Direct evidence for excitonically coupled chlorophylls a and b in LHC II of higher plants by nonlinear polarization spectroscopy in the frequency domain

Human stefin B (cystatin B) is an intracellular cysteine proteinase inhibitor broadly distributed in different tissues. Here, we show that recombinant human stefin B readily forms amyloid fibrils in vitro. It dimerises and further oligomerises, starting from the native-like acid intermediate, I(N), populated at pH 5. On standing at room temperature it produces regular (over 4 microm long) fibrils over a period of several months. These have been visualised by transmission electron microscopy and atomic force microscopy. Their cross-sectional diameter is about 14 nm and blocks of 27 nm repeat longitudinally. The fibrils are smooth, of unbranched surface, consistent with findings of other amyloid fibrils. Thioflavin T fluorescence spectra as a function of time were recorded and Congo red dye binding to the fibrils was demonstrated. Adding 10% (v/v) trifluoroethanol resulted in an increased rate of fibrillation with a typical lag phase. The finding that human stefin B, in contrast to the homologue stefin A, forms amyloid fibrils rather easily should promote further studies of the protein's behaviour in vivo, and/or as a model system for fibrillogenesis.     

Amyloid fibril formation by human stefin B in vitro: immunogold labelling and comparison to stefin A

The mechanism by which proteins form amyloid fibrils is of high interest to the scientific community as its understanding could resolve questions relevant to conformational diseases. The structural and energetic basis of the process is still largely unknown. The main controversial issue is the co-existence of several protein conformations. Three models for the mechanism of protein fibrillogenesis have been proposed which need to be tested by experiments. In this report, amyloid fibrils grown from human stefin B (type I cystatin) are described. This physiologically relevant protein readily forms fibrils in vitro, in contrast to the homologue--human stefin A--which forms fibrils under extreme conditions only. In order to specifically label stefin B fibrils in vitro, rabbit polyclonal antibody and mouse monoclonal antibody A6/2 against human stefin B were used for immunogold labelling. Samples were examined by transmission electron microscopy. Fibrils of stefin B were strongly labelled using polyclonal antibody and Protein A gold, whereas no positive reaction was observed with monoclonal antibody A6/2.     

Differences in aggregation properties of three site-specific mutants of recombinant human stefin B

We describe expression, purification, and characterization of three site-specific mutants of recombinant human stefin B: H75W, P36G, and P79S. The far- and near-UV CD spectra have shown that they have similar secondary and tertiary structures to the parent protein. The elution on gel-filtration suggests that recombinant human stefin B and the P36G variant are predominantly monomers, whereas the P79S variant is a dimer. ANS dye binding, reflecting exposed hydrophobic patches, is highest for the P36G variant, both at pH 5 and 3. ANS dye binding also is increased for stefin B and the other two variants at pH 3. Under the chosen conditions the highest tendency to form amyloid fibrils has been shown for the recombinant human stefin B. The P79S variant demonstrates a longer lag phase and a lower rate of fibril formation, while the P36G variant is most prone to amorphous aggregation. This was demonstrated by ThT fluorescence as a function of time and by transmission electron microscopy.     

Transthyretin fibrillogenesis entails the assembly of monomers: a molecular model for in vitro assembled transthyretin amyloid-like fibrils

