A novel and efficient method for the isolation and purification of polysaccharides from lily bulbs by Saccharomyces cerevisiae fermentation

A water-soluble polysaccharide from lily bulbs was isolated and purified by Saccharomyces cerevisiae fermentation. Proteins present in lily bulb extract were removed by extracellular proteases secreted by S. cerevisiae during fermentation. This novel method differs from traditional protein removal methods. A suitable yeast strain was selected. Culture conditions were optimized. Response surface methodology (RSM) was utilized to evaluate the effects of variables on the lily polysaccharide (LP) yield and the protein removal ratio (PRR). The results of applying RSM revealed that the optimum fermentation conditions were 87.5 g L⁻¹ lily bulb powder, pH 5.6, and temperature 27.9 °C. When lily bulb extract was cultured with S. cerevisae under optimum conditions, the LP yield and the PRR were 6.56% and 91.46%, respectively. These values are in close agreement with the value predicted by the model. The resulting LP curding was further purified by DEAE Sepharose Fast Flow chromatography after isolation by alcohol precipitation post-fermentation. DEAE chromatography resulted in a fraction, LP-1 (yield: 4.46%) with a molecular weight of 65.0 kDa. LP-1 consisted of glucose and mannose in a molar ratio of 1:1.2.     

Line and birth season effects on plasma testosterone and oxidative stress parameters in testis of maturing rabbits

Oxidative stress plays a key role in the male reproductive function. Differences between rabbit breeds have been found for testis size, seminiferous tubule diameter, number and size of interstitial and germ cells, etc. Traits related to the redox system could also be affected by genetic factors. It is likely that differences between breeds for these traits would lead to differences in reproductive maturation and fertility.We have investigated in the present paper the age-related changes of the plasma testosterone (TST) concentration, superoxide anion (O₂^?) radical formation, superoxide dismutase (SOD) activity, catalase (CAT) activity and thiobarbituric acid-reactive substances (TBARs) level in testis of rabbits in two breeds selected for different aptitudes (Caldes for growth rate and Prat for litter size). The effect of birth season for these traits was also assessed.Major changes in parameters related to oxidative stress were observed at an early age and most probably can be explained by the concomitant changes in testicular structure and function. Both lines showed similar developmental profiles and levels for all the variables studied. There was no interaction between line and birth season, consequently environmental conditions affected both lines in the same manner. Significant differences between males born in different seasons were found for O₂^? (4.84 ± 0.19 RLU/mg tissue min versus 5.67 ± 0.19 RLU/mg tissue min), SOD (6.12 ± 0.11 U/mg protein versus 7.09 ± 0.11 U/mg protein) and CAT (0.058 ± 0.002 K/mg protein versus 0.040 ± 0.002 K/mg protein). Future studies should take into account differences between seasons for a more precise analysis.     

Application of an integrated statistical design to optimize the cold enzyme hydrolysis conditions for ethanol production

Cold enzyme hydrolysis was investigated on the ethanol production by Saccharomyces cerevisiae during simultaneous saccharification and fermentation (SSF) processing. An integrated statistical design, which incorporated single factor design, response surface methodology (RSM) and weighting coefficient method, was used to determine the optimum hydrolysis conditions leading to maximum biomass, ethanol concentration and starch utilization ratio. After the studied ranges of α-amylase, glucoamylase and liquefaction time were identified by single factor design, RSM was used to further optimize the hydrolysis conditions for each objective. The results showed that, under hydrolysis condition optimized with RSM, biomass, ethanol concentration and starch utilization ratio reached 4.401 ± 0.042 × 10⁸ cells/ml, 14.81 ± 0.23% (wt.%) and 94.52 ± 0.53%, respectively. Finally, multi-objective optimization (MOO) was applied to obtain a compromised result of three desirable responses by weighting coefficient methodology. Biomass of 4.331 ± 0.038 × 10⁸ cells/ml, ethanol concentration of 14.12 ± 0.21% (wt.%) and starch utilization ratio of 92.88 ± 0.21% were simultaneous obtained when hydrolysis at pH 5.9 for 114 min with 233 IU/g_starch α-amylase and 778 IU/g_starch glucoamylase. The optimized conditions were shown to be feasible and reliable through verification tests.     

