Vibrational infrared conformational studies of model peptides representing the semicrystalline domains of Bombyx mori silk fibroin

The structural organization of Bombyx mori silk fibroin was investigated by infrared (IR) spectroscopy. To this aim, (AG)15 and other model peptides of varying chain length, containing tyrosine (Y), valine (V), and serine (S) in the basic (AG)n sequence were synthesized by the solid phase method and their spectroscopic properties were determined. Both the position and the relative content of Y, V, and S residues in the (AG)n model system appeared critical in determining the preferred conformation, i.e., silk I, silk II, and unordered structures. Curve fitting analysis in the amide I range showed that the model peptides with prevailing silk II structure displayed different beta-sheet content, which was dependent on the degree of interruption of the (AG)n sequence. In this regard, the bands at about 1000 and 980 cm(-1), specifically assigned to the AG sequence of the B. mori silk fibroin chain, were identified as marker of the degree of interruption of the (AG)n sequence.A stable silk I structure was observed only when the Y residue was located near the chain terminus, while a silk I --> silk II conformational transition occurred when it was positioned in the central region of the peptide.Analysis of the second-derivative spectra in the amide I range allowed us to identify a band at 1639 cm(-1) (4 --> 1 hydrogen-bonded type II beta-turns), which is characteristic of the silk I conformation.     

Structural analysis of Bombyx mori silk fibroin peptides with formic acid treatment using high-resolution solid-state 13C NMR spectroscopy

Bombyx mori silk fibroin fiber is a fibrous protein produced by the silkworm at room temperature and from an aqueous solution whose primary structure is highly repetitive. In this study we analyzed the structural characteristics of native peptides, derived from B. mori silk fibroin, with formic acid treatment using high-resolution solid-state 13C NMR. We establish that the Ser residue bearing a short polar side chain has the ability to stabilize the conformation formed in the model peptides due to its ability to form intermolecular hydrogen bonds involving its hydroxyl group as a donor and the carbonyl groups of other residues as acceptors. On the other hand, insertion of Tyr residue in the basic (AG)n and (AGSGAG)n sequence motifs usually exhibited disruptive effects on the preferred conformations. Moreover, the environmental effect was investigated by mixing the native Cp fraction with the model peptides, showing that there is no significant structural difference on the Ser-containing peptides, while structural transformation was observed on the peptides containing the GAAS unit. This may be attributed to the fact that the Cp fraction promotes the formation of an antiparallel beta-sheet in the Ala-Ala unit. Such periodically disrupted ordered structures in the semicrystalline region of B. mori silk fibroin may be critical not only for facilitating the conformational transformation from silk I to silk II structural form but also for having some correlation with the unique properties of the silk materials.     

Vibrational 13C-cross-polarization/magic angle spinning NMR spectroscopic and thermal characterization of poly(alanine-glycine) as model for silk I Bombyx mori fibroin

This study focuses on the conformational characterization of poly(alanine-glycine) II (pAG II) as a model for a Bombyx mori fibroin silk I structure. Raman, IR, and 13C-cross-polarization/magic angle spinning NMR spectra of pAG II are discussed in comparison with those of the crystalline fraction of B. mori silk fibroin (chymotryptic precipitate, Cp) with a silk I (silk I-Cp) structure. The spectral data give evidence that silk I-Cp and the synthetic copolypeptide pAG II have similar conformations. Moreover, the spectral findings reveal that silk I-Cp is more crystalline than pAG II; consequently, the latter contains a larger amount of the random coil conformation. Differential scanning calorimetry measurements confirm this result. N-Deuteration experiments on pAG II allow us to attribute the Raman component at 1320 cm(-1) to the amide III mode of a beta-turn type II conformation, thus confirming the results of those who propose a repeated beta-turn type II structure for silk I. The analysis of the Raman spectra in the nuNH region confirms that the silk I structure is characterized by the presence of different types of H-bonding arrangements, in agreement with the above model.     

