Biologically inspired strategy for programmed assembly of viral building blocks with controlled dimensions

Facile fabrication of building blocks with precisely controlled dimensions is imperative in the development of functional devices and materials. We demonstrate the assembly of nanoscale viral building blocks of controlled lengths using a biologically motivated strategy. To achieve this we exploit the simple self-assembly mechanism of Tobacco mosaic virus (TMV), whose length is solely governed by the length of its genomic mRNA. We synthesize viral mRNA of desired lengths using simple molecular biology techniques, and in vitro assemble the mRNA with viral coat proteins to yield viral building blocks of controlled lengths. The results indicate that the assembly of the viral building blocks is consistent and reproducible, and can be readily extended to assemble building blocks with genetically modified coat proteins (TMV1cys). Additionally, we confirm the potential utility of the TMV1cys viral building blocks with controlled dimensions via covalent and quantitative conjugation of fluorescent markers. We envision that our biologically inspired assembly strategy to design and construct viral building blocks of controlled dimensions could be employed to fabricate well-controlled nanoarchitectures and hybrid nanomaterials for a wide variety of applications including nanoelectronics and nanocatalysis.     

pH-responsive, DNA-directed reversible assembly of graphene oxide

Both graphene oxide (GO) and DNA can be used as building blocks for nano/micro devices or hybrid structures. Reversible assembly of these nanomaterials is highly desirable because of their promising applications in chemical sensors, energy storage, catalysis, and optoelectronic applications. However, reversible assembly of GO-DNA hybrid materials has not been achieved based on specific DNA hybridization and conformational transition. Here we report a general pH-responsive, DNA-directed assay for the design of a reversible assembly of GO-GO and GO-AuNPs hybrid using human telomeric G-quadruplex and i-motif DNA.     

Two-phase bioreactor system for cell-laden hydrogel assembly

Bottom-up approach is a potentially useful tool for hydrogel assembly of cell-laden individual building blocks. In this article, we assembled individual building blocks of photocrosslinkable microgels in a rapid and controlled manner. Individual building blocks of poly(ethylene glycol) (PEG) microgels with square and hexagonal shapes were fabricated by using a photolithography technique. Individual building blocks of PEG microgels were assembled on a hydrophobic mineral oil phase in a bioreactor with a magnetic stirrer. The hydrophobic mineral oil minimized the surface free energy to assemble hydrophilic PEG microgels on a two-phase oil-aqueous solution interface. We used the hydrophobic effect as a driving force for the hydrogel assembly. Various types of the hydrogel assembly were generated by controlling the stirring rate. As stirring speed increased, the percentage of linear, branched, and closely packed hydrogel assembly was increased. However, the percentage of random assembly was reduced by increasing stirring rate. The stirring time also played an important role in controlling the types of hydrogel assembly. The percentage of linear, branched, and closely packed hydrogel assembly was improved by increasing stirring time. Therefore, we performed directed cell-laden hydrogel assembly using a two-phase bioreactor system and optimized the stirring rate and time to regulate the desired types of hydrogel assembly. Furthermore, we analyzed cell viability of hydrogel linear assembly with square shapes, showing highly viable even after secondary photocrosslinking reaction. This bioreactor system-based hydrogel assembly could be a potentially powerful approach for creating tissue microarchitectures in a three-dimensional manner.     

Fabrication of novel biomaterials through molecular self-assembly

Two complementary strategies can be used in the fabrication of molecular biomaterials. In the 'top-down' approach, biomaterials are generated by stripping down a complex entity into its component parts (for example, paring a virus particle down to its capsid to form a viral cage). This contrasts with the 'bottom-up' approach, in which materials are assembled molecule by molecule (and in some cases even atom by atom) to produce novel supramolecular architectures. The latter approach is likely to become an integral part of nanomaterials manufacture and requires a deep understanding of individual molecular building blocks and their structures, assembly properties and dynamic behaviors. Two key elements in molecular fabrication are chemical complementarity and structural compatibility, both of which confer the weak and noncovalent interactions that bind building blocks together during self-assembly. Using natural processes as a guide, substantial advances have been achieved at the interface of nanomaterials and biology, including the fabrication of nanofiber materials for three-dimensional cell culture and tissue engineering, the assembly of peptide or protein nanotubes and helical ribbons, the creation of living microlenses, the synthesis of metal nanowires on DNA templates, the fabrication of peptide, protein and lipid scaffolds, the assembly of electronic materials by bacterial phage selection, and the use of radiofrequency to regulate molecular behaviors.     

