Binding modes of the initiator and inhibitor forms of the replication protein pi to the gamma ori iteron of plasmid R6K

Discerning the interactions between initiator protein and the origin of replication should provide insights into the mechanism of DNA replication initiation. In the gamma origin of plasmid R6K, the Rep protein, pi, is distinctive in that it can bind the seven 22-bp iterons in two forms; pi monomers activate replication, whereas pi dimers act as inhibitors. In this work, we used wild type and variants of the pi protein with altered monomer/dimer ratios to study iteron/pi interactions. High resolution contact mapping was conducted using multiple techniques (missing base contact probing, methylation protection, base modification, and hydroxyl radical footprinting), and the electrophoretic separation of nucleoprotein complexes allowed us to discriminate between contact patterns produced by pi monomers and dimers. We also isolated iteron mutants that affected the binding of pi monomers (only) or both monomers and dimers. The mutational studies and footprinting analyses revealed that, when binding DNA, pi monomers interact with nucleotides spanning the entire length of the iteron. In contrast, pi dimers interact with only the left half of the iteron; however, the retained interactions are strikingly similar to those seen with monomers. These results support a model in which Rep protein dimerization disturbs one of two DNA binding domains important for monomer/iteron interaction; the dimer/iteron interaction utilizes only one DNA binding domain.     

Plasmid P1 RepA is homologous to the F plasmid RepE class of initiators

DNA replication of plasmid P1 requires a plasmid-encoded origin DNA-binding protein, RepA. RepA is an inactive dimer and is converted by molecular chaperones into an active monomer that binds RepA binding sites. Although the sequence of RepA is not homologous to that of F plasmid RepE, we found by using fold-recognition programs that RepA shares structural homology with RepE and built a model based on the RepE crystal structure. We constructed mutants in the two predicted DNA binding domains to test the model. As expected, the mutants were defective in P1 DNA binding. The model predicted that RepA binds the first half of the binding site through interactions with the C-terminal DNA binding domain and the second half through interactions with the N-terminal domain. The experiments supported the prediction. The model was further supported by the observation that mutants defective in dimerization map to the predicted subunit interface region, based on the crystal structure of pPS10 RepA, a RepE family member. These results suggest P1 RepA is structurally homologous to plasmid initiators, including those of F, R6K, pSC101, pCU1, pPS10, pFA3, pGSH500, Rts1, RepHI1B, RepFIB, and RSF1010.     

The N-terminal domain of the replication initiator protein RepE is a dimerization domain forming a stable dimer

The initiator protein RepE of the mini-F plasmid in Escherichia coli plays an essential role in DNA replication, which is regulated by the molecular chaperone-dependent oligomeric state (monomer or dimer). Crosslinking, ultracentrifugation, and gel filtration analyses showed that the solely expressed N-terminal domain (residues 1-144 or 1-152) exists in the dimeric state as in the wild-type RepE protein. This result indicates that the N-terminal domain functions as a dimerization domain of RepE and might be important for the interaction with the molecular chaperones. The N-terminal domain dimer has been crystallized in order to obtain structural insight into the regulation of the monomer/dimer conversion of RepE.     

Protein domains and conformational changes in the activation of RepA, a DNA replication initiator.

RepA is the DNA replication initiator protein of the Pseudomonas plasmid pPS10. RepA has a dual function: as a dimer, it binds to an inversely-repeated sequence acting as a repressor of its own synthesis; as a monomer, RepA binds to four directly-repeated sequences to constitute a specialized nucleoprotein complex responsible for the initiation of DNA replication. We have previously shown that a Leucine Zipper-like motif (LZ) at the N-terminus of RepA is responsible for protein dimerization. In this paper we characterize the existence in RepA of two protein globular domains C-terminal to the LZ. We propose that dissociation of RepA dimers into monomers results in a conformational change from a compact arrangement of both domains, competent for binding to the operator, to an extended species that is suited for iteron binding. This model establishes the structural basis for the activation of DNA replication initiators in plasmids from Gram-negative bacteria.     

Cooperative binding mode of the inhibitors of R6K replication, pi dimers

The replication initiator protein, π, plays an essential role in the initiation of plasmid R6K replication. Both monomers and dimers of π bind to iterons in the γ origin of plasmid R6K, yet monomers facilitate open complex formation, while dimers, the predominant form in the cell, do not. Consequently, π monomers activate replication, while π dimers inhibit replication. Recently, it was shown that the monomeric form of π binds multiple tandem iterons in a strongly cooperative fashion, which might explain how monomers outcompete dimers for replication initiation when plasmid copy number and π supply are low. Here, we examine cooperative binding of π dimers and explore the role that these interactions may have in the inactivation of γ origin. To examine π dimer/iteron interactions in the absence of competing π monomer/iteron interactions using wild-type π, constructs were made with key base changes to each iteron that eliminate π monomer binding yet have no impact on π dimer binding. Our results indicate that, in the absence of π monomers, π dimers bind with greater cooperativity to alternate iterons than to adjacent iterons, thus preferentially leaving intervening iterons unbound and the origin unsaturated. We discuss new insights into plasmid replication control by π dimers.     

