High efficient gene targeting on the AGAMOUS gene in an ArabidopsisAtLIG4 mutant

Gene targeting induced by homologous integration of a foreign DNA segment into a chromosomal target sequence enables precise disruption or replacement of genes of interest and provides an effective means to analyze gene function, and also becomes an useful technique for breeding. But, integration of introduced DNA fragments is predominantly non-homologous in most species. However, we presented high-efficient homologous integration in disruptants of non-homologous end joining (NHEJ), that is, the Ku70-, Ku80- or Lig4-homologs deficient strain, in a model fungus Neurospora crassa. When the effect of NHEJ-defective plants for gene targeting was therefore examined in a model plant Arabidopsis (Arabidopsis thaliana), the efficiencies of gene targeting in the Atlig4/Atlig4 plant were 2/7 (28.6%) against calli obtained a selection-marker gene, 2/16 (12.5%) against selected calli, and about 2/540 (0.004%) against total cell particles at the starting point for transformation. The results of this paper show that the NHEJ-deficient system might cause a decrease in the efficiency of transformation but gives true targeted transformants with high efficiency in plant cell.     

Extending the Schizosaccharomyces pombe Molecular Genetic Toolbox

Targeted alteration of the genome lies at the heart of the exploitation of S. pombe as a model system. The rate of analysis is often determined by the efficiency with which a target locus can be manipulated. For most loci this is not a problem, however for some loci, such as fin1 ⁺, rates of gene targeting below 5% can limit the scope and scale of manipulations that are feasible within a reasonable time frame. We now describe a simple modification of transformation procedure for directing integration of genomic sequences that leads to a 5-fold increase in the transformation efficiency when antibiotic based dominant selection markers are used. We also show that removal of the pku70 ⁺ and pku80 ⁺ genes, which encode DNA end binding proteins required for the non-homologous end joining DNA repair pathway, increases the efficiency of gene targeting at fin1 ⁺ to around 75–80% (a 16-fold increase). We describe how a natMX6/rpl42 ⁺ cassette can be used for positive and negative selection for integration at a targeted locus. To facilitate the evaluation of the impact of a series of mutations on the function of a gene of interest we have generated three vector series that rely upon different selectable markers to direct the expression of tagged/untagged molecules from distinct genomic integration sites. pINTL and pINTK vectors use ura4 ⁺ selection to direct disruptive integration of leu1 ⁺ and lys1 ⁺ respectively, while pINTH vectors exploit nourseothricin resistance to detect the targeted disruption of a hygromycin B resistance conferring hphMX6 cassette that has been integrated on chromosome III. Finally, we have generated a series of multi-copy expression vectors that use resistance to nourseothricin or kanamycin/G418 to select for propagation in prototrophic hosts. Collectively these protocol modifications and vectors extend the versatility of this key model system.     

Development of a transformation system for gene knock-out in the flavinogenic yeast Pichia guilliermondii

Pichia guilliermondii is a representative of a yeast species, all of which over-synthesize riboflavin in response to iron deprivation. Molecular genetic studies in this yeast species have been hampered by a lack of strain-specific tools for gene manipulation. Stable P. guilliermondii ura3 mutants were selected on the basis of 5'-fluoroorotic acid resistance. Plasmid carrying Saccharomyces cerevisiae URA3 gene transformed the mutant strains to prototrophy with a low efficiency. Substitution of a single leucine codon CUG by another leucine codon CUC in the URA3 gene increased the efficiency of transformation 100 fold. Deletion cassettes for the RIB1 and RIB7 genes, coding for GTP cyclohydrolase and riboflavin synthase, respectively, were constructed using the modified URA3 gene and subsequently introduced into a P. guilliermondii ura3 strain. Site-specific integrants were identified by selection for the Rib(-) Ura(+) phenotype and confirmed by PCR analysis. Transformation of the P. guilliermondii ura3 strain was performed using electroporation, spheroplasting or lithium acetate treatment. Only the lithium acetate transformation procedure provided selection of uracil prototrophic, riboflavin deficient recombinant strains. Depending on the type of cassette, efficiency of site-specific integration was 0.1% and 3-12% in the case of the RIB1 and RIB7 genes, respectively. We suggest that the presence of the ARS element adjacent to the 3' end of the RIB1 gene significantly reduced the frequency of homologous recombination. Efficient gene deletion in P. guilliermondii can be achieved using the modified URA3 gene of S. cerevisiae flanked by 0.8-0.9 kb sequences homologous to the target gene.     

