Synthesis and reactivity of coordinatively unsaturated osmium and ruthenium stannyl complexes

Treatment of MHCl(CO)(PPh₃)₃ (M=Ru, Os) with (CH₂=CH)SnR₃ is a good general route to the coordinatively unsaturated osmium and ruthenium stannyl complexes M(SnR₃)Cl(CO)(PPh₃)₂ (1: M=Ru, R=Me; 2: M=Ru, R = n-butyl; 3: M=Ru, R = p-tolyl; 4: M=Os, R=Me). These coordinatively unsaturated complexes readily add CO and CN-p-tolyl to form the coordinatively saturated compounds M(SnR₃)Cl(CO)L(PPh₃)₂ (5: M=Ru, R=Me, L=CO; 6: M=;Ru, R = n-butyl, L=CO; 7: M=Ru, R = p-tolyl, L=CO; 8: M=Os, R=Me, L=CO; 9: M=Ru, R=Me, L=CN-p-tolyl; 10: M=Ru, R = n-butyl, L=CN-p-tolyl; 11: M=Os, R=Me, L=CN-p-tolyl). In addition, the chloride ligand in Ru(SnR₃)Cl(CO)(PPh₃)₂ proves to be labile and treatment with the potentially bidentate anionic ligands, dimethyldithiocarbamate or diethyldithiocarbamate, affords the coordinatively saturated compounds Ru(SnR₃)(η²-S₂CNR′₂)(CO)(PPh₃)₂ (12: R=Me, R′ = Me; 13: R=Me, R′ = Et; 14: R = n-butyl, R′ = Me; 15: R = p-tolyl, R′ = Me; 16: R = p-tolyl, R′ = Et). Chloride is also displaced by carboxylates forming the six-coordinate compounds Ru(SnR₃)(η²-O₂CR′)(CO)(PPh₃)₂ (17: R=Me, R′ = H; 18: R=Me, R′ = Me; 19: R=Me, R′ = Ph; 20: R = n-butyl, R′ = Me; 21: R = p-tolyl, R′ = Me). IR and ¹H NMR spectral data for all the new compounds and ³¹P and ¹¹⁹Sn NMR spectral data for selected compounds are reported.     

Mono-η complexes of chromium(II) and chromium(0). Electron demanding substituents, structural and spectroscopic data comparisons

Using thermal and photochemical methods a series of new chromium complexes has been prepared: (ν⁶-p-C₆H₄F₂)Cr(CO)₃; (ν⁶-C₆H₅CF₃)Cr(CO)₃; [m-C₆H₄(CF₃)₂]Cr(CO)₃; (ν⁶-C₆H₅F)Cr(CO)₂H(SiCl₃); (ν⁶-C₆H₅F)Cr(CO)₂(SiCl₃)₂; (p-C₆H₄F₂)Cr(CO)₂-H(SiCl₃); (C₆H₅CF₃)Cr(CO)₂H(SiCl₃(p-C₆H₄F₂)Cr(CO)₂(SiCl₃)₂; C₆H₅CF₃)Cr(CO)₂(SiCl₃)₂; [m-C₆H₄(CF₃)₂]Cr(CO)₂-H(SiCl₃); [m-C₆H₄(CF₃)₂]Cr(CO)₂(SiCl₃)₂. Two compounds were structurally characterized by X-ray diffraction. These data combined with IR and ¹H NMR have allowed assessment of some of the electronic and steric effects. The Cr-arene bond is considerably longer in the Cr(II) derivatives than in the Cr(0) species. Also the Cr center, as might be expected, is less electron rich in the Cr(II) dicarbonyl disilyl derivatives. The ν⁶-p-C₆H₄F₂ ligands are slightly folded so that the C---F carbons are moved further away from the Cr center. Comparison of structural and electronic effects is made with a series of similar chromium compounds reported in the literature. These new (arene)Cr(II) derivatives possess more labile ν⁶-arene ligands, which promise a rich chemistry at the chromium center.     

