Molecularly imprinted cryogel for L-glutamic acid separation

A molecular recognition based L-glutamic acid (L-GLU) imprinted cryogel was prepared for L-GLU separation via chromatographic applications. The novel functional monomer N-methacryloyl-(L)-glutamic acid-Fe(3+) (MAGA-Fe(3+) ) was synthesized to be complex with L-GLU. The L-GLU imprinted cryogel was prepared by free radical polymerization under semifrozen conditions in the presence of a monomer-template complex MAGA-Fe(3+) -L-GLU. The binding mechanism of MAGA-Fe(3+) and L-GLU was characterized by Fourier transform infrared (FTIR) spectroscopy in detail. FTIR analyses on the synthesized MAGA-Fe(3+) -GLU complex reveals bridging bidentate and monodentate binding modes of Fe(3+) in complex with the carboxylate groups of the glutamate residues. The template L-GLU could be reversibly detached from the cryogel to form the template cavities using a 100 mM solution of HNO(3) . The amount of adsorbed L-GLU was detected using the phenyl isothiocyanate method. The L-GLU adsorption capacity of the cryogel decreased drastically from 11.3 to 6.4 μmol g(-1) as the flow rate increased from 0.5 to 4.0 mL min(-1) . The adsorption onto the L-GLU imprinted cryogel was highly pH dependent due to electrostatic interaction between the L-GLU and MAGA-Fe(3+) . The PHEMAGA-Fe(3+) -GLU cryogel exhibited high selectivity to the corresponding guest amino acids (i.e., D-GLU, L-ASN, L-GLN, L-, and D-ASP). Finally, the L-GLU imprinted cryogel was recovered and reused many times, with no significant decrease in their adsorption capacities.     

Development of molecularly imprinted polymers as tailored templates for the solid-state [2+2] photodimerization

In this study, a molecularly imprinted polymer (MIP) was prepared to selectively template the [2+2] photodimerization of trans-1,2-bis(4-pyridyl)ethylene. First, an MIP selective for rctt-tetrakis(4-pyridyl)cyclobutane, which is the [2+2] photodimerization product of trans-1,2-bis(4-pyridyl)ethylene, was prepared from methacrylic acid (MAA) and ethylene glycol dimethacrylate (EGDMA). The non-covalent MIP showed enhanced affinity for both the templating agent, rctt-tetrakis(4-pyridyl)cyclobutane, and the alkene precursor, trans-1,2-bis(4-pyridyl)ethylene. The solid-state photodimerization reaction proceeded in significantly higher yields in the presence of the MIP. Control reactions carried out in the absence of polymer gave no product, and reactions carried out in the presence of a non-imprinted polymer and an MIP imprinted with a different template, 3-hydroxymethylpyridine, gave much lower yields of the cyclobutane photodimerization product. The outcome of the MIP-templated photodimerization reaction was strongly influenced by the binding site heterogeneity of the non-covalently imprinted polymers. For example, higher yields were observed with decreasing olefin loadings levels on the MIPs. This binding site heterogeneity was characterized via application of the Freundlich binding model to the experimentally measured binding isotherms. These confirmed that the non-covalent MIPs had very few high-affinity binding sites, which greatly limits the capacity and ultimately the utility of these materials as templates in synthetic organic applications.     

Molecularly imprinted polymer with salicylaldehyde-Cu(OAc)2 as template

In the report molecularly imprinted polymer (MIP) with salicylaldehyde-Cu(OAc)(2) as the template was synthesized and characterized by SEM, porosity and elemental analysis. Copper acetate was introduced since salicylaldehyde alone cannot display imprinting effect for its intramolecular hydrogen bond. The strong coordination interaction between salicylaldehyde and copper acetate made the complex have high retention on the HPLC column based on the SAD-Cu(OAc)(2) imprinted polymer. Several structural analogues such as salicylaldoxime, sulfosalicylic acid, p-hydroxybenzaldehyde and their complexes with copper acetate were chosen to study the selectivity of the MIPs. The influence of acetic acid and H(2)O in methanol mobile phase was studied. The experimental results showed that small amount of either acetic acid or H(2)O in mobile phase would weaken the interaction between the complex and the polymer, therefore, the retention of the complex was lowered to a large extent, but that of salicylaldehyde remained almost unchanged. The polymer imprinted with the complex showed high selectivity to both the acetate and copper (II). In addition, the MIP showed an enhanced selectivity to its template compared with the polymer prepared without copper acetate.     

