The effect of chlorination degree and substitution pattern on the interactions of polychlorinated biphenyls with model bacterial membranes

Polychlorinated biphenyls (PCB) are persistent organic pollutants that due to their chemical resistivity and inflammability found multiple applications. In spite of the global ban for PCB production, due to their long half-lives periods, PCB accumulate in the soils, so effective bioremediation of the polluted lands is of crucial importance. Some of the 209 PCB congeners exhibit increased toxicity to soil bacteria and their presence impoverish the soil decomposer community and slows down the degradation of environmental pollutants in the soils. The exact mechanism of PCB antimicrobial activity is unknown, but it is strictly related with the membrane activity of PCB. Therefore, to shed light on these interactions we applied Langmuir monolayers formed by selected phospholipids as model bacterial membranes. In our studies we tested 5 PCB congeners differing in the degree of chlorination and the distribution of the chlorine substituents around the biphenyl frame. Special attention was paid to tetra-substituted PCB because of their increased presence in the environment and disubstituted PCB being their degradation products. To characterize the model membranes as Langmuir monolayers, we used surface pressure measurements, Brewster angle microscopy and Grazing Incidence X-ray Diffraction. It turned out that among the tetra-substituted PCB the ortho-substituted non-dioxin like compound was much more membrane destructive than the flat dioxin-like congener. On the contrary, among the di-substituted PCB the flat para-substituted 2,2′-dichlorobiphenyl turned out to exhibit high membrane activity.     

Recent advances in recombinant protein expression by Corynebacterium, Brevibacterium, and Streptomyces: from transcription and translation regulation to secretion pathway selection

Gram-positive bacteria are widely used to produce recombinant proteins, amino acids, organic acids, higher alcohols, and polymers. Many proteins have been expressed in Gram-positive hosts such as Corynebacterium, Brevibacterium, and Streptomyces. The favorable and advantageous characteristics (e.g., high secretion capacity and efficient production of metabolic products) of these species have increased the biotechnological applications of bacteria. However, owing to multiplicity from genes encoding the proteins and expression hosts, the expression of recombinant proteins is limited in Gram-positive bacteria. Because there is a very recent review about protein expression in Bacillus subtilis, here we summarize recent strategies for efficient expression of recombinant proteins in the other three typical Gram-positive bacteria (Corynebacterium, Brevibacterium, and Streptomyces) and discuss future prospects. We hope that this review will contribute to the development of recombinant protein expression in Corynebacterium, Brevibacterium, and Streptomyces.     

Comparison of bacteriocins production from Enterococcus faecium strains in cheese whey and optimised commercial MRS medium

The production of bacteriocins from cheap substrates could be useful for many food industrial applications. This study aimed at determining the conditions needed for optimal production of enterocins SD1, SD2, SD3 and SD4 secreted by Enterococcus faecium strains SD1, SD2, SD3 and SD4, respectively. To our knowledge, this is the first use of cheese whey—a low-cost milk by-product—as a substrate for bacteriocin production by E. faecium; skimmed milk and MRS broths were used as reference media. This cheese manufacturing residue proved to be a promising substrate for the production of bacteriocins. However, the levels of secreted antimicrobial compounds were lower than those achieved by E. faecium strains in MRS broth. Bacteriocin production was affected strongly by physical and chemical factors such as growth temperature, time of incubation, pH, and the chemical composition of the culture medium. The optimal temperature and time of incubation supporting the highest bacteriocin production was determined for each strain. Different types, sources and amounts of organic nitrogen, sugar, and inorganic salts played an essential role in bacteriocin secretion. E. faecium strains SD1 and SD2—producing high bacteriocin levels both in cheese whey and skimmed milk—could be of great interest for potential applications in cheese-making.     

Current biotechnological applications of the genus Amycolatopsis

Recently there has been increasing interest in possible biotechnological applications of the bacterial genus Amycolatopsis. This genus originally attracted attention for its antibiotic producing capabilities; although it is actually a multifaceted genus and a more diverse range of studies involving biotechnological processes have now been undertaken. Several works have demonstrated that the versatility shown by these bacteria is valuable in industrial applications. Here, we provide a condensed overview of the most important biotechnological applications such as bioremediation, biodegradation and bioconversion, as well as aspects that need to be explored further in order to gain a fuller insight into this genus, including its possible potential in the production of biofuel. Antibiotic production is not discussed since this is well covered by the latest edition of Bergey’s Manual of Systematic Bacteriology. To our knowledge this is the first report highlighting the versatility and biotechnological potential of the genus Amycolatopsis.     