13C CP/MAS NMR study on structural heterogeneity in Bombyx mori silk fiber and their generation by stretching

It is important to resolve the structure of Bombyx mori silk fibroin before spinning (silk I) and after spinning (silk II), and the mechanism of the structural transition during fiber formation in developing new silk-like fiber. The silk I structure has been recently resolved by (13)C solid-state NMR as a "repeated beta-turn type II structure." Here, we used (13)C solid-state NMR to clarify the heterogeneous structure of the natural fiber from Bombyx mori silk fibroin in the silk II form. Interestingly, the (13)C CP/MAS NMR revealed a broad and asymmetric peak for the Ala Cbeta carbon. The relative proportions of the various heterogeneous components were determined from their relative peak intensities after line shape deconvolution. Namely, for 56% crystalline fraction (mainly repeated Ala-Gly-Ser-Gly-Ala-Gly sequences), 18% distorted beta-turn, 13% beta-sheet (parallel Ala residues), and 25% beta-sheet (alternating Ala residues). The remaining fraction of 44% amorphous Tyr-rich region, 22% in both distorted beta-turn and distorted beta-sheet. Such a heterogeneous structure including distorted beta-turn can be observed for the peptides (AG)(n) (n > 9 ). The structural change from silk I to silk II occurs exclusively for the sequence (Ala-Gly-Ser-Gly-Ala-Gly)(n) in B. mori silk fibroin. The generation of the heterogeneous structure can be studied by change in the Ala Cbeta peak of (13)C CP/MAS NMR spectra of the silk fibroin samples with different stretching ratios.     

NMR analysis of the fibronectin cell-adhesive sequence, Arg-Gly-Asp, in a recombinant silk-like protein and a model peptide

It is well established that by introducing the cell-adhesive sequence Arg-Gly-Asp (RGD) from fibronectin into Bombyx mori silk fibroin by covalent coupling or bioengineering techniques, excellent biomaterials have been developed with the modified silk fibroin. However, there is no report about the structure and dynamics of the RGD moiety in the silk fibroin. To clarify the origin of such a high cell adhesion character and to design new recombinant silk protein with higher cell adhesion ability, it is necessary to characterize the structure and dynamics of the RGD moiety introduced into silk fibroin. In this study, the structure and dynamics of the RGD moiety in a recombinant silk-like protein, SLPF(10), consisting of the repeated silk fibroin sequence (AGSGAG)(3) and the sequence ASTGRGDSPA including the RGD moiety, were studied using solution NMR. The (1)H, (15)N, and (13)C chemical shifts indicate that the RGD moiety, as well as the silk fibroin sequence, takes a random coil form with high mobility in aqueous solution. Next, a (13)C solid-state NMR study was performed on a (13)C selectively labeled model peptide, AGSGAG[3-(13)C]A(7)GSGAGAGSGGT[2-(13)C]G(19)R[1-(13)C]G(21)DSPAGGGAGAGSGAG. After formic acid treatment, an increase in the β-sheet fraction for the AGSGAG sequence and peak narrowing of the residues around the RGD moiety were observed in the dry state. The latter indicates a decrease in the chemical shift distribution although the RGD moiety is still in random coil. A decrease in the peak intensities of the RGD moiety in the swollen state after immersing it in distilled water was observed, indicating high mobility of the RGD sequence in the peptide in the swollen state. Thus, the random coil state of the RGD moiety in the recombinant silk-like protein is maintained in aqueous solution and also in both dry and swollen state. This is similar to the case of the RGD moiety in fibronectin. The presence of the linker ASTG at the N-terminus and SPAGG at the C-terminus seems important to maintain the random coil form and the flexible state of the RGD sequence in order to permit access for binding to various integrins.     

