Plasmid pHH1 of Halobacterium salinarium: characterization of the replicon region, the gas vesicle gene cluster and insertion elements

The DNA sequence of the 5.7 kb plasmid pHH9 containing the replicon region of the 150 kb plasmid pHH1 from Halobacterium salinarium was determined. The minimal region necessary for stable plasmid maintenance lies within a 2.9 kb fragment, as defined by transformation experiments. The DNA sequence contained two open reading frames arranged in opposite orientations, separated by an unusually high AT-rich (60–70% A + T) sequence of 350 bp. All H. salinarium strains (H. halobium, H. cutirubrum) investigated harbour endogenous plasmids containing the pHH1 replicon; however, these pHH1-type plasmids differ by insertions and deletions. Adjacent to the replicon, and separated by a copy of each of the insertion elements ISH27 and ISH26, is the 9 kb p-vac region required for gas vesicle synthesis. Analysis of these and other ISH element copies in pHH1 revealed that most of them lack the target DNA duplication usually found with recently transposed ISH elements. These results underline the plasticity of plasmid pHH1.     

Insertion elements and deletion formation in a halophilic archaebacterium.

Deletion events that occur spontaneously in 36-kilobase-pair (kbp) plasmid pHH4 from the archaebacterium Halobacterium halobium were investigated. Four different deletion derivatives with sizes ranging from 5.7 to 17 kbp were isolated. Three of these deletion variants derived from pHH4 (pHH6 [17 kbp], pHH7 [16 kbp], and pHH8 [6.3 kbp]), whereas the 5.7-kbp plasmid pHH9 derived from pHH6. Strains containing pHH6, pHH7, or pHH9 each lacked the parental plasmid pHH4, while pHH8 occurred at a 1:1 ratio together with pHH4. Common to all of these plasmids was the 5.7-kbp region of pHH9 DNA. The regions containing the fusion site in the deletion derivatives were investigated and compared with the corresponding area of the parental plasmid. Each deletion occurred exactly at the terminus of an insertion element. In pHH6 and pHH7, a halobacterial insertion element (ISH2) was located at the deletion site. The DNA fused to ISH2 displayed a 7-base-pair (bp) (pHH7) or 10-bp (pHH6) sequence homology to the inverted repeat of ISH2. In the two smaller plasmids, pHH8 and pHH9, an ISH27 element was located at the deletion site. Most likely, all of these smaller plasmids resulted from an intramolecular transposition event. The ISH27 insertion sequence contains a 16-bp terminal inverted repeat and duplicates 5 bp of target DNA during the transposition with the specificity 5'ANNNT3'. Four ISH27 copies were analyzed, and two ISH27 element types were identified that have approximately 85% sequence similarity. The ISH27 insertion elements constitute a family which is related to the ISH51 family characterized for H. volcanii, another halophilic archaebacterium.     

Replication of the Streptomyces plasmid pSN22 through single-stranded intermediates

The replication of the 11 kb conjugative multicopy Streptomyces plasmid pSN22 was analyzed. Mutation and complementation analyses indicated that the minimal region essential for plasmid replication was located on a 1.9 kb fragment of pSN22, containing a trans-acting element encoding a replication protein and a cis-acting sequence acting as a replication origin. Southern hybridization showed that minimal replicon plasmids accumulated much more single-stranded plasmid molecules than did wild-type pSN22. Only one strand was accumulated. A 500 by fragment from the pSN22 transfer region was identified which reduced the relative amount of single-stranded DNA, when added in the native orientation to minimal replicon plasmids. This 500 by DNA sequence may be an origin for second-strand synthesis. It had no effect on the efficiency of co-transformation, plasmid incompatibility, or stability. The results indicate that pSN22 replicates via single-stranded intermediates by a rolling circle mechanism.     

Dynamic plasmid populations in Halobacterium halobium.

