Purification and biochemical characterization of angiotensin I-converting enzyme (ACE) from ostrich lung: The effect of 2,2,2-trifluoroethanol on ACE conformation and activity

This work reports the purification and biochemical characterization of angiotensin I-converting enzyme (ACE) from ostrich (Struthio camelus) lung. The molecular weight of the purified enzyme was approximately evaluated to be 200 kDa and the maximum enzyme activity was observed at pH 7.5. The enzyme activity was increased by detergents of Triton X-100 (0.01%), cetyltrimethylammonium bromide (CTAB) (0.1 and 1 mM) and sodium dodecyl sulfate (SDS) (0.1 mM), while decreased by Triton X-100 (1% and 10%) and SDS (1 mM and 10 mM). The secondary and tertiary structure and activity of ACE in the absence and presence of trifluoroethanol (TFE) were investigated using circular dichroism, fluorescence quenching and UV–visible spectroscopy, respectively. Our results revealed that TFE stabilizes ACE at low concentrations, while acts as a denaturant at higher concentration (20%). The K_m, K_cat and K_cat/K_m values of ostrich ACE towards FAPGG were 0.8 × 10^?4 M, 59,240 min^?1 and 74 × 10⁷ min^?1 M^?1, respectively. The values of IC₅₀ and K_i for captopril were determined to be 36.5 nM and 16.6 nM, respectively. In conclusion, ostrich lung ACE is a new enzyme which could be employed as a candidate for studying ACE structure and its natural or synthetic inhibitors.     

Characterization and PCR application of a new high-fidelity DNA polymerase from Thermococcus waiotapuensis

The family B DNA polymerase gene from the euryarchaeon Thermococcus waiotapuensis (Twa) contains an open reading frame of 4404 bases that encodes 1467 amino acid residues. The gene is split by two intein-coding sequences that forms a continuous open reading frame with the three polymerase exteins. Twa DNA polymerase genes with (whole gene) and without (genetically intein-spliced) inteins were expressed in Escherichia coli Rosetta(DE3)pLysS. The inteins of the expressed whole gene were easily spliced during purification. The molecular mass of the purified Twa DNA polymerase was about 90 kDa, as estimated by SDS-PAGE. The optimal pH for Twa DNA polymerase activity was 6.0 and the optimal temperature was 75 °C. The enzyme was activated by magnesium ions. The half-life of the enzyme at 99 °C was about 4 h. The optimal buffer for PCR with Twa DNA polymerase was 50 mM Tris–HCl (pH 8.2), 2.0 mM MgCl₂, 30 mM KCl, 2.0 mM (NH₄)₂SO₄, 0.01% Triton X-100, and 0.005% BSA. The PCR fidelity of Twa DNA polymerase was higher than Pfu, KOD and Vent DNA polymerases. A ratio of 15:1 Taq:Twa DNA polymerase efficiently facilitated long-range PCR.     

Immobilization of horseradish peroxidase on activated wool

This work is aimed to immobilize partially purified horseradish peroxidase (HRP) on wool activated by multifunctional reactive center, namely cyanuric chloride. The effect of cyanuric chloride concentration, pH and enzyme concentration on immobilization of HRP was studied. FT-IR and SEM analyses were detected for wool, activated wool and immobilized wool-HRP. The wool-HRP, prepared at 2% (w/v) cyanuric chloride and pH 5.0, retained 50% of initial activity after seven reuses. The wool-HRP showed broad optimum pH at 7.0 and 8.0, which was higher than that of the soluble HRP (pH 6.0). The soluble HRP had an optimum temperature of 30 °C, which was shifted to 40 °C for immobilized enzyme. The soluble and wool-HRP were stable up to 30 and 40 °C after incubation for 1 h, respectively. The apparent kinetic constant values (K_ms) of wool-HRP were 10 mM for guiacol and 2.5 mM for H₂O₂, which were higher than that of soluble HRP. The wool-HRP was remarkably more stable against proteolysis mediated by trypsin. The wool-HRP exhibited more resistance to heavy metal induced inhibition. The wool-HRP was more stable to the denaturation induced by urea, Triton X-100, isopropanol, butanol and dioxan. The wool-HRP was found to be the most stable under storage. In conclusion, the wool-HRP could be more suitable for several industrial and environmental purposes.     

