Distribution and characterization of plasmid-related sequences in the chromosomal DNA of different thermophilic Methanobacterium strains

The genomes of several thermophilic members of the genus Methanobacterium were analyzed for homology to the related restriction-modification plasmids pFVI and pFZ1 from M. thermoformicicum strains THF and Z-245, respectively. Two plasmid regions, designated FR-I and FR-II, could be identified with chromosomal counterparts in six Methanobacterium strains. Multiple copies of the pFVI-specific element FR-I were detected in the M. thermoformicicum strains CSM3, FF1, FF3 and M. thermoautotrophicum H. Sequence analysis showed that one FR-I element had been integrated in almost identical sequence contexts into the chromosomes of the strains CSM3 and AH. Comparison of the FR-I elements from these strains with that from pFVI revealed that they consisted of two subfragments, boxI (1118 bp) and boxII (383 bp), the order of which is variable. Each subfragment was identical on the sequence level with the corresponding plasmid-borne element and was flanked by terminal direct repeats with the consensus sequence A(A/T)ATTT. These results suggest that FR-I represents a mobile element. FR-II was located on both plasmids pFVI and pFZI, and on the chromosome of M. thermoformicicum strains THF, CSM3 and HN4. Comparison of the nucleotide sequences of the two plasmid FR-II copies and that from the chromosome of strain CSM3 showed that the FR-II segments were approximately 2.5–3.0 kb in size and contained large open reading frames (ORFs) that may encode highly related proteins with an as yet unknown function.     

A new insertion sequence from Sinorhizobium meliloti with homology to IS1357 from Methylobacterium sp. and IS1452 from Acetobacter pasteurianus

The insertion sequence ISRm8 was identified by sequence analysis of the cryptic plasmid pRmeGR4b of Sinorhizobium meliloti GR4. ISRm8 is 1451 bp in length and carries 22/24-bp terminal imperfect inverted repeats with seven mismatches and a direct target site duplication of 3 bp. ISRm8 carries a unique open reading frame whose putative protein showed significant similarity to the insertion sequences IS1357 and IS1452, isolated from Methylobacterium sp. and Acetobacter pasteurianus, respectively. Two copies of this IS element were found in strain GR4; one of them is linked to plasmid pRmeGR4b, whereas the other is localized out of the non-pSym plasmids. In S. meliloti field populations ISRm8 shows a limited distribution (50% of the strains tested carry the IS element), with a copy number ranging from 1 to 6.     

Apparent Involvement of a Plasmid in Phaseotoxin Production by Pseudomonas phaseolicola

Three naturally occurring toxigenic strains (HB-36, G-50, and HB-33), one nontoxigenic strain (HB-20), and one ultraviolet light-induced toxinless mutant (G-50 Tox⁻) of Pseudomonas phaseolicola were examined by dye-buoyant density equilibrium centrifugation for the presence of plasmid deoxyribonucleic acid. All strains contained plasmid deoxyribonucleic acid. Comparison of the plasmid deoxyribonucleic acid of different strains by agarose gel electrophoresis showed that strain G-50 harbored three plasmids, whereas the rest of the strains contained two plasmids each. Irrespective of their toxigenicity, all strains shared the large-sized first plasmid band, but differed with respect to other plasmids. Restriction endonuclease analyses of the plasmids indicated that a 22.50-megadalton plasmid was common to two of the toxigenic strains (HB-36 and G-50). However, strain HB-33, which is also toxigenic, contained a much smaller plasmid (4.23 megadaltons). It is hypothesized that this small plasmid may have arisen by a recombination event from a larger plasmid.     