Deletion events occurring in the major 150-kilobase-pair (kb) plasmid pHH1 of the archaebacterium Halobacterium halobium were investigated. We found four deletion derivatives of pHH1 in gas-vacuole-negative mutants, two of which (pHH23) [65 kb] and pHH4 [36 kb]) we analyzed. Both plasmids incurred more than one deletion, leading to the fusion of noncontiguous pHH1 sequences. pHH23 and pHH4 overlapped by only 4 kb of DNA sequence. A DNA fragment derived from this region was used to monitor the production of further deletion variants of pHH4. A total of 25 single colonies were characterized, 23 of which contained various smaller pHH4 derivatives. Of the 25 colonies investigated, 2 had lost pHH4 entirely and contained only large (greater than or equal to 100-kb) minor covalently closed circular DNAs. One colony contained the 17-kb deletion derivative pHH6 without any residual pHH4. The sizes of the pHH4 deletion derivatives, produced during the development of a single colony, ranged from 5 to 20 kb. In five colonies, pHH4 was altered by the integration of an additional insertion element. These insertions, as well as copies of the various insertion elements already present in pHH4, presumably serve as hot spots for recombination events which result in deletions. A second enrichment procedure led to the identification of colonies containing either a 16-kb (pHH7) or a 5-kb (pHH8) deletion derivative of pHH4 as the major plasmid. pHH8, the smallest plasmid found, contained the 4 kb of unique DNA sequence shared by pHH23 and pHH4, as well as some flanking pHH4 sequences. This result indicates that the 4-kb region contains the necessary sequences for plasmid maintenance and replication.     

Genome organization in Halobacterium halobium: a 70 kb island of more (AT) rich DNA in the chromosome

Summary The more A+T rich fractionated component (FII DNA) of the Halobacterium halobium genome constitutes one third of the total DNA and upon isolation consists of covalently closed circular DNA (pHH1 and minor cccDNA) and nonsupercoiled sequences. We have investigated the physical organization of the non cccDNA in FII by a chromosome walk using one copy of the halobacterial insertion element ISH1 as a start point. This chromosome walk led to the isolation of 160 kb of chromosomal DNA containing 70 kb of FII DNA covalently linked to more G+C rich sequences (FI DNA). Copies of three previously characterized insertion elements (ISH1, ISH2, and ISH26) as well as at least 10 other repeated sequences are clustered within this chromosomal FII DNA island. Unique sequences are found in the FI DNA flanking the FII DNA island as well as in 40 kb of FI DNA surrounding the bacterio-opsin gene. The presence of pHH1 in H. halobium and closely related species correlates with the occurrence of the characterized chromosomal FII DNA island. Halophilic purple membrane producing isolates YC81819-9, GN101, SB3 and GRA lack pHH1 and the 70 kb FII DNA, but contain all of the FI DNA sequences tested. We propose that pHH1 and this chromosomal FII DNA are characteristic genomic components of H. halobium and closely related species, and, that the 70 kb FII DNA might represent a large insertion in the chromosome of H. halobium and closely related species. The conservation of both FI and FII DNA sequences can be used for strain classification and determination of evolutionary relationships among halobacteria.     

Replication of the Streptomyces plasmid pSN22 through single-stranded intermediates

The replication of the 11 kb conjugative multicopy Streptomyces plasmid pSN22 was analyzed. Mutation and complementation analyses indicated that the minimal region essential for plasmid replication was located on a 1.9 kb fragment of pSN22, containing a trans-acting element encoding a replication protein and a cis-acting sequence acting as a replication origin. Southern hybridization showed that minimal replicon plasmids accumulated much more single-stranded plasmid molecules than did wild-type pSN22. Only one strand was accumulated. A 500 by fragment from the pSN22 transfer region was identified which reduced the relative amount of single-stranded DNA, when added in the native orientation to minimal replicon plasmids. This 500 by DNA sequence may be an origin for second-strand synthesis. It had no effect on the efficiency of co-transformation, plasmid incompatibility, or stability. The results indicate that pSN22 replicates via single-stranded intermediates by a rolling circle mechanism.     

Homologies between heterogeneous extrachromosomal DNA populations of Halobacterium halobium and four new halobacterial isolates

Summary Heterogeneous collections of covalently-closed circular DNA (cccDNA) comprise up to 10% of the total DNA of H. halobium and four other halophilic strains (SB3, GRA, GRB and GN101) recently isolated from different sources. All of these bacteria have purple membrane, bacterioruberin and gas vacuoles as characteristic phenotypic markers. Most of the major cccDNA species of these isolates are not homologous to pHH1, the main 150 kb cccDNA of H. halobium NRC817. Only GN101 and SB3 have a cccDNA which is partly homologous to pHH1. In GN101 the homology is to the halobacterial insertion sequence ISH23 found in pHH1. In SB3 the homology is to ISH26, a new insertion sequence isolated from H. halobium NRC817 which has a size of 1,400 bp. Extensive homologies mologies exist between the minor cccDNA species in all five strains indicating that this cccDNA species is highly conserved and possibly originates from (or is part of) the chromosome.A 1.6 kb high copy number cccDNA species is present in three independently isolated GN101, GRB and SB3. This 1.6 kb cccDNA is not homologous to any other extrachromosomal or chromosomal DNA.     