Development of an efficient genetic manipulation strategy for sequential gene disruption and expression of different heterologous <Emphasis Type="Italic">GFP</Emphasis> genes in <Emphasis Type="Italic">Candida tropicalis</Emphasis>

The diploid yeast Candida tropicalis, which can utilize n-alkane as a carbon and energy source, is an attractive strain for both physiological studies and practical applications. However, it presents some characteristics, such as rare codon usage, difficulty in sequential gene disruption, and inefficiency in foreign gene expression, that hamper strain improvement through genetic engineering. In this work, we present a simple and effective method for sequential gene disruption in C. tropicalis based on the use of an auxotrophic mutant host defective in orotidine monophosphate decarboxylase (URA3). The disruption cassette, which consists of a functional yeast URA3 gene flanked by a 0.3 kb gene disruption auxiliary sequence (gda) direct repeat derived from downstream or upstream of the URA3 gene and of homologous arms of the target gene, was constructed and introduced into the yeast genome by integrative transformation. Stable integrants were isolated by selection for Ura⁺ and identified by PCR and sequencing. The important feature of this construct, which makes it very attractive, is that recombination between the flanking direct gda repeats occurs at a high frequency (10^?8) during mitosis. After excision of the URA3 marker, only one copy of the gda sequence remains at the recombinant locus. Thus, the resulting ura3 strain can be used again to disrupt a second allelic gene in a similar manner. In addition to this effective sequential gene disruption method, a codon-optimized green fluorescent protein-encoding gene (GFP) was functionally expressed in C. tropicalis. Thus, we propose a simple and reliable method to improve C. tropicalis by genetic manipulation.     

New strategy to improve efficiency for gene replacement in Klebsiella pneumoniae

We previously reported the method for introducing gene replacement into Klebsiella pneumoniae through Red-assisted homologous recombination; and it demonstrated that a higher transformation efficiency required long flanking arms at both ends of the linear DNA. The assembly job of the linear DNA is usually time-consuming and laborious. We report here an innovative method for DNA exchange in K. pneumoniae based on PCR-mediated Red recombination. The novel procedure enables rapid gene replacement in K. pneumoniae without prior cloning of the gene of interest; the key modification is to perform PCR reaction to generate linear DNA with extra non-homologous fragments on both ends as mercenary sequences which come from a TA-cloning plasmid. We give a demonstration by deleting the gene dhak1 in K. pneumoniae with high efficiency of about 20 CFU/μg DNA using the new technique.     

Rare Homologous Gene Targeting in Histoplasma capsulatum: Disruption of the URA5Hc Gene by Allelic Replacement

URA5 genes encode orotidine-5′-monophosphate pyrophosphorylase (OMPpase), an enzyme involved in pyrimidine biosynthesis. We cloned the Histoplasma capsulatum URA5 gene (URA5_Hc) by using a probe generated by PCR with inosine-rich primers based on relatively conserved sequences in OMPpases from other organisms. Transformation with this gene restored uracil prototrophy and OMPpase activity to UV-mutagenized ura5 strains of H. capsulatum. We attempted to target the genomic URA5 locus in this haploid organism to demonstrate homologous allelic replacement with transforming DNA, which has not been previously done in H. capsulatum and has been challenging in some other pathogenic fungi. Several strategies commonly used in Saccharomyces cerevisiae and other eukaryotes were unsuccessful, due to the frequent occurrence of ectopic integration, linear plasmid formation, and spontaneous resistance to 5-fluoroorotic acid, which is a selective agent for URA5 gene inactivation. Recent development of an efficient electrotransformation system and of a second selectable marker (hph, conferring hygromycin B resistance) for this fungus enabled us to achieve allelic replacement by using transformation with an insertionally inactivated Δura5_Hc::hph plasmid, followed by dual selection with hygromycin B and 5-fluoroorotic acid, or by screening hygromycin B-resistant transformants for uracil auxotrophy. The relative frequency of homologous gene targeting was approximately one allelic replacement event per thousand transformants. This work demonstrates the feasibility but also the potential challenge of gene disruption in this organism. To our knowledge, it represents the first example of experimentally directed allelic replacement in H. capsulatum, or in any dimorphic systemic fungal pathogen of humans.     

PCR-mediated direct gene disruption in Schizosaccharomyces pombe.