Methylene bridged binuclear bis(imino)pyridyl iron(II) complexes and their use as catalysts together with Al(i-Bu)3 for ethylene polymerization

Three novel methylene bridged binuclear iron(II) complexes: (R,R′ = i-C₃H₇ (6); R = i-C₃H₇, R′ = CH₃ (7); R,R′ = CH₃ (8))} have been synthesized. Activated by Al(i-Bu)₃, complex 6 shows very poor activity for the polymerization of ethylene at one bar ethylene pressure, whereas, 7 and 8 exhibit much higher activity than mononuclear iron catalysts {[ArNC(Me)C₅H₃N(Me)CNAr′]FeCl₂ (Ar,Ar′ = 2,6-C₆H₃-i-Pr (9); Ar = 2,6-C₆H₃-i-Pr₂, Ar′ = 2,6-C₆H₃–Me₂ (10); Ar,Ar′ = 2,6-C₆H₃–Me₂ (11))}. The molecular weight (M_w) of PE produced by 7 and 8 are in the range 13.2–46.0 × 10⁴ and much higher than those produced by mononuclear iron catalysts 9 and 10. GPC results demonstrate that 7 and 8 yield PE with a broad/bimodal molecular weight distribution (MWD). In contrast, 9 and 10 yield PE with relatively narrow and unimodal MWD (4.26 and 3.55). Elevating the temperature and Al/Fe molar ratio will narrow the MWD of PE.     

Reactions of the haloalcohols HO(CH2)nCl (n = 2, 3) with platinum(II) - alkynyl and -alkyne complexes. X-ray crystal structure of trans-[Pt(Me) {C(OCH2CH2Cl) (CH2Ph)} (PPh3)2] [BF4]

The chloro complexes trans-[Pt(Me)(Cl)(PPh₃)₂], after treatment with AgBF₄, react with 1-alkynes HC---C---R in the presence of NEt₃ to afford the corresponding acetylide derivatives trans-[Pt(Me) (C---C---R) (PPh₃)₂] (R = p-tolyl (1), Ph (2), C(CH₃)₃ (3)). These complexes, with the exception of the t-butylacetylide complex, react with the chloroalcohols HO(CH₂)_nCl (n = 2, 3) in the presence of 1 equiv. of HBF₄ to afford the alkyl(chloroalkoxy)carbene complexes trans-[Pt(Me) {C[O(CH₂)_nCl](CH₂R) } (PPh₃)₂][BF₄] (R = p-tolyl, N = 2 (4), N = 3 (5); R=Ph, N = 2 (6)). A similar reaction of the bis(acetylide) complex trans-[Pt(C---C---Ph)₂(PMe₂Ph)₂] with 2 equiv. HBF₄ and 3-chloro-1-propanol affords trans-[Pt(C---CPh) {C(OCH₂CH₂CH₂Cl)(CH₂Ph) } (PMe₂Ph)₂][BF₄] (7). T alkyl(chloroalkoxy)-carbene complex trans-[Pt(Me) {C(OCH₂CH₂Cl)(CH₂Ph) } (PPh₃)₂][BF₄] (8) is formed by reaction of trans-[Pt(Me)(Cl)(PPh₃)₂], after treatment with AgBF₄ in HOCH₂CH₂Cl, with phenylacetylene in the presence of 1 equiv. of n-BuLi. The reaction of the dimer [Pt(Cl)(μ-Cl)(PMe₂Ph)]₂ with p-tolylacetylene and 3-chloro-1-propanol yields cis-[PtCl₂{C(OCH₂CH₂CH₂Cl)(CH₂C₆H₄-p-Me}(PMe₂Ph)] (9). The X-ray molecular structure of (8) has been determined. It crystallizes in the orthorhombic system, space group Pna2₁, with a = 11.785(2), B = 29.418(4), C = 15.409(3) Å, V = 4889(1) ų and Z = 4. The carbene ligand is perpendicular to the Pt(II) coordination plane; the PtC(carbene) bond distance is 2.01(1) Å and the short C(carbene)-O bond distance of 1.30(1) Å suggests extensive electronic delocalization within the Pt---C(carbene)---O moietry.     

