Effects of annealing on gelatinization and microstructures of corn starches with different amylose/amylopectin ratios

Corn starches with different amylose/amylopectin ratios (waxy 0/100, normal corn 23/77, Gelose 50 50/50, Gelose 80 80/20) were annealed at below their gelatinization temperatures in excess water. The effects of annealing on the gelatinization and microstructures of the starches were studied using DSC, XRD and a microscope equipped with both normal and polarized light. In addition, a high-pressure DSC pan was used to study the effects of high-temperature annealing on the multiphase transitions of starches with different water contents. The granular size of the starches increased after the annealing process, but the size variation rates were different, with higher amylopectin contents resulting in a higher diameter growth rates and final accretion ratios. DSC results showed that annealing increased the gelatinization enthalpy of the amylose-rich starches. The increased enthalpy was mainly attributed to endotherm G – there were no significant changes to endotherms M1, M2 or Z – indicating that annealing mainly affected the helical length of shorter or sub-optional amylopectins, in particular the amylopectin in amylose-rich starches. The XRD traces of all starches after annealing remained unchanged.     

Effects of structural imperfection on gelatinization characteristics of amylopectin starches with A- and B-type crystallinity

The aim of the present work was to investigate the effect of physical structures on the properties of starch granules. Starches with a high amylopectin content possessing A- and B-type crystallinity were chosen for the study. The gelatinization temperature decreased in the following order: maize (A) > potato (B) > wheat (A) > barley (A), which did not reflect a correlation with the type of crystallinity. Low values of gelatinization temperature were accompanied with high free surface energy of the crystallites. It is proposed that these data are caused by different types of imperfections in starch crystals. Annealing resulted in an enhancement of the gelatinization temperature and a decrease of the free surface energy of the crystallites for all starches reflecting a partial improvement of crystalline perfection. A limited acid hydrolysis (lintnerization) of the starches decreased the gelatinization temperature because of a partial disruption of the crystalline lamellae and an increase of the amount of defects on the edges of the crystallites. Annealing of the lintnerized starches improved the structure of maize and potato starch, giving them similar structural and physicochemical parameters, which was opposite the behavior of the annealed sample from wheat. The possible nature of removable and nonremovable defects inside the crystalline region of the starch granules is discussed. It is concluded that, besides the allomorphic A- and B-types of crystal packing, physical defects in the crystals possess a major impact on starch gelatinization.     

The roles of amylose and amylopectin in the gelation and retrogradation of starch

The retrogradation of starch gels has been studied by using X-ray diffraction, differential scanning calorimetry, and measurements of the shear modulus. Starch gels were considered as composites containing gelatinised granules embedded in an amylose matrix. The short-term development of gel structure and crystallinity in starch gels was found to be dominated by irreversible (T <100°) gelation and crystallisation within the amylose matrix. Long-term increases in the modulus of starch gels were linked to a reversible crystallisation, involving amylopectin, within the granules on storage. It was considered that the crystallisation resulted in an increase in the rigidity of the granules and thus enhanced their reinforcement of the amylose matrix.     

Carbon isotope ratios of amylose,amylopectin and mutant starches

Carbon isotope ratios (expressed as δ¹³C values) were determined for various sources of starch and the starch fractions amylose and amylopectin. The δ¹³C values of amylose were consistently less negative, 0.4–2.3 ‰, than those of amylopectin in kernal starch from maize (Zea mays) and barley (Hordeum vulgare) and in tuber starch from potato (Solanum tuberosum). Kernel starch isolated from the maize mutants wx1 and ae1, with known genetic lesions in the starch biosynthetic pathway, also showed significant differences in δ¹³C values. Collectively, these results suggest that variation in carbon isotope ratios in the amylose and amylopectin components of starch may be attributed to isotopic discrimination by the enzymes involved in starch biosynthesis.     