We have examined the feasibility and efficiency of PCR-mediated direct gene disruptions in the fission yeast Schizosaccharomyces pombe. In the present study, the S.pombe ura4+ gene was amplified by PCR with oligonucleotides that had short flanking regions ( approximately 40 bp) to the target gene. Using this purified PCR product we were able to disrupt genes in an S. pombe strain bearing aura4 deletion, with an efficiency ranging between 1 and 3% among selected transformants. The results indicated that despite S.pombe's preference for non-homologous or illegitimate recombination, even very short stretches of homologous regions could be used to target genes at a defined frequency in this organism. The successful disruption of four independent genes (sts1+, gcs1+, gsh2+and hmt1+) by this method further demonstrates that, despite the relatively low efficiency, the method is very feasible, and it's simplicity, especially when coupled to phenotype-based screening, should greatly facilitate disruption of genes in S.pombe.     

Parameters determining the efficiency of gene targeting in the moss Physcomitrella patens

In the moss Physcomitrella patens, transforming DNA containing homologous sequences integrates predominantly by homologous recombination with its genomic target. A systematic investigation of the parameters that determine gene targeting efficiency shows a direct relationship between homology length and targeting frequency for replacement vectors (a selectable marker flanked by homologous DNA). Overall homology of only 1 kb is sufficient to achieve a 50% yield of targeted transformants. Targeting may occur through homologous recombination in one arm, accompanied by non-homologous end-joining by the other arm of the vector, or by allele replacement following two homologous recombination events. Allele replacement frequency depends on the symmetry of the targeting vector, being proportional to the length of the shorter arm. Allele replacement may involve insertion of multiple copies of the transforming DNA, accompanied by ectopic insertions at non-homologous sites. Single-copy and single insertions at targeted loci (targeted gene replacements, ‘TGR’) occur with a frequency of 7–20% of all transformants when the minimum requirements for allele replacement are met. Homologous recombination in Physcomitrella is substantially more efficient than in any multicellular eukaryote, recommending it as the outstanding model for the study of homologous recombination in plants.     

Efficient homologous recombination with short length flanking fragments in Ku70 deficient Yarrowia lipolytica strains

In Yarrowia lipolytica, targeted gene replacement occurs only with long length (1 kb) homologous flanking fragments, as this yeast preferentially uses the non-homologous end-joining mechanism (NHEJ) for DNA repair over homologous recombination (HR). To improve the frequency of HR, we identified and disrupted the KU70 and KU80 genes responsible for double strand break repair in the NHEJ pathway in Y. lipolytica. In ku70? HR of URA3 marker at the ADE2 locus occurred with 43 % frequency with as little as 50 bp long flanking regions. The number of Ura⁺ transformants was reduced to 1 % of the Po1d (ura3-302) wild type-like strain level, regardless of the flanking fragment length. On the contrary, even though HR was not improved in ku80?, Ura⁺ transformants was 60 % lower compared to the wild type.     

The natural transformation of the soil bacteria Pseudomonas stutzeri and Acinetobacter sp. by transgenic plant DNA strictly depends on homologous sequences in the recipient cells

The nptII(+) gene present in the genome of transgenic potato plants transforms naturally competent cells of the soil bacteria Pseudomonas stutzeri and Acinetobacter BD413 (both harboring a plasmid with an nptII gene containing a small deletion) with the same high efficiency as nptII(+) genes on plasmid DNA (3x10(-5)-1x10(-4) transformants per nptII(+)) despite the presence of a more than 10(6)-fold excess of plant DNA. However, in the absence of homologous sequences in the recipient cells the transformation by nptII(+) dropped by at least about 10(8)-fold in P. stutzeri and 10(9)-fold in Acinetobacter resulting in the latter strain in < or =1x10(-13) transformants per nptII(+). This indicated a very low probability of non-homologous DNA fragments to be integrated by illegitimate recombination events during transformation.     

Gene-specific disruption in the filamentous fungus <Emphasis Type="Italic">Cercospora nicotianae</Emphasis> using a split-marker approach

To determine if DNA configuration, gene locus, and flanking sequences will affect homologous recombination in the phytopathogenic fungus Cercospora nicotianae, we evaluated and compared disruption efficiency targeting four cercosporin toxin biosynthetic genes encoding a polyketide synthase (CTB1), a monooxygenase/O-methyltransferase (CTB3), a NADPH-dependent oxidoreductase (CTB5), and a FAD/FMN-dependent oxidoreductase (CTB7). Transformation of C. nicotianae using a circular plasmid resulted in low disruption frequency. The use of endonucleases or a selectable marker DNA fragment flanked by homologous sequence either at one end or at both ends in the transformation procedures, increased disruption efficiency in some but not all CTB genes. A split-marker approach, using two DNA fragments overlapping within the selectable marker, increased the frequency of targeted gene disruption and homologous integration as high as 50%, depending on the target gene and on the length of homologous DNA sequence flanking the selectable marker. The results indicate that the split-marker approach favorably decreased ectopic integration and thus, greatly facilitated targeted gene disruption in this important fungal pathogen. The GenBank/EMBL/DDBJ accession numbers for the sequence data reported in this article are: CTB1, AY649543, CTB3, DQ355149, CTB5, DQ991507, and CTB7, DQ991509.     