Biochemical and structural characterization of a detergent-stable serine alkaline protease from seawater haloalkaliphilic bacteria

An extracellular protease from a newly isolated seawater haloalkaliphilic bacterium, haloalkaliphilic bacteria Ve₂-20-9₁ [HM047794], was purified and characterized. The enzyme is a monomer with a 37.2 kDa estimated molecular weight. It catalyzed reactions in the pH range 8–11 and performed optimally at pH 10. While maximal activity occurred at 50 °C, the temperature profile shifted from 50 to 80 °C in 1–3 M NaCl. The enzyme's thermal stability was probed using circular dichroism (CD) spectroscopy with NaCl at 50 and 70 °C. The changes in the enzyme's secondary structure were also analyzed using Fourier transform infrared spectroscopy (FTIR). The N-terminal amino acid sequence GKDGPPGLCGFFGCI exhibited low homology with other bacterial proteases, which highlights the enzyme's novelty. The enzyme was labile in anionic surfactant (1% w/v SDS) but showed stability in non-ionic surfactants (Tween 20, Tween 80 and Triton X-100 all 1% v/v), commercial detergents, and oxidizing and reducing agents. The enzyme's excellent stability in commercial detergents highlights its potential as a detergent additive.     

Immobilized Triton X-100-assisted refolding of Green Fluorescent Protein-Tobacco Etch Virus protease fusion protein using β-cyclodextrin as the eluent

A new protein refolding technique based on the use of the non-charged detergent Triton X-100 immobilized to the cross-linked agarose gel Sepharose High Performance has been developed. The new solid phase was used in combination with soluble β-cyclodextrin (β-CD) to refold recombinant Green Fluorescent Protein fused to Tobacco Etch Virus protease (GFPTEVP) expressed as inclusion bodies in E. coli. Previous attempts to refold recombinant GFPTEVP by dilution had failed. In the new procedure a column packed with Triton X-100-coupled Sepharose High Performance was used to capture unfolded GFPTEVP followed by elution using an increasing β-CD concentration gradient. The yield of properly refolded GFPTEVP was 46% at a protein concentration of 380 μg/ml. In contrast, dilution refolding of GFPTEVP at 200 μg/ml refolding buffer resulted in only 4.7% of native protein.     

Extraction and purification of a lectin from small black kidney bean (Phaseolus vulgaris) using a reversed micellar system

Lectin from crude extract of small black kidney bean (Phaseolus vulgaris) was successfully extracted using the reversed micellar extraction (RME). The effects of water content of organic phase (W_o), ionic strength, pH, Aerosol-OT (AOT) concentration and extraction time on the forward extraction and the pH and ionic strength in the backward extraction were studied to optimize the extraction efficiency and purification factor. Forward extraction of lectin was found to be maximum after 15 min of contact using 50 mM AOT in organic phase with W_o 27 and 10 mM citrate-phosphate buffer at pH 5.5 containing 100 mM NaCl in the aqueous phase. Lectin was backward extracted into a fresh aqueous phase using sodium-phosphate buffer (10 mM, pH 7.0) containing 500 mM KCl. The overall yield of the process was 53.28% for protein recovery and 8.2-fold for purification factor. The efficiency of the process was confirmed by gel electrophoresis analysis.     

Kinetic study of the colloidal and enzymatic stability of β-galactosidase,for designing its encapsulation route through sol–gel route assisted by Triton X-100 surfactant

The kinetic study of the colloidal and enzymatic stability for the β-galactosidase of Bacillus circulans was carried out in function of the presence of Triton X-100 surfactant, under orbital agitation and varying the pH and temperature. The correlation between the Dynamic Light Scattering and enzyme assay data, supported by z-potential and Differential Scanning Calorimetry analyses, gave insights about the mechanism of the protective role of the surfactant against the enzyme deactivation during its incubation. The best conditions for preserving the enzymatic activity, under orbital agitation, were: presence of 1 × 10⁻³M Triton X-100, at pH 6.0 and 25 °C or 40 °C during less than 24 h, even in the presence of 0.1 M sodium cations or 4% ethanol. As these conditions also affect the polycondensation of the siliceous species and the enzyme-silica interactions, these could be considered as primary information for designing and optimizing an encapsulation route of β-galactosidase in silica, by a sol–gel process assisted by surfactant.     

