with transposable B39 phage are discussed.     

Nucleotide sequence of the Serratia entomophila plasmid pADAP and the Serratia proteamaculans pU143 plasmid virulence associated region

Some strains of Serratia entomophila and S. proteamaculans cause amber disease of the New Zealand grass grub Costelytra zealandica (Coleoptera: Scarabaeidae), an important pasture pest in New Zealand. The disease determinants of S. entomophila, are encoded on a 153,404-bp plasmid, termed pADAP for amber disease associated plasmid. The S. proteamaculans strain 143 (Sp143) exhibits an unusual pathotype, where only 60-70% of C. zealandica larvae infected with the bacterium succumb to disease. DNA sequence analysis of the Sp143 pU143 virulence associated region identified high DNA similarity to the pADAP sep virulence associated region, with DNA sequence variation in the sepA gene and the variable region of the sepC component. No pADAP anti-feeding prophage orthologue was detected in the Sp143 genome. The region of pADAP replication was cloned and found to replicate in S. entomophila but not in Escherichia coli. DNA sequence analysis of the plasmid pSG348 repA gene from the French isolate of Serratia grimesii, identified 93% DNA identity to the pADAP repA gene. A comparison of the pU143 virulence associated region with the completed pADAP nucleotide sequence is given.     

Characterization of an autonomously replicating region from the Streptomyces lividans chromosome.

The chromosomal replication origin of the plasmidless derivative (TK21) from Streptomyces lividans 66 has been cloned as an autonomously replicating minichromosome (pSOR1) by using the thiostrepton resistance gene as a selectable marker. pSOR1 could be recovered as a closed circular plasmid which shows high segregational instability. pSOR1 was shown to replicate in Streptomyces coelicolor A3(2) and in S. lividans 66 and hybridized with DNA from several different Streptomyces strains. Physical mapping revealed that oriC is located on a 330-kb AseI fragment of the S. coelicolor A3(2) chromosome. DNA sequence analyses showed that the cloned chromosomal oriC region contains numerous DnaA boxes which are arranged in two clusters. The preferred sequence identified in the oriC region of Escherichia coli and several other bacteria is TTATCCACA. In contrast, in S. lividans, which has a high GC content, the preferred sequence for DnaA boxes appears to be TTGTCCACA.     

In vitro deletion mapping of the viral strand replication origin of Pseudomonas bacteriophage Pf3.

The origin of viral strand replication of the filamentous bacteriophage Pf3 has been characterized in Escherichia coli by in vitro deletion mapping techniques. The origin region was functionally identified by its ability to convey replicative properties to a recombinant plasmid in a polA host in which the replication origin of the vector plasmid is not functional. The origin of Pf3 viral strand replication is contained within a DNA sequence of 139 bp. This sequence covers almost completely one of the intergenic regions of the Pf3 genome, and it specifies both replication initiation and termination functions. Although no nucleotide sequence homology is present between the Pf3 origin of viral strand replication and that of the E. coli filamentous phages Ff (M13, f1, and fd) and IKe, their map positions and functional properties are very similar.     

Complete nucleotide sequence of a Selenomonas ruminantium plasmid and definition of a region necessary for its replication in Escherichia coli.

A plasmid from Selenomonas ruminantium subspecies lactilytica has been subcloned in Escherichia coli K-12 and completely sequenced. Three open reading frames (ORFs) of 909, 801, and 549 bp were identified and the complete sequence was analyzed by comparison with DNA and protein databases. No significant deoxynucleotide or amino acid sequence homology with other published genes or proteins was detected. The plasmid was shown to replicate independently in E. coli K-12 by a DNA polymerase I-dependent mechanism and deletion analysis defined the DNA sequence responsible for this phenotype.     