Transposon-like structure of a new plasmid-encoded restriction-modification system in Rhizobium leguminosarum VF39SM

Total DNA isolated from Rhizobium leguminosarum VF39SM cells is resistant to cleavage by the restriction endonuclease PstI. Plasmid curing and transfer studies localized this phenotype to pRleVF39b, the second smallest of six plasmids found in this bacterium. In vitro selection for vector modification was employed to isolate a presumptive methylase gene (M.Rle39BI) from a plasmid gene library. Total and plasmid DNAs isolated from E. coli containing M.RleBI were resistant to digestion by PstI. Sequence data suggested that a putative restriction endonuclease (R.Rle39BI) was also encoded on the same fragment. The two genes were flanked by identical copies of a putative insertion sequence, which was also present in several copies elsewhere in the VF39SM genome. The presence of this element in other strains examined suggested that this element is indeed an insertion sequence. The differences in G/C content between the DNA coding for the R/M system and that of the IS element suggest that this DNA region may have been acquired by horizontal transfer. Received: 28 January 1997 / Accepted: 3 June 1997     

Genetic organization and conjugal plasmid DNA transfer of pHP69, a plasmid from a Korean isolate of Helicobacter pylori

We isolated pHP69, a 9,153 bp plasmid from Helicobacter pylori with a 33.98% (G+C) content. We identified 11 open reading frames (ORFs), including replication initiation protein A (repA), fic (cAMP-induced filamentation protein), mccC, mccB, mobA, mobD, mobB, and mobC, as well as four 22 bp tandem repeat sequences. The nucleic acid and predicted amino acid sequences of these ORFs exhibited significant homology to those of other H. pylori plasmids. pHP69 repA encodes a replication initiation protein and its amino acid sequence is similar to those of replicase proteins from theta-type plasmids. pHP69 contains two types of repeat sequences (R1 and R2), a MOBHEN family mobilization region comprising mobC, mobA, mobB, and mobD, and genes encoding microcin B and C. Among the 36 H. pylori strains containing plasmids, mobA or mccBC are present in 12 or 6, respectively and 3 contain both genes. To examine intrinsic capability of H. pylori for conjugative plasmid transfer, a shuttle vector pBHP69KH containing pHP69 and replication origin of pBR322 was constructed. It was shown that this vector could stably replicate and be mobilized among clinical H. pylori strains and demonstrated to gene transfer by natural plasmid.     

Transposon-like structure of a new plasmid-encoded restriction-modification system in Rhizobium leguminosarum VF39SM

Total DNA isolated from Rhizobium leguminosarum VF39SM cells is resistant to cleavage by the restriction endonuclease PstI. Plasmid curing and transfer studies localized this phenotype to pRleVF39b, the second smallest of six plasmids found in this bacterium. In vitro selection for vector modification was employed to isolate a presumptive methylase gene (M.Rle39BI) from a plasmid gene library. Total and plasmid DNAs isolated from E. coli containing M.RleBI were resistant to digestion by PstI. Sequence data suggested that a putative restriction endonuclease (R.Rle39BI) was also encoded on the same fragment. The two genes were flanked by identical copies of a putative insertion sequence, which was also present in several copies elsewhere in the VF39SM genome. The presence of this element in other strains examined suggested that this element is indeed an insertion sequence. The differences in G/C content between the DNA coding for the R/M system and that of the IS element suggest that this DNA region may have been acquired by horizontal transfer.     

Nucleotide Sequences, Genetic Organization, and Distribution of pEU30 and pEL60 from Erwinia amylovora

The nucleotide sequences, genetic organization, and distribution of plasmids pEU30 (30,314 bp) and pEL60 (60,145 bp) from the plant pathogen Erwinia amylovora are described. The newly characterized pEU30 and pEL60 plasmids inhabited strains isolated in the western United States and Lebanon, respectively. The gene content of pEU30 resembled plasmids found in plant-associated bacteria, while that of pEL60 was most similar to IncL/M plasmids inhabiting enteric bacteria.     

The yeast plasmid 2μ circle encodes components required for its high copy propagation

The yeast plasmid 2μ and certain hybrid plasmids constructed from it are maintained stably and at high copy number in yeast cells. By examining various mutant hybrid 2μ plasmids, we show that these properties require the integrity of four plasmid loci. Two of these, designated REPI and REP2, are active in trans and correspond to two open coding regions of 2μ. The other two loci are active only in cis and correspond to the origin of replication and to a region, designated REP3, located several hundred bp away from the origin and consisting of direct repeats of a 62 bp sequence. We propose that the REP loci constitute a copy control system that overrides normal cellular restriction on plasmid replication and amplifies the plasmid when copy number is low.     

