Microscale and molecular assessment of impacts of nickel, nutrients, and oxygen level on structure and function of river biofilm communities

Studies were carried out to assess the influence of nutrients, dissolved oxygen (DO) concentration, and nickel (Ni) on river biofilm development, structure, function, and community composition. Biofilms were cultivated in rotating annular reactors with river water at a DO concentration of 0.5 or 7.5 mg liter(-1), with or without a combination of carbon, nitrogen, and phosphorus (CNP) and with or without Ni at 0.5 mg liter(-1). The effects of Ni were apparent in the elimination of cyanobacterial populations and reduced photosynthetic biomass in the biofilm. Application of lectin-binding analyses indicated changes in exopolymer abundance and a shift in the glycoconjugate makeup of the biofilms, as well as in the response to all treatments. Application of the fluorescent live-dead staining (BacLight Live-Dead staining kit; Molecular Probes, Eugene, Oreg.) indicated an increase in the ratio of live to dead cells under low-oxygen conditions. Nickel treatments had 50 to 75% fewer 'live' cells than their corresponding controls. Nickel at 0.5 mg liter(-1) corresponding to the industrial release rate concentration for nickel resulted in reductions in carbon utilization spectra relative to control and CNP treatments without nickel. In these cases, the presence of nickel eliminated the positive influence of nutrients on the biofilm. Other culture-dependent analyses (plate counts and most probable number) revealed no significant treatment effect on the biofilm communities. In the presence of CNP and at both DO levels, Ni negatively affected denitrification but had no effect on hexadecane mineralization or sulfate reduction. Analysis of total community DNA indicated abundant eubacterial 16S ribosomal DNA (rDNA), whereas Archaea were not detected. Amplification of the alkB gene indicated a positive effect of CNP and a negative effect of Ni. The nirS gene was not detected in samples treated with Ni at 0.5 mg liter(-1), indicating a negative effect on specific populations of bacteria, such as denitrifiers, resulting in a reduction in diversity. Denaturing gradient gel electrophoresis revealed that CNP had a beneficial impact on biofilm bacterial diversity at high DO concentrations, but none at low DO concentrations, and that the negative effect of Ni on diversity was similar at both DO concentrations. Notably, Ni resulted in the appearance of unique bands in 16S rDNA from Ni, DO, and CNP treatments. Sequencing results confirmed that the bands belonged to bacteria originating from freshwater and marine environments or from agricultural soils and industrial effluents. The observations indicate that significant interactions occur between Ni, oxygen, and nutrients and that Ni at 0.5 mg liter(-1) may have significant impacts on river microbial community diversity and function.     

Effects of Glucose Concentrations on Cadmium, Copper, Mercury, and Zinc Toxicity to a Klebsiella sp

The influence of glucose concentration on Cd, Cu, Hg, and Zn toxicity to a Klebsiella sp. was studied by following the degradation of ¹⁴C-labeled glucose at pH 6.0. Uptake of ¹⁴C into the cells was also determined. The carbon concentrations ranged from 0.01 to 40 mg liter⁻¹, which are equivalent to soluble C concentrations in natural environments. The toxicity of Cu, Cd, and Zn to a Klebsiella sp. was affected considerably by the C concentration. Copper at 10⁻⁵ M was toxic when the carbon concentration was 10 or 40 mg liter⁻¹, while at 0.01 to 1.0 mg liter⁻¹ no toxicity was observed. Cadmium and zinc were toxic at 10⁻² M in media containing 0.01 to 1.0 mg of C liter⁻¹. At C concentrations greater than 1.0 mg liter⁻¹, the inhibition of glucose degradation and carbon assimilation was observed at 10⁻³ M Cd and Zn. The toxicity of mercury seemed to be independent of the C concentration. Results of this study showed that the nutritional state of an organism may have a profound effect on its sensitivity to metals. Metals taken up by an energy-driven transport system may be less toxic under conditions of C starvation. The C concentration should be taken into account when evaluating results from toxicity studies, especially as most microorganisms in nature live under energy-limited conditions.     