IncP-9 replication initiator protein binds to multiple DNA sequences in oriV and recruits host DnaA protein

The minimal replicon from IncP-9 plasmid pM3, consisting of oriV and rep, is able to replicate in Pseudomonas putida but not in Escherichia coli, unless production of Rep protein is increased. The Rep protein, at 20kDa, is the smallest replication protein so far identified for a theta replicating plasmid. Rep was purified and shown to bind in three blocks across the oriV region that do not correlate with a single unique binding sequence. The block closest to rep is not necessary for oriV function. Rep forms at least two types of complex--one rendering the DNA entirely resistant to cleavage, the other occupying one side of the helix. No short segment of oriV showed the same affinity for Rep as the whole of oriV. The oriV region did not bind purified DnaA from E. coli, P. putida or P. aeruginosa but when Rep was present also, super-shifts were found with DnaA in a sequence-specific manner. Scrambling of the primary candidate DnaA box did not inactivate oriV but did increase the level of Rep required to activate oriV. The general pattern of Rep-DNA recognition sequences in oriV indicates that the IncP-9 system falls outside of the paradigms of model plasmids that have been well-studied to date.     

Properties of the Beta-Lactamase Specified by the Pseudomonas Plasmid RPL11

The Pseudomonas plasmid RPL11 specifies a beta-lactamase that has properties distinguishing it from other plasmid-mediated beta-lactamases so far described, although it closely resembles plasmid Rms139 beta-lactamase.     

Fidelity of replication of repetitive DNA in mutS and repair proficient Escherichia coli

Replication fidelity is not constant among strains within a species or at all genetic loci within a genome. Altered fidelity of replication may affect patterns of pathogenesis and the evolution of these strains. We have been studying replication fidelity in Escherichia coli, both in laboratory attenuated strains and in food-borne pathogens. To understand the altered patterns of mutagenesis at the molecular level, we used a shuttle vector plasmid with a tRNA mutational marker gene which had been altered to include homopolymeric runs of five, seven and nine [G:C] pairs, as well as non-repetitive DNA. Replication of the plasmid in mutS strains resulted in a 20-fold increase in mutant progeny plasmids. The mutations were almost all (>90%) frameshift mutations, while base substitution mutations were rare. Most mutations were insertions or deletions of one or two [G:C] pairs in the longest homopolymeric runs. Larger deletions (5 to >70bp), also targeted to the repetitive sequence, were likewise common. Mutations increased exponentially with the length of the homopolymeric run. These patterns of mutation, including unexpectedly high levels in repair proficient strains, led to an examination of the E. coli K-12 genome for homopolymeric DNA. This sequence motif was found to be rare, particularly in genes and open reading frames. Amino acid homotrimers were found to avoid usage of homopolymeric codons, even when they are preferred among synonymous codons in E. coli. There appears to be active selection against tandem direct nucleotide repeats in the E. coli genome, correlated with the inability of the organism to accurately replicate such sequence.     

Nucleotide sequences and expression in Escherichia coli of the in-phase overlapping Pseudomonas aeruginosa plcR genes.

The translation products of chromosomal DNAs of Pseudomonas aeruginosa encoding phospholipase C (heat-labile hemolysin) have been examined in T7 promoter plasmid vectors and expressed in Escherichia coli cells. A plasmid carrying a 4.7-kilobase (kb) DNA fragment was found to encode the 80-kilodalton (kDa) phospholipase C as well as two more proteins with an apparent molecular mass of 26 and 19 kDa. Expression directed by this DNA fragment with various deletions suggested that the coding region for the two smaller proteins was contained in a 1-kb DNA region. Moreover, the size of both proteins was reduced by the same amount by an internal BglII-BglII DNA deletion, suggesting that they were translated from overlapping genes. Similar results were obtained with another independently cloned 6.1-kb Pseudomonas DNA, which in addition coded for a 31-kDa protein of opposite orientation. The nucleotide sequence of the 1-kb region above revealed an open reading frame with a signal sequence typical of secretory proteins and a potential in-phase internal translation initiation site. Pulse-chase and localization studies in E. coli showed that the 26-kDa protein was a precursor of a secreted periplasmic 23-kDa protein (PlcR1) while the 19-kDa protein (PlcR2) was mostly cytoplasmic. These results indicate the expression of Pseudomonas in-phase overlapping genes in E. coli.     