Split marker transformation increases homologous integration frequency in Cryptococcus neoformans

Gene disruption in Cryptococcus neoformans can be problematic due to high frequencies of ectopic integration and telomerization. To improve the frequency of homologous integration, a transformation strategy was employed called split marker, which utilizes a mixture of DNAs comprised of overlapping truncations of the selectable marker. Five genes were compared for homologous integration frequencies using various constructs. Homologous integration was highest when the split marker approach was used, with rates as high as 60% depending on target gene. A second factor that contributed to an increased homologous integration frequency was strain background, which was highest when a double auxotroph was used as a host. The split marker strategy was combined with an ura-blaster construct, which has been used in other fungi to recycle ura5 or ura3 mutations. When a hisG-URA5-hisG cassette was successfully integrated at the target locus, the URA5 gene could be easily evicted by plating onto 5-FOA agar. The cassette was then successfully used for a second cycle of transformation-eviction. The effectiveness of the split marker disruption strategy suggests that continued investigation and modification of traditional molecular techniques could increase the efficiency of C. neoformans molecular manipulation.     

Optimization of the URA-blaster disruption system in Candida guilliermondii: Efficient gene targeting using the URA3 marker

We established a simple transformation system for C. guilliermondii by developing both an ura3 ATCC 6260-derived recipient strain as well as an URA3 blaster cassette. We demonstrated that this strategy allows efficient multiple gene disruption by homologous recombination with a convenient gene targeting frequency.     

Restriction enzymes increase efficiencies of illegitimate DNA integration but decrease homologous integration in mammalian cells

Mammalian cells repair DNA double-strand breaks by illegitimate end-joining or by homologous recombination. We investigated the effects of restriction enzymes on illegitimate and homologous DNA integration in mammalian cells. A plasmid containing the neo^R expression cassette, which confers G418 resistance, was used to select for illegitimate integration events in CHO wild-type and xrcc5 mutant cells. Co-transfection with the restriction enzymes BamHI, BglII, EcoRI and KpnI increased the efficiency of linearized plasmid integration up to 5-fold in CHO cells. In contrast, the restriction enzymes did not increase the integration efficiency in xrcc5 mutant cells. Effects of restriction enzymes on illegitimate and homologous integration were also studied in mouse embryonic stem (ES) cells using a plasmid containing the neo^R gene flanked by exon 3 of Hprt. The enzymes BamHI, BglII and EcoRI increased the illegitimate integration efficiency of transforming DNA several-fold, similar to the results for CHO cells. However, all three enzymes decreased the absolute frequency of homologous integration ~2-fold, and the percentage of homologous integration decreased >10-fold. This suggests that random DNA breaks attract illegitimate recombination (IR) events that compete with homology search.     

The size and ratio of homologous sequence to non-homologous sequence in gene disruption cassette influences the gene targeting efficiency in <Emphasis Type="Italic">Beauveria bassiana</Emphasis>

Targeted gene replacement via homologous recombination (HR) is a conventional approach for the analysis of gene function. However, this event is rare in Beauveria bassiana, which hampers efficient functional analysis in this widely used entomopathogenic fungus. To improve homologous recombination frequency in B. bassiana, we investigated the effect of the ratio of homologous sequence to non-homologous sequence (HS/NHS) in gene disruption cassette upon the HR frequency by two gene loci BbNtl and BbThi, using the herpes simplex virus thymidine kinase as a negative selectable marker against ectopic transformants. Our data revealed that an increase of the ratio of HS/NHS achieved by either extending homologous sequence or decreasing non-homologous sequence could improve HR frequency in B. bassiana. We determined empirically that (1) at least 700 bp of homology to both sides of a target gene was needed to get a reasonable number of disruptants, e.g., 6.7‰ to 13.3‰ in B. bassiana. (2) When the ratio of HS/NHS was above 0.8, an acceptable HR frequency could be achieved for gene replacement in B. bassiana, while when the ratio was below 0.3, few gene disrupted mutants were obtained.     