Factors Influencing Expression of luxCDABE and nah Genes in Pseudomonas putida RB1353(NAH7, pUTK9) in Dynamic Systems

Bioluminescent reporter organisms have been successfully exploited as analytical tools for in situ determination of bioavailable levels of contaminants in static environmental samples. Continued characterization and development of such reporter systems is needed to extend the application of these bioreporters to in situ monitoring of degradation in dynamic environmental systems. In this study, the naphthalene-degrading, lux bioreporter bacterium Pseudomonas putida RB1353 was used to evaluate the relative influences of cell growth stage, cell density, substrate concentration, oxygen tension, and background carbon substrates on both the magnitude of the light response and the rate of salicylate disappearance. The effect of these variables on the lag time required to obtain maximum luminescence and degradation was also monitored. Strong correlations were observed between the first three factors and both the magnitude and induction time of luminescence and degradation rate. The maximum luminescence response to nonspecific background carbon substrates (soil extract broth or Luria broth) was 50% lower than that generated in response to 1 mg of sodium salicylate liter⁻¹. Oxygen tension was evaluated over the range of 0.5 to 40 mg liter⁻¹, with parallel inhibition to luminescence and degradation rate (20 mg of sodium salicylate liter⁻¹) observed at 1.5 mg liter⁻¹ and below and no effect observed above 5 mg liter⁻¹. Oxygen tensions from 2 to 4 mg liter⁻¹ influenced the magnitude of luminescence but not the salicylate degradation rate. The results suggest that factors causing parallel shifts in the magnitude of both luminescence and degradation rate were influencing regulation of the nah operon promoters. For factors that cause nonparallel shifts, other regulatory mechanisms are explored. This study demonstrates that lux reporter bacteria can be used to monitor both substrate concentration and metabolic response in dynamic systems. However, each lux reporter system and application will require characterization and calibration.     

Environmental Dissolved Organic Matter Governs Biofilm Formation and Subsequent Linuron Degradation Activity of a Linuron-Degrading Bacterial Consortium

It was examined whether biofilm growth on dissolved organic matter (DOM) of a three-species consortium whose members synergistically degrade the phenylurea herbicide linuron affected the consortium''s integrity and subsequent linuron-degrading functionality. Citrate as a model DOM and three environmental DOM (eDOM) formulations of different quality were used. Biofilms developed with all DOM formulations, and the three species were retained in the biofilm. However, biofilm biomass, species composition, architecture, and colocalization of member strains depended on DOM and its biodegradability. To assess the linuron-degrading functionality, biofilms were subsequently irrigated with linuron at 10 mg liter⁻¹ or 100 μg liter⁻¹. Instant linuron degradation, the time needed to attain maximal linuron degradation, and hence the total amount of linuron removed depended on both the DOM used for growth and the linuron concentration. At 10 mg liter⁻¹, the final linuron degradation efficiency was as high as previously observed without DOM except for biofilms fed with humic acids which did not degrade linuron. At 100 μg liter⁻¹ linuron, DOM-grown biofilms degraded linuron less efficiently than biofilms receiving 10 mg liter⁻¹ linuron. The amount of linuron removed was more correlated with biofilm species composition than with biomass or structure. Based on visual observations, colocalization of consortium members in biofilms after the DOM feed appears essential for instant linuron-degrading activity and might explain the differences in overall linuron degradation. The data show that DOM quality determines biofilm structure and composition of the pesticide-degrading consortium in periods with DOM as the main carbon source and can affect subsequent pesticide-degrading activity, especially at micropollutant concentrations.     