Isolation and molecular characterization of a novel broad-host-range plasmid from Bordetella bronchiseptica with sequence similarities to plasmids from Gram-positive organisms

A 2.6 kb plasmid, named pBBR1, was isolated from Bordetella bronchiseptica S87. After insertion of an antibiotic resistance marker, this plasmid could be transferred into Escherichia coli, Bordetella pertussis, B. bronchiseptica, Vibrio cholerae, Rhizobium meliloti, and Pseudomonas putida by transformation or conjugation. Conjugation was possible only when the IncP group transfer functions were provided in trans. As shown by incompatibility testing, pBBR1 does not belong to the broad-host-range IncP, IncQ or IncW groups. DNA sequence analysis revealed two open reading frames: one was called Rep, involved in replication of the plasmid, and the other, called Mob, was involved in mobilization. Both the amino-terminal region of Mob and its promoter region show sequence similarities to Mob/Pre proteins from plasmids of Gram-positive bacteria. In spite of these sequence similarities, pBBR1 does not replicate via the rolling-circle mechanism commonly used by small Gram-positive plasmids. We therefore speculate that pBBR1 may combine a mobilization mechanism of Gram-positive organisms with a replication mechanism of Gram-negative organisms. Determination of the plasmid copy number in E. coli and B. pertussis indicated that pBBR1 has a rather high copy number, which, in conjunction with its small size and broad host range, renders it particularly interesting for studies of broad-host-range replicons and for the development of new cloning vectors for a wide range of Gram-negative bacteria.     

Molecular cloning and biological characterization of the recA gene from Pseudomonas syringae.

We have identified a recombinant plasmid, pCUV8, from a cosmid library of Pseudomonas syringae genomic DNA which contains a functional analog of the Escherichia coli recA gene. The plasmid was initially identified by its ability to restore UV resistance to E. coli HB101. Quantitative analysis demonstrated that it restored both recombination proficiency and UV resistance to an E. coli recA deletion mutant. By these criteria, pCUV8 appears to contain the P. syringae recA gene. Several pathogenic and epiphytic strains of P. syringae, but not E. coli, showed sequence homology to pCUV8 under normal stringency.     

P1 plasmid replication: replicon structure

Bacteriophage P1 lysogenizes Escherichia coli as a unit-copy plasmid. We have undertaken to define the plasmid-encoded elements implicated in P1 plasmid maintenance. We show that a 2081 base-pair fragment of the 90,000 base P1 plasmid confers the capacity for controlled plasmid replication. DNA sequence analysis reveals several open reading frames in this fragment. The largest is shown to encode a 32,000 Mr protein required for plasmid replication. The corresponding gene, repA, has been identified genetically. A set of five 19 base-pair repeats is located upstream from repA; a set of nine similar repeats is located immediately downstream from repA. Each set of repeats, when cloned into pBR322, exerts incompatibility towards a P1 replicon. The upstream set, designated incC, consists of direct repeats that are spaced about two turns of the DNA helix apart; the downstream set, designated incA, consists of nine repeats arranged three in one orientation and six in the other. Spacing between incA repeats were three or four turns of the helix apart. The organization of the plasmid maintenance regions of P1 and the unit-copy sex factor plasmid, F, is strikingly similar. Although the DNA sequences of this region in the two plasmids exhibit little homology, a 9 base-pair sequence that appears four times in the origin region of members of the Enterobacteriaceae also occurs twice as direct repeats in similar positions in P1 and F. This sequence, where it occurs in E. coli, has been postulated to be the binding site for the essential replication protein determined by dnaA. The dnaA protein appears not to be essential for the replication of either plasmid; therefore, the function of the sequence in P1 and F may be regulatory.     

Characterization of the genome of Pseudomonas aeruginosa bacteriophage phi PLS27 with particular reference to the ends of the DNA.