Effects of detergents on the West Nile virus protease activity

Detergents such as Triton X-100 are often used in drug discovery research to weed out small molecule promiscuous and non-specific inhibitors which act by aggregation in solution and undesirable precipitation in aqueous assay buffers. We evaluated the effects of commonly used detergents, Triton X-100, Tween-20, Nonidet-40 (NP-40), Brij-35, and CHAPS, on the enzymatic activity of West Nile virus (WNV) protease. Unexpectedly, Triton X-100, Tween-20, and NP-40 showed an enhancement of in vitro WNV protease activity from 2 to 2.5-fold depending on the detergent and its concentration. On the other hand, Brij-35, at ?0.001% enhanced the protease activity by 1.5-fold and CHAPS had the least enhancing effect. The kinetic analysis showed that the increase in protease activity by Triton X-100 was dose-dependent. Furthermore, at Triton X-100 and Tween-20 concentrations higher than 0.001%, the inhibition of compound B, one of the lead compounds against WNV protease identified in a high throughput screen (IC₅₀ value of 5.7 ± 2.5 μM), was reversed. However, in the presence of CHAPS, compound B still showed good inhibition of WNV protease. Our results, taken together, indicate that nonionic detergents, Triton X-100, Tween, and NP-40 are unsuitable for the purpose of discrimination of true versus promiscuous inhibitors of WNV protease in high throughput assays.     

Purification,characterization and secondary structure elucidation of a detergent stable,halotolerant, thermoalkaline protease from Bacillus cereus SIU1

A thermoalkaline protease with a molecular weight of 22 kDa was purified from the Bacillus cereus SIU1 strain using a combination of Q-Sepharose and Sephadex G-75 chromatography. The kinetic analyses revealed the K_m, V_max and k_cat to be 1.09 mg ml^?1, 0.909 mg ml^?1 min^?1 and 3.11 s^?1, respectively, towards a casein substrate. The protease was most active and stable at pH 9.0 and between a temperature range of 45–55 °C. It was fully stable at 0.0–2.0% and moderately stable at 2.5–10.0% (w/v) sodium chloride. Phenyl methyl sulfonyl fluoride, ethylene diamine tetra acetic acid and ascorbic acid were inhibitory with regard to enzyme activity, whereas cysteine, β-mercaptoethanol, calcium, magnesium, manganese and copper at concentration of 1.0 mM increased enzyme activity. Sodium dodecyl sulfate, Triton X-100, Tween 80, hydrogen peroxide and sodium perborate significantly enhanced protease activity at 0.1 and 1.0% concentrations. In the presence of 0.1 and 1.0% (w/v) detergents, the protease was fairly stable and retained 50–76% activity. Therefore, it may have a possible application in laundry formulations. An initial analysis of the circular dichroism (CD) spectrum in the ultraviolet range revealed that the protease is predominantly a β-pleated structure and a detailed structural composition showed ～50% β-sheets. The CD-based conformational evaluation of the protease after incubation with modulators, metal ions, detergents and at different pH values, revealed that the change in the β-content directly corresponded to the altered enzyme activity. The protease combined with detergent was able to destain blood stained cloth within 30 min.     

Surfactant-mediated permeabilization of Pseudomonas putida KT2440 and use of the immobilized permeabilized cells in biotransformation

Surfactants were used to permeabilize cells of Pseudomonas putida KT2440 so as to maximize retention of the arginine deiminase (ADI) activity within the treated cells. The surfactants cetyltrimethylammoniumbromide (CTAB), sodium dodecyl sulfate (SDS) and Triton X100 were tested separately. Statistical models were developed for the effects on the ADI activity of the following factors: the concentration of the surfactant, the length of the treatment period and the concentration of the cells. For all surfactants, the concentration of cells was the most significant factor in influencing permeabilization. All permeabilization treatments used mild conditions (pH 7, 37 °C). The permeabilized cells were immobilized in alginate beads for the biotransformation of arginine to citrulline. The optimal conditions for immobilization and biotransformation were as follows: 2% (w/v, g/100 mL) sodium alginate, 100 g/L of treated cells, 40 mM arginine, pH 6.0, a temperature of 35 °C and an agitation speed of 150 rpm. The immobilized biocatalyst retained nearly 90% of its initial activity after nine cycles of repeated use in batch operations. In contrast, the freely suspended cells were barely active after the second use cycle.     

