Reversible immobilization of invertase on Cu-chelated polyvinylimidazole-grafted iron oxide nanoparticles

Polyvinylimidazole (PVI)-grafted iron oxide nanoparticles (PVIgMNP) were prepared by grafting of telomere of PVI on the iron oxide nanoparticles. Different metal ions (Cu²⁺, Zn²⁺, Cr²⁺, Ni²⁺) ions were chelated on polyvinylimidazole-grafted iron oxide nanoparticles, and then the metal-chelated magnetic particles were used in the adsorption of invertase. The maximum invertase immobilization capacity of the PVIgMNP–Cu²⁺ beads was observed to be 142.856 mg/g (invertase/PVIgMNP) at pH 5.0. The values of the maximum reaction rate (V _max) and Michaelis–Menten constant (Km) were determined for the free and immobilized enzymes. The enzyme adsorption–desorption studies, pH effect on the adsorption efficiency, affinity of different metal ions, the kinetic parameters and storage stability of free and immobilized enzymes were evaluated.     

Preconcentration with Bacillus subtilis–Immobilized Amberlite XAD-16: Determination of Cu2+ and Ni2+ in River,Soil, and Vegetable Samples

Solid-phase extraction (SPE) method was developed for the preconcentration of Cu²⁺ and Ni²⁺ before their determination by inductively coupled plasma optical emission spectrometry (ICP-OES). Bacillus subtilis–immobilized Amberlite XAD-16 was used as biosorbent. Effects of critical parameters such as pH, flow rate of samples, amount of Amberlite XAD-16 and biosorbent, sample volume, eluent type, and volume and concentration of eluent on column preconcentration of Cu²⁺ and Ni²⁺ were optimized. Applicability of the method was validated through the analysis of the certified reference tea sample (NCS ZC73014). Sensitivity of ICP-OES was improved by 36.4-fold for Cu²⁺ and 38.0-fold for Ni²⁺ by SPE-ICP-OES method. Limit of quantitation (LOQ) was found to be 0.7 and 1.1 ng/ml for Cu²⁺ and Ni²⁺, respectively. Concentrations of Cu²⁺ and Ni²⁺ were determined by ICP-OES after application of developed method. Relative standard deviations (RSDs) were lower than 4.9% for Cu²⁺ and 7.9% for Ni²⁺. The Tigris River that irrigates a large agricultural part of Southeast Turkey is polluted by domestic and industrial wastes. Concentrations of Cu²⁺ and Ni²⁺ were determined in water, soil, and some edible vegetables as a biomonitor for heavy metal pollution.     

Uptake of heavy metals by <Emphasis Type="Italic">Stylonychia mytilus</Emphasis> and its possible use in decontamination of industrial wastewater

The heavy metal resistant ciliate, Stylonychia mytilus, isolated from industrial wastewater has been shown to be potential bioremediator of contaminated wastewater. The ciliate showed tolerance against Zn²⁺ (30 μg/mL), Hg²⁺ (16 μg/mL) and Ni²⁺ (16 μg/mL). The metal ions slowed down the growth of the ciliate as compared with the culture grown without metal stress. The reduction in cell population was 46% for Cd²⁺, 38% for Hg²⁺, 23% for Zn²⁺, 39% for Cu²⁺ and 51% for Ni²⁺ after 8 days of metal stress. S. mytilus reduced 91% of Cd²⁺, 90% of Hg²⁺ and 98% of Zn²⁺ from the medium after 96 h of incubation in a culture medium containing 10 μg/mL of the respective metal ions. Besides this, the ciliate could also remove 88% of Cu²⁺ and 73% Ni²⁺ from the medium containing 5 μg/mL of each metal after 96 h. The ability of Stylonychia to take up variety of heavy metals from the medium could be exploited for metal detoxification and environmental clean-up operations.     