Using protein templates to direct the formation of thin-film polymer surfaces

Protein imprinted electrodes formed by the cyclic voltammetric deposition of conductive polymers, on screen-printed platinum supports, in the presence of target proteins have been fabricated. An initial layer of polypyrrole was used as a supporting polymer layer, upon which were formed two layers of polyaminophenylboronic acid. The first of these layers was non-imprinted and formed a barrier between the polypyrrole and the outer layer, which was deposited in the presence of a protein template (lysozyme or cytochrome c). After protein extraction, re-binding of the template proteins to their respective imprinted electrodes showed a distinct two-phase binding profile; whereas, binding to control polymers, made in the same way but without the addition of protein templates, showed progressive binding typical of non-specific recognition. Reductions in the observed current transmission due to bonding to the polymer surface of non-conductive protein have been used as a measure of re-binding. It was found that when challenged with 1 part per million protein in solution, the current reductions for the lysozyme and cytochrome c imprinted electrodes were 30.3 and 66.2%, respectively, compared to 4.5 and 29.9% for their respective control electrodes. All measurements carried out at -0.1 V with Ag/AgCl reference.     

Imprinted polymer layer for recognizing double-stranded DNA

A method of preparing a thin polymer layer able to recognize double-stranded DNA (dsDNA) was developed by using 2-vinyl-4,6-diamino-1,3,5-triazine (VDAT) as a functional monomer for creating a DNA-imprinted polymer. The formation of hydrogen bonds between VDAT and A-T base pairs in dsDNA was confirmed by measuring the effects of VDAT on the melting point and the NMR and CD spectra of dsDNA. An imprinted polymer that can recognize dsDNA of the verotoxin gene was prepared by polymerizing VDAT, acrylamide, a crosslinking agent, and the template verotoxin dsDNA on a silanized glass surface. The specificity of this polymer layer for binding verotoxin dsDNA was investigated by using fluorescent-labelled dsDNAs. The fluorescence intensity of the polymer layer after binding verotoxin dsDNA was twice as high as after binding oligo(dG)-oligo(dC), indicating that verotoxin dsDNA was preferentially bound to the polymer imprinted with verotoxin dsDNA. The kinetics of verotoxin dsDNA binding to the imprinted polymer were analyzed by surface plasmon resonance measurements. The dissociation constant (KD) was low, of the order of 10(-9)M.     

Monitoring of cAMP-imprinted polymer by fluorescence spectroscopy

Conventional functional monomers together with fluorescent monomer, trans-4-[p-(N,N-dimethylamino)styryl]-N-vinylbenzylpyridinium chloride (vb-DMASP), were copolymerised in the presence of a target molecule, nucleotide-cAMP that acted as a molecular template. The polymer was copolymerised in thin-layer films. After removal of the template the functionalised cavities that exist in the fluorescent material are able to specifically bind the template. Subsequent adsorption of the template-cAMP causes quenching of fluorescence of the polymer. The specific photochemical processes accompanying the template adsorption are discussed further. The imprinted polymers monitored by both steady-state and time-resolved fluorescence techniques show specificity and selectivity of binding of the template on the imprinted functionalised cavities.     

Synthesis and evaluation of a selective molecularly imprinted polymer for the contraceptive drug levonorgestrel

A molecularly imprinted polymer (MIP) has been prepared using levonorgestrel (LEV) as template. The polymer was synthesised in a non-covalent approach using methacrylic acid (MAA) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as cross-linking monomer via a free radical polymerization. An equivalent blank polymer was also synthesised in the absence of the template compound. Batch adsorption experiments were used to evaluate the binding affinity of the imprinted polymer. After packing MIP into a stainless steel column (150 mm x 4.6 mm i.d.), retention and elution of the template and related compounds were evaluated by high-performance liquid chromatography (HPLC). This LEV imprinted polymer was further applied for selective solid phase extraction (SPE) of LEV from human serum. It was confirmed that the binding ability of the prepared MIP for LEV was essentially sufficient in the presence of other compounds coexisting in serum sample. Therefore, as a selective and efficient solid phase material, LEV imprinted polymer has a high potential application in analysis of this steroidal hormone in clinical purposes.     

