Production of a new exopolysaccharide (EPS) by Pseudomonas oleovorans NRRL B-14682 grown on glycerol

Pure glycerol and glycerol-rich product (GRP) obtained from the biodiesel industries were used as carbon source for the production of a new extracellular polysaccharide (EPS) by Pseudomonas oleovorans NRRL B-14682. The influence of temperature (20–40 °C) and pH (6.0–8.0) was studied. A temperature of 30 °C and pH control at 6.8 gave the maximum cell growth and EPS production. The culture attained a maximum cell dry weight (CDW) of 9.55 g l⁻¹ and an EPS concentration of 11.82 g l⁻¹ when cultivated with pure glycerol. GRP was a suitable carbon source, as shown by the slightly higher EPS concentration (12.18 g l⁻¹). The EPS productivity obtained with GRP (3.85 g l⁻¹ d⁻¹) was almost twice that obtained with pure glycerol (2.00 g l⁻¹ d⁻¹). Also, the yield on glycerol was higher for the cultivation with GRP (0.36 g g⁻¹) than for pure glycerol (0.28 g g⁻¹). The EPS was a high molecular weight heteropolysaccharide, composed by neutral sugars (37–80 wt% galactose, 2–30 wt% glucose, 0.5–25 wt% mannose and 0.5–20 wt% rhamnose) and containing acyl group substituents (pyruvil, acetyl and succinyl were identified). The EPS forms highly viscous aqueous dispersions with many potential commercial applications.     

Enzymatic hydrolysis of corncob and ethanol production from cellulosic hydrolysate

 Enzymatic hydrolysis of corncob and ethanol fermentation from cellulosic hydrolysate were investigated. After corncob was pretreated by 1% H₂SO₄ at 108 °C for 3 h, the cellulosic residue was hydrolyzed by cellulase from Trichoderma reesei ZU-02 and the hydrolysis yield was 67.5%. Poor cellobiase activity in T. reesei cellulase restricted the conversion of cellobiose to glucose, and the accumulation of cellobiose caused severe feedback inhibition to the activities of β-1,4-endoglucanase and β-1,4-exoglucanase in cellulase system. Supplementing cellobiase from Aspergillus niger ZU-07 greatly reduced the inhibitory effect caused by cellobiose, and the hydrolysis yield was improved to 83.9% with enhanced cellobiase activity of 6.5 CBU g⁻¹ substrate. Fed-batch hydrolysis process was started with a batch hydrolysis containing 100 g l⁻¹ substrate, with cellulosic residue added at 6 and 12 h twice to get a final substrate concentration of 200 g l⁻¹. After 60 h of reaction, the reducing sugar concentration reached 116.3 g l⁻¹ with a hydrolysis yield of 79.5%. Further fermentation of cellulosic hydrolysate containing 95.3 g l⁻¹ glucose was performed using Saccharomyces cerevisiae 316, and 45.7 g l⁻¹ ethanol was obtained within 18 h. The research results are meaningful in fuel ethanol production from agricultural residue instead of grain starch.     

Enhancement of polysaccharide production in suspension cultures of protocorm-like bodies from Dendrobium huoshanense by optimization of medium compositions and feeding of sucrose