Electron transport chains in organohalide-respiring bacteria and bioremediation implications

In situ remediation employing organohalide-respiring bacteria represents a promising solution for cleanup of persistent organohalide pollutants. The organohalide-respiring bacteria conserve energy by utilizing H₂ or organic compounds as electron donors and organohalides as electron acceptors. Reductive dehalogenase (RDase), a terminal reductase of the electron transport chain in organohalide-respiring bacteria, is the key enzyme that catalyzes halogen removal. Accumulating experimental evidence thus far suggests that there are distinct models for respiratory electron transfer in organohalide-respirers of different lineages, e.g., Dehalococcoides, Dehalobacter, Desulfitobacterium and Sulfurospirillum. In this review, to connect the knowledge in organohalide-respiratory electron transport chains to bioremediation applications, we first comprehensively review molecular components and their organization, together with energetics of the organohalide-respiratory electron transport chains, as well as recent elucidation of intramolecular electron shuttling and halogen elimination mechanisms of RDases. We then highlight the implications of organohalide-respiratory electron transport chains in stimulated bioremediation. In addition, major challenges and further developments toward understanding the organohalide-respiratory electron transport chains and their bioremediation applications are identified and discussed.     

Predictive modelling of Lactobacillus casei KN291 survival in fermented soy beverage

The aim of the study was to construct and verify predictive growth and survival models of a potentially probiotic bacteria in fermented soy beverage. The research material included natural soy beverage (Polgrunt, Poland) and the strain of lactic acid bacteria (LAB) — Lactobacillus casei KN291. To construct predictive models for the growth and survival of L. casei KN291 bacteria in the fermented soy beverage we design an experiment which allowed the collection of CFU data. Fermented soy beverage samples were stored at various temperature conditions (5, 10, 15, and 20°C) for 28 days. On the basis of obtained data concerning the survival of L. casei KN291 bacteria in soy beverage at different temperature and time conditions, two non-linear models (r ²= 0.68–0.93) and two surface models (r ²=0.76–0.79) were constructed; these models described the behaviour of the bacteria in the product to a satisfactory extent. Verification of the surface models was carried out utilizing the validation data — at 7°C during 28 days. It was found that applied models were well fitted and charged with small systematic errors, which is evidenced by accuracy factor — Af, bias factor — Bf and mean squared error — MSE. The constructed microbiological growth and survival models of L. casei KN291 in fermented soy beverage enable the estimation of products shelf life period, which in this case is defined by the requirement for the level of the bacteria to be above 10⁶ CFU/cm³. The constructed models may be useful as a tool for the manufacture of probiotic foods to estimate of their shelf life period.     

Biotransformation of 4-sec-butylphenol by Gram-positive bacteria of the genera Mycobacterium and Nocardia including modifications on the alkyl chain and the hydroxyl group

The environmental pollutant 4-sec-butylphenol (4-sec-BP) which possesses estrogenic properties was transformed by the aerobic Gram-positive bacteria Mycobacterium neoaurum and Nocardia cyriacigeorgica into three main products (P1–P3) which were isolated and structurally characterized in detail. Two of them were products of a process resembling anaerobic metabolism of alkylphenols based on modifications of the alkyl side chain of 4-sec-BP. The first product (P1) was identified as 4-(2-hydroxy-1-methylpropyl)-phenol. The second product P2 was isolated as a mixture of at least four structures which could be identified as I 4-sec-butylidenecyclohexa-2,5-dienone; II 4-(1-methylenepropyl)-phenol; III 4-(1-methylpropenyl)-phenol; and IV 4-(1-methylallyl)-phenol. In contrast to P1 and P2, the third product (P3) resulted from a modification of the hydroxyl group of 4-sec-BP. This product was only formed by M. neoaurum and was identified as the glucoside conjugate 4-sec-butylphenol-α-d-glucopyranoside. Since in general, fungi synthesize sugar conjugates to detoxify hazardous pollutants, the formation of this conjugate is a peculiarity of M. neoaurum. Thus, altogether, six products were formed from 4-sec-BP and different transformation pathways are introduced. The hydroxylating and glucosylating capacity of the characterized bacteria open up applications in environmental protection.     