Changes in Microbial Biofilm Communities during Colonization of Sewer Systems

The coexistence of sulfate-reducing bacteria (SRB) and methanogenic archaea (MA) in anaerobic biofilms developed in sewer inner pipe surfaces favors the accumulation of sulfide (H₂S) and methane (CH₄) as metabolic end products, causing severe impacts on sewerage systems. In this study, we investigated the time course of H₂S and CH₄ production and emission rates during different stages of biofilm development in relation to changes in the composition of microbial biofilm communities. The study was carried out in a laboratory sewer pilot plant that mimics a full-scale anaerobic rising sewer using a combination of process data and molecular techniques (e.g., quantitative PCR [qPCR], denaturing gradient gel electrophoresis [DGGE], and 16S rRNA gene pyrotag sequencing). After 2 weeks of biofilm growth, H₂S emission was notably high (290.7 ± 72.3 mg S-H₂S liter⁻¹ day⁻¹), whereas emissions of CH₄ remained low (17.9 ± 15.9 mg COD-CH₄ liter⁻¹ day⁻¹). This contrasting trend coincided with a stable SRB community and an archaeal community composed solely of methanogens derived from the human gut (i.e., Methanobrevibacter and Methanosphaera). In turn, CH₄ emissions increased after 1 year of biofilm growth (327.6 ± 16.6 mg COD-CH₄ liter⁻¹ day⁻¹), coinciding with the replacement of methanogenic colonizers by species more adapted to sewer conditions (i.e., Methanosaeta spp.). Our study provides data that confirm the capacity of our laboratory experimental system to mimic the functioning of full-scale sewers both microbiologically and operationally in terms of sulfide and methane production, gaining insight into the complex dynamics of key microbial groups during biofilm development.     

Aerobic Fermentation of D-Xylose to Ethanol by Clavispora sp

Eleven strains of an undescribed species of Clavispora fermented D-xylose directly to ethanol under aerobic conditions. Strain UWO(PS)83-877-1 was grown in a medium containing 2% D-xylose and 0.5% yeast extract, and the following results were obtained: ethanol yield coefficient (ethanol/D-xylose), 0.29 g g⁻¹ (57.4% of theoretical); cell yield coefficient (dry biomass/D-xylose), 0.25 g g⁻¹; maximum ethanol concentration, 5.9 g liter⁻¹; maximum volumetric ethanol productivity, 0.11 g liter⁻¹ h⁻¹. With initial D-xylose concentrations of 40, 60, and 80 g liter⁻¹, maximum ethanol concentrations of 8.8, 10.9, and 9.8 g liter⁻¹ were obtained, respectively (57.2, 57.1, and 48.3% of theoretical). Ethanol was found to inhibit the fermentation of D-xylose (K_p = 0.58 g liter⁻¹) more than the fermentation of glucose (K_p = 6.5 g liter⁻¹). The performance of this yeast compared favorably with that reported for some other D-xylose-fermenting yeasts.     

Continuous and Batch Production of Chloroperoxidase by Mycelial Pellets of Caldariomyces fumago in an Airlift Fermentor

Batch and continuous production of the extracellular heme glycoprotein chloroperoxidase (CPO) was studied with an airlift fermentor. We induced Caldariomyces fumago CMI 89362 to form pellets by transferring a small inoculum volume in preculture prior to growth in a 1-liter fermentor. Continuous replacement of the fructose-salts medium (dilution rate, 0.008 h⁻¹) supported continuous CPO formation at an average concentration of 128 ± 10 mg of CPO liter⁻¹ for 8 days. Optimum CPO production rates averaged 1.2 ± 0.1 mg of CPO h⁻¹ at dilution rates below 0.033 h⁻¹. Varying the carbohydrate content of the feed solution or the time of starting the feed did not significantly alter the amount of CPO produced. Batch fermentation in the airlift fermentor resulted in maximum CPO concentrations of 280 ± 80 mg of CPO liter⁻¹, although on two separate occasions CPO concentrations reached 400 to 450 mg liter⁻¹, which was double the amount obtained by free hyphae in shake flask culture.     