Dinuclear sulfide–thiolate complexes [Pt2(μ-S)(μ-SR)(PPh3)4] as cationic metalloligands

The cationic monoalkylated derivatives of the well-known metalloligand [Pt₂(μ-S)₂(PPh₃)₄], viz. [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺ (R = n-Bu, CH₂Ph) are themselves able to act as metalloligands towards the Ph₃PAu⁺ and R′Hg⁺ (R′ = Ph or ferrocenyl) fragments, by reaction with Ph₃PAuCl or R′HgCl, respectively. The resulting dicationic products [Pt₂(μ-SR)(μ-SAuPPh₃)(PPh₃)₄]²⁺ and [Pt₂(μ-SR)(μ-SHgR′)(PPh₃)₄]²⁺ are readily isolated as their hexafluorophosphate salts, and have been fully characterised by spectroscopic techniques and an X-ray structure determination on [Pt₂(μ-SR)(μ-SHgFc)(PPh₃)₄](PF₆)₂.     

Organometallic chemistry of diphosphazanes. Rhodium(I) complexes of RN(PX2)2 (R = C6H5; X = OC6H5, OC6H4Br−p, R = CH3; X = OC6H5)

Reactions of [Rh(COD)Cl]₂ with the ligand RN(PX₂)₂ (1: R = C₆H₅; X = OC₆H₅) give mono- or disubstituted complexes of the type [Rh₂(COD)Cl₂{ν²−C₆H₅N(P(OC₆H₅)₂)₂}] or [RhCl{ν²−C₆H₅ N(P(OC₆H₅)₂)₂ }]₂ depending on the reaction conditions. Reaction of 1 with [Rh(CO)₂Cl]₂ gives the symmetric binuclear complex, [Rh(CO)Cl{μ−C₆H₅N(P(OC₆H₅)₂)₂} ₂, whereas the same reaction with 2 (R = CH₃; X = OC₆H₅) leads to the formation of an asymmetric complex of the type [Rh(CO)(μ−CO)Cl{μ−CH₃N(P(OC₆H₅)₂)₂}₂ containing both terminal and bridging CO groups. Interestingly the reaction of 3 (R = C₆H₅, X = OC₆H₄Br−p with either [Rh(COD)Cl]₂ or [Rh(CO)₂Cl]₂ leads only to the formation of the chlorine bridged binuclear complex, [RhCl{ν²−C₆H₅N(P(OC₆H₄Br−p)₂)₂}]₂. The structural elucidation of the complexes was carried out by elemental analyses, IR and ³¹P NMR spectroscopic data.     

Alkene rotation in [Ru(η-C5H5) (L2) (η-alkene][CF3SO3] with L2 = iPr- or pTol-diazabutadiene. X-ray crystal structure of [Ru(η-C5H5(pTol-DAB) (η-ethene][CF3SO3]