A strategy that optimization of medium compositions for maximum biomass followed by feeding of sucrose for maximum polysaccharide synthesis was developed for enhancing polysaccharide production in suspension culture of protocorm-like bodies (PLBs) of Dendrobium huoshanense C.Z. Tang et S.J. Cheng. In growth stage, the original half-strength MS medium was optimized with carbon sources, nitrogen sources and metal ion combinations. The effects of different carbon sources on PLBs growth were remarkable and sucrose at 35 g l⁻¹ was the most suitable. Sole nitrate nitrogen of 30 mmol l⁻¹ was the best for PLBs growth. Metal ions (Ca²⁺, Fe²⁺, Mn²⁺ and Zn²⁺) showed different influences on PLBs growth. The optimal concentration of Ca²⁺, Fe²⁺, Mn²⁺ and Zn²⁺ was 4.5 mmol l⁻¹, 0.1 mmol l⁻¹, 0.5 mmol l⁻¹ and 0.06 mmol l⁻¹, respectively. In the optimized medium (sucrose, nitrate, Ca²⁺, Fe²⁺, Mn²⁺ and Zn²⁺ concentration as described above, the other component concentration seen in half-strength MS), 33.9 g DW l⁻¹ PLBs were harvested after 30 days of culture and biomass increase was improved 245% as compared with that in the original medium. In production stage, polysaccharide synthesis was significantly improved by the feeding sucrose. The maximum polysaccharide production (22 g l⁻¹) was obtained in the case of 50 g l⁻¹ sucrose feeding at day 30 of culture, which was about 109-fold higher than that in the original medium without feeding of sucrose.     

Evaluation of distant carbon sources in biosurfactant production by a gamma ray-induced Pseudomonas putida mutant

Pseudomonas putida 33 wild strain, subjected to gamma ray mutagenesis and designated as P. putida 300-B mutant was used as microbial rhamnolipid-producer by using distant carbon sources (viz. hydrocarbons, waste frying oils ‘WFOs’, vegetable oil refinery wastes and molasses) in the minimal media under shake flask conditions. The behavior of glucose as co-substrate and growth initiator was examined. The 300-B mutant strain showed its ability to grow on all the substrates tested and produced rhamnolipid surfactants to different extents however; soybean and corn WFOs were observed to be preferred carbon sources followed by kerosene and paraffin oils, respectively. The best cell biomass (3.5 g l⁻¹) and rhamnolipids yield (4.1 g l⁻¹) were obtained with soybean WFO as carbon source and glucose as growth initiator under fed-batch cultivation showing an optimum specific growth rate (μ) of 0.272 h⁻¹, specific product yield (q_p) of 0.318 g g⁻¹ h and volumetric productivity (P_V) of 0.024 g l⁻¹ h. The critical micelle concentration of its culture supernatant was observed to be 91 mg rhamnolipids l⁻¹ and surface tension as 31.2 mN m⁻¹.     

Kinetic analysis of photosynthetic growth and photohydrogen production of two strains of Rhodobacter Capsulatus

Two mutants of Rhodobacter Capsulatus (JP91 and IR3), a photosynthetic purple non-sulfur bacterium, were grown in a batch photobioreactor under illumination with 30 mmol l⁻¹ dl-lactate and 5 mmol l⁻¹ l-glutamate as carbon and nitrogen source, respectively. Bacterial growth was measured by monitoring the increase in absorbance at 660 nm. The photosynthetic growth processes under different cultivated temperatures are well fitted by a specific logistic model to analyze the kinetics of photosynthetic growth of two strains, thus the apparent growth rates (k) of these photosynthetic bacteria, the variations of cell dry weight (CDW) as well as their relationship with temperature are obtained. In present work, k is (0.1465 ± 0.0146), (0.2266 ± 0.0207) and (0.3963 ± 0.0257) h⁻¹ for JP91 and (0.1117 ± 0.0122), (0.1218 ± 0.0133) and (0.2223 ± 0.0152) h⁻¹ for IR3 at 26, 30 and 34 °C, respectively. And the difference between CDW_max and CDW₀ is (0.8997 ± 0.0097), (0.8585 ± 0.0093) and (0.9241 ± 0.0099) g l⁻¹ for JP91 and (0.8167 ± 0.0089), (0.7878 ± 0.0086) and (0.8358 ± 0.0091) g l⁻¹ for IR3 at 26, 30 and 34 °C, respectively. Also real-time monitoring of hydrogen production rates is acquired by recording the flow rates of photohydrogen for these two strains under different temperatures. The effects of temperature on the bacteria growth, hydrogen production capability and substrate conversion efficiency are discussed based on these results. The most preferment temperature, 30 °C, showed good substrate conversion efficiency of 52.7 and 68.2% for JP91 and IR3, respectively.     