Directed assembly of cell-laden hydrogels for engineering functional tissues

Tissue engineering aims to develop functionalized tissues for organ replacement or restoration. Biodegradable scaffolds have been used in tissue engineering to support cell growth and maintain mechanical and biological properties of tissue constructs. Ideally cells on these scaffolds adhere, proliferate, and deposit matrix at a rate that is consistent with scaffold degradation. However, the cellular rearrangement within these scaffolds often does not recapitulate the architecture of the native tissues. Directed assembly of tissue-like structures is an attractive alternative to scaffold-based approach for tissue engineering which potentially can build tissue constructs with biomimetic architecture and function. In directed assembly, shape-controlled microstructures are fabricated in which organized structures of different cell types can be used as tissue building blocks. To fabricate tissue building blocks, hydrogels are commonly used as biomaterials for cell encapsulation to mimic the matrix in vivo. The hydrogel-based tissue building blocks can be arranged in pre-defined architectures by various directed tissue assembly techniques. In this paper, recent advances in directed assembly-based tissue engineering are summarized as an emerging alternative to meet challenges associated with scaffold-based tissue engineering and future directions are addressed.     

Directed assembly of cell-laden hydrogels for engineering functional tissues

Tissue engineering aims to develop functionalized tissues for organ replacement or restoration. Biodegradable scaffolds have been used in tissue engineering to support cell growth and maintain mechanical and biological properties of tissue constructs. Ideally cells on these scaffolds adhere, proliferate, and deposit matrix at a rate that is consistent with scaffold degradation. However, the cellular rearrangement within these scaffolds often does not recapitulate the architecture of the native tissues. Directed assembly of tissue-like structures is an attractive alternative to scaffold-based approach for tissue engineering which potentially can build tissue constructs with biomimetic architecture and function. In directed assembly, shape-controlled microstructures are fabricated in which organized structures of different cell types can be used as tissue building blocks. To fabricate tissue building blocks, hydrogels are commonly used as biomaterials for cell encapsulation to mimic the matrix in vivo. The hydrogel-based tissue building blocks can be arranged in pre-defined architectures by various directed tissue assembly techniques. In this paper, recent advances in directed assembly-based tissue engineering are summarized as an emerging alternative to meet challenges associated with scaffold-based tissue engineering and future directions are addressed.     

Bifunctional DNA-gold nanoparticle conjugates as building blocks for the self-assembly of cross-linked particle layers

The DNA-directed self-assembly of surface-bound layers of gold nanoparticles offers a broad range of applications in biomedical analyses as well as in materials science. We here describe a new concept for the assembly of substrate-bound nanoparticle monolayers which employs bifunctional nanoparticles as building blocks, containing two independently addressable DNA oligomer sequences. One of the sequences was utilized for attaching the particle at the solid support, while the other sequence was used to establish cross-links between adjacently immobilized particles. AFM analyses proved the functionality of inter-particle cross-links leading to enhanced surface coverages and the formation of monolayered supramolecular aggregates attached to the substrate. We anticipate that further refinement of this approach will enable applications, for instance, the assembly of ordered layers useful as transducers in biosensing.     

The Rise of the Cartwheel: Seeding the Centriole Organelle

The cartwheel is a striking structure critical for building the centriole, a microtubule‐based organelle fundamental for organizing centrosomes, cilia, and flagella. Over the last 50 years, the cartwheel has been described in many systems using electron microscopy, but the molecular nature of its constituent building blocks and their assembly mechanisms have long remained mysterious. Here, we review discoveries that led to the current understanding of cartwheel structure, assembly, and function. We focus on the key role of SAS‐6 protein self‐organization, both for building the signature ring‐like structure with hub and spokes, as well as for their vertical stacking. The resemblance of assembly intermediates in vitro and in vivo leads us to propose a novel registration step in cartwheel biogenesis, whereby stacked SAS‐6‐containing rings are put in register through interactions with peripheral elements anchored to microtubules. We conclude by evoking some avenues for further uncovering cartwheel and centriole assembly mechanisms.     