Protozoan Bacterivory and Escherichia coli Survival in Drinking Water Distribution Systems

The development of bacterial communities in drinking water distribution systems leads to a food chain which supports the growth of macroorganisms incompatible with water quality requirements and esthetics. Nevertheless, very few studies have examined the microbial communities in drinking water distribution systems and their trophic relationships. This study was done to quantify the microbial communities (especially bacteria and protozoa) and obtain direct and indirect proof of protozoan feeding on bacteria in two distribution networks, one of GAC water (i.e., water filtered on granular activated carbon) and the other of nanofiltered water. The nanofiltered water-supplied network contained no organisms larger than bacteria, either in the water phase (on average, 5 × 10⁷ bacterial cells liter⁻¹) or in the biofilm (on average, 7 × 10⁶ bacterial cells cm⁻²). No protozoa were detected in the whole nanofiltered water-supplied network (water plus biofilm). In contrast, the GAC water-supplied network contained bacteria (on average, 3 × 10⁸ cells liter⁻¹ in water and 4 × 10⁷ cells cm⁻² in biofilm) and protozoa (on average, 10⁵ cells liter⁻¹ in water and 10³ cells cm⁻² in biofilm). The water contained mostly flagellates (93%), ciliates (1.8%), thecamoebae (1.6%), and naked amoebae (1.1%). The biofilm had only ciliates (52%) and thecamoebae (48%). Only the ciliates at the solid-liquid interface of the GAC water-supplied network had a measurable grazing activity in laboratory test (estimated at 2 bacteria per ciliate per h). Protozoan ingestion of bacteria was indirectly shown by adding Escherichia coli to the experimental distribution systems. Unexpectedly, E. coli was lost from the GAC water-supplied network more rapidly than from the nanofiltered water-supplied network, perhaps because of the grazing activity of protozoa in GAC water but not in nanofiltered water. Thus, the GAC water-supplied network contained a functional ecosystem with well-established and structured microbial communities, while the nanofiltered water-supplied system did not. The presence of protozoa in drinking water distribution systems must not be neglected because these populations may regulate the autochthonous and allochthonous bacterial populations.     

Polysaccharides and Proteins Added to Flowing Drinking Water at Microgram-per-Liter Levels Promote the Formation of Biofilms Predominated by Bacteroidetes and Proteobacteria

Biopolymers are important substrates for heterotrophic bacteria in (ultra)oligotrophic freshwater environments, but information about their utilization at microgram-per-liter levels by attached freshwater bacteria is lacking. This study aimed at characterizing biopolymer utilization in drinking-water-related biofilms by exposing such biofilms to added carbohydrates or proteins at 10 μg C liter⁻¹ in flowing tap water for up to 3 months. Individually added amylopectin was not utilized by the biofilms, whereas laminarin, gelatin, and caseinate were. Amylopectin was utilized during steady-state biofilm growth with simultaneously added maltose but not with simultaneously added acetate. Biofilm formation rates (BFR) at 10 μg C liter⁻¹ per substrate were ranked as follows, from lowest to highest: blank or amylopectin (≤6 pg ATP cm⁻² day⁻¹), gelatin or caseinate, laminarin, maltose, acetate alone or acetate plus amylopectin, and maltose plus amylopectin (980 pg ATP cm⁻² day⁻¹). Terminal restriction fragment length polymorphism (T-RFLP) and 16S rRNA gene sequence analyses revealed that the predominant maltose-utilizing bacteria also dominated subsequent amylopectin utilization, indicating catabolic repression and (extracellular) enzyme induction. The accelerated BFR with amylopectin in the presence of maltose probably resulted from efficient amylopectin binding to and hydrolysis by inductive enzymes attached to the bacterial cells. Cytophagia, Flavobacteriia, Gammaproteobacteria, and Sphingobacteriia grew during polysaccharide addition, and Alpha-, Beta-, and Gammaproteobacteria, Cytophagia, Flavobacteriia, and Sphingobacteriia grew during protein addition. The succession of bacterial populations in the biofilms coincided with the decrease in the specific growth rate during biofilm formation. Biopolymers can clearly promote biofilm formation at microgram-per-liter levels in drinking water distribution systems and, depending on their concentrations, might impair the biological stability of distributed drinking water.     