Characterization and overproduction of a thermo-alkaline pectate lyase from alkaliphilic Bacillus licheniformis with potential in ramie degumming

A thermo-alkaline pectate lyase (BliPelA) gene from an alkaliphilic Bacillus licheniformis strain was cloned and overexpressed in Escherichia coli. Mature BliPelA exhibited maximum activity at pH 11 and 70 °C, and demonstrated cleavage capability on a broad range of substrates such as polygalacturonic acid, pectins, and methylated pectins. The highest specific activity, of 320 U mg⁻¹, was towards polygalacturonic acid. Significant ramie (Boehmeria nivea) fiber weight loss (21.5%) was obtained following enzyme treatment and combined enzyme-chemical treatment (29.3%), indicating a high ramie degumming efficiency of BliPelA. The total activity of recombinant BliPelA reached 1450.1 U ml⁻¹ with a productivity of 48.3 U ml⁻¹ h⁻¹ under high-cell-density cultivation with a glycerol exponential feeding strategy for 30 h in 1-l fed-batch fermenter, and 1380.1 U ml⁻¹ with a productivity of 57.5 U ml⁻¹ h⁻¹ after 24 h under constant glucose feeding in a 20-l fermenter using E. coli as the host. The enzyme yields reached 4.5 and 4.3 g l⁻¹ in 1-l and 20-l fed-batch fermenters, respectively, which are higher than those of most reported alkaline Pels. Based on these promising properties and high-level production, BliPelA shows great potential for application in ramie degumming in textile industry.     

Volatile fatty acids accumulation and rhamnolipid generation in situ from waste activated sludge fermentation stimulated by external rhamnolipid addition

The solubilization and acidification of waste activated sludge (WAS) were apparently enhanced by external rhamnolipid (RL) addition. The maximum solute carbohydrate concentrations increased linearly from 48 ± 5 mg COD L⁻¹ in the un-pretreated WAS (blank) to 566 ± 19 mg COD L⁻¹, and protein increased from 1050 ± 8 to 3493 ± 16 mg COD L⁻¹ at RL dosage of 0.10 g g⁻¹ TSS. The highest VFAs concentration peaked at 3840 mg COD L⁻¹ at RL dosage of 0.04 g g⁻¹ TSS, which was 4.24-fold higher than the blank test. RL was generated in situ during WAS fermentation when external RL was added. It was detected that RL concentration was increased from initial 880 ± 92 mg L⁻¹ to 1312 ± 7 mg L⁻¹ at the end of 96 h with RL dosage of 0.04 g g⁻¹ TSS, which was increased to 1.49-fold. Meanwhile, methane production was notably reduced to a quite low level of 2.0 mL CH₄ g⁻¹ VSS, showing effective inhibition of methanogens by RL (58.8 mL CH₄ g⁻¹ VSS in the blank). In addition, the activity of hydrolytic enzymes (protease and α-glucosidase) was enhanced accordingly. VFAs accumulation and RL generation in situ demonstrated that the additional RL substantially performed enhanced biological effects for waste activated sludge fermentation.     

Effects of feed sugar concentration on continuous ethanol fermentation of cheese whey powder solution (CWP)