Expression and characterization of antimicrobial peptide CecropinAD in the methylotrophic yeast Pichia pastoris

Hybrid antibacterial peptide CecropinAD (CAD) is a linear cationic peptide that has potent antimicrobial properties without hemolytic activity. To explore a new approach to express the hybrid peptide CAD in the methylotrophic yeast Pichia pastoris, the cDNA sequence encoding CAD was obtained by recursive PCR (rPCR) and cloned into the vector pPICZα-A. The Sac I-linearized recombinant plasmid pPICZα-CAD was transformed into P. pastoris GS115 by electroporation. Expression of recombinant CAD was induced for 96 h with 1.0% methanol at 28 °C, pH 5.0. The recombinant CAD was purified by two steps of reversed-phase HPLC and 1.8 mg pure active CAD was obtained from 100 ml culture. Tricine-SDS-PAGE and mass spectrometry analyses demonstrated that the molecular weight of the purified CAD was 3.8 kDa. Analysis of circular dichroism (CD) revealed that CAD mainly has α-helixes in the presence of 10 mM phosphate buffer (pH 7.2), 50% TFE/water solution (pH 2.0), or 30 mM SDS (pH 10.8). FACScan analysis showed that the antibacterial mechanism of CAD is to act on the cell membrane to disrupt bacterial cell structure. Antimicrobial assays demonstrated that recombinant CAD has a broad spectrum of anti-microbial property against fungi, as well as Gram-positive and Gram-negative bacteria, but does not have hemolytic activity against human erythrocytes. Our results suggest that recombinant antimicrobial peptide CAD may serve as an attractive candidate for the development of therapeutic antimicrobial drugs.     

Optimized method for the determination of itopride in human plasma by high-performance liquid chromatography with fluorimetric detection

A high-performance liquid chromatographic method with fluorescence detection for the determination of itopride in human plasma is reported. The sample preparation was based on liquid–liquid extraction of itopride from plasma with t-butylmethylether and dichloromethane (70:30, v/v) mixture followed by a back extraction of the analyte to the phosphate buffer (pH 3.2). Liquid chromatography was performed on an octadecylsilica column (55 mm × 4 mm, 3 μm particles), the mobile phase consisted of acetonitrile–triethylamine–15 mM dihydrogenpotassium phosphate (14.5:0.5:85, v/v/v), pH of the mobile phase was adjusted to 4.8. The run time was 3 min. The fluorimetric detector was operated at 250/342 nm (excitation/emission wavelength). Naratriptan was used as the internal standard. The limit of quantitation was 9.5 ng/ml using 0.5 ml of plasma. The method precision and inaccuracy were less than 8%. The assay was applied to the analysis of samples from a bioequivalence study.     

Thermophilic α-glucan phosphorylase from Clostridium thermocellum: Cloning,characterization and enhanced thermostability

ORF Cthe0357 from the thermophilic bacterium Clostridium thermocellum ATCC 27405 that encodes a putative α-glucan phosphorylase (αGP) was cloned and expressed in Escherichia coli. The protein with a C-terminal His-tag was purified by Ni²⁺ affinity chromatography; the tag-free protein obtained from a cellulose-binding module–intein–αGP fusion protein was purified through affinity adsorption on amorphous cellulose followed by intein self-cleavage. Both purified enzymes had molecular weights of ca. 81,000 and similar specific activities. The optimal conditions were pH 6.0–6.5 and 60 °C for the synthesis direction and pH 7.0–7.5 and 80 °C for the degradation direction. This enzyme had broad substrate specificities for different chain length dextrins and soluble starch. The thermal inactivation of this enzyme strongly depended on temperature, protein concentration, and certain addictives that were shown previously to benefit the protein thermostability. The half lifetime of 0.05 mg αGP/mL at 50 °C was extended by 45-fold to 90 h through a combined addition of 0.1 mM Mg²⁺, 5 mM DTT, 1% NaCl, 0.1% Triton X-100, and 1 mg/mL BSA. The enzyme with prolonged stability would work as a building block for cell-free synthetic enzymatic pathway biotransformations, which can implement complicated biocatalysis through assembly of a number of enzymes and coenzymes.     

Purification and characterization of a new alkali-thermostable lipase from Staphylococcus aureus isolated from Arachis hypogaea rhizosphere