Structural and thermodynamic properties of rice starches with different genetic background Part 1. Differentiation of amylopectin and amylose defects

A combined DSC - HPAEC-PAD approach, gel permeation chromatography and mild long-term acidic hydrolysis were employed to study the effects of amylopectin chain-length distributional and amylose defects on the assembly structures of amylopectin (crystalline lamellae, amylopectin clusters) in A-type polymorphic starches extracted from 11 Thai cultivars of rice with different amylose level. Joint analysis of the data allowed determining the contributions of different populations of amylopectin chains to the thermodynamic melting parameters of crystalline lamellae. It was shown that amylopectin chains with DP 6-12 and 25or=37 could be related to chains stabilizing these structures. The total effect of amylose and amylopectin defects can be described by means of Thomson-Gibbs' equation. The increase of defects in the assembly structures is accompanied by rise of the rates of acidic hydrolysis of both amorphous and crystalline parts in starches.     

Effects of an added inclusion-amylose complex on the retrogradation of some starches and amylopectin

The effects of added cetyltrimethylammonium bromide (CTAB)-amylose complex on retrogradation of some starches (waxy-maize, maize, and potato starch) and on amylopectin from potato have been studied by differential scanning calorimetry (DSC). The starches and amylopectin samples with added CTAB-amylose complex received four different heat treatments prior to storage and DSC measurements that either melted the complex or left the complex intact. The calorimetry measurements showed that intact CTAB-amylose complex had much less effect on decreasing the retrogradation of the starches and the amylopectin than samples with melted complex prior to measurements. This is discussed in relation to possible complex formation of amylopectin and lipids and the effects of adding uncomplexed lipids on the retrogradation of waxy starches and amylopectin.     

Structural parameters of amylopectin clusters and semi-crystalline growth rings in wheat starches with different amylose content

Small-angle X-ray scattering (SAXS) and scanning electron microscopy (SEM) were used to investigate the internal structure of wheat starch granules with different amylose content. Different approaches were used for treatment (interpretation) of SAXS data to assess the values of structural parameters of amylopectin clusters and the size of crystalline and amorphous lamella in different wheat starches. The average values of the semi-crystalline growth rings thickness in starches have been determined and the relationship between structural characteristics and thermodynamic melting parameters is discussed.     

Distribution of methyl substituents in amylose and amylopectin from methylated potato starches

Granular potato starches were methylated in aqueous suspension with dimethyl sulfate to molar substitution (MS) values up to 0.29. Fractions containing mainly amylose or amylopectin were obtained after aqueous leaching of the derivatised starch granules. Amylopectin in these fractions was precipitated with Concanavalin A to separate it from amylose. Amylose remained in solution and was enzymatically converted into D-glucose for quantification, thereby taking into account the decreased digestibility due to the presence of methyl substituents. It was found that the MS of amylose was 1.6-1.9 times higher than that of amylopectin in methylated starch granules. The distributions of methyl substituents in trimers and tetramers, prepared from amylose- or amylopectin-enriched fractions, were determined by FAB mass spectrometry and compared with the outcome of a statistically random distribution. It turned out that substituents in amylopectin were distributed heterogeneously, whereas substitution of amylose was almost random. The results are rationalised on the basis of an organised framework that is built up from amylopectin side chains. The crystalline lamellae are less accessible for substitution than amorphous branching points and amylose.     

The effects of amylose content on the molecular size of amylose, and on the distribution of amylopectin chain length in maize starches

The amylose to amylopectin ratios in six maize starch samples of differing amylose contents were measured by enzymatic debranching, followed by high performance size exclusion chromatography (HPSEC). The molecular size of amyloses, estimated by -log K_wav, shows progressive decrease with the increase in amylose content in maize starches. The gel permeation chromatographs of the corresponding amylopectins, debranched with isoamylase, showed bimodal distributions containing long and short chains. The average chain length of amylopectin has a correlation with amylose content. The correlation coefficients between amylose content and average chain length, long chain length, weight ratio and the mole ratio of long and short chain length, were 0.97, 0.92, 0.96, 0.94 respectively. The maize starch with the highest amylose content has the lowest amylose molecular size and the longest chains, with a high ratio of long to short chains in its amylopectin fraction. Comparing the values of amylose content determined by HPSEC of starch or debranched starch with those of the iodinecomplex method, we conclude that long chains of amylopectin in high amylose starches contribute significantly to apparent amylose content.     