Possible implications of serine and tyrosine residues and intermolecular interactions on the appearance of silk I structure of Bombyx mori silk fibroin-derived synthetic peptides: high-resolution 13C cross-polarization/magic-angle spinning NMR study

Bombyx mori silk fibroin molecule is known to exist in two distinct structural forms: silk I (unprocessed silk fibroin) and silk II (processed silk fibroin). Using synthetic peptides, we attempt to explore the structural role played by Ser and Tyr residues on the appearance of silk I structural form of the fibroin. Twelve selected peptides (1-12) incorporating Ser and Tyr residues in the (Ala-Gly)(n) copolypeptide, that is, the sequences mimicking the primary structure of B. mori silk fibroin molecule, have been investigated under the silk I state, employing high-resolution (13)C cross-polarization/magic-angle spinning (CP/MAS) NMR spectroscopy. To acquire the silk I structural form, all the peptides were dissolved in 9 M LiBr and then dialyzed extensively against water, as established previously for the synthetic (Ala-Gly)(15) copolypeptide and B. mori silk fibroin. The diagnostic line shape of the Ala C(beta) peaks and the conformation-dependent (13)C chemical shifts of Ala and Gly resonances are presented to analyze and characterize the structural features. The results indicate that the incorporation of one Ser and/or one Tyr residue(s) at selected position in the basic (Ala-Gly)(15) sequence tend to retain predominantly the silk I structure. Conversely, the repeat pentameric and octameric Ala-Gly-Ser-Gly-Ala-Gly sequences, for example, (Ala-Gly-Ser-Gly-Ala-Gly)(5) or (Ala-Gly-Ser-Gly-Ala-Gly)(8), preferred predominantly the silk II form. The peptide sequences incorporating Ser and Tyr residue(s) into repeat Ala-Gly-Ser-Gly-Ala-Gly sequences, however, adopted the silk II structure with certain content structural heterogeneity or randomness, more pronounced for specific peptides studied. Interestingly, the crystalline Cp fraction of B. mori silk fibroin, when mixed with (Ala-Gly-Ser-Gly-Ala-Gly)(5) sequence in a 5:1 molar ratio, dissolved in 9 M LiBr, and dialyzed against distilled water, favor the silk I form. The finding tends to suggest that the less stable silk I form in (Ala-Gly-Ser-Gly-Ala-Gly)(n) sequences is likely to be induced and facilitated via intermolecular interactions with the Cp fraction, which predominantly prefers the silk I form under similar conditions; however, the hydrogen-bond formation involving O(gamma)H groups of the Ser residues may have some implications.     

The role of irregular unit,GAAS, on the secondary structure of Bombyx mori silk fibroin studied with 13C CP/MAS NMR and wide-angle X-ray scattering

Bombyx mori silk fibroin is a fibrous protein whose fiber is extremely strong and tough, although it is produced by the silkworm at room temperature and from an aqueous solution. The primary structure is mainly Ala-Gly alternative copolypeptide, but Gly-Ala-Ala-Ser units appear frequently and periodically. Thus, this study aims at elucidating the role of such Gly-Ala-Ala-Ser units on the secondary structure. The sequential model peptides containing Gly-Ala-Ala-Ser units selected from the primary structure of B. mori silk fibroin were synthesized, and their secondary structure was studied with (13)C CP/MAS NMR and wide-angle X-ray scattering. The (13)C isotope labeling of the peptides and the (13)C conformation-dependent chemical shifts were used for the purpose. The Ala-Ala units take antiparallel beta-sheet structure locally, and the introduction of one Ala-Ala unit in (Ala-Gly)(15) chain promotes dramatical structural changes from silk I (repeated beta-turn type II structure) to silk II (antiparallel beta-sheet structure). Thus, the presence of Ala-Ala units in B. mori silk fibroin chain will be one of the inducing factors of the structural transition for silk fiber formation. The role of Tyr residue in the peptide chain was also studied and clarified to induce "locally nonordered structure."     

Effects of pH and calcium ions on the conformational transitions in silk fibroin using 2D Raman correlation spectroscopy and 13C solid-state NMR