The DNA of Pseudomonas aeruginosa rough-specific bacteriophage phi PLS27 was studied. The genome size as determined by summing the sizes of restriction fragments was 42.7 kilobase pairs. Of particular interest was the fact that the DNA was insensitive to certain common restriction endonucleases including EcoRI, BamHI, and HindIII. The ends of the phage DNA were cloned and sequenced, revealing direct repeats of 318 nucleotides. The left end of the genome when cloned into the promoter selection vector pKK232-8 exhibited promoter activity in Escherichia coli. Two promoters bearing greater than 70% sequence homology to the plasmid pNM74 TOL operon and PAK pilin promoters were identified.     

Potential for transduction of plasmids in a natural freshwater environment: effect of plasmid donor concentration and a natural microbial community on transduction in Pseudomonas aeruginosa

Transduction of Pseudomonas aeruginosa plasmid Rms149 by the generalized transducing bacteriophage phi DS1 was shown to occur during a 9-day incubation of environmental test chambers in a freshwater reservoir. Plasmid DNA was transferred from a nonlysogenic plasmid donor to a phi DS1 lysogen of P. aeruginosa that served both as the source of the transducing phage and as the recipient of the plasmid DNA. When the concentration of donors introduced into the chambers was varied while the recipient concentration in each chamber was at a level equivalent to natural concentrations of P. aeruginosa, the concentration of plasmid-containing donor cells introduced was shown to affect the frequency of transduction significantly. Transduction was observed both in the absence and in the presence of the natural microbial community. The presence of the natural community resulted in a rapid decrease in the numbers of the introduced donors and recipients and a decrease in the number of transductants recovered. These results demonstrate the potential for naturally occurring transduction in aquatic environments and indicate that donor load may be an important parameter in assessing this potential.     

Potential for transduction of plasmids in a natural freshwater environment: effect of plasmid donor concentration and a natural microbial community on transduction in Pseudomonas aeruginosa.

Transduction of Pseudomonas aeruginosa plasmid Rms149 by the generalized transducing bacteriophage phi DS1 was shown to occur during a 9-day incubation of environmental test chambers in a freshwater reservoir. Plasmid DNA was transferred from a nonlysogenic plasmid donor to a phi DS1 lysogen of P. aeruginosa that served both as the source of the transducing phage and as the recipient of the plasmid DNA. When the concentration of donors introduced into the chambers was varied while the recipient concentration in each chamber was at a level equivalent to natural concentrations of P. aeruginosa, the concentration of plasmid-containing donor cells introduced was shown to affect the frequency of transduction significantly. Transduction was observed both in the absence and in the presence of the natural microbial community. The presence of the natural community resulted in a rapid decrease in the numbers of the introduced donors and recipients and a decrease in the number of transductants recovered. These results demonstrate the potential for naturally occurring transduction in aquatic environments and indicate that donor load may be an important parameter in assessing this potential.     

Use of deletion mutants of plasmid RP4::D3112 for the genetic analysis of Pseudomonas aeruginosa bacteriophage D3112

The hybrid plasmid RP4::D3112 becomes unstable in Escherichia coli K-12 cells under certain growth conditions. The deletion mutants of this plasmid are formed at a high frequency. All the deletions selected have a specific feature: they start in the left end, at the point of joining of plasmid and phage DNA, and remove different portions of the phage genome. The deletion mutants have been used for genetic mapping of D3112. We have localized the repressor gene cI (0-1.3 kb), 3 early genes (1.3-14.2 kb) and two groups of late genes (14.2-29.9 and 29.9-38 kb). Electron microscope studies of RP4::D3112 DNA and its deletion derivatives have shown that integration of D3112 genome in RP4 occurs through the ends of the genome, without permutations. It appears that bacterial nucleotide sequences joined to DNA from mature D3112 particles, to the right end of D3112 genome, are lost. Thus, transposable phages D3112 of Pseudomonas aeruginosa and E. coli Mu phage have some similarities in the genome organization and in the way of their integration into the host DNA.