Plasmid pHH1 of Halobacterium salinarium: characterization of the replicon region,the gas vesicle gene cluster and insertion elements

The DNA sequence of the 5.7 kb plasmid pHH9 containing the replicon region of the 150 kb plasmid pHH1 from Halobacterium salinarium was determined. The minimal region necessary for stable plasmid maintenance lies within a 2.9 kb fragment, as defined by transformation experiments. The DNA sequence contained two open reading frames arranged in opposite orientations, separated by an unusually high AT-rich (60–70% A + T) sequence of 350 bp. All H. salinarium strains (H. halobium, H. cutirubrum) investigated harbour endogenous plasmids containing the pHH1 replicon; however, these pHH1-type plasmids differ by insertions and deletions. Adjacent to the replicon, and separated by a copy of each of the insertion elements ISH27 and ISH26, is the 9 kb p-vac region required for gas vesicle synthesis. Analysis of these and other ISH element copies in pHH1 revealed that most of them lack the target DNA duplication usually found with recently transposed ISH elements. These results underline the plasticity of plasmid pHH1.     

Construction and application of R prime plasmids, carrying different segments of an octopine Ti plasmid from Agrobacterium tumefaciens, for complementation of vir genes

Several R prime plasmids have been obtained with high efficiency, by enclosing the R plasmid replicator, in an R::Ti cointegrate plasmid, between two copies of the transposon Tn1831, in the same orientation. These R primes carry different segments of an octopine Ti plasmid, and are compatible with Ti plasmids. They were used to study genetic complementation of Ti plasmid insertion mutants, outside the T-DNA region, which affected oncogenicity. Complementation was observed in both recombination-proficient and -deficient strains. The complementation in trans indicates that certain functions essential for tumor formation outside the T-DNA region are probably expressed in the bacterium. Therefore, the authors proposed to make a distinction between virulence (Vir) functions and oncogenic (Onc) functions of the octopine Ti plasmid of Agrobacterium tumefaciens. A large R prime was obtained, carrying the whole Ti plasmid, except a 7-Mdalton segment, containing the Ti plasmid replicator region. Strains harboring this plasmid induced normal tumors, showing that the replicator region of the octopine Ti plasmid is dispensible for tumor induction.     

Structural and Functional Characterization of IS1358 from Vibrio cholerae

The new epidemic serovar O139 of Vibrio cholerae has emerged from the pandemic serovar O1 biotype El Tor through the replacement of a 22-kbp DNA region by a 40-kbp O139-specific DNA fragment. This O139-specific DNA fragment contains an insertion sequence that was described previously (U. H. Stroeher, K. E. Jedani, B. K. Dredge, R. Morona, M. H. Brown, L. E. Karageorgos, J. M. Albert, and P. A. Manning, Proc. Natl. Acad. Sci. USA 92:10374–10378, 1995) and designated IS1358_O139. We studied the distribution of the IS1358 element in strains from various serovars by Southern analysis. Its presence was detected in strains from serovars O1, O2, O22, O139, and O155 but not in strains from serovars O15, O39, and O141. Furthermore, IS1358 was present in multiple copies in strains from serovars O2, O22, and O155. We cloned and sequenced four copies of IS1358 from V. cholerae O22 and one copy from V. cholerae O155. A comparison of their nucleotide sequences with those of O1 and O139 showed that they were almost identical. We constructed a transposon consisting of a kanamycin resistance gene flanked by two directly oriented copies of IS1358 to study the functionality of this element. Transposition of this element from a nonmobilizable plasmid onto the conjugative plasmid pOX38-Gen was detected in an Escherichia coli recA donor at a frequency of 1.2 × 10⁻⁸. Sequence analysis revealed that IS1358 duplicates 10 bp at its insertion site.     