Silk fibroin exists in a number of different states, such as silk I and silk II, with different properties largely defined by differences in secondary structure composition. Numerous attempts have been made to control the transitions from silk I to silk II in vitro to produce high-performance materials. Of all the factors influencing the structural compositions, pH and some metal ions play important roles. This paper focuses on the influence of pH and Ca(2+) ions on the conformational transition from silk I to silk II in regenerated (redissolved) Bombyx mori fibroin. One- and two-dimensional correlation Raman spectroscopy was used to describe qualitatively the transitions in secondary structure in silk I, silk II, and their intermediates as pH and Ca(2+) ion concentration were changed, while (13)C cross polarization magic angle spinning (CP/MAS) solid-state NMR was used to quantify these changes. We showed that conditions (low pH, pH 5.2; a defined range of Ca(2+) ion concentrations; gradual water removal) that mimic natural silk spinning promote the formations of beta-sheet and distorted beta-sheet characteristic of silk II or silk II-related intermediate. In contrast, higher pH (pH 6.9-8.0) and higher Ca(2+) ion concentrations maintain "random coil" conformations typical of silk I or silk I-related intermediate. These results help to explain why the natural silk spinning process is attended by a reduction in pH from 6.9 to 4.8 and a change in the Ca(2+) ion concentration in the gland lumen as fibroin passes from the posterior division through the secretory pathway to the anterior division.     

Copper in the silk formation process of Bombyx mori silkworm

Evidence is presented here that cupric ions play a part in the natural spinning of Bombyx mori silk. Proton induced X-ray emission studies revealed that the copper content increased from the posterior part to the anterior part of silk gland, and then further increased in the silk fiber. Spectrophotometric analysis demonstrated that cupric ions formed coordination complexes with silk fibroin chains while Raman spectroscopy indicated that they induced a conformation transition from random coil/helix to beta-sheet. Taken together these findings indicate that copper could play a role in the natural spinning process in silkworms.     

Fabrication and characterization of biomaterial film from gland silk of muga and eri silkworms

This study discusses the possibilities of liquid silk (Silk gland silk) of Muga and Eri silk, the indigenous non mulberry silkworms of North Eastern region of India, as potential biomaterials. Silk protein fibroin of Bombyx mori, commonly known as mulberry silkworm, has been extensively studied as a versatile biomaterial. As properties of different silk‐based biomaterials vary significantly, it is important to characterize the non mulberry silkworms also in this aspect. Fibroin was extracted from the posterior silk gland of full grown fifth instars larvae, and 2D film was fabricated using standard methods. The films were characterized using SEM, Dynamic contact angle test, FTIR, XRD, DSC, and TGA and compared with respective silk fibers. SEM images of films reveal presence of some globules and filamentous structure. Films of both the silkworms were found to be amorphous with random coil conformation, hydrophobic in nature, and resistant to organic solvents. Non mulberry silk films had higher thermal resistance than mulberry silk. Fibers were thermally more stable than the films. This study provides insight into the new arena of research in application of liquid silk of non mulberry silkworms as biomaterials. © 2012 Wiley Periodicals, Inc. Biopolymers 99: 292–333, 2013.     

Distinctive influence of two hexafluoro solvents on the structural stabilization of Bombyx mori silk fibroin protein and its derived peptides: 13C NMR and CD studies

Employing high-resolution (13)C solution NMR and circular dichroism (CD) spectroscopic techniques, the distinctive influence of two intimately related hexafluoro solvents, 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) and hexafluoroacetone trihydrate (HFA), on the structural characteristics of Bombyx mori (B. mori) silk fibroin, the chymotrypsin precipitate (C(p)) fraction, and two synthetic peptides, (AGSGAG)(5) and (AG)(15), is described. The observed (13)C solution NMR and CD spectra of these polypeptides in HFIP and HFA revealed a distinctive influence on their conformational characteristics. The (13)C NMR spectra, as analyzed from the unique chemical shifts of C(alpha) and C(beta) resonances of constituent residues revealed that fibroin largely assumes helical conformation(s) in both solvents. However, the peak shifts were greater for the samples in HFIP, indicating that the types of helical structure(s) may be different from the one populated in HFA. Similar structural tendencies of these polypeptides were reflected in CD spectra. The observed CD patterns, i.e., a strong positive band at approximately 190 nm and negative bands at approximately 206 and 222 nm, have been attributed to the preponderance of helical structures. Of the two prevalent helical structures, alpha-helix and 3(10)-helix, the evidence emerged for the fibroin protein in favor of 3(10)-helical structure stabilization in HFIP and its significant disruption in HFA, as deduced from the characteristic R1 (=[theta](190)/[theta](202)) and R2 (=[theta](222)/[theta](206)) ratios, determined from the CD data. Conversely, the native polypeptides and synthetic peptide fragments derived from highly crystalline regions of the silk fibroin protein sustained predominantly an unordered structure in HFA solvent.     