Role of individual monomers of a dimeric initiator protein in the initiation and termination of plasmid rolling circle replication

Plasmids of the pT181 family encode initiator proteins that act as dimers during plasmid rolling circle (RC) replication. These initiator proteins bind to the origin of replication through a sequence-specific interaction and generate a nick at the origin that acts as the primer for RC replication. Previous studies have demonstrated that the initiator proteins contain separate DNA binding and nicking-closing domains, both of which are required for plasmid replication. The tyrosine residue at position 191 of the initiator RepC protein of pT181 is known to be involved in nicking at the origin. We have generated heterodimers of RepC that consist of different combinations of wild type, DNA binding, and nicking mutant monomers to identify the role of each of the two monomers in RC replication. One monomer with DNA binding activity was sufficient for the targeting of the initiator to the origin, and the presence of Tyr-191 in one monomer was sufficient for the initiation of replication. On the other hand, a dimer consisting of one monomer defective in DNA binding and the other defective in origin nicking failed to initiate replication. Our results demonstrate that the monomer that promotes sequence-specific binding to the origin must also nick the DNA to initiate replication. Interestingly, whereas Tyr-191 of the initiator was required for nicking at the origin to initiate replication, it was dispensable for termination, suggesting that alternate amino acids in the initiator may promote termination but not initiation.     

Initiator protein dimerization plays a key role in replication control of Vibrio cholerae chromosome 2

RctB, the initiator of replication of Vibrio cholerae chromosome 2 (chr2), binds to the origin of replication to specific 12-mer sites both as a monomer and a dimer. Binding to 12-mers is essential for initiation. The monomers also bind to a second kind of site, 39-mers, which inhibits initiation. Mutations in rctB that reduce dimer binding increase monomer binding to 12-mers but decrease monomer binding to 39-mers. The mechanism of this paradoxical binding behavior has been unclear. Using deletion and alanine substitution mutants of RctB, we have now localized to a 71 amino acid region residues important for binding to the two kinds of DNA sites and for RctB dimerization. We find that the dimerization domain overlaps with both the DNA binding domains, explaining how changes in the dimerization domain can alter both kinds of DNA binding. Moreover, dimerization-defective mutants could be initiation-defective without apparent DNA binding defect. These results suggest that dimerization might be important for initiation beyond its role in controlling DNA binding. The finding that determinants of crucial initiator functions reside in a small region makes the region an attractive target for anti-V. cholerae drugs.     

Analysis of functional domains of Rts1 RepA by means of a series of hybrid proteins with P1 RepA.

The RepA protein of the plasmid Rts1, consisting of 288 amino acids, is a trans-acting protein essential for initiation of plasmid replication. To study the functional domains of RepA, hybrid proteins of Rts1 RepA with the RepA initiator protein of plasmid P1 were constructed such that the N-terminal portion was from Rts1 RepA and the C-terminal portion was from P1 RepA. Six hybrid proteins were examined for function. The N-terminal region of Rts1 RepA between amino acid residues 113 and 129 was found to be important for Rts1 ori binding in vitro. For activation of the origin in vivo, an Rts1 RepA subregion between residues 177 and 206 as well as the DNA binding domain was required. None of the hybrid initiator proteins activated the P1 origin. Both in vivo and in vitro studies showed, in addition, that a C-terminal portion of Rts1 RepA was required along with the DNA binding and ori activating domains to achieve autorepression, suggesting that the C-terminal region of Rts1 RepA is involved in dimer formation. A hybrid protein consisting of the N-terminal 145 amino acids of Rts1 and the C-terminal 142 amino acids from P1 showed strong interference with both Rts1 and P1 replication, whereas other hybrid proteins showed no or little effect on P1 replication.     

Regulation of DNA replication by iterons: an interaction between the ori2 and incC regions mediated by RepE-bound iterons inhibits DNA replication of mini-F plasmid in Escherichia coli.