Influence of Growth Mode and Sucrose on Susceptibility of Streptococcus sanguis to Amine Fluorides and Amine Fluoride-Inorganic Fluoride Combinations

This study evaluated the susceptibility to amine fluorides (AmFs) of planktonic and biofilm cultures of Streptococcus sanguis grown with and without sucrose. Cultures were incubated with AmFs (250 mg of fluoride liter⁻¹) for 1 min. The susceptibility of biofilms was less than that of the planktonic form and was further decreased by growth in the presence of sucrose.     

Assessing Phytoplankton and Bacterioplankton Production During Early Spring in Lake Erken, Sweden

The spring development of both phytoplankton and bacterioplankton was investigated between 18 April and 7 May 1983 in mesotrophic Lake Erken, Sweden. By using the lake as a batch culture, our aim was to estimate, via different methods, the production of phytoplankton and bacterioplankton in the lake and to compare these production estimates with the actual increase in phytoplankton and bacterioplankton biomass. The average water temperature was 3.5°C. Of the phytoplankton biomass, >90% was the diatom Stephanodiscus hantzchii var. pusillus, by the peak of the bloom. The ¹⁴C and O₂ methods of estimating primary production gave equivalent results (r = 0.999) with a photosynthetic quotient of 1.63. The theoretical photosynthetic quotient predicted from the C/NO₃ N assimilation ratio was 1.57. The total integrated incorporation of [¹⁴C]bicarbonate into particulate material (>1 μm) was similar to the increase in phytoplankton carbon determined from cell counts. Bacterioplankton increased from 0.5 × 10⁹ to 1.52 × 10⁹ cells liter⁻¹ (~0.5 μg of C liter⁻¹ day⁻¹). Estimates of bacterioplankton production from rates of [³H]thymidine incorporation were ca. 1.2 to 1.7 μg of C liter⁻¹ day⁻¹. Bacterial respiration, measured by a high-precision Winkler technique, was estimated as 4.8 μg of C liter⁻¹ day⁻¹, indicating a bacterial growth yield of 25%. The bulk of the bacterioplankton production was accounted for by algal extracellular products. Gross bacterioplankton production (production plus respiration) was 20% of gross primary production, per square meter of surface area. We found no indication that bacterioplankton production was underestimated by the [³H]thymidine incorporation method.     

An Outbreak of Nonflocculating Catabolic Populations Caused the Breakdown of a Phenol-Digesting Activated-Sludge Process

Activated sludge was fed phenol as the sole carbon source, and the phenol-loading rate was increased stepwise from 0.5 to 1.0 g liter⁻¹ day⁻¹ and then to 1.5 g liter⁻¹ day⁻¹. After the loading rate was increased to 1.5 g liter⁻¹ day⁻¹, nonflocculating bacteria outgrew the sludge, and the activated-sludge process broke down within 1 week. The bacterial population structure of the activated sludge was analyzed by temperature gradient gel electrophoresis (TGGE) of PCR-amplified 16S ribosomal DNA (rDNA) fragments. We found that the population diversity decreased as the phenol-loading rate increased and that two populations (designated populations R6 and R10) predominated in the sludge during the last several days before breakdown. The R6 population was present under the low-phenol-loading-rate conditions, while the R10 population was present only after the loading rate was increased to 1.5 g liter⁻¹ day⁻¹. A total of 41 bacterial strains with different repetitive extragenic palindromic sequence PCR patterns were isolated from the activated sludge under different phenol-loading conditions, and the 16S rDNA and gyrB fragments of these strains were PCR amplified and sequenced. Some bacterial isolates could be associated with major TGGE bands by comparing the 16S rDNA sequences. All of the bacterial strains affiliated with the R6 population had almost identical 16S rDNA sequences, while the gyrB phylogenetic analysis divided these strains into two physiologically divergent groups; both of these groups of strains could grow on phenol, while one group (designated the R6F group) flocculated in laboratory media and the other group (the R6T group) did not. A competitive PCR analysis in which specific gyrB sequences were used as the primers showed that a population shift from R6F to R6T occurred following the increase in the phenol-loading rate to 1.5 g liter⁻¹ day⁻¹. The R10 population corresponded to nonflocculating phenol-degrading bacteria. Our results suggest that an outbreak of nonflocculating catabolic populations caused the breakdown of the activated-sludge process. This study also demonstrated the usefulness of gyrB-targeted fine population analyses in microbial ecology.     