Structure of Bombyx mori silk fibroin before spinning in solid state studied with wide angle x-ray scattering and (13)C cross-polarization/magic angle spinning NMR

The structure of a crystalline form of Bombyx mori silk fibroin, commonly found before the spinning process (known as silk I), has been proposed as a repeated beta-turn type II-like structure by combining data obtained from solid-state two dimensional spin-diffusion nuclear magnetic resonance and rotational-echo double-resonance (T. Asakura et al., J Mol Biol, in press). In this paper, the WAXS pattern of alanine-glycine alternating copolypeptide, (Ala-Gly)(15) with silk I form which was used for a silk I model of B. mori silk fibroin was observed. The pattern calculated with the silk I model proposed by us is well reproduced the observed one, indicating the validity of the proposed silk I model. In addition, two peptides of the other repeated sequences which contain Tyr or Val residues in the silk fibroin,23 were synthesized; (Ala-Gly-Tyr-Gly-Ala-Gly)(5) and (X-Gly)(15) where X is Tyr for the 7th, 15th and 23th residues, and Val for the 11th residue and Ala for other residues. There are no sharp peaks in the WAXS patterns, and therefore both samples are in the non-crystalline state. This is in agreement with the (13)C CP/MAS NMR result, where the conformation is mainly random coil.     

A study on the flow stability of regenerated silk fibroin aqueous solution

The flow stability of silk fibroin (SF) aqueous solutions with different concentrations under different temperatures was investigated. It was found that the flow stability decreased quickly with the increase of solution concentration and temperature. X-ray diffraction, Fourier transform infrared (FTIR) and Raman spectroscopy analysis showed that silk fibroin in aqueous solution was mainly in random coil and alpha-helix conformation. However, it turned into alpha-helix and beta-sheet conformation after gelation, and both silk I and silk II crystalline structures appeared accordingly. The investigation implies that the original dilute regenerated SF aqueous solution should be stored under low temperature and concentrated just before spinning.     

Comparative structure analysis of tyrosine and valine residues in unprocessed silk fibroin (silk I) and in the processed silk fiber (silk II) from Bombyx mori using solid-state (13)C,(15)N, and (2)H NMR

The solid-state (13)C CP-MAS NMR spectra of biosynthetically labeled [(13)C(alpha)]Tyr, [(13)C(beta)]Tyr, and [(13)C(alpha)]Val silk fibroin samples of Bombyx mori, in silk I (the solid-state structure before spinning) and silk II (the solid-state structure after spinning) forms, have been examined to gain insight into the conformational preferences of the semicrystalline regions. To establish the relationship between the primary structure of B. mori silk fibroin and the "local" structure, the conformation-dependent (13)C chemical shift contour plots for Tyr C(alpha), Tyr C(beta), and Val C(alpha) carbons were generated from the atomic coordinates of high-resolution crystal structures of 40 proteins and their characteristic (13)C isotropic NMR chemical shifts. From comparison of the observed Tyr C(alpha) and Tyr C(beta) chemical shifts with those predicted by the contour plots, there is strong evidence in favor of an antiparallel beta-sheet structure of the Tyr residues in the silk fibroin fibers. On the other hand, Tyr residues take a random coil conformation in the fibroin film with a silk I form. The Val residues are likely to assume a structure similar to those of Tyr residues in silk fiber and film. Solid-state (2)H NMR measurements of [3,3-(2)H(2)]Tyr-labeled B. mori silk fibroin indicate that the local mobility of the backbone and the C(alpha)-C(beta) bond is essentially "static" in both silk I and silk II forms. The orientation-dependent (i.e., parallel and perpendicular to the magnetic field) solid-state (15)N NMR spectra of biosynthetically labeled [(15)N]Tyr and [(15)N]Val silk fibers reveal the presence of highly oriented semicrystalline regions.     