Heterologous Expression and Metal-Binding Characterization of a Type 1 Metallothionein Isoform (OsMTI-1b) from Rice (Oryza sativa)

Metallothioneins (MTs) are ubiquitous, low molecular mass and cysteine-rich proteins that play important roles in maintaining intracellular metal homeostasis, eliminating metal toxification and protecting the cells against oxidative damages. MTs are able to bind metal ions through the thiol groups of their cysteine residues. Plants have several MT isoforms which are classified into four types based on the arrangement of cysteine residues. In the present study, a rice (Oryza sativa) gene encoding type 1 MT isoform, OsMTI-1b, was inserted in vector pET41a and overexpressed in Escherichia coli as carboxy-terminal extensions of glutathione-S-transferase (GST). The recombinant protein GST-OsMTI-1b was purified using affinity chromatography and its ability to bind with Ni²⁺, Cd²⁺, Zn²⁺ and Cu²⁺ ions was analyzed. The results demonstrated that this isoform has ability to bind Ni²⁺, Cd²⁺ and Zn²⁺ ions in vitro, whereas it has no substantial ability to bind Cu²⁺ ions. From competitive reaction with 5,5′-dithiobis(2-nitrobenzoic acid), DTNB, the affinity of metal ions for recombinant form of GST-OsMTI-1b was as follows: Ni²⁺/Cd²⁺ > Zn²⁺ > Cu²⁺     

Isolation,selection, and biological characterization research of highly effective electricigens from MFCs for phenol degradation

The microbial fuel cells (MFCs) are recognized to be highly effective for the biodegradation of phenol. For isolating the phenol-degrading bacteria, the sample containing 500 mg/L phenol was collected from the MFCs. The strain (WL027) was identified basing on the 16S rRNA gene analysis and phylogenetic analysis as Bacillus cereus. The effects of pH, temperature, concentrations of phenol, heavy metal ions, and salt on the growth of strain as well as the degradation of phenol have been carefully studied. The WL027-strain exhibited favorable tolerance for the metal cations including Cr²⁺, Co²⁺, Pb²⁺, and Cu²⁺ with the concentration of 0.2 mg/L and NaCl solution with a high concentration of 30 g/L. In 41 h, 86.44% of 500 mg/L phenol has been degraded at the initial pH at 6 and the temperature of 30 °C. The strain was highly active electrogenesis bacteria and the coulombic efficiency reached 64.25%, which showed significant advantage on the efficient energy conversion. Therefore, due to the highly efficient degradation of phenol, WL027-strain could be used in the treatment of phenol-containing wastewater.     

Influence of metal ions on bioremediation activity of protocatechuate 3,4-dioxygenase from Stenotrophomonas maltophilia KB2

The aim of this paper was to describe the effect of various metal ions on the activity of protocatechuate 3,4-dioxygenase from Stenotrophomonas maltophilia KB2. We also compared activity of different dioxygenases isolated from this strain, in the presence of metal ions, after induction by various aromatic compounds. S. maltophilia KB2 degraded 13 mM 3,4-dihydroxybenzoate, 10 mM benzoic acid and 12 mM phenol within 24 h of incubation. In the presence of dihydroxybenzoate and benzoate, the activity of protocatechuate 3,4-dioxygenase and catechol 1,2-dioxygenase was observed. Although Fe³⁺, Cu²⁺, Zn²⁺, Co²⁺, Al³⁺, Cd²⁺, Ni²⁺ and Mn²⁺ ions caused 20–80 % inhibition of protocatechuate 3,4-dioxygenase activity, the above-mentioned metal ions (with the exception of Ni²⁺) inhibited catechol 1,2-dioxygenase to a lesser extent or even activate the enzyme. Retaining activity of at least one of three dioxygenases from strain KB2 in the presence of metal ions makes it an ideal bacterium for bioremediation of contaminated areas.     

Heavy metal uptake capacities by the common freshwater green alga Cladophora fracta

Macroalgae have received much attention for heavy metal removal in treatment of domestic wastewater. In this report, the uptake capacity of a common freshwater green alga, Cladophora fracta, for heavy metal ions (copper, zinc, cadmium, and mercury) was evaluated. The equilibrium adsorption capacities were 2.388?mg Cu²⁺, 1.623?mg Zn²⁺, 0.240?mg Cd²⁺, and 0.228?mg Hg²⁺ per gram of living algae at 18°C and pH?5.0. The removal efficiency for Cu²⁺, Zn²⁺, Cd²⁺, and Hg²⁺ were 99, 85, 97, and 98%, respectively. Greater removal efficiency was achieved when the concentrations of metal ions were at very low level. The results indicated that living algae are suitable for removal and recovery of heavy metal ions from aqueous solutions and can be a potential tool to treat industrial wastewater.     