Toxic Effects of Linear Alkylbenzene Sulfonate on Metabolic Activity, Growth Rate, and Microcolony Formation of Nitrosomonas and Nitrosospira Strains

Strong inhibitory effects of the anionic surfactant linear alkylbenzene sulfonate (LAS) on four strains of autotrophic ammonia-oxidizing bacteria (AOB) are reported. Two Nitrosospira strains were considerably more sensitive to LAS than two Nitrosomonas strains were. Interestingly, the two Nitrosospira strains showed a weak capacity to remove LAS from the medium. This could not be attributed to adsorption or any other known physical or chemical process, suggesting that biodegradation of LAS took place. In each strain, the metabolic activity (50% effective concentration [EC₅₀], 6 to 38 mg liter⁻¹) was affected much less by LAS than the growth rate and viability (EC₅₀, 3 to 14 mg liter⁻¹) were. However, at LAS levels that inhibited growth, metabolic activity took place only for 1 to 5 days, after which metabolic activity also ceased. The potential for adaptation to LAS exposure was investigated with Nitrosomonas europaea grown at a sublethal LAS level (10 mg liter⁻¹); compared to control cells, preexposed cells showed severely affected cell functions (cessation of growth, loss of viability, and reduced NH₄⁺ oxidation activity), demonstrating that long-term incubation at sublethal LAS levels was also detrimental. Our data strongly suggest that AOB are more sensitive to LAS than most heterotrophic bacteria are, and we hypothesize that thermodynamic constraints make AOB more susceptible to surfactant-induced stress than heterotrophic bacteria are. We further suggest that AOB may comprise a sensitive indicator group which can be used to determine the impact of LAS on microbial communities.     

Influence of Sulfide and Temperature on Species Composition and Community Structure of Hot Spring Microbial Mats

In solfataric fields in southwestern Iceland, neutral and sulfide-rich hot springs are characterized by thick bacterial mats at 60 to 80°C that are white or yellow from precipitated sulfur (sulfur mats). In low-sulfide hot springs in the same area, grey or pink streamers are formed at 80 to 90°C, and a Chloroflexus mat is formed at 65 to 70°C. We have studied the microbial diversity of one sulfur mat (high-sulfide) hot spring and one Chloroflexus mat (low-sulfide) hot spring by cloning and sequencing of small-subunit rRNA genes obtained by PCR amplification from mat DNA. Using 98% sequence identity as a cutoff value, a total of 14 bacterial operational taxonomic units (OTUs) and 5 archaeal OTUs were detected in the sulfur mat; 18 bacterial OTUs were detected in the Chloroflexus mat. Although representatives of novel divisions were found, the majority of the sequences were >95% related to currently known sequences. The molecular diversity analysis showed that Chloroflexus was the dominant mat organism in the low-sulfide spring (1 mg liter⁻¹) below 70°C, whereas Aquificales were dominant in the high-sulfide spring (12 mg liter⁻¹) at the same temperature. Comparison of the present data to published data indicated that there is a relationship between mat type and composition of Aquificales on the one hand and temperature and sulfide concentration on the other hand.     