Free radical scavenging activity from different extracts of leaves of Bauhinia vahlii Wight & Arn.

The objectives of this study were to determine phenolic content and antioxidant activities of chloroform, acetone, methanol and hot water extracts of Bauhinia vahlii leaves. The hot water extract afforded the highest yield (6.3%) while the lowest yield was obtained from the chloroform extract (2.1%). The methanol extract contains higher levels of total phenolics (48.7 ± 0.7 g GAE/100 g extract), tannins (21.7 ± 0.7 g GAE/100 g extract) and flavonoids (10.3 ± 0.2 RE/100 g extract). The extracts were subjected to assess their antioxidant potential using various in vitro systems such as DPPH, ABTS⁺, FRAP, OH, β-carotene linoleic acid bleaching system, phosphomolybdenum reduction and Fe²⁺ chelation. It is concluded that the methanolic extract of B. vahlii leaves have strong antioxidant potential. Further study is necessary for isolation and characterization of the active antioxidants, which may serve as a potential source of natural antioxidants.     

Application of seaweeds for the removal of lead from aqueous solution

Ten different seaweed species were compared on the basis of lead uptake at different pH conditions. The brown seaweed, Turbinaria conoides, exhibited maximum lead uptake (at pH 4.5) and hence was selected for further studies. Sorption isotherms, obtained at different pH (4–5) and temperature (25–35 °C) conditions were fitted using Langmuir and Sips models. According to the Langmuir model, the maximum lead uptake of 439.4 mg/g was obtained at optimum pH (4.5) and temperature (30 °C). The Sips model better described the sorption isotherms with high correlation coefficients at all conditions examined. Various thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated indicating that the present system was a spontaneous and endothermic process. Through potentiometric titrations, number of binding sites (carboxyl groups) and pK₁ were determined as 4.1 mmol/g and 4.4, respectively. The influence of co-ions (Na⁺, K⁺, Mg²⁺ and Ca²⁺) on lead uptake was well pronounced in the case of divalent ions compared to monovalent ions. The solution of 0.1 M HCl successfully eluted all lead ions from lead-loaded T. conoides biomass. The regeneration experiments revealed that the alga could be successfully reused for five cycles without any loss in lead biosorption capacity. A glass column (2 cm i.d. and 35 cm height) was used to study the continuous lead biosorption performance of T. conoides. At 25 cm (bed height), 5 ml/min (flow rate) and 100 mg/l (initial lead concentration), T. conoides exhibited lead uptake of 220.1 mg/g. The column was successfully eluted using 0.1 M HCl, with elution efficiency of 99.7%.     

The effect of ice-slushy consumption on plasma vasoactive intestinal peptide during prolonged exercise in the heat

The aim of this study was to determine the effect of exercise in the heat on thermoregulatory responses and plasma vasoactive intestinal peptide concentration (VIP) and whether it is modulated by ice-slushy consumption. Ten male participants cycled at 62% $\dot{V}{\mathrm{O}}_2$max for 90 min in 32 °C and 40% relative humidity. A thermoneutral (37 °C) or ice-slushy (−1 °C) sports drink was given at 3.5 ml kg⁻¹ body mass every 15 min during exercise. VIP and rectal temperature increased during exercise (mean±standard deviation: 4.6±4.4 pmol L⁻¹, P=0.005; and 1.3±0.4 °C, P<0.001 respectively) and were moderately associated (r=0.35, P=0.008). While rectal temperature and VIP were not different between trials, ice-slushy significantly reduced heat storage (P=0.010) and skin temperature (time×trial interaction P=0.038). It appears that VIP does not provide the signal linking cold beverage ingestion and lower skin temperature in the heat.     