Reaction of RuCl(η⁵-C₅H₅(pTol-DAB) with AgOTf (OTf = CF₃SO₃) in CH₂Cl₂ or THF and subsequent addition of L′ (L′ = ethene (a), dimethyl fumarate (b), fumaronitrile (c) or CO (d) led to the ionic complexes [Ru(η⁵-C₅H₅)(pTol-DAB)(L′)][OTf] 2a, 2b and 2d and [Ru(η⁵-C₅H₅)(pTol-DAB)(fumarontrile-N)][OTf] 5c. With the use of resonance Raman spectroscopy, the intense absorption bands of the complexes have been assigned to MLCT transitions to the iPr-DAB ligand. The X-ray structure determination of [Ru(η⁵-C₅H₅)(pTol-DAB)(η²-ethene)][CF₃SO₃] (2a) has been carried out. Crystal data for 2a: monoclinic, space group P2₁/n with A = 10.840(1), b = 16.639(1), C = 14.463(2) Å, β = 109.6(1)°, V = 2465.6(5) ų, Z = 4. Complex 2a has a piano stool structure, with the Cp ring η⁵-bonded, the pTol-DAB ligand σN, σN′ bonded (Ru-N distances 2.052(4) and 2.055(4) Å), and the ethene η²-bonded to the ruthenium center (Ru-C distances 2.217(9) and 2.206(8) Å). The C = C bond of the ethene is almost coplanar with the plane of the Cp ring, and the angle between the plane of the Cp ring and the double of the ethene is 1.8(0.2)°. The reaction of [RuCl(η⁵-C₅H₅)(PPh)₃ with AgOTf and ligands L′ = a and d led to [Ru(η⁵-C₅H₅)(PPh₃)₂(L′)]OTf] (3a) and (3d), respectively. By variable temperature NMR spectroscopy the rottional barrier of ethene (a), dimethyl fumarate (b and fumaronitrile (c) in complexes [Ru(η⁵-C₅H₅)(L₂)(η²-alkene][OTf] with L₂ = iPr-DAB (a, 1b, 1c), pTol-DAB (2a, 2b) and L = PPh₃ (3a) was determined. For 1a, 1b and 2b the barrier is 41.5±0.5, 62±1 and 59±1 kJ mol⁻¹, respectively. The intermediate exchange could not be reached for 1c, and the ΔG^# was estimated to be at least 61 kJ mol⁻. For 2a and 3a the slow exchange could not be reached. The rotational barrier for 2a was estimated to be 40 kJ mol⁻. The rotational barier for methyl propiolate (HC≡CC(O)OCH₃) (k) in complex [Ru(η⁵-C₅H₅)(iPr-DAB) η²-HC≡CC(O)OCH₃)][OTf] (1k) is 45.3±0.2 kJ mol⁻¹. The collected data show that the barrier of rotational of the alkene in complexes 1a, 2a, 1b, 2b and 1c does not correlate with the strength of the metal-alkene interaction in the ground state.     

Control of the migratory aptitudes of vinyl and aryl ligands in ruthenium(II) complexes

Complexes Ru(CO)₂ (CH=CHR) (C₆H₄X-4)L₂ (R=^tBu, Ph, OEt; X=H, Cl, OMe; L=PMe₃, PMe₂Ph, P(OMe)₂Ph) in which the two phosphorus ligands are mutually cis (isomer 1) react readily with ligands ^tBuNC, CO and P(OMe)₃ to give complexes in which one of the organic ligands has migrated onto a carbonyl ligand. Vinyl migration products (5) retain the mutually cis geometry of the phosphorus ligands, and are unstable: one of the decomposition products is the ketone RCH=CHC(O)C₆H₄X-4. Phenyl migration products (4) are stable and have the phosphorus ligands in mutually trans positions; an X-ray crystal structure of Ru(CO) (CN^tBu) {C(O)Ph} (CH=CHPh) (PMe₂Ph)₂ was obtained. In both cases, the incoming ligand enters trans to the newly formed acyl ligand. Vinyl migration is favoured over aryl migration by electron-donating substituents on the vinyl ligand, electron-withdrawing substituents on the aryl ligand, good σ-donor phosphorus ligands and use of ^tBuNC as the incoming ligand. The rate of phenyl migration in Ru(CO)₂(CH=CHPh)Ph(PMe₂Ph)₂ is independent of ^tBuNC concentration: k=1.5 × 10⁻³ s⁻¹ at 20°C. Isomer 3 of complexes Ru(CO)₂(CH=CHR) (C₆H₄X-4)L₂ in which the phosphorus ligands are mutually trans is much less reactive towards migration reactions. The reactivity of isomer 1 is attributed to the steric strain of two mutually cis phosphorus ligands.     