Identification of a replication initiation protein of the pVV8 plasmid from Thermus thermophilus HB8

Recently, the extremely thermophilic bacterium Thermus thermophilus HB8 has been demonstrated to harbor a circular plasmid designated by pVV8 in addition to two well-known plasmids, pTT8 and pTT27, and its entire sequence has been determined. The absence of any obvious replication initiation gene in the 81.2 kb plasmid prompted us to isolate its minimum replicon. By in vivo replication assays with fragments deleted in a stepwise manner, a minimum replicon containing a single ORF, TTHV001, was identified. A protein encoded by TTHV001 showed no amino acid sequence similarity to other function-known proteins. As the results of in vivo and in vitro experiments strongly suggested that the TTHV001 protein was involved in the replication initiation of pVV8, the protein and the gene were referred to as RepV and repV, respectively. The RepV protein binds to an inverted repeat sequence within its own repV gene and then triggers the unwinding of the DNA duplex in an A + T-rich region located just downstream from the inverted repeat. The in vivo replication assays with minimum replicon mutants in the RepV binding site or the unwinding region demonstrated that the unwinding in the region by the RepV binding was essential for pVV8 replication initiation.     

Cloning and characterization of a replicon region of the IncHII plasmid pHH1457

A replicative region of the large conjugative plasmid pHH1457 (incompatibility group HII (IncHII)) was cloned. A 1.4-kbp region, in a stable pSBII14 clone, containing a PolI-independent replicon and determinants for the HII incompatibility phenotype, was selected and characterized. High incompatibility with IncHII plasmids was corroborated. Independent replication of the insert was demonstrated by ligation to an antibiotic resistance cassette. pSBII14 was used as a probe to identify IncHII plasmids from other members of the H complex: IncHI (IncHI1, IncHI2 and IncHI3 subgroups). Hybridization experiments revealed a high homology with the replication region of IncHII plasmids, but not with IncHI1 or IncHI3 plasmid prototypes. Homology with IncHI2 plasmids was observed, suggesting the presence of IncHII-like replicons among this subgroup of plasmids. This is the first report of the characterization of an IncHII plasmid maintenance region.     

Determination and in vivo characterization of the basic replicon of natural plasmids of Methylomonas clara

The basic replicon of the endogenous Methylomonas clara plasmid pBE-2 and its derivatives was defined to a region of 2.7 kb by in vivo deletions and conjugative transfer experiments using Escherichia coli-M. clara hybrid plasmids. Origin activity was found to be confined to a maximal length of 1.3 kb. The origin consists of two fragments which can be separated more than 4 kb by the integration of foreign DNA fragments without loss of function. A fragment having a maximum size of 2.1 kb supports in trans replication initiation at the origin. In addition, two incompatibility determinants were revealed, one localized in the origin fragment and the other outside the origin. Incompatibility between two basic replicons of the natural M. clara plasmids can be overcome by the integration of one of them in the compatible IncP plasmid R68-Km^s. No homology was found between the plasmid basic replicon and the chromosomal DNA of M. clara.     

Characterization of a novel plasmid from extremely halophilic Archaea: nucleotide sequence and function analysis

We determined the complete nucleotide sequence of the 16341 bp plasmid pHH205 of the extremely halophilic archaeon Halobacterium salinarum J7. The plasmid has a G+C content of 61.1%. A number of direct and inverted repeat sequences were found in pHH205, while no insertion sequences were found. Thirty-eight large open reading frames (ORFs) were identified in both strands, and most of them had no significant similarities to known proteins. A putative protein encoded by ORF31 showed 20-41% homology to some hypothetical proteins, which are annotated in several archaeal genome databases as predicted nucleic acid-binding proteins containing PIN domain. Sequence analysis using the GC skew procedure predicted a possible origin of replication. A 4.8 kb PvuII-SnaBI fragment containing both this region and ORF31 was shown to be able to restore replicate of pWL102, a replicon-deficient plasmid in Haloferax volcanii and in H. salinarum R1. Several methods failed to completely cure H. salinarum J7 of pHH205, suggesting that the plasmid probably played an important role in the growth and metabolism of the host. Our work describes a novel haloarchaeal replicon, which may be useful in the construction of cloning and shuttle vectors.     