Recent discoveries and applications of Anoxybacillus

The Bacillaceae family members are a good source of bacteria for bioprocessing and biotransformation involving whole cells or enzymes. In contrast to Bacillus and Geobacillus, Anoxybacillus is a relatively new genus that was proposed in the year 2000. Because these bacteria are alkali-tolerant thermophiles, they are suitable for many industrial applications. More than a decade after the first report of Anoxybacillus, knowledge accumulated from fundamental and applied studies suggests that this genus can serve as a good alternative in many applications related to starch and lignocellulosic biomasses, environmental waste treatment, enzyme technology, and possibly bioenergy production. This current review provides the first summary of past and recent discoveries regarding the isolation of Anoxybacillus, its medium requirements, its proteins that have been characterized and cloned, bioremediation applications, metabolic studies, and genomic analysis. Comparisons to some other members of Bacillaceae and possible future applications of Anoxybacillus are also discussed.     

Optimal cofactor swapping can increase the theoretical yield for chemical production in Escherichia coli and Saccharomyces cerevisiae

Maintaining cofactor balance is a critical function in microorganisms, but often the native cofactor balance does not match the needs of an engineered metabolic flux state. Here, an optimization procedure is utilized to identify optimal cofactor-specificity “swaps” for oxidoreductase enzymes utilizing NAD(H) or NADP(H) in the genome-scale metabolic models of Escherichia coli and Saccharomyces cerevisiae. The theoretical yields of all native carbon-containing molecules are considered, as well as theoretical yields of twelve heterologous production pathways in E. coli. Swapping the cofactor specificity of central metabolic enzymes (especially GAPD and ALCD2x) is shown to increase NADPH production and increase theoretical yields for native products in E. coli and yeast—including l-aspartate, l-lysine, l-isoleucine, l-proline, l-serine, and putrescine—and non-native products in E. coli—including 1,3-propanediol, 3-hydroxybutyrate, 3-hydroxypropanoate, 3-hydroxyvalerate, and styrene.     

Development of arbuscular mycorrhizal biotechnology and industry: current achievements and bottlenecks

Advanced scientific knowledge on arbuscular mycorrhizal symbioses recently enhanced potential for implementation of mycorrhizal biotechnology in horticulture and agriculture plant production, landscaping, phytoremediation and other segments of the plant market. The advances consist in significant findings regarding:—new molecular detection tools for tracing inoculated fungi in the field;—the coexistence mechanisms of various fungi in the single root system;—new knowledge on in vitro physiology of the AM fungi grown in root organ cultures;—mechanisms of synergistic interactions with other microbes like PGPR or saprotrophic fungi; discovery of mycorrhiza supportive compounds such as strigolactones. Scientific knowledge has been followed by technological developments like novel formulations for liquid applications or seed coating, mycorrhiza stimulating compounds or new application modes. Still the missing components of biotechnology are appropriate, cheap, highly reproducible and effective methods for inocula purity testing and quality control. Also there is a weak traceability of the origin of the mycorrhizal fungi strains used in commercial inocula. Numerous poor quality products can still be found on the markets claiming effective formation mycorrhiza which have very low capacity to do so. These products usually rely in their effects on plant growth not on support of host plants via formation of effective mycorrhizal symbiosis but on fertilizing compounds added to products. There is growing number of enterprises producing mycorrhiza based inocula recently not only in developed world but increasingly in emerging markets. Also collaboration between private sector and scientific community has an improving trend as the development of private sector can fuel further research activities. Last but not least there is apparent growing pull of the market and increasing tendency of reduction of agrochemical inputs and employment of alternative strategies in planting and plant production. These circumstances support further developments of mycorrhizal inocula production and applications and maturation of the industry.     