Structural characteristics and physicochemical properties of oxidized corn starches varying in amylose content

The effects of amylose content on the extent of oxidation and the distribution of carboxyl groups in hypochlorite-oxidized corn starches were investigated. Corn starches including waxy corn starch (WC), common corn starch (CC), and 50% and 70% high-amylose corn starches (AMC) were oxidized with NaOCl at three concentrations (0.8%, 2%, and 5%). Carboxyl and carbonyl content of oxidized starches increased with increasing NaOCl concentration. High-AMC (70%) had slightly higher carboxyl and carbonyl contents at 0.8% NaOCl, whereas WC had significantly higher carboxyl and carbonyl contents at 2% and 5% NaOCl levels. Carbohydrate profiles by high-performance size-exclusion chromatography indicate that amylose was more susceptible to depolymerization than amylopectin. Degradation of amylopectin long chains (DP >24) was more pronounced in WC and CC than in AMCs. The crystalline lamellae of WC started to degrade at 2% NaOCl, but those of the other corn starches remained intact even at 5% NaOCl level according to X-ray crystallinity. By using anion-exchange chromatography for separation and size-exclusion chromatography for characterization, carboxyl groups were found to be more concentrated on amylopectin than on amylose, particularly in AMCs. Oxidation decreased gelatinization temperature and enthalpy with WC showing the most decrease and 70% AMC showing the least. The gelatinization enthalpy of 50% AMC decreased significantly faster than those of CC and 70% AMC after 0.8% oxidation. Retrogradation of amylopectin slightly increased after oxidation with increasing oxidation level. The peak viscosities of oxidized WC and CC were higher than those of their native counterparts at 0.8% NaOCl, but this increase was not observed in AMCs. The setback viscosities of 2% NaOCl-oxidized 50% and 70% AMCs were much higher than those of the unmodified counterparts. The extent of oxidation and physicochemical properties of oxidized starches varied greatly with the amylase:amylopectin ratio of corn starches. Amylose was suggested to play an important role in controlling the oxidation efficiency.     

Comparison of potato amylopectin starches and potato starches — influence of year and variety

Starches from three potato varieties and their respective transformants producing amylopectin starch were studied over a period of 3 years. The gelatinisation, swelling and dispersion properties were studied using differential scanning calorimetry (DSC), X-ray diffraction, swelling capacity measurements and a Brabender Viscograph.

The potato amylopectin starches (PAP) exhibited higher endothermic temperatures as well as higher enthalpies than the normal potato starches (NPS). PAP samples gave rise to an exceptionally sharp viscosity peak during gelatinisation and a relatively low increase in viscosity on cooling. Swelling capacity measurements showed that PAP granules swelled more rapidly, and that the dispersion of the swollen granules occurred at a lower temperature (85°C). Analysis of variance (ANOVA) also revealed that the year influenced the DSC results, and that both year and variety affect some of the Brabender parameters. Furthermore, the PAP and NPS samples were subjected to heat–moisture treatment at three different moisture levels, and the Brabender viscosity properties were studied.     

Some recent observations on the retrogradation of amylose

Starch is the major storage polysaccharide of higher plants where it occurs as water insoluble granules. Two component polymers may be extracted from the starch granules, namely amylose and amylopectin. Both polymers are based on chains on α-1,4-linked d-glucose. However, whereas amylose is an essentially linear polymer, amylopectin is highly branched with branches linked at the 6-position.     

Measurement of resistant starch content in cooked rice and analysis of gelatinization and retrogradation characteristics

Digestion-resistant starch (RS) has many physiologic functions. The RS content is measured by enzymatically degrading flour samples according to the method of the Association of Official Analytical Chemists. Experiments have been performed with wheat, corn, and other grains, but there are no data for cooked rice grains in the form ingested by humans. Thus, we investigated a method to measure RS that is suitable for cooked rice grains using rice cultivars that are reported to differentially increase postprandial blood glucose in humans. Using a method for cooking individual rice grains and optimized enzyme reaction conditions, we established an RS measurement method. We also found that the amylopectin crystal condition affects the RS content measured using our method.     