Der „Sekundenkleber“ der Stummelfüßer

Novel insights into the “superglue” of velvet worms The biological “superglue” of velvet worms provides inspiration towards circular processing of advanced polymers. In nature, velvet worms employ a fluid, protein‐rich secretion for hunting and defense, which forms rapidly into stiff fibers. The fluid‐to‐fiber transition occurs outside the body without regulations, indicating that the “instructions” for assembly are programmed into the protein building blocks. Electrostatic interactions between oppositely charged protein domains and free ions drive protein folding, self‐organization (coacervation) and stabilization of the building blocks into nanoscale droplets. Yet, nanodroplets can be instantly transformed via simple mechanical stimulus as proteins partially unfold, merge together and form a strong network, which solidifies into a fiber. The mechanism is based on basic physico‐chemical principles. Thus, by extracting these principles, new methods of synthesizing sustainable polymer‐based materials can be developed.     

Structure by design: from single proteins and their building blocks to nanostructures

Nanotechnology realizes the advantages of naturally occurring biological macromolecules and their building-block nature for design. Frequently, assembly starts with the choice of a "good" molecule that is synthetically optimized towards the desired shape. By contrast, we propose starting with a pre-specified nanostructure shape, selecting candidate protein building blocks from a library and mapping them onto the shape and, finally, testing the stability of the construct. Such a shape-based, part-assembly strategy is conceptually similar to protein design through the combinatorial assembly of building blocks. If the conformational preferences of the building blocks are retained and their interactions are favorable, the nanostructure will be stable. The richness of the conformations, shapes and chemistries of the protein building blocks suggests a broad range of potential applications; at the same time, it also highlights their complexity. In this Opinion article, we focus on the first step: validating such a strategy against experimental data.     

Hierarchical protein folding pathways: a computational study of protein fragments

We have previously presented a building block folding model. The model postulates that protein folding is a hierarchical top-down process. The basic unit from which a fold is constructed, referred to as a hydrophobic folding unit, is the outcome of combinatorial assembly of a set of "building blocks." Results obtained by the computational cutting procedure yield fragments that are in agreement with those obtained experimentally by limited proteolysis. Here we show that as expected, proteins from the same family give very similar building blocks. However, different proteins can also give building blocks that are similar in structure. In such cases the building blocks differ in sequence, stability, contacts with other building blocks, and in their 3D locations in the protein structure. This result, which we have repeatedly observed in many cases, leads us to conclude that while a building block is influenced by its environment, nevertheless, it can be viewed as a stand-alone unit. For small-sized building blocks existing in multiple conformations, interactions with sister building blocks in the protein will increase the population time of the native conformer. With this conclusion in hand, it is possible to develop an algorithm that predicts the building block assignment of a protein sequence whose structure is unknown. Toward this goal, we have created sequentially nonredundant databases of building block sequences. A protein sequence can be aligned against these, in order to be matched to a set of potential building blocks.     

Assembly models for Papovaviridae based on tiling theory

A vital constituent of a virus is its protein shell, called the viral capsid, that encapsulates and hence provides protection for the viral genome. Assembly models are developed for viral capsids built from protein building blocks that can assume different local bonding structures in the capsid. This situation occurs, for example, for viruses in the family of Papovaviridae, which are linked to cancer and are hence of particular interest for the health sector. More specifically, the viral capsids of the (pseudo-) T = 7 particles in this family consist of pentamers that exhibit two different types of bonding structures. While this scenario cannot be described mathematically in terms of Caspar-Klug theory (Caspar D L D and Klug A 1962 Cold Spring Harbor Symp. Quant. Biol. 27 1), it can be modelled via tiling theory (Twarock R 2004 J. Theor. Biol. 226 477). The latter is used to encode the local bonding environment of the building blocks in a combinatorial structure, called the assembly tree, which is a basic ingredient in the derivation of assembly models for Papovaviridae along the lines of the equilibrium approach of Zlotnick (Zlotnick A 1994 J. Mol. Biol. 241 59). A phase space formalism is introduced to characterize the changes in the assembly pathways and intermediates triggered by the variations in the association energies characterizing the bonds between the building blocks in the capsid. Furthermore, the assembly pathways and concentrations of the statistically dominant assembly intermediates are determined. The example of Simian virus 40 is discussed in detail.     