Characterization of Phragmites cummunis rhizosphere bacterial communities and metabolic products during the two stage sequential treatment of post methanated distillery effluent by bacteria and wetland plants

This study deals with the characterization of rhizosphere bacterial communities and metabolic products produced during the two stage sequential treatment of post methanated distillery effluent by bacteria and constructed wetland plants. Results showed that bacterial treatment followed by wetland plants (Phragmites cummunis) resulted 94.5% and 96.0% reduction in BOD and COD values, respectively. The PCR-RFLP analysis showed the presence of Stenotrophomonas, Enterobacter, Pantoea, Acinetobacter and Klebsiella sp., as dominant rhizosphere bacterial communities which play an important role in degradation and decolorization of PMDE in wetland treatment system. Further, the LC-MS-MS and other spectrophotometric analysis have shown that most of the pollutants detected in untreated PMDE were diminished from bacteria and wetland plant treated PMDE indicating that bacteria and wetland plant rhizosphere microbes utilized them as carbon, nitrogen and energy source. While, methylbenzene, furfuryl alcohol, and 4-vinyl-2-methoxyphenol were detected as metabolites in bacteria and hexadecanol in wetland plant rhizosphere treated PMDE.     

Metabolic engineering of Escherichia coli: A sustainable industrial platform for bio-based chemical production

In order to decrease carbon emissions and negative environmental impacts of various pollutants, more bulk and/or fine chemicals are produced by bioprocesses, replacing the traditional energy and fossil based intensive route. The Gram-negative rod-shaped bacterium, Escherichia coli has been studied extensively on a fundamental and applied level and has become a predominant host microorganism for industrial applications. Furthermore, metabolic engineering of E. coli for the enhanced biochemical production has been significantly promoted by the integrated use of recent developments in systems biology, synthetic biology and evolutionary engineering. In this review, we focus on recent efforts devoted to the use of genetically engineered E. coli as a sustainable platform for the production of industrially important biochemicals such as biofuels, organic acids, amino acids, sugar alcohols and biopolymers. In addition, representative secondary metabolites produced by E. coli will be systematically discussed and the successful strategies for strain improvements will be highlighted. Moreover, this review presents guidelines for future developments in the bio-based chemical production using E. coli as an industrial platform.     

Elevated CO2 atmosphere enhances production of defense-related flavonoids in soybean elicited by NO and a fungal elicitor

Increased atmospheric pollutants including carbon dioxide (CO₂) and nitric oxide (NO) have a large impact on vegetation, with detrimental or beneficial influences on plant growth and metabolism. Here, we evaluated the effect of an elevated CO₂ atmosphere on the production of soybean defensive secondary chemicals induced by NO and a fungal elicitor. We hypothesized that an excess of carbon may alter the production of specific flavonoids that were previously shown to be induced by NO in soybean cotyledons. Pots containing soybean seeds (Glycine max [L.] Merr.) were submitted to 380 and 760 μmol mol^?1 of atmospheric CO₂ in open-top chambers. After nine days, plantlets grown under these conditions were assessed for biochemical and physiological parameters. Defense-related flavonoids were evaluated in detached cotyledon diffusates elicited with two different NO donors and with the β-glucan elicitor from Phytophthora sojae. A CO₂-enriched atmosphere stimulated initial growth, photosynthetic assimilation, and an altered C/N ratio in soybean plantlets resulting in allocation of precursors into different branches of the phenylpropanoid pathway in the cotyledons. Under elevated CO₂, the biotic elicitor caused accumulation of phytoalexins (glyceollins) as the natural end products of the phenylpropanoid pathway. In contrast, elevated CO₂ combined with NO resulted in an increase of intermediates and diverted end products (daidzein—127%, coumestrol—93%, genistein—93%, luteolin—89% and apigenin—238%) with a concomitant increase of 1.5–3.0 times in the activity of enzymes related to their biosynthetic routes. These observations point to changes in the pool of defense-related flavonoids that are related to increased carbon availability in soybeans. This may alter the responsiveness of soybean plants to pathogens when they are grown in CO₂ atmospheric concentrations close to those predicted for the upcoming several decades.     