Thermally induced increase in energy transport capacity of silkworm silks

This work reports on the first study of thermally induced effect on energy transport in single filaments of silkworm (Bombyx mori) fibroin degummed mild (type 1), moderate (type 2), to strong (type 3). After heat treatment from 140 to 220°C, the thermal diffusivity of silk fibroin type 1, 2, and 3 increases up to 37.9, 20.9, and 21.5%, respectively. Our detailed scanning electron microscopy study confirms that the sample diameter change is almost negligible before and after heat treatment. Raman analysis is performed on the original and heat‐treated (at 147°C) samples. After heat treatment at 147°C, the Raman peaks at 1081, 1230, and 1665 cm^?1 become stronger and narrower, indicating structural transformation from amorphous to crystalline. A structure model composed of amorphous, crystalline, and laterally ordered regions is proposed to explain the structural change by heat treatment. Owing to the close packing of more adjacent laterally ordered regions, the number and size of the crystalline regions of Bombyx mori silk fibroin increase by heat treatment. This structure change gives the observed significant thermal diffusivity increase by heat treatment. © 2014 Wiley Periodicals, Inc. Biopolymers 101: 1029–1037, 2014.     

Structural evolution of regenerated silk fibroin under shear: combined wide- and small-angle x-ray scattering experiments using synchrotron radiation

The structural evolution of regenerated Bombyx mori silk fibroin during shearing with a Couette cell has been studied in situ by synchrotron radiation small- and wide-angle x-ray scattering techniques. An elongation of fibroin molecules was observed with increasing shear rate, followed by an aggregation phase. The aggregates were found to be amorphous with beta-conformation according to infrared spectroscopy. Scanning x-ray microdiffraction with a 5 microm beam on aggregated material, which had solidified in air, showed silk II reflections and a material with equatorial reflections close to the silk I structure reflections, but with strong differences in reflection intensities. This silk I type material shows up to two low-angle peaks suggesting the presence of water molecules that might be intercalated between hydrogen-bonded sheets.     

Design, expression and solid-state NMR characterization of silk-like materials constructed from sequences of spider silk, Samia cynthia ricini and Bombyx mori silk fibroins

Silk has a long history of use in medicine as sutures. To address the requirements of a mechanically robust and biocompatible material, basic research to clarify the role of repeated sequences in silk fibroin in its structures and properties seems important as well as the development of a processing technique suitable for the preparation of fibers with excellent mechanical properties. In this study, three silk-like protein analogs were constructed from two regions selected from among the crystalline region of Bombyx mori silk fibroin, (GAGSGA)(2), the crystalline region of Samia cynthia ricini silk fibroin, (Ala)(12), the crystalline region of spider dragline silk fibroin, (Ala)(6), and the Gly-rich region of spider silk fibroin, (GGA)(4). The silk-like protein analog constructed from the crystalline regions of the spider dragline silk and B. mori silk fibroins, (A(6)SCS)(8), that constructed from the crystalline regions of the S. c.ricini and B. mori silk fibroins, (A(12)SGS)(4), that constructed from and the crystalline region of S. c.ricini silk fibroin and the glycine-rich region of spider dragline silk fibroin, (A(12)SGS)(4),were expressed their molecular weights being about 36.0 kDa, 17.0 kDa and 17.5 kDa, respectively in E. coli by means of genetic engineering technologies. (A(12)SCS)(4) and (A(12)SGS)(4 )undergo a structural transition from alpha-helix to beta-sheet on a change in the solvent treatment from trifluoroacetic acid (TFA) to formic acid (FA). However, (A(6)SCS)(8) takes on the beta-sheet structure predominantly on TFA treatment and FA treatment. Structural analysis was performed on model peptides selected from spider dragline and S. c.ricini silks by means of (13)C CP/MAS NMR.     