Effect of annealing and pressure on microstructure of cornstarches with different amylose/amylopectin ratios

This work focuses on the effect of annealing and pressure on microstructures of starch, in particular the crystal structure and crystallinity to further explore the mechanisms of annealing and pressure treatment. Cornstarches with different amylose/amylopectin ratios were used as model materials. Since the samples covered both A-type (high amylopectin starch: waxy and maize) and B-type (high amylose starch: G50 and G80) crystals, the results can be used to clarify some previous confusion. The effect of annealing and pressure on the crystallinity and double helices were investigated by X-ray diffraction (XRD) and ¹³C CP/MAS NMR spectroscopy. The crystal form of various starches remained unchanged after annealing and pressure treatment. XRD detection showed that the relative crystallinity (RC) of high amylopectin starches was increased slightly after annealing, while the RC of high amylose-rich starches remained unchanged. NMR measurement supported the XRD results. The increase can be explained by the chain relaxation. XRD results also indicated that some of the fixed region in crystallinity was susceptible to outside forces. The effect of annealing and pressure on starch gelatinization temperature and enthalpy are used to explore the mechanisms.     

Temperature effect on retrogradation rate and crystalline structure of amylose

Commercial potato amylose was used to study temperature effects on the retrogradation of amylose solutions (3.5mg/ml). The retrogradation rate decreased as incubation temperature increased (5 to 45 °C). The degree of retrogradation within 24 h decreased from 58.8 to 7.1% as incubation temperature increased from 5 to 45 °C. In the amylose solution, different-sized molecular subfractions retrograded at different rates. After incubating at 5 °C for 100 days, the majority of the amylose molecules retrograded and precipitated from the solution; at 45 °C, only amylose of the small-molecular subfraction (number average, DP_n = 110; weight average, DP_w = 150) retrograded and precipitated. Entanglement of molecules was observed in size exclusion chromatograms. The morphology of retrograded amylose observed by using a scanning electron microscope differed with the retrogradation temperature. The chain length of amylose crystalline segments, prepared by hydrolysis of retrograded amylose, showed a narrow distribution (polydispersity from 1.21 to 1.67). The chain lengths of resistant segments increased DP_n from 39 to 52 and DP_w from 47 to 72 for α-amylolysis and DP_n from 34 to 40 and DP_w from 48 to 67 for 16% sulfuric acid hydrolysis, when incubation temperature increased from 5 to 45 °C.     

Effect of glycerol on behaviour of amylose and amylopectin films

The effect of water and glycerol on sorption and calorimetric T_gs of amylose and amylopectin films were examined. The mechanical properties of the films were also analysed under varying glycerol content at constant RH and temperature. Based on changes observed in sorption and tensile failure behaviour glycerol was strongly interacted with both starch polymers. Even though water was observed to be more efficient plasticiser than glycerol, glycerol also affected the T_g. But in spite of the observed decrease in T_g under low glycerol contents brittleness of the films increased based on changes in elongation. The increase in brittleness of both polymers was also in agreement with their actual behaviour. At around 20% glycerol great change in the rheological properties occurred. Above 20% glycerol amylose film showed much larger elongation than the low glycerol content films and was still strong but the amylopectin produced a very week and non-flexible film.     

Estimation and fractionation of the essentially unbranched (amylose) and branched (amylopectin) components of starches with concanavalin A

Conditions have been devised for the quantitative precipitation of the branched fraction in starches by concanavalin A and the enzymic estimation of the - -glucan in this and the soluble components. For some starches, such as those from cereal and high-amylose pea seeds, the percentage of branched fraction determined by this procedure was higher than that calculated by deducting from one hundred the apparent amylose content as measured by potentiometric iodine titration, suggesting a method for estimating the content of material having an atypical structure in the whole starch. The procedure has been adapted to provide a preparative method of separating amylose and amylopectin fractions. It efficiently separated these in starches that cannot be fully fractionated by complexing with 1-butanol, such as those from high-amylose pea seeds and tobacco leaves.