Immobilization of acidic lipase derived from Pseudomonas gessardii onto mesoporous activated carbon for the hydrolysis of olive oil

Mesoporous activated carbon (MAC) derived from rice husk is used for the immobilization of acidic lipase (ALIP) produced from Pseudomonas gessardii. The purified acidic lipase had the specific activity and molecular weight of 1473 U/mg and 94 kDa respectively. To determine the optimum conditions for the immobilization of lipase onto MAC, the experiments were carried out by varying the time (10–180 min), pH (2–8), temperature (10–50 °C) and the initial lipase activity (49 × 10³, 98 × 10³, 147 × 10³ and 196 × 10³ U/l in acetate buffer). The optimum conditions for immobilization of acidic lipase were found to be: time—120 min; pH 3.5; temperature—30 °C, which resulted in achieving a maximum immobilization of 1834 U/g. The thermal stability of the immobilized lipase was comparatively higher than that in its free form. The free and immobilized enzyme kinetic parameters (K_m and V_max) were found using Michaelis–Menten enzyme kinetics. The K_m values for free enzyme and immobilized one were 0.655 and 0.243 mM respectively. The immobilization of acidic lipase onto MAC was confirmed using Fourier Transform-Infrared Spectroscopy, X-ray diffraction analysis and scanning electron microscopy.     

The kinetics of the reaction of nitrogen dioxide with iron(II)- and iron(III) cytochrome c

The reactions of NO₂ with both oxidized and reduced cytochrome c at pH 7.2 and 7.4, respectively, and with N-acetyltyrosine amide and N-acetyltryptophan amide at pH 7.3 were studied by pulse radiolysis at 23 °C. NO₂ oxidizes N-acetyltyrosine amide and N-acetyltryptophan amide with rate constants of (3.1±0.3)×10⁵ and (1.1±0.1)×10⁶ M⁻¹ s⁻¹, respectively. With iron(III)cytochrome c, the reaction involves only its amino acids, because no changes in the visible spectrum of cytochrome c are observed. The second-order rate constant is (5.8±0.7)×10⁶ M⁻¹ s⁻¹ at pH 7.2. NO₂ oxidizes iron(II)cytochrome c with a second-order rate constant of (6.6±0.5)×10⁷ M⁻¹ s⁻¹ at pH 7.4; formation of iron(III)cytochrome c is quantitative. Based on these rate constants, we propose that the reaction with iron(II)cytochrome c proceeds via a mechanism in which 90% of NO₂ oxidizes the iron center directly—most probably via reaction at the solvent-accessible heme edge—whereas 10% oxidizes the amino acid residues to the corresponding radicals, which, in turn, oxidize iron(II). Iron(II)cytochrome c is also oxidized by peroxynitrite in the presence of CO₂ to iron(III)cytochrome c, with a yield of ~60% relative to peroxynitrite. Our results indicate that, in vivo, NO₂ will attack preferentially the reduced form of cytochrome c; protein damage is expected to be marginal, the consequence of formation of amino acid radicals on iron(III)cytochrome c.     

Response surface methodology: Synthesis of short chain fructooligosaccharides with a fructosyltransferase from Aspergillus aculeatus

A transferase was isolated, purified and characterised from Aspergillus aculeatus. The enzyme exhibited a pH and temperature optima of 6.0 and 60 °C, respectively and under such conditions remained stable with no decrease in activity after 5 h. The enzyme was purified 7.1 fold with a yield of 22.3% and specific activity of 486.1 U mg^?1 after dialysis, concentration with polyethyleneglycol (30%) and DEAE-Sephacel chromatography. It was monomeric with a molecular mass of 85 kDa and K_m and V_max values of 272.3 mM and 166.7 μmol min^?1 ml^?1. The influence of pH, temperature, reaction time, and enzyme and sucrose concentration on the formation of short-chain fructooligosaccharides (FOS) was examined by statistical response surface methodology (RSM). The enzyme showed both transfructosylation and hydrolytic activity with the transfructosylation ratio increasing to 88% at a sucrose concentration of 600 mg ml^?1. Sucrose concentration (400 mg ml^?1) temperature (60 °C), and pH (5.6) favoured the synthesis of high levels of GF₃ and GF₄. Incubation time had a critical effect on the yield of FOS as the major products were GF₂ after 4 h and GF₄ after 8 h. A prolonged incubation of 16 h resulted in the conversion of GF₄ into GF₂ as a result of self hydrolase activity.     