Nanomechanical strength mechanisms of hierarchical biological materials and tissues

Biological protein materials (BPMs), intriguing hierarchical structures formed by assembly of chemical building blocks, are crucial for critical functions of life. The structural details of BPMs are fascinating: They represent a combination of universally found motifs such as alpha-helices or beta-sheets with highly adapted protein structures such as cytoskeletal networks or spider silk nanocomposites. BPMs combine properties like strength and robustness, self-healing ability, adaptability, changeability, evolvability and others into multi-functional materials at a level unmatched in synthetic materials. The ability to achieve these properties depends critically on the particular traits of these materials, first and foremost their hierarchical architecture and seamless integration of material and structure, from nano to macro. Here, we provide a brief review of this field and outline new research directions, along with a review of recent research results in the development of structure-property relationships of biological protein materials exemplified in a study of vimentin intermediate filaments.     

Nanomechanical strength mechanisms of hierarchical biological materials and tissues

Biological protein materials (BPMs), intriguing hierarchical structures formed by assembly of chemical building blocks, are crucial for critical functions of life. The structural details of BPMs are fascinating: They represent a combination of universally found motifs such as α-helices or β-sheets with highly adapted protein structures such as cytoskeletal networks or spider silk nanocomposites. BPMs combine properties like strength and robustness, self-healing ability, adaptability, changeability, evolvability and others into multi-functional materials at a level unmatched in synthetic materials. The ability to achieve these properties depends critically on the particular traits of these materials, first and foremost their hierarchical architecture and seamless integration of material and structure, from nano to macro. Here, we provide a brief review of this field and outline new research directions, along with a review of recent research results in the development of structure–property relationships of biological protein materials exemplified in a study of vimentin intermediate filaments.     

Mef2s are required for thick filament formation in nascent muscle fibres

During skeletal muscle differentiation, the actomyosin motor is assembled into myofibrils, multiprotein machines that generate and transmit force to cell ends. How expression of muscle proteins is coordinated to build the myofibril is unknown. Here we show that zebrafish Mef2d and Mef2c proteins are required redundantly for assembly of myosin-containing thick filaments in nascent muscle fibres, but not for the earlier steps of skeletal muscle fibre differentiation, elongation, fusion or thin filament gene expression. mef2d mRNA and protein is present in myoblasts, whereas mef2c expression commences in muscle fibres. Knockdown of both Mef2s with antisense morpholino oligonucleotides or in mutant fish blocks muscle function and prevents sarcomere assembly. Cell transplantation and heat-shock-driven rescue reveal a cell-autonomous requirement for Mef2 within fibres. In nascent fibres, Mef2 drives expression of genes encoding thick, but not thin, filament proteins. Among genes analysed, myosin heavy and light chains and myosin-binding protein C require Mef2 for normal expression, whereas actin, tropomyosin and troponin do not. Our findings show that Mef2 controls skeletal muscle formation after terminal differentiation and define a new maturation step in vertebrate skeletal muscle development at which thick filament gene expression is controlled.     

Programmable reactivity-based one-pot oligosaccharide synthesis

A detailed protocol is described for the application of a programmable one-pot oligosaccharide synthesis methodology to the synthesis of fucosyl GM1. This serves as a general example of the application of this method to the synthesis of any desired oligosaccharide. The method relies on a large database of relative reactivities for differentially protected tolyl thioglycoside donor molecules and a computer program to suggest the best order of addition for assembly of the oligosaccharide in optimal yield and with the fewest operations. The product is a protected form of the desired oligosaccharide isolated in 47% yield, which is then deprotected using standard procedures to provide fucosyl GM1 oligosaccharide (1) in 44% yield. The total time for synthesis of 1 from building blocks 3, 4 and 5 is approximately 4 d, whereas synthesis of the same compound by traditional stepwise procedures would take significantly longer. Protocols for the synthesis of thioglycoside building blocks 3 and 4 are also described.     