Multi-metal biosorption and bioaccumulation by Exiguobacterium sp. ZM-2

The present work deals with the biosorption performance of dried and non-growing biomasses of Exiguobacterium sp. ZM-2, isolated from soil contaminated with tannery effluents, for the removal of Cd²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ from aqueous solution. The metal concentrations studied were 25 mg/l, 50 mg/l, 100 mg/l, 150 mg/l and 200 mg/l. The effect of solution pH and contact time was also studied. The biosorption capacity was significantly altered by pH of the solution. The removal of metal ions was conspicuously rapid; most of the total sorption occurred within 30 min. The sorption data have been analyzed and fitted to the Langmuir and Freundlich isotherm models. The highest Q_max value was found for the biosorption of Cd²⁺ at 43.5 mg/g in the presence of the non-growing biomass. Recovery of metals (Cd²⁺, Zn²⁺, Cu²⁺ and Ni²⁺) was found to be better when dried biomass was used in comparison to non-growing biomass. Metal removal through bioaccumulation was determined by growing the bacterial strain in nutrient broth amended with different concentrations of metal ions. This multi-metal resistant isolate could be employed for the removal of heavy metals from spent industrial effluents before discharging them into the environment.     

Alleviation of metal and BTEX inhibition on BTEX degradation using PVA-immobilized degrader: kinetic model of BTEX degradation

Alleviation of metal inhibition on BTEX degradation using PVA-immobilized degrader (Mycobacterium sp. CHXY119) was investigated. When BTEX of 29 mg L^?1 [B:T:E:X = 1:1:1:1 (mg)] was used, more than 99 % of BTEX was simultaneously degraded by the free cells within 170 h. In contrast, BTEX of 114–172 mg L^?1 seriously inhibited degradation. High concentrations of metals (Mn²⁺: 15, Ni²⁺: 10, and Zn²⁺: 10 mg L^?1) also strongly inhibited BTEX degradation by the free cells at BTEX of 29 mg L^?1. Immobilization of degraders alleviated the inhibition of BTEX and heavy metals at high concentrations. A modified non-competitive inhibition model well described the BTEX degradation by the free and immobilized cells in the absence and presence of metal ions (R ² = 0.92–0.99). The above results provide valuable information on treatment of metal-BTEX co-contaminated wastewater by the immobilized degrader.     

Studies on copper toxicity in nickel-resistant strains ofNeurospora crassa

Copper toxicity has been studied in three nickel-resistant strains ofNeurospora crassa (Ni^R1, Ni^R2, and Ni^R3). Ni^R1 and Ni^R2, but not Ni^R3, were two-to threefold more sensitive than the parent wild strain (N. crassa EM 5297a) to Cu²⁺ on a normal N medium. On a nitrate N medium, Cu²⁺ was 16-fold more toxic to Ni^R3 because of reduced synthesis of nitrite reductase; Ni^R1 and Ni^R2 were only fivefold more sensitive to Cu²⁺, and nitrite reductase synthesis was unaffected. Mn²⁺ reversed Cu²⁺ toxicity on normal N medium only, in all strains. Fe³⁺ counteracted Cu²⁺ toxicity on nitrate N medium also. It was shown that Cu²⁺ affected Fe³⁺ utilization for nitrite reductase synthesis in Ni^R3 only and that in these Ni²⁺-resistant strains, Fe³⁺ antagonized effects of Cu²⁺, but not of other toxic metal ions.     