Extracellular accumulation of transthyretin (TTR) variants in the form of fibrillar amyloid deposits is the pathological hallmark of familial amyloidotic polyneuropathy (FAP). The TTR Leu55Pro variant occurs in the most aggressive forms of this disease. Inhibition of TTR wild-type (WT) and particularly TTR Leu55Pro fibril formation is of interest as a potential therapeutic strategy and requires a thorough understanding of the fibril assembly mechanism. To this end, we report on the in vitro assembly properties as observed by transmission electron microscopy (TEM), atomic force microscopy (AFM) and quantitative scanning transmission electron microscopy (STEM) for both TTR WT fibrils produced by acidification, and TTR Leu55Pro fibrils assembled at physiological pH. The morphological features and dimensions of TTR WT and TTR Leu55Pro fibrils were similar, with up to 300 nm long, 8 nm wide fibrils being the most prominent species in both cases. Other species were evident; 4-5 nm wide fibrils, 9-10 nm wide fibrils and oligomers of various sizes. STEM mass-per-length (MPL) measurements revealed discrete fibril types with masses of 9.5 and 14.0(+/-1.4) KDa/nm for TTR WT fibrils and 13.7, 18.5 and 23.2(+/-1.5) kDa/nm for TTR Leu55Pro fibrils. These MPL values are consistent with a model in which fibrillar TTR structures are composed of two, three, four or five elementary protofilaments, with each protofilament being a vertical stack of structurally modified TTR monomers assembled with the 2.9 nm axial monomer-monomer spacing indicated by X-ray fibre diffraction data. Ex vivo TTR amyloid fibrils were examined. From their morphological appearance compared to these, the in vitro assembled TTR WT and Leu55Pro fibrils examined may represent immature fibrillar species. The in vitro system operating at physiological pH for TTR Leu55Pro and the model presented for the molecular arrangement of TTR monomers within fibrils may, therefore, describe early fibril assembly events in vivo.     

Amyloid fibril formation by human stefins: Structure,mechanism & putative functions

Many questions in the field of protein aggregation to amyloid fibrils remain open. In this review we describe predominantly in vitro studies of oligomerization and amyloid fibril formation by human stefins A and B. In human stefin B amyloidogenesis in vitro we have observed some general and many specific properties of its prefibrillar oligomers and amyloid fibrils. One characteristic feature in common to stefins and cystatins (and possibly some other amyloid proteins) is domain-swapping. In addition to solution structure of the domain-swapped dimer of stefin A, we recently have determined 3D structure of stefin B tetramer, which proved to be composed from two domain-swapped dimers, whose interaction occurs by a proline switch in the loop surrounding the conserved Pro 74. Studying the mechanism of fibril formation by stefin B, we found that the nucleation and fibril elongation reactions have energies of activation (E_a’s) in the range of proline isomerisation, strongly indicating importance of the Pro at site 74 and/or other prolines in the sequence. Correlation between toxicity of the prefibrillar oligomers and their interaction with acidic phospholipids was demonstrated. Stefin B was shown to interact with amyloid-beta peptide of Alzheimer’s disease in an oligomer specific manner, both in vitro and in the cells. It also has been shown that endogenous stefin B (with E at site 31) but especially the EPM1 mutant R68X and Y31-stefin B variant, and to a lesser extent EPM1 mutant G4R, are prone to form aggregates in cells.     

High affinity copper binding by stefin B (cystatin B) and its role in the inhibition of amyloid fibrillation

We show that human stefin B, a protease inhibitor from the family of cystatins, is a copper binding protein, unlike stefin A. We have used isothermal titration calorimetry to directly monitor the binding event at pH 7 and pH 5. At pH 7 stefin B shows a picomolar affinity for copper but at pH 5 the affinity is in the nanomolar range. There is no difference in the affinity of copper between the wildtype stefin B (E31 isoform) and a variant (Y31 isoform), whereas the mutant (P79S), which is tetrameric, does not bind copper. The conformation of stefin B remains unaltered by copper binding. It is known that below pH 5 stefin B undergoes a conformational change and amyloid fibril formation. We show that copper binding inhibits the amyloid fibril formation and, to a lesser degree, the initial aggregation. Similarities to and differences from other copper binding amyloidogenic proteins are discussed.     

pH-Dependent fibril maturation of a Pmel17 repeat domain isoform revealed by tryptophan fluorescence