Mechanical unfoldons as building blocks of maltose-binding protein

Identifying independently folding cores or substructures is important for understanding and assaying the structure, function and assembly of large proteins. Here, we suggest mechanical stability as a criterion to identify building blocks of the 366 amino acid maltose-binding protein (MBP). We find that MBP, when pulled at its termini, unfolds via three (meta-) stable unfolding intermediates. Consequently, the MBP structure consists of four structural blocks (unfoldons) that detach sequentially from the folded structure upon force application. We used cysteine cross-link mutations to characterize the four unfoldons structurally. We showed that many MBP constructs composed of those building blocks indeed form stably folded structures in solution. Mechanical unfoldons may provide a new tool for a systematic search for stable substructures of large proteins.     

Practical synthesis of a tetrasaccharide derivative corresponding to ristomycin A and ristocetin A

A practical synthesis of fully benzoylated tetrasaccharide, whose free form is indispensable to the antibiotic ristomycin A for the process of dimerization and binding to the cell wall, was achieved via sequential assembly of the building blocks, allyl 3,4-di-O-benzoyl-alpha-D-glucopyranoside, 2,3,4-tri-O-benzoyl-alpha-L-rhamnopyranosyl trichloroacetimidate, 2-O-acetyl-3,4,6-tri-O-benzoyl-alpha-D-mannopyranosyl trichloroacetimidate, and 2,3,5-tri-O-benzoyl-alpha-D-arabinofuranosyl trichloroacetimidate. A one-pot preparation of allyl 3,4-di-O-benzoyl-2-O-tert-butyldimethylsilyl-6-O-triphenylmethyl-alpha-D-glucopyranoside is described, and regioselective glycosylation is carried out using perbenzoylated sugar trichloroacetimidates as glycosyl donors in the presence of a catalytic amount of trimethylsilyl trifluoromethanesulfonate (TMSOTf).     

Circular dichroism studies of low molecular weight hydrogelators: The use of SRCD and addressing practical issues

Circular dichroism (CD) spectroscopy has been used extensively for the investigation of the conformation and configuration of chiral molecules, but its use for evaluating the mode of self‐assembly in soft materials has been limited. Herein, we report a protocol for the study of such materials by electronic CD spectroscopy using commercial/benchtop instruments and synchrotron radiation (SR) using the B23 beamline available at Diamond Light Source. The use of the B23 beamtime for SRCD was advantageous because of the unique enhanced spatial resolution achieved because of its highly collimated and small beamlight cross section (ca. 250 μm) and higher photon flux in the far UV region (175‐250 nm) enhancing the signal‐to‐noise ratio relative to benchtop CD instruments. A set of low molecular weight (LMW) hydrogelators, comprising two Fmoc‐protected enantiomeric monosaccharides and one Fmoc dipeptide (Fmoc‐FF), were studied. The research focused on the optimization of sample preparation and handling, which then enabled the characterization of sample conformational homogeneity and thermal stability. CD spectroscopy, in combination with other spectroscopic techniques and microscopy, will allow a better insight into the self‐assembly of chiral building blocks into higher order structural architectures.     

Synthesis and applications of oligoribonucleotides with selected 2''-O-methylation using the 2''-O-[1-(2-fluorophenyl)-4-methoxypiperidin-4-yl] protecting group.

The synthesis of base protected 5'-O-dimethoxytrityl-2'-O-[1-(2- fluorophenyl)-4-methoxypiperidin-4-yl]-3'-O-(2-cyanoethyl N,N-diisopropylphosphoramidites) is described, using phenoxyacetyl protection for the exocyclic amino groups of guanosine and adenosine and acetyl protection of the amino group of cytidine. High yield assembly of these building blocks into oligoribonucleotides on aminopropyl controlled pore glass was achieved using 5-(4-nitrophenyl)-1H-tetrazole as activator. Mixed sequences containing selected 2'-O-methylation were also synthesised and their significance for the study of RNA biochemistry is discussed.