The effect of heavy metals on microbial community structure of a sulfidogenic consortium in anaerobic semi-continuous stirred tank reactors

The effect of heavy metals on community structure of a heavy metal tolerant sulfidogenic consortium was evaluated by using a combination of denaturing gradient gel electrophoresis (DGGE) of 16S rRNA gene and dissimilatory sulfite reductase (dsrB) gene fragments, 16S rRNA gene cloning analysis and fluorescence in situ hybridization (FISH). For this purpose, four anaerobic semi-continuous stirred tank reactors (referred as R1–R4) were run in parallel for 12 weeks at heavy metal loading rates of 1.5, 3, 4.5 and 7.5 mg l^?1 d^?1 each of Cu²⁺, Ni²⁺, Zn²⁺, and Cr⁶⁺, respectively. The abundance ratio of Desulfovibrio vulgaris detected by FISH to total cell counts was consistent with the obtained results of cloning and DGGE. This indicated that D. vulgaris was dominant in all analyzed samples and played a key role in heavy metal removal in R1, R2, and R3. In contrast, after 4 weeks of operation of R4, a distinct biomass loss was observed and no positive hybridized cells were detected by specific probes for the domain Bacteria, sulfate-reducing bacteria and D. vulgris. High removal efficiencies of heavy metals were achieved in R1, R2 and R3 after 12 weeks, whereas the precipitation of heavy metals in R4 was significantly decreased after 4 weeks and almost not observed after 6 weeks of operation. In addition, the anaerobic bacteria, such as Pertrimonas sulfuriphila, Clostridium sp., Citrobacter amalonaticus, and Klebsiella sp., identified from DGGE bands and clone library were hypothesized as heavy metal resistant bacteria at a loading rate of 1.5 mg l^?1 d^?1 of Cu²⁺, Ni²⁺, Zn²⁺, and Cr^6+.     

Cu2+ Removal and recovery by Spi SORB: batch stirred and up-flow packed bed columnar reactor systems

The biosorption of Cu²⁺ by free and poly acrylamide gel (PAG) immobilized Spirulina platensis (SpiSORB) was characterized under batch and continuous packed bed columnar reaction systems. The biosorption of Cu²⁺ was shown to be highest at pH of 6.0 for both types of biomass. The PAG immobilization process did not interfere with the Cu²⁺ binding sites present on biomass leading to cent percent (ca. 250 mg g⁻¹ of dry biomass) retention of biosorption as compared to free cells. Transmission electron microscopy on Cu²⁺ localization revealed that majority of metal is being sequestered by the cell wall only. The infrared spectrum of metal treated S. platensis biomass indicated the possible involvement of amide, amino, and carboxyl groups in metal binding. Up-flow packed bed columnar reactor containing 2.0 g of PAG immobilized S. platensis shown a maximum of 143-fold volume reduction factor at the residence time of 4.6 min for Cu²⁺ alone and found to decrease dramatically when Zn²⁺ is present in a bimetallic solution.     

Adsorption of Ni2+ and Cu2+ using Bio-Mineral: Adsorption Isotherms and Mechanisms

Heavy metal pollution has become one of the most serious environmental pollution problems. This study aimed to determine the adsorption and desorption characteristics of Ni²⁺ and Cu²⁺ by bio-mineral which was induced by Bacillus subtilis, and to explore the effect of pH on adsorption characteristics. The results showed that the Langmuir model gave a better fit to the experimental data than the Freundlich model, which demonstrated the adsorption was of a single-molecule layer form. The maximum adsorption capacities of the bio-mineral for Ni²⁺ and Cu²⁺ were determined as 67.114 mg/g and 69.930 mg/g, respectively. The desorption rates of Ni²⁺ and Cu²⁺ were very low, especially for Ni²⁺ which was almost 0. Besides, the bio-mineral maintained high adsorption capability for metals ions within a wide pH range (pH ≥ 3). It did not show any new phases after adsorption of Ni²⁺ and Cu²⁺ tested by FTIR, indicating that the bio-mineral and heavy metal ions might mainly physically be adsorbed. The bio-mineral has a larger internal and external specific surface area, pore volume and colloidal properties which are beneficial for the adsorption of metals ions, but shows limits in desorption. This study provides a theoretical basis for the utilization of bio-mineral and opens a new perspective for the remediation of heavy metals pollution.     

