Rapid and efficient method for cloning of blunt-ended DNA fragments

We describe a system to generate cDNA or genomic libraries from DNA segments that have blunt termini. Background and rearrangement levels are low, but efficiencies are high and the procedural times very short. T4 ligase in the presence of polyethylene glycol produces high Mr oligomers of vector and insert. These concatemers are reduced to vector-insert monomers at a high frequency by subsequent cleavage with a restriction endonuclease, which recognises the insert rarely, if at all, and the vector once. The monomers are recircularised under standard ligation conditions prior to transformation. Thus insertion conditions are optimised independently of those for recircularisation. All reading frames for expression libraries are generated by short BAL 31 cleavage followed by the blunt-end cloning procedure. Similarly, genomic expression libraries can be made by BAL 31 or mung-bean nuclease treatment after cleavage with DNase I is the presence of Mn2+. The technique is suitable for any DNA segment that is blunt-ended or can be made so. When the vector is treated with alkaline phosphatase, recombinants are generated at a frequency greater than 90% and have single inserts. Yields are 3-5 X 10(6) colony-forming units per micrograms of insert.     

A small cosmid for efficient cloning of large DNA fragments

The production and use of the 6 kb cosmid pHC79, a derivative of pBR322, is described. It can be used for cloning of fragments cleaved by EcoRI, ClaI, BamHI (also BglII, BclI, Sau3A and MboI), SalI (also XhoI and AvaI), EcaI and PstI. Hybrid cosmids containing inserts in the size range of 40 kb are packaged in vitro and transduced with an efficiency of 5 X 10(4) - 5 X 10(5) clones/microgram of insert DNA. Prefractionation of the DNA fragments to be cloned into 40 kb sized fragments ensures the cloning of contiguous stretches of DNA. Proteins produced in vitro by the cosmid pHC79 are identical to the ones produced by its pBR322 parent.     

Turbo cloning: a fast, efficient method for cloning PCR products and other blunt-ended DNA fragments into plasmids.

The method uses a novel plasmid vector, p9lox5, containing a site-specific recombination sequence lox from the lox/Cre recombinase system of bacteriophage P1. There are two distinct stages. Firstly, vector and fragment DNAs are ligated intermolecularly under conditions of macromolecular crowding (15% polyethylene glycol 6000) which accelerate blunt-end joining a thousandfold. Secondly, circular recombinant molecules are efficiently excised from the ligation products by Cre recombinase acting on pairs of lox sites within directly repeated vector molecules flanking insert DNA. Recombinants are introduced into cells conventionally by transformation or electroporation. In both a model system and the cloning of PCR products, yields approaching those obtainable in cohesive-end cloning were achieved. Applications of the technique to cDNA library generation and recovery of DNA from archive material are discussed.     

An F factor based cloning system for large DNA fragments.

An effective technique using an Escherichia coli plasmid system was developed to clone fragments of exogenous DNA of as large as 100 kilobase pairs. The characteristic features of this technique are the use of a low copy number (one to two) mini-F based plasmid vector and the introduction of artificial lambda cosR ends into the termini of DNA sources and then of the cosL ends into those of linearized vector molecules. This terminal modification greatly facilitated the formation of active large recombinant molecules, which was rarely achieved when the modification was omitted. The efficiency with which large recombinant clones can be generated is high enough to allow construction of a comprehensive library of higher organisms. All analyses of the plasmids recovered have revealed that the inserts were faithful replicas of the human DNAs used as sources.     

A procedure for cloning restriction fragments of DNA as single inserts in yeast artificial chromosomes

A novel procedure is described for the cloning of partial EcoRI fragments of bovine DNA: it reduces the chance of sequence rearrangements due to multiple insertions (co-cloning) of restriction fragments in the resulting YAC. The DNA to be inserted has been dephosphorylated, whereas the matching ends of the vector, pYAC4, have not. The ligation was essentially complete, the transformation efficiency was close to 19 transformants per ng of vector and the frequency of clones carrying YAC, 60-100 kb in size, was close to 70%. The YACs show segregative and replicative stability.     

A simple and rapid procedure for sequencing long (40-kb) DNA fragments

A simple procedure has been developed for sequencing long (40-kb) DNA fragments by the dideoxy method. The fragment is cloned in the sequencing cosmid pAA113X by in vitro packaging, and subdivided by a series of overlapping IS1-promoted deletions. The deletions are isolated by positive selection for galactose resistance. Plasmids from several thousand galactose-resistant colonies are fractionated on an agarose gel, and DNA from each fraction is restricted with enzymes (such as SphI and SalI) to shorten each deletion from the opposite end. As a result, a series of short overlapping segments, spread across the entire length of the fragment, are fused to IS1. The plasmids are extracted by a rapid method, arranged according to size, and used for supercoil sequencing with an IS1 primer. Sequences of IS1-promoted deletions contain extensive overlaps that are connected further by restriction enzyme-generated deletions to give the complete 40-kb sequence.     