Synthetic cinchonidine receptors obtained by cross-linking linear poly(methacrylic acid) derivatives as an alternative molecular imprinting technique

A molecular imprinting approach to construct synthetic receptors was examined, wherein a linear pre-polymer bearing functional groups for intermolecular interaction with a given molecule is cross-linked in the presence of the molecule as a template, and subsequent removal of the template from the resultant network-polymer is expected to leave a complementary binding site. Poly(methacrylic acid) (PMAA) derivatized with a vinylbenzyl group as a cross-linkable side chain was utilized as the pre-polymer for the molecular imprinting of a model template, (-)-cinchonidine. Selectivity of the imprinted polymer was evaluated by comparing the retentions of the original template, (-)-cinchonidine and its antipode (+)-cinchonine in chromatographic tests, exhibiting a selectivity factor up to 2.4. By assessment of the imprinted polymers in a batch mode, a dissociation constant at 20 degrees C for (-)-cinchonidine was estimated to be K (d) = 2.35 x 10(-6) M (the number of binding sites: 4.54 x 10(-6) mol/g-dry polymer). The displayed affinity and selectivity appeared comparable to those of an imprinted polymer prepared by a conventional monomer-based protocol, thus showing that the pre-polymer, which can be densely cross-linked, is an alternative imprinter for developing template-selective materials. (-)-Cinchonidine-imprinted polymers were prepared and assessed using the pre-polymers bearing different densities of the vinylbenzyl group and different amounts of the cross-linking agent to examine the appropriate density of the cross-linking side chain that was crucial for developing the high affinity and selectivity of the imprinted polymers.     

Metal ion mediated imprinting for electrochemical enantioselective sensing of L-histidine at trace level

Enantioselective trace level sensing of l-histidine (limit of detection, 1.980 ngm L(-1), S/N=3) was feasible with the use of a typical, reproducible, and rugged complex imprinted polymer-based pencil graphite electrode, in aqueous samples. In the present instance, the Cu(2+) ion-mediated imprinting of l-histidine in an molecularly imprinted polymer motif actually helped upbringing electrocatalytic activity to respond an enhanced differential pulse anodic stripping voltammetric oxidation peak of l-histidine, without any cross-reactivity and false-positive, in real samples. The proposed sensor could be considered suitable for the practical applications in biomarking histedinemia, a disease associated with L-histidine metabolic disorders, in clinical settings.     

Binding of Cu(2+)-beta-cyclodextrin complex to calf thymus DNA.

Cu(2+)-beta-cyclodextrin (1:1) complex has been found by UV, fluorescence and CD spectroscopy, polarimetry and gel electrophoresis to bind reversibly to calf thymus DNA. Using UV the binding constant was found to be 45280 +/- 7100 M-1. The binding of the complex Cu(2+)-BCD with DNA was stronger than that of free Cu2+. However the ternary complex formed thus was destroyed by EDTA.     

Synchronous fluorescence, UV-visible spectrophotometric, and voltammetric studies of the competitive interaction of bis(1,10-phenanthroline)copper(II) complex and neutral red with DNA

Constant wavelength synchronous fluorescence spectroscopy (CW-SFS), UV-visible absorption spectroscopy, and cyclic and differential pulse voltammetry were applied to investigate the competitive interaction of DNA with the bis(1,10-phenanthroline)copper(II) complex cation ([Cu(phen)(2)](2+)) and a fluorescence probe, neutral red dye (NR), in a tris-hydrogen chloride buffer (pH 7.4). The results show that both the [Cu(phen)(2)](2+)and the NR molecules can intercalate competitively into the DNA double-helix structure. The cyclic voltammetry method showed that both anodic and cathodic currents of [Cu(phen)(2)](2+) decreased on addition of the DNA and the intercalated [Cu(phen)(2)](2+)-DNA complex formed (beta = (4.14 +/- 0.24) x 10(3)). CW-SFS measurements were facilitated by the use of the three-way resolution of the CW-SFS for NR, [Cu(phen)(2)](2+), and NR-DNA. The important constant wavelength (CW) interval, Deltalambda, was shown to vary considerably when optimized (135, 58, and 98 nm for NR, NR-DNA, and [Cu(phen)(2)](2+), respectively). This approach clearly avoided the errors that otherwise would have arisen from the common assumption that Deltalambda is constant. Furthermore, a chemometrics approach, parallel factor analysis (PARAFAC), was applied to resolve the measured three-way CW-SFS data, and the results provided simultaneously the concentration information for the three reaction components, NR, [Cu(phen)(2)](2+), and NR-DNA, for the system at each equilibrium point. The PARAFAC analysis indicated that the intercalation of the [Cu(phen)(2)](2+) molecule into the DNA proceeds by exchanging with the NR probe and can be attributed to two parallel reactions. Comprehensive information was readily obtained; the replacement of the intercalated NR commenced immediately on introduction of [Cu(phen)(2)](2+), approximately 50% of NR was replaced by [Cu(phen)(2)](2+) at a concentration of 0.45 x 10(-5) mol L(-1), and nearly all of the NR was replaced at a [Cu(phen)(2)](2+) concentration of 2.50 x 10(-5) mol L(-1). This work has the potential to improve extraction of information from the fluorescence intercalator displacement (FID) assay.     