Effect of metal ions (Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+ and Zn2+) and water coordination on the structure and properties of l-histidine and zwitterionic l-histidine

Interactions between metal ions and amino acids are common both in solution and in the gas phase. The effect of metal ions and water on the structure of l-histidine is examined. The effect of metal ions (Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Ni²⁺, Cu²⁺ and Zn²⁺) and water on structures of His·M(H₂O)m, m = 0.1 complexes have been determined theoretically employing density functional theories using extended basis sets. Of the five stable complexes investigated the relative stability of the gas-phase complexes computed with DFT methods (with one exception of K⁺ systems) suggest metallic complexes of the neutral l-histidine to be the most stable species. The calculations of monohydrated systems show that even one water molecule has a profound effect on the relative stability of individual complexes. Proton dissociation enthalpies and Gibbs energies of l-histidine in the presence of the metal cations Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ were also computed. Its gas-phase acidity considerably increases upon chelation. Of the Lewis acids investigated, the strongest affinity to l-histidine is exhibited by the Cu²⁺ cation. The computed Gibbs energies ΔG are negative, span a rather broad energy interval (from ?130 to ?1,300 kJ/mol), and upon hydration are appreciably lowered.     

Separation of hexahistidine fusion proteins with immobilized metal ion affinity chromatographic (IMAC) sorbents derived from MN+‐tacn and its derivatives

The capabilities of a new class of immobilized (im) metal ion chelate complexes (IMCCs), derived from 1,4,7‐triazacyclononane (tacn), bis(1,4,7‐triazacyclononyl) ethane (dtne) and bis(1,4,7‐triazacyclononyl)propane (dtnp) complexed with the borderline metal ions Cu²⁺, Ni²⁺, Zn²⁺, Mn²⁺, Co²⁺, and Cr³⁺, for the purification of proteins have been investigated. In particular, the binding behavior of a model protein, the C‐terminal hexahistidine tagged recombinant fusion protein Schistosoma japonicum glutathione S‐transferase‐Saccharomyces cerevisiae mitochondrial ATP synthase δ‐subunit (GST‐δATPase‐His₆), with these new immobilized metal ion affinity chromatographic (IMAC) sorbents was compared to the properties of a conventional sorbent, derived from immobilized Ni(II)‐nitrilotriacetic acid (im‐Ni²⁺‐NTA). Investigations using the recombinant GST‐δATPase‐His₆ and recombinant S. japonicum glutathione S‐transferase (GST) lacking a hexahistidine tag have confirmed that the C‐terminal tag hexahistidine residues were required for the binding process to occur with these IMAC systems. The results also confirm that recombinant fusion proteins such as GST‐δATPase‐His₆ can be isolated in high purity with these IMAC systems. Moreover, these new macrocyclic systems manifest different selectivity features as a function of pH or ionic strength when compared to the conventional, unconstrained iminodiacetic acid (IDA) or NTA chelating ligands, complexed with borderline metal ions such as Cu²⁺ or Ni²⁺, as IMAC systems. Biotechnol. Bioeng. 2009;103: 747–756. © 2009 Wiley Periodicals, Inc.     

Immobilized <Emphasis Type="Italic">Kluyveromyces marxianus</Emphasis> cells in carboxymethyl cellulose for production of ethanol from cheese whey: experimental and kinetic studies

Cheese whey fermentation to ethanol using immobilized Kluyveromyces marxianus cells was investigated in batch and continuous operation. In batch fermentation, the yeast cells were immobilized in carboxymethyl cellulose (CMC) polymer and also synthesized graft copolymer of CMC with N-vinyl-2-pyrrolidone, denoted as CMC-g-PVP, and the efficiency of the two developed cell entrapped beads for lactose fermentation to ethanol was examined. The yeast cells immobilized in CMC-g-PVP performed slightly better than CMC with ethanol production yields of 0.52 and 0.49 g ethanol/g lactose, respectively. The effect of supplementation of cheese whey with lactose (42, 70, 100 and 150 g/l) on fermentative performance of K. marxianus immobilized in CMC beads was considered and the results were used for kinetic studies. The first order reaction model was suitable to describe the kinetics of substrate utilization and modified Gompertz model was quite successful to predict the ethanol production. For continuous ethanol fermentation, a packed-bed immobilized cell reactor (ICR) was operated at several hydraulic retention times; HRTs of 11, 15 and 30 h. At the HRT of 30 h, the ethanol production yield using CMC beads was 0.49 g/g which implies that 91.07 % of the theoretical yield was achieved.     