Hetero-polynuclear complexes containing bridging diphenylphosphino-alkenes and -alkynes. The crystal structure of an Rh2{μ−ν:ν−P(Ph2) (CH2)3C≡CR}Co2 complex

The phosphinoalkenes Ph₂P(CH₂)_nCH=CH₂ (n= 1, 2, 3) and phosphinoalkynes Ph₂P(CH₂)_n C≡CR (R = H, N = 2, 3; R = CH₃, N = 1) have been prepared and reacted with the dirhodium complex (η−C₅H₅)₂Rh₂(μ−CO) (μ−η²−CF₃C₂CF₃). Six new complexes of the type (ν−C₅H₅)₂(Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃)L, where L is a P-coordinated phosphinoalkene, or phosphinoalkyne have been isolated and fully characterized; the carbonyl and phosphine ligands are predominantly trans on the Rh---Rh bond, but there is spectroscopic evidence that a small amount of the cis-isomer is formed also. Treatment of the dirhodium-phosphinoalkene complexes with (η−CH₃C₅H₄)Mn(CO)₂thf resulted in coordination of the manganese to the alkene function. The Rh₂---Mn complex [(η−C₅H₅)₂Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃) {Ph₂P(CH₂)₃CH=CH₂} (η−CH₃C₅H₄)Mn(CO)₂] was fully characterized. Simi treatment of the dirhodium-phosphinoalkyne complexes with Co₂(CO)₈ resulted in the coordination of Co₂(CO)₆ to the alkyne function. The Rh₂---Co₂ complex [(η−C₅H₅)₂Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃) {Ph₂PCH₂C≡CCH₃}Co₂(CO)₂], C₃₇H₂₅Co₂F₆O₇PRh₂, was fully characteriz spectroscopically, and the molecular structure of this complex was determined by a single crystal X-ray diffraction study. It is triclinic, space group (C_i¹, No. 2) with a = 18.454(6), B = 11.418(3), C = 10.124(3) Å, = 112.16(2), β = 102.34(3), γ = 91.62(3)°, Z = 2. Conventional R on |F| was 0.052 fo observed (I > 3σ(I)) reflections. The Rh₂ and Co₂ parts of the molecule are distinct, the carbonyl and phosphine are mutually trans on the Rh---Rh bond, and the orientations of the alkynes are parallel for Rh₂ and perpendicular for Co₂. Attempts to induce Rh₂Co₂ cluster formation were unsuccessful.     

Synthesis and reactivity of early-late heterobimetallic complexes displaying a η-tantalum-alkylidene to palladium interaction

Tantalaalkylidene compounds, CHR=TaCl₃L₂ (R=^tBu or CMe₂Ph, L=THF or 1/2dimethoxyethane) mixed with the cyclopalladated dimer [Pd(2-C₆H₄CH₂NMe₂)(μ-Cl)]₂, 1, afford good yields of heterodimetallic complexes [Pd(2-C₆H₄CH₂NMe₂)(μ-Cl)(μ-CHR=TaCl₃L], 3a, 3b, in which the Ta=C unit is η²-interacting with the palladium atom, while a chloride ligand is bridging the tantalum and the palladium atoms. These compounds are fairly stable in air in the solid state and also in solution at RT. The interaction of the Ta=C unit with Pd in these bimetallic compounds is weak as shown by the ready formation of [Pd(2-C₆H₄CH₂NMe₂)PyCl] and CHR=TaCl₃Py₂ upon treatement with pyridine. Compounds analogous to 3a, b can also be obtained with 12 electrons tantalum complexes. Thus treating the same cyclopalladated dimer 1 with CHR=Ta(OAr)₃ (OAr=2,6-diisopropylphenyloxy) led to a much more stable though electron deficient species: [Pd(2-C₆H₄CH₂NMe₂)(μ-Cl)(μ-CH^tBu=Ta(OAr)₃], 3c. Substitution in 3a of one chloride ion by an alkyl group occurred at the tantalum metal via reaction with ZnR₂ (R=---CH₂CMe₂Ph) leading to [Pd(2-C₆H₄CH₂NMe₂)(μ-Cl)(μ-CH^tBu=TaCl₃(CH₂CMe₂Ph)], 4 for which there is no free rotation around the new Ta---C bond and in which one of the methylene protons is strongly interacting with the palladium centre. This compound is believed to mimic an intermediate to the formation of tantalacarbyne derivative, which was obtained earlier via reaction of the uncomplexed tantalacarbene compound with dialkylzinc compounds.     