Continuous Synthesis and Excretion of the Compatible Solute Ectoine by a Transgenic, Nonhalophilic Bacterium

The compatible solute 1,4,5,6-tetrahydro-2-methyl-4-pyrimidinecarboxylic acid (ectoine) acts in microorganisms as an osmotic counterweight against halostress and has attracted commercial attention as a protecting agent. Its production and application are restricted by the drawbacks of the discontinuous harvesting procedure involving salt shocks, which reduces volumetric yield, increases reactor corrosion, and complicates downstream processing. In order to synthesize ectoine continuously in less-aggressive media, we introduced the ectoine genes ectABC of the halophilic bacterium Chromohalobacter salexigens into an Escherichia coli strain using the expression vector pASK-IBA7. Under the control of a tet promoter, the transgenic E. coli synthesized 6 g liter⁻¹ ectoine with a space-time yield of 40 mg liter⁻¹ h⁻¹, with the vast majority of the ectoine being excreted.     

Methods for Intense Aeration, Growth, Storage, and Replication of Bacterial Strains in Microtiter Plates

Miniaturized growth systems for heterogeneous culture collections are not only attractive in reducing demands for incubation space and medium but also in making the parallel handling of large numbers of strains more practicable. We report here on the optimization of oxygen transfer rates in deep-well microtiter plates and the development of a replication system allowing the simultaneous and reproducible sampling of 96 frozen glycerol stock cultures while the remaining culture volume remains frozen. Oxygen transfer rates were derived from growth curves of Pseudomonas putida and from rates of oxygen disappearance due to the cobalt-catalyzed oxidation of sulfite. Maximum oxygen transfer rates (38 mmol liter⁻¹ h⁻¹, corresponding to a mass transfer coefficient of 188 h⁻¹) were measured during orbital shaking at 300 rpm at a shaking diameter of 5 cm and a culture volume of 0.5 ml. A shaking diameter of 2.5 cm resulted in threefold-lower values. These high oxygen transfer rates allowed P. putida to reach a cell density of approximately 9 g (dry weight) liter⁻¹ during growth on a glucose mineral medium at culture volumes of up to 1 ml. The growth-and-replication system was evaluated for a culture collection consisting of aerobic strains, mainly from the genera Pseudomonas, Rhodococcus, and Alcaligenes, using mineral media and rich media. Cross-contamination and excessive evaporation during vigorous aeration were adequately prevented by the use of a sandwich cover of spongy silicone and cotton wool on top of the microtiter plates.     

Primary and Bacterial Secondary Production in a Southwestern Reservoir

Rates of primary and bacterial secondary production in Lake Arlington, Texas, were determined. The lake is a warm (annual temperature range, 7 to 32°C), shallow, monomictic reservoir with limited macrophyte development in the littoral zone. Samples were collected from six depths within the photic zone from a site located over the deepest portion of the lake. Primary production and bacterial production were calculated from NaH¹⁴CO₃ and [methyl-³H]thymidine incorporation, respectively. Peak instantaneous production ranged between 14.8 and 220.5 μg of C liter⁻¹ h⁻¹. There were two distinct periods of high rates of production. From May through July, production near the metalimnion exceeded 100 μg of C liter⁻¹ h⁻¹. During holomixis, production throughout the water column was in excess of 100 μg of C liter⁻¹ h⁻¹ and above 150 μg of C liter⁻¹ h⁻¹ near the surface. Annual areal primary production was 588 g of C m⁻². Bacterial production was markedly seasonal. Growth rates during late fall through spring were typically around 0.002 h⁻¹, and production rates were typically 5 μg of C liter⁻¹ h⁻¹. Growth rates were higher during warmer parts of the year and reached 0.03 h⁻¹ by August. The maximum instantaneous rate of bacterial production was approximately 45 μg of C liter⁻¹ h⁻¹. Annual areal bacterial production was 125 g of C m⁻². Temporal and spatial distributions of bacterial numbers and activities coincided with temporal and spatial distributions of primary production. Areal primary and bacterial secondary production were highly correlated (r = 0.77, n = 15, P < 0.002).     