The pre-melanosomal protein (Pmel17) aggregates within melanosomes to form functional amyloid fibrils that facilitate melanin polymerization. The repeat domain (RPT) of Pmel17 fibrillates under strict acidic melanosomal pH. Alternative splicing results in a shortened repeat domain (sRPT), which also forms amyloid fibrils. Here, we explored the effects of pH and protein concentration on sRPT aggregation by monitoring the intrinsic fluorescence of the sole tryptophan at position 381 (³⁸¹W). ³⁸¹W emission properties revealed changes of local environment polarity for sRPT fibrils formed at different pH. At pH 4, fibrils formed rapidly with no lag phase. A high ³⁸¹W intensity was observed with a slight blue shift (10 nm). These fibrils underwent further structural rearrangements at intermediate pH (5–6), mirroring that of melanosome maturation, which initiates at pH 4 and increases to near neutral pH. In contrast, typical sigmoidal kinetics were observed at pH 6 with slower rates and ³⁸¹W exhibited quenched emission. Interestingly, biphasic kinetics were observed at pH 5 in a protein concentration-dependent manner. A large ³⁸¹W blue shift (23 nm) was measured, indicating a more hydrophobic environment for fibrils made at pH 5. Consistent with ³⁸¹W fluorescence, Raman spectroscopy revealed molecular level perturbations in sRPT fibrils that were not evident from circular dichroism, transmission electron microscopy, or limited proteolysis analysis. Finally, sRPT fibrils did not form at pH ≥7 and preformed fibrils rapidly disaggregated under these solution conditions. Collectively, this work yields mechanistic insights into pH-dependent sRPT aggregation in the context of melanosome maturation.     

Ultrasonication-induced amyloid fibril formation of beta2-microglobulin

To obtain insight into the mechanism of fibril formation, we examined the effects of ultrasonication, a strong agitator, on beta2-microglobulin (beta2-m), a protein responsible for dialysis-related amyloidosis. Upon sonication of an acid-unfolded beta2-m solution at pH 2.5, thioflavin T fluorescence increased markedly after a lag time of 1-2 h with a simultaneous increase of light scattering. Atomic force microscopy images showed the formation of a large number of short fibrils 3 nm in diameter. When the sonication-induced fibrils were used as seeds in the next seeding experiment at pH 2.5, a rapid and intense formation of long fibrils 3 nm in diameter was observed demonstrating seed-dependent fibril growth. We then examined the effects of sonication on the native beta2-m at neutral pH, conditions under which amyloid deposits occur in patients. In the presence of 0.5 mm sodium dodecyl sulfate, a model compound of potential trigger and stabilizer of amyloid fibrils in patients, a marked increase of thioflavin T fluorescence was observed after 1 day of sonication at pH 7.0. The products of sonication caused the accelerated fibril formation at pH 7.0. Atomic force microscopy images showed that the fibrils formed at pH 7.0 have a diameter of more than 7 nm, thicker than those prepared at pH 2.5. These results indicate that ultrasonication is one form of agitation triggering the formation of amyloid fibrils of beta2-m, producing fibrils adapted to the respective pH.     

Quantitative morphological analysis reveals ultrastructural diversity of amyloid fibrils from alpha-synuclein mutants

High resolution atomic force microscopy is a powerful tool to characterize nanoscale morphological features of protein amyloid fibrils. Comparison of fibril morphological properties between studies has been hampered by differences in analysis procedures and measurement error determination used by various authors. We describe a fibril morphology analysis method that allows for quantitative comparison of features of amyloid fibrils of any amyloidogenic protein measured by atomic force microscopy. We have used tapping mode atomic force microscopy in liquid to measure the morphology of fibrillar aggregates of human wild-type alpha-synuclein and the disease-related mutants A30P, E46K, and A53T. Analysis of the images shows that fibrillar aggregates formed by E46K alpha-synuclein have a smaller diameter (9.0 +/- 0.8 nm) and periodicity (mode at 55 nm) than fibrils of wild-type alpha-synuclein (height 10.0 +/- 1.1 nm; periodicity has a mode at 65 nm). Fibrils of A30P have smaller diameter still (8.1 +/- 1.2 nm) and show a variety of periodicities. This quantitative analysis procedure enables comparison of the results with existing models for assembly of amyloid fibrils.     