Chelated alkyl halide manganese complexes (η:η-C5H4CH2CH2X)Mn(CO)2 from photolysis of (η-C5H4CH2CH2X)Mn(CO)3

Manganese tricarbonyl complexes (η⁵-C₅H₄CH₂CH₂Br)Mn(CO)₃ (3) and (η⁵-C₅H₄CH₂CH₂I)Mn(CO)₃ (4), with an alkyl halide side chain attached to the cyclopentadienyl ligand, were synthesized as possible precursors to chelated alkyl halide manganese complexes. Photolysis of 3 or 4 in toluene, hexane or acetone-d₆ resulted in CO dissociation and intramolecular coordination of the alkyl halide to manganese to produce (η⁵:η¹-C₅H₄CH₂CH₂Br)Mn(CO)₂ (5) and (η⁵:η¹-C₅H₄CH₂CH₂I)Mn(CO)₂ (6). Low temperature NMR and IR spectroscopy established the structures of 5 and 6. Photolysis of 3 in a glass matrix at 91 K demonstrated CO release from manganese. Low temperature NMR spectroscopy established that the coordinated alkyl halide complexes are stable to approximately −20°C.     

The structure of (η-C6H5Cl)Cr(CO)2PPh3

In a synthetic route that varies from the standard procedure requiring irradiation, the (η⁶-C₆H₅Cl)Cr(CO)₂PPh₃ complex is obtained upon reacting (η⁶-C₆H₅Cl)Cr(CO)₃ with tetrakis(triphenylphosphine)palladium(0), CuI, and trimethylsilylphenylacetylene in triethylamine. The X-ray crystal structure of the yellow–orange crystals of (η⁶-C₆H₅Cl)Cr(CO)₂PPh₃ allows structural comparisons to related (arene)Cr(CO)₂PR₃ complexes.     

Gold in organic synthesis Part 2. Preparation of benzyl-alkyl and-arylketones via C---C coupling

Reaction of [Au(η²-Ar){CH₂C(O)R}Cl] (Ar=C₆H₄N=N- Ph-₂, R=Me, C₆H₂(OMe)₃-3′,4′,5′; Ar=C₆H₃(N=NC₆H₄Me- 4′)-2, Me-5, R=Me) with PPh₃ and NaClO₄·H₂O (1:2:1) at room temperature, leads to reductive elimination giving [Au(PPh₃)₂]ClO₄ and the corresponding carbon-carbon coupling product ArCH₂C(O)R. A similar process takes place when complexes [Au(η²-Ar){CH₂C(O)R}(PPh₃)Cl] are refluxed in tetrahydrofuran, through elimination of [Au(PPh₃)Cl].     

Studies on the reactivity of organometallic Ru-, Rh- and Os-pta complexes with DNA model compounds

The reactions of arene–metal complexes (arene = p-cymene, benzene or pentamethylcyclopentadienyl, metal = Ru, Rh or Os), including 1,3,5-triaza-7-phosphatricyclo-[3.3.1.1]decanephosphine (pta) and chloro co-ligands, with 9-methylguanine, adenine, and a series of nucleosides were studied in water to ascertain the binding modes. The products were characterized by NMR spectroscopy and electrospray ionization mass spectrometry (ESI-MS). Tandem mass spectrometry was found to provide excellent information on preferential binding sites. In general, the N7 position on guanine (the most basic site) was found to be the preferred donor atom for coordination to the metal complexes. The X-ray structures of the precursor complexes, [(η⁵-C₁₀H₁₅)RhCl(pta-Me)₂]Cl₂, [(η⁶-C₁₀H₁₄)OsCl(pta)₂]Cl, and [(η⁶-C₆H₆)OsCl₂(CH₃CN)], are also reported.     