Synthesis of molecularly imprinted polymers using a functionalized initiator for chiral-selective recognition of propranolol

We present a new concept of synthesis for preparation of molecularly imprinted polymers using a functionalized initiator to replace the traditional functional monomer. Using propranolol as a model template, a carboxyl-functionalized radical initiator was demonstrated to lead to high-selectivity polymer particles prepared in a standard precipitation polymerization system. When a single enantiomer of propranolol was used as template, the imprinted polymer particles exhibited clear chiral selectivity in an equilibrium binding experiment. Unlike the previous molecular imprinting systems where the active free radicals can be distant from the template-functional monomer complex, the method reported in this work makes sure that the actual radical polymerization takes place in the vicinity of the template-associated functional groups. The success of using functional initiator to synthesize molecularly imprinted polymers brings in new possibilities to improve the functional performance of molecularly imprinted synthetic receptors.     

Molecularly imprinted polymer using-p-hydroxybenzoic acid, p-hydroxyphenylacetic acid and p-hydroxyphenylpropionic acid as templates.

Molecularly imprinted polymers (MIPs) using p-hydroxybenzoic acid (p-HB), p-hydroxyphenylacetic acid (p-HPA) and p-hydroxyphenylpropionic acid (p-HPPA) as templates were synthesized. The performance of the templates and their analogues on polymer-based high performance liquid chromatography (HPLC) columns was studied. The imprinting effect of the MIP using p-HB as template is more obvious than that of MIP using either p-HPA or p-HPPA as template, and the mixture of p-HB and p-HPA can be well separated on the MIP using p-HB as template, but not on the blank. Interestingly, the recognition of MIP (p-HB as the template) to p-HB showed a synergistic effect. The retention factor of p-HB is not the sum of those of phenol and benzoic acid. We also found that the imprinting effect decreased when increasing the concentration of acetic acid in mobile phase. The possible reason is that acetic acid molecules occupied the binding sites of the polymer, thereby decreasing the concentration of binding sites. Furthermore, polymers, which showed specificity to 3,4-dihydroxybenzoic acid, can be prepared with p-HB as template. It is thus possible to synthesize a specific polymer for a compound that is either expensive or unstable by using a structurally similar compound as template.     

Systematic cross-selectivity study of the factors influencing template receptor interactions in molecularly imprinted nitrogen heterocycles

A systematic cross-selectivity study involving a series of structurally related N-methylated and non-methylated substituted pyridines was performed with the aim of evaluating the parameters responsible for template receptor binding in molecularly imprinted polymers. Variation in binding of substrate structure permitted evaluation of the steric restraints of the imprinted cavity. The electrostatic effects, primarily hydrogen-bonding, were investigated through rebinding in chloroform and acetonitrile. All species were non-covalently imprinted in thermoinduced methacrylic acid-ethylene glycol dimethacrylate co-polymers. Evaluation of template properties indicate that a correlation exists between non-specific binding and template basicity for a series of structural isomers. A correlation between non-specific binding and hydrophobicity was also identified for templates increasing in alkyl character. However no overall correlation was observed, as it was speculated that these factors may be competing. All species imprinted, with the exception of 2-dimethylaminopyridine, produced a selective response for the template species. Varying degrees of cross-selectivity were observed for each imprinted polymer. Polymers imprinted with templates of higher basicity demonstrated a greater degree of cross-selectivity relative to those of lower basicity. While overall binding was reduced in acetonitrile relative to chloroform, specificity was increased. This highlights the intrinsic difference in binding sites within imprinted and non-imprinted sites of the polymer. Finally, while the ability of the template species to form a co-operative interaction may be advantageous in producing a selective imprint it is not a prerequisite. For species based on this co-operative interaction the steric environment in the immediate proximity to the binding functionalities are critical to recognition. Steric hindrance of non-functionally active groups can dramatically impair the formation of interactions.     

Physicochemical characterization of the microbial Fe2+ chelator proferrorosamine from Pseudomonas roseus fluorescens.