Cheese whey powder (CWP) solution with different CWP or sugar concentrations was fermented to ethanol in a continuous fermenter using pure culture of Kluyveromyces marxianus (DSMZ 7239). Sugar concentration of the feed CWP solution varied between 55 and 200 g l⁻¹ while the hydraulic residence time (HRT) was kept constant at 54 h. Ethanol formation, sugar utilization and biomass formation were investigated as functions of the feed sugar concentration. Percent sugar utilization and biomass concentrations decreased and the effluent sugar concentration increased with increasing feed sugar concentrations especially for the feed sugar contents above 100 g l⁻¹. Ethanol concentration and productivity (DP) increased with increasing feed sugar up to 100 g l⁻¹ and then decreased with further increases in the feed sugar content. The highest ethanol concentration (3.7%, v v⁻¹) and productivity (0.54 gE l⁻¹ h⁻¹) were obtained with the feed sugar content of 100 g l⁻¹ or 125 g l⁻¹. The ethanol yield coefficient (Y_P/S) was also maximum (0.49 gE gS⁻¹) when the feed sugar was between 100 and 125 g l⁻¹. The growth yield coefficient (Y_X/S) decreased steadily from 0.123 to 0.063 gX gS⁻¹ when the feed sugar increased from 55 to 200 g l⁻¹ due to adverse effects of high sugar contents on yeast growth. The optimal feed sugar concentration maximizing the ethanol productivity and sugar utilization was between 100 and 125 g l⁻¹ under the specified experimental conditions.     

Emulsifying properties of a marine bacterial exopolysaccharide

Exopolysaccharide produced by a marine Enterobacter cloaceae (designated as EPS 71a) emulsified hexane, benzene, xylene, kerosene, paraffin oil, cottonseed oil, coconut oil, jojoba oil, castor oil, groundnut oil and sunflower oil. However, it could form stable emulsions with groundnut oil and hexane at optimal concentration of 1 mg ml⁻¹. Further increase in concentration of EPS 71a did not show noteworthy increase in emulsification indices. Emulsions with groundnut oil and hexane were stable up to 10 days between pH 2 and 10 and in the presence of sodium chloride in the range of 5–50 mg ml⁻¹ at 35–37 °C. EPS 71a formed stable emulsion with xylene as compared to commercial gums such as arabic, tragacanth, karaya and xanthan.     

Effect of inoculum and pepsin–pancreatin hydrolysis on fibre fermentation measured by the gas production technique in pigs

Two experiments were undertaken to adapt the in vitro gas production technique in syringes, used for ruminants, to fibre fermentation studies in the large intestine of pigs.In a first experiment, two inocula (faeces and large intestine content) were compared at four dilution levels in a buffer solution (0.025, 0.05, 0.1 and 0.2 g ml⁻¹) with two substrates: wheat bran and sugar–beet pulp. The accumulated gas produced over 72 h was modelled and the kinetics parameters compared. The time to half asymptote was lower for the intestinal inoculum (5.5 versus 8.0 h, P<0.02), but the 2 inocula yielded similar fractional rates of degradation (0.16 h⁻¹) and gave equal final gas production (252 ml g⁻¹ substrate). No interaction (P>0.05) was observed between inocula and substrates. The dilution of the samples in the buffer solution increased (P<0.001) the lag time (from 0.9 to 2.1 h for dilution rates ranging from 0.2 to 0.025 g ml⁻¹, respectively) and decreased (P<0.001) the rates of substrate degradation (from 0.18 to 0.13 h⁻¹).A second experiment aimed to study the effect of an in vitro pepsin–pancreatin hydrolysis of the sample prior to the gas test. Six substrates were tested: maize, wheat bran, sugar–beet pulp, lupins, peas and soybean meal. The enzymatic hydrolysis affected (P<0.001) the kinetics parameters and the ranking order of the fermented substrates. The lag times also increased for all ingredients. The rate of degradation decreased when peas, lupins, maize and wheat bran were hydrolysed (P<0.001) but it increased with soybean meal (P=0.014) and sugar–beet pulp (P<0.001). Final gas production increased with peas and soybean meal (P<0.001), remained unchanged for lupins and decreased for the other substrates (P<0.001).In conclusion, the method using faeces as a source of microbial inoculum is reliable to characterise the fermentation kinetics of ingredients in the large intestine of pigs. However, it is important to hydrolyse the substrates with pepsin and pancreatin before the gas tests.     