Valorization of CO2 through lithoautotrophic production of sustainable chemicals in Cupriavidus necator

Coupling recent advancements in genetic engineering of diverse microbes and gas-driven fermentation provides a path towards sustainable commodity chemical production. Cupriavidus necator H16 is a suitable species for this task because it effectively utilizes H₂ and CO₂ and is genetically tractable. Here, we demonstrate the versatility of C. necator for chemical production by engineering it to produce three products from CO₂ under lithotrophic conditions: sucrose, polyhydroxyalkanoates (PHAs), and lipochitooligosaccharides (LCOs). We engineered sucrose production in a co-culture system with heterotrophic growth 30 times that of WT C. necator. We engineered PHA production (20–60% DCW) and selectively altered product composition by combining different thioesterases and phaCs to produce copolymers directly from CO₂. And, we engineered C. necator to convert CO₂ into the LCO, a plant growth enhancer, with titers of ~1.4 mg/L—equivalent to yields in its native source, Bradyrhizobium. We applied the LCOs to germinating seeds as well as corn plants and observed increases in a variety of growth parameters. Taken together, these results expand our understanding of how a gas-utilizing bacteria can promote sustainable production.     

Diatom-associated bacteria are required for aggregation of Thalassiosira weissflogii

Aggregation of algae, mainly diatoms, is an important process in marine systems leading to the settling of particulate organic carbon predominantly in the form of marine snow. Exudation products of phytoplankton form transparent exopolymer particles (TEP), which acts as the glue for particle aggregation. Heterotrophic bacteria interacting with phytoplankton may influence TEP formation and phytoplankton aggregation. This bacterial impact has not been explored in detail. We hypothesized that bacteria attaching to Thalassiosira weissflogii might interact in a yet-to-be determined manner, which could impact TEP formation and aggregate abundance. The role of individual T. weissflogii-attaching and free-living new bacterial isolates for TEP production and diatom aggregation was investigated in vitro. T. weissflogii did not aggregate in axenic culture, and striking differences in aggregation dynamics and TEP abundance were observed when diatom cultures were inoculated with either diatom-attaching or free-living bacteria. The data indicated that free-living bacteria might not influence aggregation whereas bacteria attaching to diatom cells may increase aggregate formation. Interestingly, photosynthetically inactivated T. weissflogii cells did not aggregate regardless of the presence of bacteria. Comparison of aggregate formation, TEP production, aggregate sinking velocity and solid hydrated density revealed remarkable differences. Both, photosynthetically active T. weissflogii and specific diatom-attaching bacteria were required for aggregation. It was concluded that interactions between heterotrophic bacteria and diatoms increased aggregate formation and particle sinking and thus may enhance the efficiency of the biological pump.     

Optimisation of signal peptide for recombinant protein secretion in bacterial hosts

Escherichia coli—the powerhouse for recombinant protein production—is rapidly gaining status as a reliable and efficient host for secretory expression. An improved understanding of protein translocation processes and its mechanisms has inspired and accelerated the development of new tools and applications in this field and, in particular, a more efficient secretion signal. Several important characteristics and requirements are summarised for the design of a more efficient signal peptide for the production of recombinant proteins in E. coli. General approaches and strategies to optimise the signal peptide, including the selection and modification of the signal peptide components, are included. Several challenges in the secretory production of recombinant proteins are discussed, and research approaches designed to meet these challenges are proposed.     

Engineering of l-tyrosine oxidation in Escherichia coli and microbial production of hydroxytyrosol

The hydroxylation of tyrosine is an important reaction in the biosynthesis of many natural products. The use of bacteria for this reaction has not been very successful due to either the over-oxidation to ortho-quinone when using tyrosinases from bacteria or plants, or the lack of the native cofactor, tetrahydrobiopterin (BH4), needed for the activity of tyrosine hydroxylases (TH). Here, we demonstrate that an Escherichia coli cofactor, tetrahydromonapterin (MH4), can be used as an alternative cofactor for TH in presence of the BH4 regeneration pathway, and tyrosine hydroxylation is performed without over-oxidation. We used this platform for biosynthesis of one of the most powerful antioxidants, hydroxytyrosol. An endogenous aromatic aldehyde oxidase was identified and knocked out to prevent formation of the side product, and this resulted in nearly exclusive production of hydroxytyrosol in engineered E. coli. Finally, hydroxytyrosol production from a simple sugar as a sole carbon source was demonstrated.     