The role of antioxidants enzymes of E. coli ASU3, a tolerant strain to heavy metals toxicity, in combating oxidative stress of copper

The current study describes the isolation and characterization of E. coli from wastewater that collected from El-Malah canal in Assiut, Egypt. Twelve isolates were investigated for heavy metal resistance by which one of them showed multiple metal resistances. Furthermore, the bacterium was identified as E. coli ASU3 according to biochemical tests and then, preserved at Assuit University Mycological Centre with accession number AUMC B83. It exhibited high minimal inhibitory concentrations for metals and antibiotic resistance. The order of metals toxicity to the bacterium was Cr⁶⁺ > Cu²⁺ > Co²⁺ > Pb²⁺ > Ni²⁺ > Cr³⁺ > Cd²⁺ > Zn²⁺. Total protein content of E. coli ASU3 decreased with the increase of copper concentration. Under exposure of different concentrations of copper, the induction of antioxidant enzymes such as catalase, peroxidase and ascorbate peroxidase was increased and these antioxidant enzymes can contribute to combating oxidative stresses.     

Selective binding of Ni2+ and Cu2+ metal ions with naphthazarin esters isolated from Arnebia euchroma

Naphthazarin esters (C1–C4) isolated from the roots of Arnebia euchroma are found as skilled dual chemosensors for Ni²⁺ and Cu²⁺ among Pb²⁺, Na²⁺, K²⁺, Hg²⁺, Mg²⁺, and Ca²⁺ metal ions. C1–C4 esters exhibited a red shift of 54 nm with Ni²⁺ and 30 nm with Cu²⁺ metal ions in absorption. There is a formation of red-shifted bands between 517 and 613 nm in the absorption spectrum of C1–C4 sensors on binding with Ni²⁺ and Cu²⁺ ions. The addition of Ni²⁺ and Cu²⁺ ions to sensors C1–C4 stimulates a remarkable color change from reddish pink to purple and light blue, respectively. These color changes can be identified with the naked eye. The significant downfield shifts of CO and OH peaks in nuclear magnetic resonance (NMR) spectrum confirm the chelation as binding mechanism. With ultraviolet–visble and NMR studies, it is found that C1–C4 esters possessed notable selectivity and sensitivity toward Ni²⁺ and Cu²⁺ over other metal ions.     

A membrane-free baffled microbial fuel cell for cathodic reduction of Cu(II) with electricity generation

A membrane-free baffled microbial fuel cell (MFC) was developed to treat synthetic Cu(II) sulfate containing wastewater in cathode chamber and synthetic glucose-containing wastewater fed to anode chamber. Maximum power density of 314 mW/m³ with columbic efficiency of 5.3% was obtained using initial Cu²⁺ concentration of 6400 mg/L. Higher current density favored the cathodic reduction of Cu²⁺, and removal of Cu²⁺ by 70% was observed within 144 h using initial concentration of 500 mg/L. Powder X-ray diffraction (XRD) analysis indicated that the Cu²⁺ was reduced to Cu₂O or Cu₂O plus Cu which deposited on the cathode, and the deficient cathodic reducibility resulted in the formation of Cu₄(OH)₆SO₄ at high initial Cu²⁺ concentration (500-6400 mg/L). This study suggested a novel low-cost approach to remove and recover Cu(II) from Cu²⁺-containing wastewater using MFC-type reactor.     

Accumulation of nickel ion (Ni2+) by immobilized cells ofEnterobacter species

Summary AnEnterobacter species, isolated from electroplating effluent, could remove significant amount of nickel ion (Ni²⁺) from growth medium and sewage effluent. In order to construct a bioreactor to remove Ni²⁺ from electroplating effluent, bacterial cells were immobilized in polyacrylamide beads. The highest removal capacity (RC, mg of Ni²⁺/g of dry cells) and removal efficiency (RE, % of added Ni²⁺ removed by bacterial cells) of Ni²⁺ of immobilized bacterial cells were obtained by optimizing the growth conditions for the bacterial cells such as the composition of the growth medium, incubation time and incubation temperature; and the operational parameters of the bioreactor such as retention time and pH of the Ni²⁺ containing solution, respectively.