In bacteria, plasmids and some DNA viruses, DNA replication is initiated and regulated by binding of initiator proteins to repetitive sequences. To understand the control mechanism we used the plasmid mini-F, whose copy number is stringently maintained in Escherichia coli, mainly by its initiator protein RepE and the incC region. The monomers of RepE protein bound to incC iterons, which exert incompatibility in trans and control the copy number of mini-F plasmid in cis. Many incompatibility defective mutants carrying mutations in their incC iterons had lost the affinity to bind to RepE, while one mutant retained high level binding affinity. The mutated incC mini-F plasmids lost the function to control the copy number. The copy number of the wild-type mini-F plasmid did not increase in the presence of excess RepE. These results suggested that the control of replication by incC iterons does not rely on their capacity to titrate RepE protein. Using a ligation assay, we found that RepE proteins mediated a cross-link structure between ori2 and incC, for which the dimerization domain of RepE and the structure of incC seem to be important. The structure probably causes inhibition of extra rounds of DNA replication initiation on mini-F plasmids, thereby keeping mini-F plasmid at a low copy number.     

The interaction of RepC initiator with iterons in the replication of the broad host-range plasmid RSF1010.

The replication origin of the broad host-range plasmid RSF1010 contains 3.5 copies of a 20mer iteron sequence that bind specifically to the plasmid-encoded initiator, RepC. Here we demonstrated that even a single iteron was bent upon binding of RepC. Moreover, the bending angle seems to become larger along with the increment of the number of iterons. In a mutational analysis of the iteron sequence, we isolated seven kinds of base-substitution mutants of iterons, and estimated the replication activity of these mutants in vivo. We found that each of the subsections in the 20mer iteron sequence made a distinct contribution to the initiation of RSF1010 DNA replication. With the binding assay of RepC and mutated iterons in vitro, we found that the formation of a productive RepC-iteron complex was required for the initiation of plasmid DNA replication.     

Fluorescence studies of the replication initiator protein RepA in complex with operator and iteron sequences and free in solution

RepA, the replication initiator protein from the Pseudomonas plasmid pPS10, regulates plasmid replication and copy number. It is capable of autorepression, in which case it binds as a dimer to the inverted repeat operator sequence preceding its own gene. RepA initiates plasmid replication by binding as a monomer to a series of four adjacent iterons, which contain the same half-repeat as found in the operator sequence. RepA contains two domains, one of which binds specifically to the half-repeat. The other is the dimerization domain, which is involved in protein-protein interactions in the dimeric RepA-operon complex, but which actually binds DNA in the monomeric RepA-iteron complex. Here, detailed fluorescence studies on RepA and an N-(iodoacetyl)aminoethyl-8-naphthylamine-1-sulfonic acid-labeled single-cysteine mutant of RepA (Cys160) are described. Using time-resolved fluorescence depolarization measurements, the global rotational correlation times of RepA free in solution and bound to the operator and to two distinct iteron dsDNA oligonucleotides were determined. These provide indications that, in addition to the monomeric RepA-iteron complex, a stable dimeric RepA-iteron complex can also exist. Further, F?rster resonance energy transfer between Trp94, located in the dimerization domain, and N-(iodoacetyl)aminoethyl-8-naphthylamine-1-sulfonic acid-Cys160, located on the DNA-binding domain, is observed and used to estimate the distance between the two fluorophores. This distance may serve as an indicator of the orientation between both domains in the unbound protein and RepA bound to the various cognate DNA sequences. No major change in distance is observed and this is taken as evidence for little to no re-orientation of both domains upon complex formation.     

The localized melting of mini-F origin by the combined action of the mini-F initiator protein (RepE) and HU and DnaA of Escherichia coli

Replication of mini-F plasmids requires the initiator protein RepE, which binds specifically to four iterons within the origin (ori2), as well as some host factors that are involved in chromosomal DNA replication. To understand the role of host factors and RepE in the early steps of mini-F DNA replication, we examined the effects of RepE and the Escherichia coli proteins DnaA and HU on the localized melting of ori2 DNA in a purified in vitro system. We found that the binding of RepE to an iteron causes a 50^° bend at or around the site of binding. RepE and HU exhibited synergistic effects on the localized melting within the ori2 region, as detected by sensitivity to the single-strand specific P1 endonuclease. This opening of duplex DNA occurred around the 13mer of ori2, whose sequence closely resembles the set of 13mers found in the chromosomal origin oriC. Further addition of DnaA to the reaction mixture increased the efficiency of melting and appeared to extend melting to the adjacent AT-rich region. Moreover, DNA melting with appreciably higher efficiencies was observed with mutant forms of RepE that were previously shown to be hyperactive both in DNA binding in vitro and in initiator activity in vivo. We propose that the binding of RepE to four iterons of ori2 causes bending at the sites of RepE binding and, with the assistance of HU, induces a localized melting in the 13mer region. The addition of DnaA extends melting to the AT-rich region, which could then serve as the entry site for the DnaB-DnaC complex, much as has been documented for oriC- dependent replication.     

Mini-F plasmid mutants able to replicate in Escherichia coli deficient in the DnaJ heat shock protein.