Complete sequence of the IncP-9 TOL plasmid pWW0 from Pseudomonas putida

The TOL plasmid pWW0 (117 kb) is the best studied catabolic plasmid and the archetype of the IncP-9 plasmid incompatibility group from Pseudomonas. It carries the degradative (xyl) genes for toluenes and xylenes within catabolic transposons Tn4651 and Tn4653. Analysis of the complete pWW0 nucleotide sequence revealed 148 putative open reading frames. Of these, 77 showed similarity to published sequences in the available databases predicting functions for: plasmid replication, stable maintenance and transfer; phenotypic determinants; gene regulation and expression; and transposition. All identifiable transposition functions lay within the boundaries of the 70 kb transposon Tn4653, leaving a 46 kb sector containing all the IncP-9 core functions. The replicon and stable inheritance region was very similar to the mini-replicon from IncP-9 antibiotic resistance plasmid pM3, with their Rep proteins forming a novel group of initiation proteins. pWW0 transfer functions exist as two blocks encoding putative DNA processing and mating pair formation genes, with organizational and sequence similarity to IncW plasmids. In addition to the known Tn4651 and IS1246 elements, two additional transposable elements were identified as well as several putative transposition functions, which are probably genetic remnants from previous transposition events. Genes likely to be responsible for known resistance to ultraviolet light and free radicals were identified. Other putative phenotypic functions identified included resistance to mercury and other metal ions, as well as to quaternary ammonium compounds. The complexity and size of pWW0 is largely the result of the mosaic organization of the transposable elements that it carries, rather than the backbone functions of IncP-9 plasmids.     

Genetic and functional properties of the self-transmissible Yersinia enterocolitica plasmid pYE854, which mobilizes the virulence plasmid pYV

Yersinia strains frequently harbor plasmids, of which the virulence plasmid pYV, indigenous in pathogenic strains, has been thoroughly characterized during the last decades. Yet, it has been unknown whether the nonconjugative pYV can be transferred by helper plasmids naturally occurring in this genus. We have isolated the conjugative plasmids pYE854 (95.5 kb) and pYE966 (70 kb) from a nonpathogenic and a pathogenic Yersinia enterocolitica strain, respectively, and demonstrate that both plasmids are able to mobilize pYV. The complete sequence of pYE854 has been determined. The transfer proteins and oriT of the plasmid reveal similarities to the F factor. However, the pYE854 replicon does not belong to the IncF group and is more closely related to a plasmid of gram-positive bacteria. Plasmid pYE966 is very similar to pYE854 but lacks two DNA regions of the larger plasmid that are dispensable for conjugation.     

Distribution and Replication of the Pathogenicity Plasmid pPATH in Diverse Populations of the Gall-Forming Bacterium Pantoea agglomerans

Pantoea agglomerans has been transformed from a commensal bacterium into two related gall-forming pathovars by acquisition of pPATH plasmids containing a pathogenicity island (PAI). This PAI harbors an hrp/hrc gene cluster, type III effectors, and phytohormone biosynthetic genes. DNA typing by pulsed-field gel electrophoresis revealed two major groups of P. agglomerans pv. gypsophilae and one group of P. agglomerans pv. betae. The pPATH plasmids of the different groups had nearly identical replicons (98% identity), and the RepA protein showed the highest level of similarity with IncN plasmid proteins. A series of plasmids, designated pRAs, in which the whole replicon region (2,170 bp) or deleted derivatives of it were ligated with nptI were generated for replicon analysis. A basic 929-bp replicon (pRA6) was sufficient for replication in Escherichia coli and in nonpathogenic P. agglomerans. However, the whole replicon region (pRA1) was necessary for expulsion of the pPATH plasmid, which resulted in the loss of pathogenicity. The presence of direct repeats in the replicon region suggests that the pPATH plasmid is an iteron plasmid and that the repeats may regulate its replication. The pPATH plasmids are nonconjugative but exhibit a broad host range, as shown by replication of pRA1 in Erwinia, Pseudomonas, and Xanthomonas. Restriction fragment length polymorphism analyses indicated that the PAIs in the two groups of P. agglomerans pv. gypsophilae are similar but different from those in P. agglomerans pv. betae. The results could indicate that the pPATH plasmids evolved from a common ancestral mobilizable plasmid that was transferred into different strains of P. agglomerans.     