Beta(2)-microglobulin and its deamidated variant, N17D form amyloid fibrils with a range of morphologies in vitro.

Amyloid fibrils formed by incubation of recombinant wild-type human beta(2)-microglobulin (beta(2)M) ab initio in vitro at low pH and high ionic strength are short and highly curved. By contrast, fibrils extracted from patients suffering from haemodialysis-related amyloidosis and those formed by seeding growth of the wild-type protein in vitro with fibrils ex vivo are longer and straighter than those previously produced ab initio in vitro. Here we explore the effect of growth conditions on morphology of beta(2)M fibrils formed ab initio in vitro from the wild-type protein, as well as a variant form of beta(2)M in which Asn17 is deamidated to Asp (N17D). We show that deamidation results in significant destabilisation of beta(2)M at neutral pH. Despite this, acidification is still necessary to form amyloid from the mutant protein in vitro. Interestingly, at low pH and low ionic strength long, straight fibrils of recombinant beta(2)M are formed in vitro. The fibrils comprise three distinct morphological types when examined using electron microscopy (EM) and atomic force microscopy (AFM) that vary in periodicity and the number of constituent protofibrils. Using kinetic experiments we suggest that the immature fibrils observed previously do not represent intermediates in the assembly of fully mature amyloid, at least under the conditions studied here.     

Solution conditions can promote formation of either amyloid protofilaments or mature fibrils from the HypF N-terminal domain

The HypF N-terminal domain has been found to convert readily from its native globular conformation into protein aggregates with the characteristics of amyloid fibrils associated with a variety of human diseases. This conversion was achieved by incubation at acidic pH or in the presence of moderate concentrations of trifluoroethanol. Electron microscopy showed that the fibrils grown in the presence of trifluoroethanol were predominantly 3-5 nm and 7-9 nm in width, whereas fibrils of 7-9 nm and 12-20 nm in width prevailed in samples incubated at acidic pH. These results indicate that the assembly of protofilaments or narrow fibrils into mature amyloid fibrils is guided by interactions between hydrophobic residues that may remain exposed on the surface of individual protofilaments. Therefore, formation and isolation of individual protofilaments appears facilitated under conditions that favor the destabilization of hydrophobic interactions, such as in the presence of trifluoroethanol.     

The cross-road between the mechanisms of protein folding and aggregation; study of human stefin B and its H75W mutant

The role of the aromatic residue at site 75 to protein stability, the mechanism of folding and the mechanism of amyloid-fibril formation were investigated for the human stefin B variant (bearing Y at site 31) and its point mutation H75W. With an aim to reveal the conformation at the cross-road between folding and aggregation, first, the kinetics of folding and oligomer formation by human stefin B(Y31) variant were studied. It was found to fold in three kinetic phases at pH 4.8 and 10% TFE; the pH and solvent conditions that transform the protein into amyloid fibrils at longer times. The same pH leads to the formation of native-like intermediate (known from previous studies of this variant), meaning that the process of folding and amyloid-fibril formation share the same structural intermediate, which is in this case native-like and dimeric. At pH 5.8 and 7.0 stefin B folded to the native state in four kinetic phases over two intermediates. In distinction, the mutant H75W did not fold to completion, ending in intermediate states at all pH values studied: 4.8, 5.8 and 7.0. At pH 4.8 and 5.8, the mutant folded in one kinetic phase to the intermediate of the “molten globule” type, which leads to the conclusion that its mechanism of folding differs from the one of the parent stefin B at the same pH. At pH 7.0 the mutant H75W folded in three kinetic phases to a native-like intermediate, analogous to folding of stefin B at pH 4.8.     

Differences in the effects of TFE on the folding pathways of human stefins A and B.