Rapid Degradation of Isolated Lignins by Phanerochaete chrysosporium

Phanerochaete chrysosporium degraded purified Kraft lignin, alkali-extracted and dioxane-extracted straw lignin, and lignosulfonates at a similar rate, producing small-molecular-weight (~1,000) soluble products which comprised 25 to 35% of the original lignins. At concentrations of 1 g of lignin liter⁻¹, 90 to 100% of the acid-insoluble Kraft, alkali straw, and dioxane straw lignins were degraded by 1 g of fungal mycelium liter⁻¹ within an active ligninolytic period of 2 to 3 days. Cultures with biomass concentrations as low as 0.16 g liter⁻¹ could also completely degrade 1 g of lignin liter⁻¹ during an active period of 6 to 8 days. The absorbance at 280 nm of 2 g of lignosulfonate liter⁻¹ increased during the first 3 days of incubation and decreased to 35% of the original value during the next 7 days. The capacity of 1 g of cells to degrade alkali-extracted straw lignin under optimized conditions was estimated to be as high as 1.0 g day⁻¹. This degradation occurred with a simultaneous glucose consumption rate of 1.0 g day⁻¹. When glucose or cellular energy resources were depleted, lignin degradation ceased. The ability of P. chrysosporium to degrade the various lignins in a similar manner and at very low biomass concentrations indicates that the enzymes responsible for lignin degradation are nonspecific.     

Hydrolysis of 4-Hydroxybenzoic Acid Esters (Parabens) and Their Aerobic Transformation into Phenol by the Resistant Enterobacter cloacae Strain EM

Enterobacter cloacae strain EM was isolated from a commercial dietary mineral supplement stabilized by a mixture of methylparaben and propylparaben. It harbored a high-molecular-weight plasmid and was resistant to high concentrations of parabens. Strain EM was able to grow in liquid media containing similar amounts of parabens as found in the mineral supplement (1,700 and 180 mg of methyl and propylparaben, respectively, per liter or 11.2 and 1.0 mM) and in very high concentrations of methylparaben (3,000 mg liter⁻¹, or 19.7 mM). This strain was able to hydrolyze approximately 500 mg of methyl-, ethyl-, or propylparaben liter⁻¹ (3 mM) in less than 2 h in liquid culture, and the supernatant of a sonicated culture, after a 30-fold dilution, was able to hydrolyze 1,000 mg of methylparaben liter⁻¹ (6.6 mM) in 15 min. The first step of paraben degradation was the hydrolysis of the ester bond to produce 4-hydroxybenzoic acid, followed by a decarboxylation step to produce phenol under aerobic conditions. The transformation of 4-hydroxybenzoic acid into phenol was stoichiometric. The conversion of approximately 500 mg of parabens liter⁻¹ (3 mM) to phenol in liquid culture was completed within 5 h without significant hindrance to the growth of strain EM, while higher concentrations of parabens partially inhibited its growth.     

Transition from Anoxygenic to Oxygenic Photosynthesis in a Microcoleus chthonoplastes Cyanobacterial Mat

Benthic cyanobacterial mats with the filamentous Microcoleus chthonoplastes as the dominant phototroph grow in oxic hypersaline environments such as Solar Lake, Sinai. The cyanobacteria are in situ exposed to chemical variations between 200 μmol of sulfide liter⁻¹ at night and 1 atm pO₂ during the day. During experimental H₂S to O₂ transitions the microbial community was shown to shift from anoxygenic photosynthesis, with H₂S as the electron donor, to oxygenic photosynthesis. Microcoleus filaments could carry out both types of photosynthesis concurrently. Anoxygenic photosynthesis dominated at high sulfide levels, 500 μmol liter⁻¹, while the oxygenic reaction became dominant when the sulfide level was reduced below 100 to 300 μmol liter⁻¹ (25 to 75 μmol of H₂S liter⁻¹). An increasing inhibition of the oxygenic photosynthesis was observed upon transition to oxic conditions from increasing sulfide concentrations. Oxygen built up within the Microcoleus layer of the mat even under 5 mmol of sulfide liter⁻¹ (500 μmol of H₂S liter⁻¹) in the overlying water. The implications of such a localized O₂ production in a highly reducing environment are discussed in relation to the evolution of oxygenic photosynthesis during the Proterozoic era.