Isolation and sequencing of the replication region of plasmid pBFp1 isolated from a marine biofilm

A 24 kb plasmid, pBFp1, encoding mercury resistance was previously isolated from a marine biofilm. Isolation and sequencing of a 4280 bp DNA fragment containing the plasmid replicon (rep-pBFp1) revealed a putative open reading frame encoding a RepA protein and an oriV-like region containing an A+T rich sub-region, iterons, and DnaA boxes. Sequence comparisons showed significant similarities to the incW plasmid pSa both for the RepA amino acid sequence and in the iteron DNA sequence. Plasmid pBFp1 was also shown to be incompatible with pSa in standard incompatibility testing. A probe from the repA gene of pBFp1 was further made and tested on a collection of plasmids exogenously isolated from marine habitats in a previous study.     

The complete DNA sequence and analysis of R27, a large IncHI plasmid from Salmonella typhi that is temperature sensitive for transfer

Salmonella typhi, the causative agent of typhoid fever, annually infects 16 million people and kills 600 000 world wide. Plasmid-encoded multiple drug resistance in S.typhi is always encoded by plasmids of incompatibility group H (IncH). The complete DNA sequence of the large temperature-sensitive conjugative plasmid R27, the prototype for the IncHI1 family of plasmids, has been compiled and analyzed. This 180 kb plasmid contains 210 open reading frames (ORFs), of which 14 have been previously identified and 56 exhibit similarity to other plasmid and prokaryotic ORFs. A number of insertion elements were found, including the full Tn10 transposon, which carries tetracycline resistance genes. Two transfer regions, Tra1 and Tra2, are present, which are separated by a minimum of 64 kb. Homologs of the DNA-binding proteins TlpA and H-NS that act as temperature-regulated repressors in other systems have been located in R27. Sequence analysis of transfer and replication regions supports a mosaic-like structure for R27. The genes responsible for conjugation and plasmid maintenance have been identified and mechanisms responsible for thermosensitive transfer are discussed.     

Identification by deletion analysis of an inducible protein required for plasmid pSC101-mediated tetracycline resistance.

Plasmids containing small deletions within a tetracycline (Tc) resistance gene(s) of plasmid pHA121 were isolated. Plasmid pHA121 was formed by ligating the EcoRI-digested Tc resistance plasmid pSC101 and similarly digested mini-ColE1 plasmid pHA105. The DNA deletion plasmids were constructed by digesting plasmid pHA121 DNA with the restriction endonucleases BamH1 and Sal1 and, in addition, λ exonuclease. Two plasmids, designated pJT131 and pJT133, had small deletions of approximately 0.64 to 0.8 kb and a comparison of the radioactive polypeptides synthesized in plasmid-containing minicells revealed that a 34-kdal polypeptide was not specified by either pJT131 or pJT133. We conclude that the 34-kdal polypeptide is required for the expression of Tc resistance and that its structural gene probably maps in the deleted region of pSC101 DNA.     

Determination and in vivo characterization of the basic replicon of natural plasmids of Methylomonas clara

The basic replicon of the endogenous Methylomonas clara plasmid pBE-2 and its derivatives was defined to a region of 2.7 kb by in vivo deletions and conjugative transfer experiments using Escherichia coli-M. clara hybrid plasmids. Origin activity was found to be confined to a maximal length of 1.3 kb. The origin consists of two fragments which can be separated more than 4 kb by the integration of foreign DNA fragments without loss of function. A fragment having a maximum size of 2.1 kb supports in trans replication initiation at the origin. In addition, two incompatibility determinants were revealed, one localized in the origin fragment and the other outside the origin. Incompatibility between two basic replicons of the natural M. clara plasmids can be overcome by the integration of one of them in the compatible IncP plasmid R68-Kms. No homology was found between the plasmid basic replicon and the chromosomal DNA of M. clara.