An extracellular lipase (EC 3.1.1.3), SAL-PP1, from Staphylococcus aureus isolated from Arachis hypogaea rhizosphere was purified and characterized. The enzyme was purified using PALL'S Microsep centrifugal device (10 kD cut off), hydrophobic interaction (phenyl sepharose CL-4B column) and Superose-12 gel filtration chromatography and found to have a molecular mass of around 49 kDa. The gene fragment encoding the part of the catalytic site of the SAL-PP1 lipase was sequenced and the deduced amino acid sequence shows 93% identity with that of SEL3. SAL-PP1 showed activity against long acyl-chain triglycerides, various p-nitrophenyl esters and phospholipids. The enzyme shows high stability and activity after incubation with various metal ions (retained >90% activity in presence of Ca²⁺, Na⁺, Cu²⁺, Mg²⁺, Fe²⁺, or Hg²⁺ at 10 mM), organic solvents (retained >80% activity in presence of acetonitrile, ethanol, DMSO, methanol, isopropanol, toluene, or ethylene glycol at 10 mM), detergents (retained >70% activity in Triton X-100, Tween 80, or sodium deoxycholate at 10 mM) and irreversible inhibitors (retained >77% activity in presence of PMSF, leupetin, or β-mercaptoethanol, at 1 mM). Thermal inactivation studies revealed a temperature dependent unfolding of secondary structure of protein. SAL-PP1 showed maximal activity and stability at pH 8.0 and pH 9.0, respectively. The alkali-thermostability, organic solvent-tolerance and broad substrate specificity of this enzyme may have potential implications in detergent formulations, biotransformation, industries, and medicine.     

Characterization and PCR optimization of the thermostable family B DNA polymerase from Thermococcus guaymasensis

The gene encoding Thermococcus guaymasensis DNA polymerase (Tgu DNA polymerase) was cloned and sequenced. The 2328 bp Tgu DNA polymerase gene encoded a 775 amino acid residue protein. Alignment of the entire amino acid sequence revealed a high degree of sequence homology between Tgu DNA polymerase and other archaeal family B DNA polymerases. The Tgu DNA polymerase gene was expressed under the control of the T7lac promoter on pET-22b(+) in Escherichia coli BL21-CodonPlus(DE3)-RIL. The expressed enzyme was then purified by heat treatment followed by two steps of chromatography. The optimum pH and temperature were 7.5 and 80 °C, respectively. The optimal buffer for PCR with Tgu DNA polymerase consisted of 50 mM Tris–HCl (pH 8.2), 4 mM MgCl₂, 50 mM KCl, and 0.02% Triton X-100. Tgu DNA polymerase revealed 4-fold higher fidelity (3.17 × 10^?6) than Taq DNA polymerase (12.13 × 10^?6) and a faster amplification rate than Taq and Pfu DNA polymerases. Tgu DNA polymerase had an extension rate of 30 bases/s and a processivity of 150 nucleotides (nt). Thus, Tgu DNA polymerase has some faster elongation rate and a higher processivity than Pfu DNA polymerase. Use of different ratios of Taq and Tgu DNA polymerases determined that a ratio of 4:1 efficiently facilitated long PCR (approximately 15 kb) and a 3-fold lower error rate (4.44 × 10^?6) than Taq DNA polymerase.     

An efficient in vitro refolding of recombinant bacterial laccase in Escherichia coli

Laccases (benzenediol oxygen oxidoreductases, EC 1.10.3.2) are important multicopper enzymes that are used in many biotechnological processes. A recombinant form of laccase from Bacillus sp. HR03 was overexpressed in Escherichia coli BL-21(DE3). Inclusion body (IB) formation happens quite often during recombinant protein production. Hence, developing a protocol for efficient refolding of proteins from inclusion bodies to provide large amounts of active protein could be advantageous for structural and functional studies. Here, we have tried to find an efficient method of refolding for this bacterial enzyme. Solubilization of inclusion bodies was carried out in phosphate buffer pH 7, containing 8 M urea and 4 mM β-mercaptoethanol and refolding was performed using the dilution method. The effect of different additives was investigated on the refolding procedure of denaturated laccase. Mix buffer (phosphate buffer and citrate buffer, 100 mM) containing 4 mM ZnSO₄ and 100 mM sorbitol was selected as an optimized refolding buffer. Also Kinetic parameters of soluble and refolded laccase were analyzed.     

Rapid cloning,expression and purification of a novel high-activity alkaline phosphatase with detoxification of lipopolysaccharide

Lipopolysaccharide (LPS) is a bacterial endotoxin leading to endotoxemia. Its virulence factor ‘diphosphoryl lipid A’ can be abolished by alkaline phosphatase (AP). A novel AP gene (without introns) was cloned from Saccharomyces boulardii ATCC MYA-796 with a GenBank accession number KF471017, and the recombinant AP (rAP) was expressed as a soluble protein in Pichia pastoris X-33 with a yield of 43.66 mg/l at the end of 120 h of induction in a shaker flask. After purification by affinity-column chromatography, the purity of rAP was over 90%. The optimal reaction conditions of rAP were pH 9.6, temperature at 60 °C and 2 mM Mg²⁺ in diethanolamine buffer, and EDTA was a potent inhibitor of rAP activity. The specific activity of rAP was 9912.01 U/mg under the optimal conditions. Furthermore, rAP showed a broad dephosphorylation activity to LPS over a broad pH range (pH 2–10) in vitro and peaked at pH 4 in Tris–HCl buffer. After LPS dephosphorylated by rAP was injected intraperitoneally into mice, the serum level of tumor necrosis factor (TNF)-α was significantly reduced compared to that of the LPS group (p < 0.01). These findings suggest that rAP has great potential to cure diseases caused by LPS.     