Copper,zinc superoxide dismutase of Curcuma aromatica is a kinetically stable protein

This study details on cloning and characterization of Cu,Zn superoxide dismutase (Ca–Cu,Zn SOD) from a medicinally important plant species Curcuma aromatica. Ca–Cu,Zn SOD was 692 bp with an open reading frame of 459 bp. Expression of the gene in Escherichia coli cells followed by purification yielded the enzyme with K_m of 0.047 ± 0.008 μM and V_max of 1250 ± 24 units/mg of protein. The enzyme functioned (i) across a temperature range of −10 to +80 °C with temperature optima at 20 °C; and (ii) at pH range of 6–9 with optimum activity at pH 7.8. Ca–Cu,Zn SOD retained 50% of the maximum activity after autoclaving, and was stable at a wide storage pH ranging from 3 to 10. The enzyme tolerated varying concentrations of denaturating agent, reductants, inhibitors, trypsin, was fairly resistant to inactivation at 80 °C for 180 min (k_d, 6.54 ± 0.17 × 10⁻³ min⁻¹; t_1/2, 106.07 ± 2.68 min), and had midpoint of thermal transition (T_m) of 70.45 °C. The results suggested Ca–Cu,Zn SOD to be a kinetically stable protein that could be used for various industrial applications.     

Immobilization of Candida rugosa lipase on electrospun cellulose nanofiber membrane

A biocatalyst with high activity retention of lipase was fabricated by the covalent immobilization of Candida rugosa lipase on a cellulose nanofiber membrane. This nanofiber membrane was composed of nonwoven fibers with 200 nm nominal fiber diameter. It was prepared by electrospinning of cellulose acetate (CA) and then modified with alkaline hydrolysis to convert the nanofiber surface into regenerated cellulose (RC). The nanofiber membrane was further oxidized by NaIO₄. Aldehyde groups were simultaneously generated on the nanofiber surface for coupling with lipase. Response surface methodology (RSM) was applied to model and optimize the modification conditions, namely NaIO₄ content (2–10 mg/mL), reaction time (2–10 h), reaction temperature (25–35 °C) and reaction pH (5.5–6.5). Well-correlating models were established for the residual activity of the immobilized enzyme (R² = 0.9228 and 0.8950). We found an enzymatic activity of 29.6 U/g of the biocatalyst was obtained with optimum operational conditions. The immobilized lipase exhibited significantly higher thermal stability and durability than equivalent free enzyme.     

Purification and characterization of an extremely dimethylsulfoxide tolerant esterase from a salt-tolerant Bacillus species isolated from the marine environment of the Sundarbans

A Bacillus sp. isolated from the Sundarbans region of the Bay of Bengal (NCBI GenBank Accession no. AY723697) which can tolerate 10% (w/v) NaCl, produces esterase optimally in Marine Broth 2216 medium containing 1% (w/v) NaCl. The enzyme was purified 42.7-fold with 6.4% recovery, (specific activity 569.2 U/mg protein) by ammonium sulphate precipitation followed by anion and cation exchange chromatography. The serine type esterolytic enzyme has a molecular weight of 35.0 kDa and is denatured into polypeptides of molecular weights 20 kDa and 15 kDa. The esterase was most active at pH 8.0, the pH of the seawater at the site of collection and is stable in the pH range 6.0–9.0. The optimum temperature of activity of this esterase is 45 °C and the enzyme is very stable after 1 h pre-incubation at 50 °C. Our esterase shows about 100% activity when incubated with 1 M NaCl, the activity drops to about 50% when incubated with 2.5 M sodium chloride and the enzyme is completely inactivated when 4 M NaCl is present during reaction. The esterase is almost inactivated by Ca²⁺, Hg²⁺ and Fe³⁺ ions, reducing agents and detergent. Interestingly, Co²⁺, a known inhibitor of many enzymes, preserved 70% of the activity of this esterase. Specific activity of the esterase increases more than twofold in the presence of water-miscible organic solvents as compared to that in aqueous buffer. When incubated for a period of 10 days in the presence of 30–70% dimethylsufoxide (DMSO), the specific activity increased by approximately two–threefold compared to the enzyme in aqueous buffer throughout the period of study. Specific activity between 1283 and 525 U/mg was maintained by our enzyme when incubated with 50% DMSO for 10 days. The enzyme was most active on p-nitrophenyl acetate, ethyl acetate, alpha isomer of naphthyl acetate but shows relatively lesser activity towards triglycerides of fatty acids. Certain characteristics, such as molecular weight, effects of NaCl, metal ions (Zn²⁺ and Mg²⁺) and reactivity towards para-nitrophenyl and aliphatic esters were strikingly similar to already described marine bacterial derived esterases. Extreme stability in DMSO could make this enzyme a potential immobilized biocatalyst for application in non-aqueous based continuous bioprocesses. Higher specific activity and purification factor, better thermo tolerance and solvent stability would make our enzyme more attractive for biotechnological applications than the marine microbial derived esterases described so far.     