A simple and effective separation and purification procedure for DNA fragments using Dodecyltrimethylammonium bromide

In this work we describe a simple two step separation procedure for the separation and purification of short DNA fragments. The first step involves precipitating the DNA using the cationic surfactant dodecyltrimethylammonium bromide. Dodecyltrimethylammonium bromide, unlike cetyltrimethylammonium bromide will not precipitate DNA before complexation is complete thus providing a high purity DNA. The second step involves dissolution of the DNA-dodecyltrimethylammonium complex in 75% ethanol, followed by precipitation of the Sodium-DNA salt, by titrating in a salt solution. This method is particularly suited to purification of short fragments as it does not require high salt concentrations in the ethanol precipitation step, which can be damaging for short DNA. The ability of dodecyltrimethylammonium bromide to remove ethidium bromide from intercalation sites on the DNA is also discussed     

A simple and efficient procedure for generating stable expression libraries by cDNA cloning in a retroviral vector.

cDNA expression cloning is a powerful method for the rescue and identification of genes that are able to confer a readily identifiable phenotype on specific cell types. Retroviral vectors provide several advantages over DNA-mediated gene transfer for the introduction of expression libraries into eukaryotic cells since they can be used to express genes in a wide range of cell types, including those that form important experimental systems such as the hemopoietic system. We describe here a straightforward and efficient method for generating expression libraries by using a murine retroviral vector. Essentially, the method involves the directional cloning of cDNA into the retroviral vector and the generation of pools of stable ecotropic virus producing cells from this DNA. The cells so derived constitute the library, and the virus they yield is used to infect appropriate target cells for subsequent functional screening. We have demonstrated the feasibility of this procedure by constructing several large retroviral libraries (10(5) to 10(6) individual clones) and then using one of these libraries to isolate cDNAs for interleukin-3 and granulocyte-macrophage colony-stimulating factor on the basis of the ability of these factors to confer autonomous growth on the factor-dependent hemopoietic cell line FDC-P1. Moreover, the frequency at which these factor-independent clones were isolated approximated the frequency at which they were represented in the original plasmid library. These results suggest that expression cloning with retroviruses is a practical and efficient procedure and should be a valuable method for the isolation of important regulatory genes.     

An efficient cloning of DNA fragments by a method based on uracil-DNA glycosylase and endonuclease IV

We introduced a novel method to clone random DNA fragments independent of ligation reaction. The method involves the generation of long protruding ends on PCR amplification DNA. Both oligonucleotides used for the amplification of the vector DNA carried one uracil residue at the tenth position from the 5′ end and this made the creation of the 3′ protruding ends of linearized vector possible by uracil-DNA glycosylase (UDG) and endonuclease IV (Endo IV). 76 groups of annealed oligonucleotides that had ten-nucleotides protruding at 3′-end, which were complementary to those at 3′-end of the linearized vector, were designed. The linearized vector and the annealed oligonucleotide were mixed together to transform E.coli directly without ligation reaction. The number of the clone that grew on the plates had been demonstrated to reach 1 × 10⁵ transformants/μg and 96.1% of transformants harbored the cloned fragments. From the results of transformation, we can confirm that the efficiency of the creation of 3′ protruding ends in our method is high and our cloning method is benefit to produce recombinants easily and efficiently.     

A simple and efficient procedure for the isolation of high-quality phage lambda DNA using a DEAE-cellulose column

A simple and rapid procedure for purifying large quantities of bacteriophage lambda particles and DNA is described. The procedure involves DEAE-cellulose column chromatography of the phage particles and elution of the phage particles from the column with a low-ionic-strength buffer. The resulting phage were well separated from RNA, DNA, and proteins derived from Escherichia coli host cells. The lambda DNA was prepared from the purified phage particles by the conventional method of phenol extraction and ethanol precipitation. This procedure did not use nucleases, proteases, detergents, or CsCl density gradient centrifugation. The lambda DNA obtained by this method was equivalent in purity to the material prepared by CsCl density gradient centrifugation and amenable to restriction enzyme digestion, ligation, radiolabeling, and double-stranded DNA sequencing. A detailed protocol is described for obtaining 0.5 to 1.0 mg DNA from a 1-liter liquid lysate in less than 5 h. This procedure is simple, inexpensive, and timesaving, and is particularly suitable for large-scale isolation of lambda DNA.     

Molecular cloning of Renibacterium salmoninarum DNA fragments

A Renibacterium salmoninarum enriched recombinant DNA library was constructed to isolate DNA fragments which could be used as probes to detect gene sequences specific for the causative agent of bacterial kidney disease in salmonid fish. One fragment of 149 base pairs was isolated and its specificity and sequence determined. This probe may prove useful in the design of diagnostic tests for the disease in asymptomatic fish and ova.     

Generating tandem repeats by cloning with double initiator fragments

The ability to generate tandem repeats of a DNA sequence has proven important for a large variety of studies of DNA structure and function. The most commonly used method to produce tandem repeats involves cloning of an oligomerized monomer sequence that contains asymmetric overlapping ends, but, in practice, this approach is inefficient because of the circularization of oligomers before they ligate into vector. Described here is a method that circumvents this problem by the use of two separate oligomerization reactions, each containing an initiator fragment onto which monomer polymerizes without circularization. Subsequent mixing of the two reactions permits circularization, generating a viable plasmid containing the sum of the added repeats from each reaction. A variation of this method is also demonstrated that permits the synthesis of constructs with a defined number of repeats.