Olefin versus sulfur coordination of benzo[b]thiophene (BT) in Cp(CO)2Re(η:η-μ2-BT)Cr(CO)3

Reactions of Cr(CO)₃(η⁶-BT), in which the Cr is π-coordinated to the benzene ring of benzo[b]thiophene (BT), with Cp′(CO)₂Re(THF), where Cp′ = η⁵-C₅H₅ or η⁵-C₅Me₅, give the products Cp′(CO)₂Re(η²:η⁶-μ₂-BT)Cr(CO)₃ in which the Cr remains coordinated to the benzene ring and Re is bound to the C(2)=C(3) double bond. An X-ray diffraction study of Cp(CO)₂Re(η²:η⁶-μ₂-BT)Cr(CO)₃ (3) provides details of the geometry. This structure contrasts with that of the Cp′(CO)₂Re(BT) complexes that exist as mixtures of isomers in which the BT is coordinated to the Re through either the double bond (2,3-η²) or the sulfur (η¹(S)). Thus, the electron-withdrawing Cr(CO)₃ group in 3 stabilizes the 2,3-η² mode of BT coordination to the Cp′(CO)₂Re fragment. Implications of these results for catalytic hydrodesulfurization of BT are discussed. Crystal data for 3: triclinic, space group

Full-size image

.     

Reactivity, variable temperature solution H NMR studies and MO calculations of dimolybdenum allenylidene complexes of the type [(η-C5H5)2Mo2(CO)4(μ,η(4e)-C=C=CR1R2)]

The reactivity, towards nucleophiles and electrophiles, of dimolybdenum allenylidene complexes of the type [Cp₂Mo₂(CO)₄(μ,η²(4e)-C=C=CR1R2)] (Cp=η⁵-C₅H₅) has been investigated. The nucleophilic attacks occur at the C_γ carbon atom, while electrophiles affec the C atom. Variable temperature solution ¹H NMR studies show a dynamic behavior of these complexes consisting of an equilibrium between two enantiomers with a symmetrical [Cp₂Mo₂(CO)₄(μ-σ,σ(2e)-C=C=CR1R2)] transition state. Extended Hückel MO calculations have been carried out on the model [Cp₂Mo₂(CO)₄(μ,η²-C=C=CH₂]. The calculated charges of the allenylidene carbon atoms suggest that the electrophilic attacks are under charge control, while the nucleophilic attacks are rather under orbital control.     

Reactivity study of cyclopentadienyl osmium(II) bisphosphine azido complexes with activated alkynes and nitriles: Isolation of osmium triazolato and tetrazolato complexes by 1,3-dipolar addition

The cyclopentadienyl osmium(II) complexes [(η⁵-C₅H₅)Os(PPh₃)₂X] [X = Br (1), CH₃CN (2)] reacts with sodium azide (NaN₃) to yield the corresponding azido complex [(η⁵-C₅H₅)Os(PPh₃)₂N₃] (3). This undergoes [3+2] dipolar cycloaddition reaction with activated alkynes like dimethyl and diethyl acetylenedicarboxylate to yield triazolato complexes [(η⁵-C₅H₅)Os(PPh₃)₂{N₃C₂(CO₂R)₂}] [R = –CH₂CH₃ (4) and –CH₃ (5)]. The complex 3 also reacts with nitriles such as tetracyanoethylene (TCE), fumaronitrile and p-nitrobenzonitrile to yield complexes of the type [(η⁵-C₅H₅)Os(PPh₃)₂{N₄C₂(CN)C(CN)₂}] (6), [(η⁵-C₅H₅)Os(PPh₃)₂{N₃C₂HCN}] (7) and [(η⁵-C₅H₅)Os(PPh₃)₂{N₄C(C₆H₄–p-NO₂)}] (8). These complexes were fully characterized on the basis of microanalyses, FT-IR and NMR spectroscopic data. The molecular structure of the representative complex [(η⁵-C₅H₅)Os(PPh₃)₂{N₃C₂(CO₂CH₂CH₃)₂}] (4) was determined by single crystal X-ray analysis.     