Optimization of process parameters of the Pholiota squarrosa extracellular polysaccharide by Box–Behnken statistical design

The quantitative effects of fermentation temperature, fermentation time and inoculum volume on the yield of Pholiota squarrosa extracellular polysaccharide were investigated using response surface methodology (RSM). The experimental data obtained were fitted to a second-order polynomial equation using multiple regression analysis and also analyzed by appropriate statistical methods. RSM analysis showed good correspondence between experimental and predicted values. It was found that three parameters represented significant effect. The coefficient of determination (R²) for the model was 98.5%. Probability value (P < .0001) demonstrated a very high significance for the regression model. By solving the regression equation and also by analyzing the response surface contour plots, the optimal process parameters were determined: fermentation temperature 28.57 °C, fermentation time 7.82 d and inoculum volume 12.57 ml. Under the optimal conditions the corresponding response value predicted for extracellular polysaccharide production was 853.73 μg per milliliter of fermentation liquor, which was confirmed by validation experiments.     

Statistical optimization of l-leucine amino peptidase production from Streptomyces gedanensis IFO 13427 under submerged fermentation using response surface methodology

Response surface methodology (RSM) employing the central composite design (CCD) was used to optimize the fermentation medium for the production of l-leucine amino peptidase (LAP) from Streptomyces gedanensis IFO13427 under submerged fermentation. The design was employed by selecting substrate concentration, NaCl concentration and initial pH as model factors by ‘one variable at a time’ experiment. A second-order quadratic model and response surface method showed that the optimum conditions (soy bean 0.3%, NaCl, 0.03 M, and initial pH 7) resulted in the improvement of LAP production (25.69 IU/ml) as compared to the initial level (12.17 ± 0.23 IU/ml) after 72 h of fermentation, whereas its value predicted by the quadratic model was 24.56 IU/ml. Analysis of variance (ANOVA) showed a high coefficient of determination (R²) value of 0.9799, ensuring a satisfactory adjustment of the quadratic model with the experimental data. This is first report on LAP production by S. gedanensis using statistical experimental design and response surface methodology in submerged fermentation.     

A novel medium for the production of cephamycin C by Nocardia lactamdurans using solid-state fermentation

In this study, Nocardia lactamdurans NRRL 3802 was explored for the first time for production of cephamycin C by using solid-state fermentation. The effects of various substrates, moisture content, inoculum size, initial pH of culture medium, additional nitrogen source and amino acids were investigated for the maximum production of cephamycin C by N. lactamdurans NRRL 3802 in solid-state fermentation. Subsequently, selected fermentation parameters were further optimized by response surface methodology (RSM). The soybean flour as a substrate with moisture content of 65%, initial pH of culture medium of 6.5 and inoculum size of 10⁹ CFU/ml (2 × 10⁸ CFU/gds) at 28 ± 2 °C after 4 days gave maximum production of 15.75 ± 0.27 mg/gds of cephamycin C as compared to 8.37 ± 0.23 mg/gds before optimization. Effect of 1,3-diaminopropane on cephamycin C production was further studied, which further increased the yield to 27.64 ± 0.33 mg/gds.     

Inulinase overproduction by a mutant of the marine yeast Pichia guilliermondii using surface response methodology and inulin hydrolysis

In this study, in order to isolate inulinase overproducers from the marine yeast Pichia guilliermondii, its cells were treated by using UV light and LiCl. The mutant M-30 with enhanced inulinase production was obtained and was found to be stable after cultivation for 20 generations. Response surface methodology (RSM) was used to optimize the medium compositions and cultivation conditions for inulinase production by the mutant M-30 in liquid fermentation. Inulin, yeast extract, NaCl, temperature, pH for maximum inulinase production by the mutant M-30 were found to be 20.0 g/l, 5.0 g/l, 20.0 g/l, 28 °C and 6.5, respectively. Under the optimized conditions, 127.7 U/ml of inulinase activity was reached in the liquid culture of the mutant M-30 whereas the predicted maximum inulinase activity of 129.8 U/ml was derived from RSM regression. Under the same conditions, its parent strain only produced 48.1 U/ml of inulinase activity. This is the highest inulinase activity produced by the yeast strains reported so far. We also found that inulin could be actively converted into monosaccharides by the crude inulinase.     