Comparison of two matrices for selective recovery of C595 diabody fragment (dbFv) from Escherichia coli lysates

A comparative study of the performance of two types of adsorbent (Streamline Quartz Base and Upfront Matrices), derivatized with the same affinity ligand (RPAP) to recover C595 diabody fragment (dbFv) from Escherichia coli lysates has been undertaken. Both streamline and Upfront Matrices are characterized by a particle size range of 100–300 μm. Streamline has a density of 1.20 g cm⁻³ and ligand concentration of 0.85 μmol ml⁻¹. Upfront has a density of 1.35 g cm⁻³ and ligand concentration of 0.83 μmol ml⁻¹. The release of C595 dbFv from E. coli cells was achieved by a chemical lysis method. The recovery performance of both adsorbents was evaluated in terms of operational productivity and elution yield of C595 dbFv in packed bed (clarified feedstock) and expanded bed (unclarified and clarified feedstock) chromatography systems. Streamline and Upfront adsorbents exhibited diabody operational productivities of 131 and 202 mg l⁻¹, respectively, with an elution yield of 92 and 94%, respectively, in packed bed operation. Streamline and Upfront adsorbents exhibited diabody operational productivities of 54.5 and 123.7 mg l⁻¹, respectively, with an elution yield of 89 and 92%, respectively, in expanded bed operation.     

Chemical compositions and characteristics of organic compounds in propolis from Yemen

Propolis is a gummy material made by honeybees for protecting their hives from bacteria and fungi. The main objective of this study is to determine the chemical compositions and concentrations of organic compounds in the extractable organic matter (EOM) of propolis samples collected from four different regions in Yemen. The propolis samples were extracted with a mixture of dichloromethane and methanol and analyzed by gas chromatography–mass spectrometry (GC–MS). The results showed that the total extract yields ranged from 34% to 67% (mean = 55.5 ± 12.4%). The major compounds were triterpenoids (254 ± 188 mg g⁻¹, mainly α-, β-amyryl and dammaradienyl acetates), n-alkenes (145 ± 89 mg g⁻¹), n-alkanes (65 ± 29 mg g⁻¹), n-alkanoic acids (40 ± 26 mg g⁻¹), long chain wax esters (38 ± 25 mg g⁻¹), n-alkanols (8 ± 3 mg g⁻¹) and methyl n-alkanoates (6 ± 4 mg g⁻¹). The variation in the propolis chemical compositions is apparently related to the different plant sources. The compounds of these propolis samples indicate that they are potential sources of natural bio-active compounds for biological and pharmacological applications.     

Optimization of biomass production with enhanced glucan and dietary fibres content by Pleurotus ostreatus ATHUM 4438 under submerged culture

This work was aimed at optimizing biomass production by the edible basidiomycete Pleurotus ostreatus ATHUM 4438 in a submerged process with enhanced glucan and dietary fibres content. β-Glucan from Pleurotus sp. (pleuran) has been used as food supplements due to its immunosuppressive activity. Like other dietary fibre components, oyster mushroom polysaccharides can stimulate the growth of colon microorganisms (probiotics), i.e. act as prebiotics. We used the FF MicroPlate for substrate utilization and growth monitoring. The pattern of substrate catabolism forms a substrate assimilation fingerprint which is useful in selecting media components for media optimization of maximum biomass production. Different carbon sources (95) were used and then 8 of them were tested in shake flask cultures. The effect of various organic and complex nitrogen sources on biomass production was also examined and response surface methodology based on central composite design was applied to explore the optimal medium composition. When the optimized culture medium was tested in a 20-L stirred tank bioreactor, using 57 g L⁻¹ xylose and 37 g L⁻¹ corn steep liquor, high yields (39.2 g L⁻¹) of dry biomass was obtained. The yield coefficients for total glucan and dietary fibres on mycelial biomass formed were 140 ± 4 and 625 ± 9 mg g⁻¹ mycelium dry weight, respectively.     