Chiroptical properties of heterotrimetallic ‘wing-tip’ butterflies; synthesis and crystal structure of (μ-H)Ru2Fe2PdC(CO)12 (η-ß-C10H15)

HRu₂Fe₂PdC(CO)₁₂ (η³-ß-C₁₀H₁₅) cluster was prepared in the reaction of (Et₄N) [HFe₂Ru₂C(CO)₁₂] with [Pd(η³-ß-C₁₀H₁₅)Cl]₂. X-ray structural study of HRu₂Fe₂PdC(CO)₁₂ (η³-ß-C₁₀H₁₅) (where ß-C₁₀H₁₅ is ß-pinenyl) revealed a wing-tip butterfly geometry of the metal core and (1R, 2S, 3S, 5R) absolute configuration for both crystallography independent molecules in the crystal. Chiroptical properties of this cluster are compared with other clusters containing a Pd(η³-ß-C₁₀H₁₅) fragment and discussed.     

Heterobimetallic chloro bridgedcomplexes of (η:η−C10H16)-ruthenium(IV) with palladium(II), platinum(II), rhodium(III), iridium(III), copper(I) and rhodium(I)

Metathesis of [(η³:η³−C₁₀H₁₆)Ru(Cl) (μ−Cl)]₂ (1) with [R₃P) (Cl)M(μ-Cl)]₂ (M = Pd, Pt), [Me₂NCH₂C₆H₄Pd(μ-Cl)]₂ and [(OC)₂Rh(μ-Cl)]₂ affords the heterobimetallic chloro bridged complexes (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂M(PR₃)(Cl) (M = Pd, Pt), (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂PdC₆H₄CH₂NMe₂ and (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂Rh(CO)₂, respectively. Complex 1 reacts with [Cp^*M(Cl) (μ-Cl)]₂ (M = Rh, Ir), [p-cymene Ru(Cl) (μ-Cl]₂ and [(Cy₃P)Cu(μ-Cl)]₂ to give an equilibrium of the heterobimetallic complexes and of educts. The structures of (η³:η³-C₁₀H₁₆)Ru(μ-Cl)₂Pd(PR₃) (Cl) (R = Et, Bu) and of one diastereoisomer of (η³:η³-C₁₀H₁₆)Ru(μ-Cl)₂IrCp^*(Cl) were determined by X-ray diffraction.     

Investigation of the dithiocarbamate-induced coupling of allylidene and carbonyl ligands on a tungsten center

Reaction of the allylidene tungsten complex [W(CPhCHCHMe)Br₂(CO)₂(4-picoline)] (1) with the dithiocarbamates MS₂CNR₂ (a: M=Na, R=Et; b: M=Na, R=Me; c: M=Li, R=Ph) in THF at 50 °C affords the vinylketene tungsten complexes [W(S₂CNR₂)₂(OCCPhCHCHMe)(CO)] (2a–c). At lower temperatures, four reaction intermediates (3–6) may be discerned. Spectroscopic studies indicate that these compounds contain η⁴-allyldithiocarbamate ligands which are generated by addition of dithiocarbamate across the metal-carbon double bond of the allylidene-tungsten unit in 1. The structures of [W(S₂CNEt₂)₂(OCCPhCHCHMe)(CO)] (2a) and of one intermediate, [W(η⁴-Et₂NCS₂CPhCHCHMe)(S₂CNEt₂)(CO)₂] (5a) were elucidated by X-ray crystallography.