Cloning and sequencing of the ura3 locus of the methylotrophic yeast Hansenula polymorpha and its use for the generation of a deletion by gene replacement

The ura3 gene of Hansenula polymorpha was cloned, sequenced and used to generate a ura3 mutant from the wild-type strain of this yeast via integrative mutagenesis. The Tn5 neomycin-resistance marker (neo) under control of the ADH1 promoter from Saccharomyces cerevisiae served as a transformation marker. The results show that gene replacement can be achieved in H. polymorpha, a yeast with a high level of non-homologous integration. Correspondence to: C. P. Hollenberg     

Development of an efficient gene targeting system in Colletotrichum higginsianum using a non-homologous end-joining mutant and Agrobacterium tumefaciens-mediated gene transfer

The hemibiotrophic ascomycete Colletotrichum higginsianum is the casual agent of anthracnose disease of cruciferous plants. High efficiency transformation by Agrobacterium tumefaciens-mediated gene transfer has been established for this fungus. However, targeted gene mutagenesis through homologous recombination rarely occurs in C. higginsianum. We have identified and disrupted the C. higginsianum homologue of the human Ku70 gene, ChKU70, which encodes a protein that plays a role in non-homologous end-joining for repair of DNA breaks. chku70 mutants showed a dramatic increase in the frequency of integration of introduced exogenous DNA fragments by homologous recombination without any detectable phenotypic defects. This result demonstrates that the chku70 mutant is an efficient recipient for targeted gene mutagenesis in C. higginsianum. We have also developed a novel approach [named direct repeat recombination-mediated gene targeting (DRGT)] for targeted gene disruption through Agrobacterium tumefaciens-mediated gene transfer. DRGT utilizes homologous recombination between repeated sequences on the T-DNA flanking a partial fragment of the target gene. Our results suggest that DRGT in the chku70 mutant background could be a useful tool for rapid isolation of targeted gene disruptants in C. higginsianum.     

Gene inactivation in the plant pathogen Glomerella cingulata: three strategies for the disruption of the pectin lyase gene pnIA

The feasibility of performing routine transformation-mediated mutagenesis in Glomerella cingulata was analysed by adopting three one-step gene disruption strategies targeted at the pectin lyase gene pnIA. The efficiencies of disruption following transformation with gene replacement- or gene truncation-disruption vectors were compared. To effect replacement-disruption, G. cingulata was transformed with a vector carrying DNA from the pnlA locus in which the majority of the coding sequence had been replaced by the gene for hygromycin B resistance. Two of the five transformants investigated contained an inactivated pnlA gene (pnlA ^? );both also contained ectopically integrated vector sequences. The efficacy of gene disruption by transformation with two gene truncation-disruption vectors was also assessed. Both vectors carried a 5′and 3′truncated copy of the pnlA coding sequence, adjacent to the gene for hygromycin B resistance. The promoter sequences controlling the selectable marker differed in the two vectors. In one vector the homologous G. cingulata gpdA promoter controlled hygromycin B phosphotransferase expression (homologous truncation vector), whereas in the second vector promoter elements were from the Aspergillus nidulans gpdA gene (heterologous truncation vector). Following transformation with the homologous truncation vector, nine transformants were analysed by Southern hybridisation; no transformants contained a disrupted pnlA gene. Of nineteen heterologous truncation vector transformants, three contained a disrupted pnlA gene; Southern analysis revealed single integrations of vector sequence at pnlA in two of these transformants. pnlA mRNA was not detected by Northern hybridisation in pnlA-transformants. pnlA-transformants failed to produce a PNLA protein with a pI identical to one normally detected in wild-type isolates by silver and activity staining of isoelectric focussing gels. Pathogenesis on Capsicum and apple was unaffected by disruption of the pnlA gene, indicating that the corresponding gene product, PNLA, is not essential for pathogenicity. Gene disruption is a feasible method for selectively mutating defined loci in G. cingulata for functional analysis of the corresponding gene products.     

High frequency of yeast transformation by plasmids carrying part or entire 2-micron yeast plasmid.

By using two chimeric plasmids containing yeast ura3 gene and 2-micron yeast DNA linked to the bacterial plasmid pCR1, yeast transformation of a high frequency has been achieved. The first plasmid is such that the 2-micron DNA part, in which the ura3 gene is incorporated, can be removed in one step and thus the 2-micron-ura3 sequence can be considered as a "transposable" block. In contrast, the second one bears the entire 2-micron plasmid and the ura3 gene is inserted in the bacterial plasmid part. As shown through hybridization experiments and genetic studies, the ura3 gene was maintained as a cytoplasmic element. Plasmids recovered from the yeast transformants were used to transform Escherichia coli. Their analysis by EcoRI showed that in many cases the vector had recombined with the endogenous 2-micron DNA of the recipient strain. The specific activity of orotidine 5'-monophosphate decarboxylase (coded by ura3) in yeast transformants was 10- to 30-fold higher than in the wild type.