Trifluoroethanol (TFE) has been used to probe differences in the stability of the native state and in the folding pathways of the homologous cysteine protein inhibitors, human stefin A and B. After complete unfolding in 4.5 mol/L GuHCl, stefin A refolded in 11% (vol/vol) TFE, 0.75 mol/L GuHCl, at pH 6.0 and 20 degrees C, with almost identical first-order rate constants of 4.1 s-1 and 5.5 s-1 for acquisition of the CD signal at 230 and 280 nm, respectively, rates that were markedly greater than the value of 0.11 s-1 observed by the same two probes when TFE was absent. The acceleration of the rates of refolding, monitored by tyrosine fluorescence, was maximal at 10% (vol/vol) TFE. Similar rates of refolding (6.2s-1 and 7.2 s-1 for ellipticity at 230 and 280 nm, respectively) were observed for stefin A denatured in 66% (vol/vol) TFE, pH 3.3, when refolding to the same final conditions. After complete unfolding in 3.45 mol/L GuHCl, stefin B refolded in 7% (vol/vol) TFE, 0.57 mol/L GuHCl, at pH 6.0 and 20 degrees C, with a rate constant for the change in ellipticity at 280 nm of 32.8 s-1; this rate was only twice that observed when TFE was absent. As a major point of distinction from stefin A, the refolding of stefin B in the presence of TFE showed an overshoot in the ellipticity at 230 nm to a value 10% greater than that in the native protein; this signal relaxed slowly (0.01 s-1) to the final native value, with little concomitant change in the near-ultraviolet CD signal; the majority of this changes in two faster phases. After denaturation in 42% (vol/vol) TFE, pH 3.3, the kinetics of refolding to the same final conditions exhibited the same rate-limiting step (0.01 s-1) but were faster initially. The results show that similarly to stefin A, stefin B forms its hydrophobic core and predominant part of the tertiary structure faster in the presence of TFE. The results imply that the alpha-helical intermediate of stefin B is highly structured. Proteins 1999;36:205-216.     

A general model for amyloid fibril assembly based on morphological studies using atomic force microscopy

Based on atomic force microscopy analysis of the morphology of fibrillar species formed during fibrillation of alpha-synuclein, insulin, and the B1 domain of protein G, a previously described model for the assembly of amyloid fibrils of immunoglobulin light-chain variable domains is proposed as a general model for the assembly of protein fibrils. For all of the proteins studied, we observed two or three fibrillar species that vary in diameter. The smallest, protofilaments, have a uniform height, whereas the larger species, protofibrils and fibrils, have morphologies that are indicative of multiple protofilaments intertwining. In all cases, protofilaments intertwine to form protofibrils, and protofibrils intertwine to form fibrils. We propose that the hierarchical assembly model describes a general mechanism of assembly for all amyloid fibrils.     

Mechanism of thioflavin T binding to amyloid fibrils

Thioflavin T is a benzothiazole dye that exhibits enhanced fluorescence upon binding to amyloid fibrils and is commonly used to diagnose amyloid fibrils, both ex vivo and in vitro. In aqueous solutions, thioflavin T was found to exist as micelles at concentrations commonly used to monitor fibrils by fluorescence assay ( approximately 10-20 microM). Specific conductivity changes were measured at varying concentration of thioflavin T and the critical micellar concentration was calculated to be 4.0+/-0.5 microM. Interestingly, changes in the fluorescence excitation and emission of thioflavin T were also dependent on the micelle formation. The thioflavin T micelles of 3 nm diameter were directly visualized using atomic force microscopy, and bound thioflavin T micelles were observed along the fibril length for representative fibrils. Increasing concentration of thioflavin T above the critical micellar concentration shows increased numbers of micelles bound along the length of the amyloid fibrils. Thioflavin T micelles were disrupted at low pH as observed by atomic force microscopy and fluorescence enhancement upon binding of thioflavin T to amyloid fibrils also reduced by several-fold upon decreasing the pH to below 3. This suggests that positive charge on the thioflavin T molecule has a role in its micelle formation that then bind the amyloid fibrils. Our data suggests that the micelles of thioflavin T bind amyloid fibrils leading to enhancement of fluorescence emission.     