Unlocking the biosynthesis of sesquiterpenoids from methane via the methylerythritol phosphate pathway in methanotrophic bacteria,using α-humulene as a model compound

Isoprenoids are an abundant and diverse class of natural products with various applications in the pharmaceutical, cosmetics and biofuel industries. A methanotroph-based biorefinery is an attractive scenario for the production of a variety of value-added compounds from methane, because methane is a promising alternative feedstock for industrial biomanufacturing. In this study, we metabolically engineered Methylotuvimicrobium alcaliphilum 20Z for de novo synthesis of a sesquiterpenoid from methane, using α-humulene as a model compound, via optimization of the native methylerythritol phosphate (MEP) pathway. Expression of codon-optimized α-humulene synthase from Zingiber zerumbet in M. alcaliphilum 20Z resulted in an initial yield of 0.04 mg/g dry cell weight. Overexpressing key enzymes (IspA, IspG, and Dxs) for debottlenecking of the MEP pathway increased α-humulene production 5.2-fold compared with the initial strain. Subsequently, redirecting the carbon flux through the Embden–Meyerhof–Parnas pathway resulted in an additional 3-fold increase in α-humulene production. Additionally, a genome-scale model using flux scanning based on enforced objective flux method was used to identify potential overexpression targets to increase flux towards isoprenoid production. Several target reactions from cofactor synthesis pathways were probed and evaluated for their effects on α-humulene synthesis, resulting in α-humulene yield up to 0.75 mg/g DCW with 18.8-fold enhancement from initial yield. This study first demonstrates production of a sesquiterpenoid from methane using methanotrophs as the biocatalyst and proposes potential strategies to enhance production of sesquiterpenoid and related isoprenoid products in engineered methanotrophic bacteria.     

Structural characterization of a D-isomer specific 2-hydroxyacid dehydrogenase from Lactobacillus delbrueckii ssp. bulgaricus

Hydroxyacid dehydrogenases, responsible for the stereospecific conversion of 2-keto acids to 2-hydroxyacids in lactic acid producing bacteria, have a range of biotechnology applications including antibiotic synthesis, flavor development in dairy products and the production of valuable synthons. The genome of Lactobacillus delbrueckii ssp. bulgaricus, a member of the heterogeneous group of lactic acid bacteria, encodes multiple hydroxyacid dehydrogenases whose structural and functional properties remain poorly characterized. Here, we report the apo and coenzyme NAD⁺ complexed crystal structures of the L. bulgaricus D-isomer specific 2-hydroxyacid dehydrogenase, D2-HDH. Comparison with closely related members of the NAD-dependent dehydrogenase family reveals that whilst the D2-HDH core fold is structurally conserved, the substrate-binding site has a number of non-canonical features that may influence substrate selection and thus dictate the physiological function of the enzyme.     

Bacterial biofilms and quorum sensing: fidelity in bioremediation technology

Increased contamination of the environment with toxic pollutants has paved the way for efficient strategies which can be implemented for environmental restoration. The major problem with conventional methods used for cleaning of pollutants is inefficiency and high economic costs. Bioremediation is a growing technology having advanced potential of cleaning pollutants. Biofilm formed by various micro-organisms potentially provide a suitable microenvironment for efficient bioremediation processes. High cell density and stress resistance properties of the biofilm environment provide opportunities for efficient metabolism of number of hydrophobic and toxic compounds. Bacterial biofilm formation is often regulated by quorum sensing (QS) which is a population density-based cell–cell communication process via signaling molecules. Numerous signaling molecules such as acyl homoserine lactones, peptides, autoinducer-2, diffusion signaling factors, and α-hydroxyketones have been studied in bacteria. Genetic alteration of QS machinery can be useful to modulate vital characters valuable for environmental applications such as biofilm formation, biosurfactant production, exopolysaccharide synthesis, horizontal gene transfer, catabolic gene expression, motility, and chemotaxis. These qualities are imperative for bacteria during degradation or detoxification of any pollutant. QS signals can be used for the fabrication of engineered biofilms with enhanced degradation kinetics. This review discusses the connection between QS and biofilm formation by bacteria in relation to bioremediation technology.