Refolding,purification and characterization of an organic solvent-tolerant lipase from Serratia marcescens ECU1010

Expression of recombinant proteins as inclusion bodies in bacteria is one of the most efficient ways to produce cloned proteins, as long as the inclusion bodies can be successfully refolded. In this study, the different parameters were investigated and optimized on the refolding of denatured lipase. The maximum lipase activity of 5000 U/L was obtained after incubation of denatured enzyme in a refolding buffer containing 20 mM Tris–HCl (pH 7.0), 1 mM Ca²⁺ at 20 °C. Then, the refolded lipase was purified to homogeneity by anion exchange chromatography. The purified refolded lipase was stable in broad ranges of temperatures and pH values, as well as in a series of water-miscible organic solvents. In addition, some water-immiscible organic solvents, such as petroleum ether and isopropyl ether, could reduce the polarity and increase the nonpolarity of the refolding system. The results of Fourier transform infrared (FT-IR) microspectroscopy were the first to confirm that lipase refolding could be further improved in the presence of organic solvents. The purified refolded lipase could enantioselectively hydrolyze trans-3-(4-methoxyphenyl) glycidic acid methyl ester [(±)-MPGM]. These features render the lipase attraction for biotechnological applications in the field of organic synthesis and pharmaceutical industry.     

Characterization of a spore surface lipase from the biocontrol agent Metarhizium anisopliae

A Metarhizium anisopliae spore surface lipase (MASSL) strongly bound to the fungal spore surface has been purified by ion exchange chromatography on DEAE sepharose followed by ultrafiltration and hydrophobic interaction chromatography on phenyl sepharose. Electrophoretic analyses showed that the molecular weight of this lipase is ～66 kDa and pI is 5.6. Protein sequencing revealed that identified peptides in MASSL shared identity with several lipases or lipase-related sequences. The enzyme was able to hydrolyze triolein, the animal lipid cholesteryl stearate and all ρNP ester substrates tested with some preference for esters with a short acyl chain. The values of K_m and V_max for the substrates ρNP palmitate and ρNP laurate were respectively 0.474 mM and 1.093 mMol min^?1 mg^?1 and 0.712 mM and 5.696 mMol min^?1 mg^?1. The optimum temperature of the purified lipase was 30 °C and the enzyme was most stable within the most acid pH range (pH 3–6). Triton X-100 increased and SDS reduced enzyme lipolytic activity. MASSL activity was stimulated by Ca²⁺, Mg²⁺ and Co²⁺ and inhibited by Mn²⁺. The inhibitory effect on activity exerted by EDTA and EGTA was limited, while the lipase inhibitor Ebelactone B completely inhibited MASSL activity as well as PMSF. Methanol 0.5% apparently did not affect MASSL activity while β-mercaptoethanol activated the enzyme.     

Reactivation of the alternative oxidase of Yarrowia lipolytica by nucleoside monophosphates

The study of the effect of nucleoside phosphates on the activity of cyanide-resistant oxidase in the mitochondria and submitochondrial particles of Yarrowia lipolytica showed that adenosine monophosphate (5′-AMP, AMP) did not stimulate the respiration of intact mitochondria. The incubation of mitochondria at room temperature (25 °C) for 3–5 h or their treatment with ultrasound, phospholipase A, and the detergent Triton X-100 at a low temperature inactivated the cyanide-resistant alternative oxidase. The inactivated alternative oxidase could be reactivated with AMP. The reactivating effect of AMP was enhanced by azolectin. Some other nucleoside phosphates also showed reactivating ability in the following descending order: AMP = GMP > GDP > GTP > XMP > IMP. The apparent K_m values for AMP in reactivation of the alternative oxidase of submitochondrial particles or mitochondria treated with Triton X-100 and incubated at 25 °C were calculated. Physiological aspects of activation of the alternative oxidase are discussed in connection with the impairment of electron transfer through the cytochrome pathway.