The transposable element Tan1 of Aspergillus niger var. awamori,a new member of the Fot1 family

Aspergillus niger var. awamori has transposable elements that we refer to as Vader and Tan1 (transposon A. niger). Vader was identified by screening unstable nitrate reductase (niaD) mutants for insertions. Four of the isolated niaD mutants were shown to contain a small insertion element. This 437?bp insertion element, Vader, is flanked by 44?bp inverted repeats (IR) and is present in approximately 15 copies in the genomes of two A. niger strains examined. A synthetic 44?bp oligomer of the inverted repeat of Vader has now been used to clone, via the polymerase chain reaction, a 2.3?kb Tan1 element. The Tan1 element has also been isolated from a partial genomic library. Tan1 is present as a single copy in A. niger var. awamori. The Tan1 element has a unique organization: IR-ORF-IR-IR-Vader-IR. The single open reading frame (ORF) (1668?bp) encodes a putative transposase homologous to Fusarium oxysporum Fot1 and Magnaporthe grisea Pot2. Immediately 3′ to the second inverted repeat, which bounds the transposase, is a copy of the AT-rich Vader element. We hypothesize that at some stage the independent Vader element, although inactive by itself, arose from Tan1, resulting in current strains with only one copy of Tan1 providing transposase activity and numerous mobile copies of Vader dispersed in the genome.     

Sequencing and analysis of plasmids pAV1 and pAV2 ofAcinetobacter venetianus VE-C3 involved in diesel fuel degradation

Acinetobacter venetianus strain VE-C3 was isolated in the Venice lagoon (Italy) as a strain able to degrade diesel fuel oil. This strain possesses genes of the alkane monoxygenase complex responsible forn-alkane degradation and carries two plasmids, pAV1 (10820 bp) and pAV2 (15135 bp), which were supposed from the analysis of Alk mutant strains to harbour genetic determinants for hydrocarbon degradation. In this work we determined the nucleotide sequence of both plasmids and showed the presence of a putative aldehyde dehydrogenase gene, essential for hydrocarbon degradation, on plasmid pAV2, and of an ORF similar toalkL gene present on pAV1 plasmid. These data, combined with genetic reports indicating that strains lacking one of the two plasmids or carrying transposon insertion on pAV1, are defective inn-alkane degradation, suggest a complex genomic organisation of genes involved in alkane degradation inA. venetianus VE-C3. In this bacterium these genes are carried by both the chromosome and the plasmids, while inAcinetobacter sp. strain ADP1 and M1 all the genes for alkane monoxygenase complex are located only on the chromosome.     

Determination of plasmid copy number reveals the total plasmid DNA amount is greater than the chromosomal DNA amount in Bacillus thuringiensis YBT-1520

Bacillus thuringiensis is the most widely used bacterial bio-insecticide, and most insecticidal crystal protein-coding genes are located on plasmids. Most strains of B. thuringiensis harbor numerous diverse plasmids, although the plasmid copy numbers (PCNs) of all native plasmids in this host and the corresponding total plasmid DNA amount remains unknown. In this study, we determined the PCNs of 11 plasmids (ranging from 2 kb to 416 kb) in a sequenced B. thuringiensis subsp. kurstaki strain YBT-1520 using real-time qPCR. PCNs were found to range from 1.38 to 172, and were negatively correlated to plasmid size. The amount of total plasmid DNA (∼8.7 Mbp) was 1.62-fold greater than the amount of chromosomal DNA (∼5.4 Mbp) at the mid-exponential growth stage (OD₆₀₀ = 2.0) of the organism. Furthermore, we selected three plasmids with different sizes and replication mechanisms to determine the PCNs over the entire life cycle. We found that the PCNs dynamically shifted at different stages, reaching their maximum during the mid-exponential growth or stationary phases and remaining stable and close to their minimum after the prespore formation stage. The PCN of pBMB2062, which is the smallest plasmid (2062 bp) and has the highest PCN of those tested, varied in strain YBT-1520, HD-1, and HD-136 (172, 115, and 94, respectively). These findings provide insight into both the total plasmid DNA amount of B. thuringiensis and the strong ability of the species to harbor plasmids.     