A subset of Escherichia coli heat shock proteins, DnaJ, DnaK, and GrpE, is required for mini-F plasmid replication, presumably at the step of functioning of the RepE initiator protein. We have isolated and characterized mini-F plasmid mutants that acquired the ability to replicate in the Escherichia coli dnaJ259. The mutant plasmids were found to replicate in any of dnaJ, dnaK, and grpE mutant hosts tested. In each case, the majority of the mutant plasmids carried a unique amino acid alteration in a localized region of repE coding sequence and showed an increased copy number, whereas the minority contained a common single base change (C to T) in the promoter/operator region and produced an increased amount of RepE. All RepE proteins with altered residues (between 92 and 134) exhibited increased initiator activities (hyperactive), and many showed reduced repressor activities as well, indicating that this region is important for the both major functions of RepE protein. These results together with evidence reported elsewhere indicate that the subset of heat shock proteins serves to activate RepE protein prior to or during its binding to the replication origin and that the mutant RepE proteins are active even in their absence. We also found that a C-terminal lesion (repE602) reduces the initiator activity particularly of some hyperactive mutant RepE proteins but does not affect the repressor activity. This finding suggests a functional interaction between the central and C-terminal regions of RepE in carrying out the initiator function.     

Oligomeric initiator protein-mediated DNA looping negatively regulates plasmid replication in vitro by preventing origin melting

Although DNA looping between the initiator binding sites (iterons) of the replication origin (ori) of a plasmid and the iterons located in a cis-acting control sequence called inc has been postulated to promote negative control of plasmid DNA replication, not only was definitive evidence for such looping lacking, but also the detailed molecular mechanism of this control had not been elucidated. Here, we present direct evidence showing that both the monomeric and the dimeric forms of the RepE initiator protein of F factor together promote pairing of incC-oriF sites by DNA looping. By using a reconstituted replication system consisting of 26 purified proteins, we show further that the DNA loop formation negatively regulates plasmid replication by inhibiting the formation of an open complex at the replication origin, thus elucidating a key step of replication control.     

The localized melting of mini-F origin by the combined action of the mini-F initiator protein (RepE) and HU and DnaA of Escherichia coli

 Replication of mini-F plasmids requires the initiator protein RepE, which binds specifically to four iterons within the origin (ori2), as well as some host factors that are involved in chromosomal DNA replication. To understand the role of host factors and RepE in the early steps of mini-F DNA replication, we examined the effects of RepE and the Escherichia coli proteins DnaA and HU on the localized melting of ori2 DNA in a purified in vitro system. We found that the binding of RepE to an iteron causes a 50^° bend at or around the site of binding. RepE and HU exhibited synergistic effects on the localized melting within the ori2 region, as detected by sensitivity to the single-strand specific P1 endonuclease. This opening of duplex DNA occurred around the 13mer of ori2, whose sequence closely resembles the set of 13mers found in the chromosomal origin oriC. Further addition of DnaA to the reaction mixture increased the efficiency of melting and appeared to extend melting to the adjacent AT-rich region. Moreover, DNA melting with appreciably higher efficiencies was observed with mutant forms of RepE that were previously shown to be hyperactive both in DNA binding in vitro and in initiator activity in vivo. We propose that the binding of RepE to four iterons of ori2 causes bending at the sites of RepE binding and, with the assistance of HU, induces a localized melting in the 13mer region. The addition of DnaA extends melting to the AT-rich region, which could then serve as the entry site for the DnaB-DnaC complex, much as has been documented for oriC- dependent replication. Received: 15 May 1996/Accepted: 11 July 1996     

Binding of RepE initiator protein to mini-F DNA origin (ori2). Enhancing effects of repE mutations and DnaJ heat shock protein.

Replication of mini-F plasmid in Escherichia coli requires the plasmid-encoded RepE initiator protein and a number of host factors and is regulated by interaction of RepE with specific sequences near the replication origin, ori2. We have examined DNA binding properties of several hyperactive mutant RepE proteins with single amino acid substitutions. Plasmids carrying these (repE) mutations, unlike the parental plasmid, can replicate in bacterial hosts lacking the heat shock sigma factor (sigma 32) or deficient in the DnaK, DnaJ, or GrpE heat shock protein. Using gel-retardation assays, the mutant RepE proteins were shown to bind the ori2 repeated sequences with much increased affinities compared to the wild type RepE, whereas they bound to the repE operator with slightly reduced affinities. These results agreed well with the properties of mutant RepE proteins studied in vivo and accounted for the high RepE initiator activities and the high copy numbers of mutant plasmids. In addition, the DnaJ heat shock protein was found to markedly enhance the binding of wild type RepE to ori2 or the operator. DnaK protein with or without ATP failed to show such enhancements. Thus, among the heat shock proteins required for mini-F replication, DnaJ appears to play a major role in RepE binding to ori2 and the operator, perhaps accompanied by RepE activation.