Structure and properties of regenerated Antheraea pernyi silk fibroin in aqueous solution

Antheraea pernyi silk fibroin fibers were dissolved by aqueous lithium thiocyanate to obtain regenerated A. pernyi silk fibroin solution. By means of circular dichroism, ¹³C NMR and Raman spectroscopy, the molecular conformation of regenerated A. pernyi silk fibroin in aqueous solution was investigated. The relationship of environmental factors and sol–gel transformation behavior of regenerated A. pernyi silk fibroin was also studied. The molecular conformations of regenerated A. pernyi silk fibroin mainly were -helix and random coil in solution. There also existed a little β-sheet conformation. It was obviously different with Bombyx mori silk fibroin, whose molecular conformation in solution was only random coil but no -helix existence. With the increase of temperature and solution concentration and with the decrease of solution pH value, the gelation velocity of regenerated A. pernyi silk fibroin solution increased. Especially, it showed that A. pernyi silk fibroin was more sensitive to temperature than B. mori silk fibroin during the sol–gel transformation. The velocity increased obviously when the temperature was above 30 °C. During the sol–gel transformation, the molecular conformation of regenerated A. pernyi silk fibroin changed from random coil to β-sheet structure. The results of these studies provided important insight into the preparation of new biomaterials by silk fibroin protein.     

Effect of EGCG On Fe(III)‐induced conformational transition of silk fibroin,a model of protein related to neurodegenerative diseases

The abnormal aggregation of amyloid proteins is reported to play a critical role in the etiology of neurodegenerative disorders. Studies have shown that excessive ferric irons are associated with the misfolding of amyloid proteins, and that (‐)‐epigallocatechin gallate (EGCG) is a good metallic ion chelator with inhibitory effect on the aggregation of amyloid proteins. EGCG has been thus considered as a potential drug candidate for the treatment of neurodegenerative diseases. However, the mechanism of action for EGCG in inhibition of aggregation of amyloid proteins is still remaining unclear. Silk fibroin (SF) shares similarities with amyloid proteins in some amino acid sequences and fibrillation kinetics. In this work, therefore, we used SF as a model of protein to investigate the effects of Fe(III) and EGCG on conformational transition by using turbidity assay, thioflavin T (ThT) fluorescence spectroscopy, Raman spectroscopy, and atomic force microscope (AFM). We demonstrated that low concentration of Fe(III) ions promoted the formation of β‐sheet conformers, while high concentration of Fe(III) ions inhibited further aggregation of SF. EGCG could significantly inhibit the conformational transition of SF when induced by Fe(III), and decrease the amount of β‐sheet conformers dose‐dependently. The findings provide important information regarding to EGCG as a potential agent for the prevention and treatment of neurodegenerative diseases. Fe(III) can accelerate the conformation transition of silk fibrion (SF) from random coil into β‐sheet, while (‐)‐epigallocatechin gallate (EGCG) inhibits Fe(III)‐induced β‐sheet aggregation of SF., 2016. © 2015 Wiley Periodicals, Inc. Biopolymers 105: 100–107, 2016     

Structural analysis of silk with 13C NMR chemical shift contour plots.

The polymorphic structures of silk fibroins in the solid state were examined on the basis of a quantitative relationship between the 13C chemical shift and local structure in proteins. To determine this relationship, 13C chemical shift contour plots for C alpha and C beta carbons of Ala and Ser residues, and the C alpha chemical shift plot for Gly residues were prepared using atomic co-ordinates from the Protein Data Bank and 13C NMR chemical shift data in aqueous solution reported for 40 proteins. The 13C CP/MAS NMR chemical shifts of Ala, Ser and Gly residues of Bombyx mori silk fibroin in silk I and silk II forms were used along with 13C CP/MAS NMR chemical shifts of Ala residues of Samia cynthia ricini silk fibroin in beta-sheet and alpha-helix forms for the structure analyses of silk fibroins. The allowed regions in the 13C chemical shift contour plots for C alpha and C beta carbons of Ala and Ser residues for the structures in silk fibroins, i.e. Silk II, Silk I and alpha-helix, were determined using their 13C isotropic NMR chemical shifts in the solid state. There are two area of the phi,psi map which satisfy the observed Silk I chemical shift data for both the C alpha and C beta carbons of Ala and Ser residues in the 13C chemical shift contour plots.