A plasmid cloning vector for the direct selection of strains carrying recombinant plasmids

A plasmid cloning vector with ampicillin-resistance and streptomycin-sensitivity markers is suitable for the direct selection of strains carrying recombinant plasmids. The selection for plasmid transformants utilizes their ampicillin resistance whereas selection for recombinant plasmids is based on the inactivation of the rpsL gene contained on the plasmid. When streptomycin-resistant Escherichia coli strains are used as recipients in transformation, transformants carrying the parental plasmid are phenotypically sensitive to streptomycin while those carrying hybrid plasmids are resistant to streptomycin.     

Flipper, a mobile Fot1-like transposable element in Botrytis cinerea

A transposable element, Flipper, was isolated from the phytopathogenic fungus Botrytis cinerea. The element was identified as an insertion sequence within the coding region of the nitrate reductase gene. The Flipper sequence is 1842?bp long with perfect inverted terminal repeats (ITRs) of 48?bp and an open reading frame (ORF) of 533 amino acids, potentially encoding for a transposase; the element is flanked by the dinucleotide TA. The encoded protein is very similar to the putative transposases of three elements from other phytopathogenic fungi, Fot1 from Fusarium oxysporum, and Pot2 and MGR586 from Magnaporthe grisea. The number of Flipper elements in strains of B. cinerea varied from 0 to 20 copies per genome. Analysis of the descendants of one cross showed that the segregation ratio of Flipper elements was 2:2 and that the copies were not linked.     

Sequence analysis of the insertion element ISH1.8 and of associated structural changes in the genome of phage PhiH of the archaebacterium Halobacterium halobium

We have sequenced the insertion element ISH1.8 which can be present in one or two copies in the genome of phage ΦH of Halobacterium halobium. ISH1.8 is 1895 bp long, has no inverted repeat at its ends, and one only of the two copies is flanked by two 5-bp duplications. An 8-bp sequence composed of 4 bp from each end of ISH1.8 is present in both sites lacking the element. This 8-bp sequence could either be a specific insertion sequence or a part of the element that is left behind upon deletion. The plasmid pΦHL, consisting of the invertible L segment of the phage genome which is, in ΦH2 and ΦH5, flanked by two copies of ISH1.8, contains 112 bp of ISH1.8 and is released from the phage genome by recombination within a direct repeat of 9 bp. This 9-bp sequence (TCCCGCCCT) exists as an inverted repeat in ISH1.8 and therefore as two distinct repeats in phage genomes containing two copies of ISH1.8 in inverted orientation.     

Distribution and Replication of the Pathogenicity Plasmid pPATH in Diverse Populations of the Gall-Forming Bacterium Pantoea agglomerans

Pantoea agglomerans has been transformed from a commensal bacterium into two related gall-forming pathovars by acquisition of pPATH plasmids containing a pathogenicity island (PAI). This PAI harbors an hrp/hrc gene cluster, type III effectors, and phytohormone biosynthetic genes. DNA typing by pulsed-field gel electrophoresis revealed two major groups of P. agglomerans pv. gypsophilae and one group of P. agglomerans pv. betae. The pPATH plasmids of the different groups had nearly identical replicons (98% identity), and the RepA protein showed the highest level of similarity with IncN plasmid proteins. A series of plasmids, designated pRAs, in which the whole replicon region (2,170 bp) or deleted derivatives of it were ligated with nptI were generated for replicon analysis. A basic 929-bp replicon (pRA6) was sufficient for replication in Escherichia coli and in nonpathogenic P. agglomerans. However, the whole replicon region (pRA1) was necessary for expulsion of the pPATH plasmid, which resulted in the loss of pathogenicity. The presence of direct repeats in the replicon region suggests that the pPATH plasmid is an iteron plasmid and that the repeats may regulate its replication. The pPATH plasmids are nonconjugative but exhibit a broad host range, as shown by replication of pRA1 in Erwinia, Pseudomonas, and Xanthomonas. Restriction fragment length polymorphism analyses indicated that the PAIs in the two groups of P. agglomerans pv. gypsophilae are similar but different from those in P. agglomerans pv. betae. The results could indicate that the pPATH plasmids evolved from a common ancestral mobilizable plasmid that was transferred into different strains of P. agglomerans.