Protocorm culture of Dendrobium candidum in balloon type bubble bioreactors

Protocorm cultures of Dendrobium candidum were established in balloon type bubble bioreactors using Murashige and Skoog (MS) medium with 0.5 mg l⁻¹ α-naphthaleneacetic acid (NAA), 2.5% (w/v) sucrose, 5:25 mM NH₄:NO₃ and 1% (v/v) banana homogenate for the production of biomass and bioactive compounds. In 3 l bioreactor containing 2 l medium, a maximum protocorm biomass (21.0 g l⁻¹ dry biomass) and also optimum quantities of total polysaccharides (389.3 mg g⁻¹ DW), coumarins (18.0 mg g⁻¹ DW), polyphenolics (11.9 mg g⁻¹ DW), and flavonoids (4.5 mg g⁻¹ DW) were achieved after 7 weeks of culture. Based on these studies, 5 and 10 l bioreactor cultures were established to harvest 80 g and 160 g dry biomass. In 10 l bioreactors, the protocorms grown were accumulated with optimal levels of polysaccharides (424.1 mg g⁻¹ DW), coumarins (15.8 mg g⁻¹ DW), polyphenols (9.03 mg g⁻¹ DW) and flavonoids (4.7 mg g⁻¹ DW). The bioreactor technology developed here will be useful for the production of important bioactive compounds from D. candidum.     

Batch and continuous fermentative production of hydrogen with anaerobic sludge entrapped in a composite polymeric matrix

Cell immobilization techniques were adopted to biohydrogen production using immobilized anaerobic sludge as the seed culture. Sucrose-based synthetic wastewater was converted to H₂ using batch and continuous cultures. A novel composite polymeric material comprising polymethyl methacrylate (PMMA), collagen, and activated carbon was used to entrap biomass for H₂ production. Using the PMMA immobilized cells, the favorable conditions for batch H₂ fermentation were 35 °C, pH 6.0, and an 20 g COD l⁻¹ of sucrose, giving a H₂ production rate of 238 ml h⁻¹ l⁻¹ and a H₂ yield of 2.25 mol H₂ mol sucrose⁻¹. Under these optimal conditions, continuous H₂ fermentation was conducted at a hydraulic retention time (HRT) of 4–8 h, giving the best H₂-producing rate of 1.8 l h⁻¹ l⁻¹ (over seven-fold of the best batch result) at a HRT of 6 h and a H₂ yield of 2.0 mol H₂ mol sucrose⁻¹. The sucrose conversion was essentially over 90% in all runs. The biogas consisted of only H₂ and CO₂. The major soluble metabolites were butyric acid, acetic acid, and 2,3-butandiol, while a small amount of ethanol also detected. The PMMA-immobilized-cell system developed in this work seems to be a promising H₂-producing process due to the high stability in continuous operations and the capability of achieving a competitively high H₂ production rate under a relatively low organic loading rate.     

Treatment of dye-rich wastewater by an immobilized thermophilic cyanobacterial strain: Phormidium sp.

The removal of Remazol Blue and Reactive Black B by the immobilized thermophilic cyanobacterial strain Phormidium sp. was investigated under thermophilic conditions in a batch system, in order to determine the optimal conditions required for the highest dye removal. In the experiments, performed at pH 8.5, with different initial dye concentrations between 9.1 mg l⁻¹ and 82.1 mg l⁻¹ and at 45 °C, calcium alginate immobilized Phormidium sp. showed high dye decolorization, with maximum uptake yields ranging from 50% to 88% at all dye concentrations tested. When the effects of high dye concentrations on dye removal were investigated, the highest uptake yield in the beads was 50.3% for 82.1 mg l⁻¹ Remazol Blue and 60.0% for 79.5 mg l⁻¹ Reactive Black B. The highest color removal was detected at 45 °C and 50 °C incubation temperatures for all dye concentrations. As the temperature decreased, the removal yield of immobilized Phormidium sp. also decreased. At about 75 mg l⁻¹ initial dye concentrations, the highest specific dye uptake measured was 41.29–41.17 mg g⁻¹ for Remazol Blue and 47.69–43.82 mg g⁻¹ for Reactive Black B at 45 °C and 50 °C incubation temperatures, respectively, after 8 days incubation.     