The microbial chelating compound proferrorosamine A, produced by Pseudomonas roseus fluorescens, formed a complex with Fe2+ of which the apparent stability constant was found to be 10(23). The following order of increasing stability constants of metal complexes with proferrorosamine was established as: Ba2+, Ca2+, Mg2+, Mn2+ less than Hg2+ less than Zn2+ less than Pb2+ less than Co2+ less than Cu2+ congruent to Fe2+ less than Ni2+. Only Ni(2+)-proferrorosamine had a stability constant which was established as: Ba2+, Ca2+, Mg2+, Mn2+ less than Hg2+ less than Zn2+ less than Pb2+ less than Co2+ less than Cu2+ congruent to Fe2+ less than Ni2+. Only Ni(2+)-proferrorosamine had a stability constant which was ca 32 times higher than Fe(2+)-proferrorosamine. Because of the production of proferrorosamine the growth of Ps. roseus fluorescens was not inhibited in iron limiting media by the addition of 0.15 mmol/l of the weaker chemical Fe2+ chelator 2,2'-dipyridyl. This contrasted with the proferrorosamine-negative mutant K2 and Ps. stutzeri, which only produces Fe(3+)-chelating siderophores. Furthermore, it was found that proferrorosamine was able to dissolve Fe2+ from stainless steel. These results show that proferrorosamine is a strong and selective Fe2+ chelator which could be used as an alternative for the toxic 2,2'-dipyridyl to control lactic acid fermentations.     

A molecular imprinted polymer with recognition properties towards the carcinogenic mycotoxin ochratoxin A

A molecularly imprinted polymer which recognises the mycotoxin ochratoxin A was prepared using the mimic N-(4-chloro-1-hydroxy-2-naphthoylamido)-(L) -phenylalanine as a template. The polymer was obtained by dissolving the template, methacrylic acid and ethylendimethacrylate in chloroform and polymerising the mixture by thermal treatment at 60°C. The monolith obtained was crushed, sieved to 30–90 m and extensively washed till the template could no longer be found in the washing solution. The binding properties towards the template, ochratoxin A and several related molecules were measured by eluting with acetonitrile and chloroform a HPLC column packed with the imprinted polymer. The experimental results show that the polymer recognises not only the template well, but also the ochratoxin A. The specific molecular recognition effect is due to hydrogen bond interactions but in order to assure the full recognition effect adjunctive steric factors are necessary. The magnitude of these interactions can be controlled by the use of limited amounts of acetic acid in the mobile phase.From the measurement of the relative selectivity it was found that only the simultaneous presence of the carboxyl, the phenolic hydroxyl and certain peculiar substructures such as the chlorine atom assures the whole recognition of the template.     

An innovative approach to molecularly imprinted capillaries for polar templates by grafting polymerization

Molecularly imprinted polymers have been successfully used as selective stationary phases in capillary electrophoresis. Notwithstanding, this technique suffers from several drawbacks as the loss of molecular recognition properties in aqueous media and the lack of feasibility for imprinted systems directed towards highly polar templates soluble in aqueous environments only. Thus, the preparation of imprinted polymers for highly polar, water-soluble analytes, represents a challenge. In this work, we present an innovative approach to overcome these drawbacks. It is based on a surface molecular imprinting technique that uses preformed macromonomers as both functional recognition elements and cross-linking agents. A poly-2-hydroxyethyl-co-methacrylic acid linear polymer was grafted from the surface of silica capillaries. The grafted polymer was exhaustively esterified with methacrylic anhydride to obtain polyethylendimethacrylate-co-methacrylic acid linear chains. Then, as a proof of concept, an adequate amount of a very polar template like penicillin V was added in a hydro-organic mixture, and a thin layer of imprinted polymer was obtained by cross-linking the polymer linear chains. The binding behaviour of the imprinted and non-imprinted capillaries was evaluated in different separation conditions in order to assess the presence of template selectivity and molecular recognition effects. The experimental results clearly show that this innovative kind of imprinted material can be easily obtained in very polar polymerization environments and that it is characterized by enhanced molecular recognition properties in aqueous buffers and good selectivity towards the template and strictly related molecules.     