A putative proline iminopeptidase of Thermotoga maritima is a leucine aminopeptidese with lysine-p-nitroanilide hydrolyzing activity

A putative aminopeptidase P gene (TM0042, Swissport Q9WXP9, GeneBank AAD35136) of Thermotoga maritima was cloned and expressed in Escherichia coli BL21 (RIL). The enzyme was purified by the combination of ion exchange chromatography; Q-Sepharose and Mono-Q column. The purified recombinant T. maritima aminopeptidase P enzyme, gave a homogenous protein band with an apparent molecular weight of 40 kDa in SDS-PAGE analysis. The enzyme was purified 23-fold with the specific activity of 16.5 unit/mg with the final recovery of 22%. The enzyme was thermostable up to 90 °C for 30 min. An optimal activity was observed at 90 °C at pH 7.5. The purified enzyme was stable between pH 6.5 and 8 at 80 °C with the optimum of pH 7.5. Based on the amino acid sequence, the enzyme belongs to M 24B family of metalloenzymes. None of the divalent cations enhance the activity of the enzyme while Pb²⁺, Cu²⁺, Co²⁺, Cd²⁺, and Zn²⁺ were inhibitory to the enzyme activity. Divalent cation of Mg²⁺ showed 100% enzyme activity, to a lesser extent, Ca²⁺ and Mn²⁺ whereas strong inhibition of enzyme activity was observed with Zn²⁺ and Cd²⁺. The enzyme designated as putative aminopeptidase P was very low activity in hydrolyzing proline-p-nitroanilide. Kinetic studies on the purified enzyme confirmed that the enzyme is a leucine aminopeptidase. Enzyme also hydrolyzes lysine-p-nitroanilide with efficiency comparable to that of leucine-p-nitroanilide. This is the first report of leucine aminopeptidase with lysine-p-nitroanilide hydrolyzing activity, which belongs to the M 24B family of metalloenzymes.     

Shrinking factors of hyperbranched polysaccharide from fungus

The branched structure properties of hyperbranched polysaccharides (TM3a and TM3b), extracted from sclerotia of Pleurotus tuber-regium, were studied by using laser light scattering and viscometry. The configurational shrinking factor (g) and viscometric shrinking factor (g′) of TM3a and TM3b were discussed, where curdlan and pullulan were taken as the linear references for derivation of g and g′. The dependences of g factor, g′ factor, and Flory factor (Φ_branched) on weight average molecular weight (M_w) were established to be g = 1.07 × 10²$M_{\text{w}}^{-0.48\pm 0.09}$, g′ = 3.63 × 10¹$M_{\text{w}}^{-0.43\pm 0.01}$, and Φ_branched = 7.08 × 10²⁰$M_{\text{w}}^{0.39\pm 0.1}$ for TM3a in 0.25 M LiCl/DMSO at 25 °C, when curdlan acted as the linear reference. A power law relationship g′ = 2.71 × 10^?1g^?0.61±0.1 for TM3a was found, and the exponent was approximately same to 0.60 established by Kurata et al. for polystyrene star molecules. The dependence of g factor on M_w for TM3b was found to be g = 1.99 × 10²$M_{\text{w}}^{-0.53\pm 0.02}$, when pullulan was used as the linear reference. On the basis of Zimm–Stockmayer equation for tetrafunctional units, molecular weight of branching unit (M₀) deduced from nonlinear curve fitting of g versus M_w was 8739 ± 564 g/mol and 3961 ± 1245 g/mol for TM3a and TM3b, respectively. The effect of different linear reference curves and polydispersity was discussed. This work gave valuable information on branched structure characterization and insights into the biosynthetic pathways of the hyperbranched polysaccharide from fungus.