Expression and purification of recombinant feline interferon in the baculovirus-insect larvae system

Feline interferons (FeIFNs) are cytokines with antiviral, antitumor and immunomodulatory functions used as therapeutic agents in a variety of veterinary diseases. In this work, FeIFN-α7 and FeIFN-α7xArg containing eight residues of arginine were expressed in Sf9 cells and insect larvae. At 4 days post-infection (dpi), the concentrations of FeIFN-α7 and FeIFN-α7xArg in suspension culture were (1.28 ± 0.15) × 10⁶ U ml⁻¹ and (1.3 ± 0.2) × 10⁶ U ml⁻¹ respectively. The maximum expression levels of FeIFN-α7 and FeIFN-α7xArg were (3.7 ± 0.2) × 10⁶ U ml⁻¹ and (3.5 ± 0.4) × 10⁶ U ml⁻¹ at 2 dpi in Rachiplusia nu larvae and (1.1 ± 0.2) × 10⁶ U ml⁻¹ and (1.0 ± 0.15) × 10⁶ U ml⁻¹ at 5 dpi in Spodoptera frugiperda larvae respectively. R. nu was a better host for FeIFN-α7 and FeIFN-α7xArg expression. The 8xArg tag did not affect the biological activity of FeIFN-α7 and was useful to promote the FeIFN-α7xArg adsorption on ion exchange chromatography (IEC), allowing its purification in a single step from supernatant culture and R. nu larvae. FeIFN-α7xArg was purified from the larval extract with a yield of 70% and a purification factor of 25 free of viruses. We conclude that R. nu larvae are new low-cost hosts for the expression of recombinant FeIFN-α7.     

Xylitol production from non-detoxified corncob hemicellulose acid hydrolysate by Candida tropicalis

The interest on use of lignocellulose for producing chemicals is increasing as these feedstocks are low cost, renewable and widespread sources of sugars. Corncob is an attractive raw material for xylitol production due to its high content of xylan. In this study, hemicellulose hydrolysate from corncobs without detoxification was used for xylitol production by Candida tropicalis CCTCC M2012462. Compared with prepared xylose medium, xylitol production with dilute acid hydrolysate medium does not seem to influence specific xylose reductase activity. The decrease in xylitol productivity with dilute acid hydrolysate medium is a result of a lower biomass concentration and lag-phase time. It appears that biomass growth rate is essential for xylitol production. In xylitol fermentation with a low initial inhibitors concentration and substrate feeding strategy, a maximal xylitol concentration of 38.8 g l⁻¹ was obtained after 84 h of fermentation, giving a yield of 0.7 g g⁻¹ xylose and a productivity of 0.46 g l⁻¹ h⁻¹.     

Pilot-scale production of 1,3-propanediol using Klebsiella pneumoniae

The conversion of glycerol to 1,3-propanediol (PDO) using Klebsiella pneumoniae M5al under anaerobic condition was scaled up from scale 5 to 5000 l in series. A simple strategy for scale-up was to transfer the optimized conditions of a lab scale bioreactor to pilot-scale fermentation. Multistage inocula were developed and their fermentation abilities were assessed in a small-scale fermenter. The experimental results showed that inoculum development in the early steps of a scale-up process could influence the outcomes of a large scale fermentation. Through three-stage liquid inoculum development and a pulse addition of (NH₄)₂SO₄ and yeast extract at 30 h of fermentation, the best results in a 5000 l fermentation were achieved leading to 58.8 g l⁻¹ 1,3-propanediol with a yield of 0.53 mol mol⁻¹ glycerol and productivity of 0.92 g l⁻¹ h⁻¹. This is the first report on pilot-scale 1,3-propanediol production using K. pneumoniae.