A heavy metal biotrap for wastewater remediation using poly-gamma-glutamic acid

Poly-gamma-glutamic acid (gamma-PGA) obtained from Bacillus licheniformis ATCC 9945 was evaluated as a potential biosorbent material for use in the removal of heavy metals from aqueous solution. Copper (Cu(2+)) was chosen as the model heavy metal used in these studies since it is extensively used by electroplating and other industries, has been the model for many other similar studies, and can be easily assayed through a number of convenient methods. Cu(2+)-gamma-PGA binding parameters under varying conditions of pH, temperature, ionic strength, and in the presence of other heavy metal ions were determined for the purified biopolymer using a specially designed dialysis apparatus. Applying the Langmuir adsorption isotherm model showed that gamma-PGA had a copper capacity approaching 77.9 mg/g and a binding constant of 32 mg/L (0.5 mM) at pH 4.0 and 25 degrees C. Cu(2+)-gamma-PGA adsorption was relatively temperature independent between 7 and 40 degrees C, while an increase in ionic strength led to a decrease in metal ion binding. Cd(2+) and Zn(2+) ions compete with Cu(2+) for binding sites on the gamma-PGA biopolymer. Metal uptake by gamma-PGA was further tested using a tangential flow filtration apparatus in a diafiltration mode in which metal was continually processed through a dilute solution of gamma-PGA without allowing for equilibrium to be established. The circulating polymer solution was able to complex metal as well as successfully prevent passage of unbound copper ions present in solution through the membrane. Using 500 mL of a 0.2% gamma-PGA solution, up to 97% of a 50 mg/L copper sulfate solution processed at a flow rate of 115 mL/min was retained by the polymer. For a 10 mg/L solution of Cu(2+) as copper sulfate, filtrate concentrations of Cu(2+) never rose above 0.6 mg/L while processing 2.5 L of dilute copper sulfate.     

Development of fructosyl valine binding polymers by covalent imprinting

Molecularly imprinted polymers (MIPs) against fructosyl valine (Fru-Val), the N-terminal constituent of hemoglobin A1c β-chains, were prepared by cross-linking of β-d-Fru-Val-O-bis(4-vinylphenylboronate) with an excess of ethylene glycol dimethacrylate (EDMA) or trimethylolpropane trimethacrylate (TRIM). Control MIPs were prepared in analogy by cross-linking the corresponding vinylphenylboronate esters of fructose and pinacol. After template extraction batch rebinding studies were performed using different pH values and buffer compositions. The Fru-Val imprinted TRIM cross-linked polymer binds about 1.4 times more Fru-Val than the fructose imprinted polymer and 2.7 times more Fru-Val than pinacol imprinted polymer. The highest imprinting effect was obtained in 100 mM sodium carbonate/10% methanol (pH 11.4). The TRIM cross-linked Fru-Val imprinted polymer showed a better specificity than the EDMA cross-linked polymer. The binding of valine was very low. Thermo gravimetric analysis indicated that the generated Fru-Val imprinted polymer has high thermo stability. No change in binding was observed after incubation of the polymers in buffer at 80 °C for 36 h. Since the functional group of the polymers (phenyl boronic acid) targets the sugar part of Fru-Val the imprint technique used should also be applicable for the development of MIPs against other glycated amino acids and peptides.     

The C2A domain of synaptotagmin exhibits a high binding affinity for copper: implications in the formation of the multiprotein FGF release complex

Human acidic fibroblast growth factor (hFGF-1) is a potent mitogen and is involved in the regulation of key cellular process such as angiogenesis, differentiation, and morphogenesis. hFGF-1 is a signal peptide-less protein that is released into the extracellular compartment as a multiprotein complex consisting of S100A13, synaptotagmin (Syt1), and a hFGF-1 homodimer. Cu(2+) is known to play an important role in the formation of the multiprotein release complex. The source of Cu(2+) required for the formation of the multiprotein release complex is not clear. In this study, we show that the cytoplasmic C2A domain of synaptotagmin binds to Cu(2+) ions with high affinity. Results from the isothermal calorimetry (ITC), near-UV circular dichroism (CD), and absorption spectroscopy experiments suggest that four Cu(2+) ions bind per molecule of C2A domain. Far-UV CD and limited trypsin digestion analysis reveal that the C2A domain undergoes a mild conformational change upon binding to Cu(2+). Competition experiments monitored by ITC and fluorescence resonance energy transfer indicate that Cu(2+) and Ca(2+) ions share common binding sites on the C2A domain. Cu(2+) ions compete with and replace Ca(2+) ions bound to the C2A domain. Two-dimensional nuclear magnetic resonance spectroscopy data clearly show that Cu(2+) ions bind to the Ca(2+) binding sites in the loops (loops 1-3) located at the apex of the structure of the C2A domain. In addition, there is a unique Cu(2+) binding site located in the loop connecting beta-strands 7 and 8. It appears that the C2A domain provides the Cu(2+) ions required for the formation of the multiprotein FGF release complex.