The circularization of amyloid fibrils formed by apolipoprotein C-II

Amyloid fibrils have historically been characterized by diagnostic dye-binding assays, their fibrillar morphology, and a "cross-beta" x-ray diffraction pattern. Whereas the latter demonstrates that amyloid fibrils have a common beta-sheet core structure, they display a substantial degree of morphological variation. One striking example is the remarkable ability of human apolipoprotein C-II amyloid fibrils to circularize and form closed rings. Here we explore in detail the structure of apoC-II amyloid fibrils using electron microscopy, atomic force microscopy, and x-ray diffraction studies. Our results suggest a model for apoC-II fibrils as ribbons approximately 2.1-nm thick and 13-nm wide with a helical repeat distance of 53 nm +/- 12 nm. We propose that the ribbons are highly flexible with a persistence length of 36 nm. We use these observed biophysical properties to model the apoC-II amyloid fibrils either as wormlike chains or using a random-walk approach, and confirm that the probability of ring formation is critically dependent on the fibril flexibility. More generally, the ability of apoC-II fibrils to form rings also highlights the degree to which the common cross-beta superstructure can, as a function of the protein constituent, give rise to great variation in the physical properties of amyloid fibrils.     

Fibrillar beta-lactoglobulin gels: Part 1. Fibril formation and structure

As a prelude to experimental and theoretical work on the mechanical properties of fibrillar beta-lactoglobulin gels, this paper reports the structural characterization of beta-lactoglobulin fibrils by electron and atomic force microscopy (AFM), infrared and Raman spectroscopy, and powder X-ray diffraction. Aggregates formed by incubation of beta-lactoglobulin in various alcohol-water mixtures at pH 2, and in water-trifluoroethanol (TFE) at pH 7, were found to be wormlike (approximately 7 nm in width and <500 nm in length), with a "string-of-beads" appearance. Longer (approximately 7 nm in width, and >1 microm in length), smoother, and seemingly stiffer fibrils formed on heating aqueous beta-lactoglobulin solutions at pH 2 and low ionic strength, although there was little evidence for the higher-order structures common in most amyloid-forming systems. Time-lapse AFM also revealed differences in the formation of these two fibril types: thermally induced aggregation occurring more cooperatively, in keeping with a nucleation and growth process. Only short stiff-rods (<20 nm in length) formed on heating beta-lactoglobulin at pH 7, and only complex three-dimensional "amorphous"aggregates in alcohols other than TFE at this pH. Studies of all of the pH 2 fibrils from beta-lactoglobulin, by Raman and infrared spectroscopy confirmed beta-sheet as mediating the aggregation process. Interestingly, however, some evidence for de novo helix formation for the solvent-induced systems was obtained, although it remains to be seen whether this is actually incorporated into the fibril-structure. In contrast to other amyloid systems, X-ray powder diffraction provided no evidence for extensive repeating "crystalline" structures for any of the pH 2 beta-lactoglobulin fibrils. In relation to amyloid, the lactoglobulin fibrils bear more resemblance to protofilaments than to higher-order fibril structures, these latter appearing more convincingly for thermally induced insulin fibrils (pH 2) also included in the AFM study.     

Spectroscopic characterization of diverse amyloid fibrils in vitro by the fluorescent dye Nile red

The fluorescence of Nile red (9-diethylamino-5H-benzophenoxazine-5-one) is quenched in aqueous solutions but shows augmented fluorescence in hydrophobic environments. Nile red fluorescence was blue shifted and strongly augmented in the presence of various amyloid fibrils assayed under acidic as well as neutral pH conditions. Fibrils grown from lysozyme and insulin (at pH 1.6 and 65 °C), transthyretin (TTR) fibrils grown from the acid unfolded monomer (pH 2.0, 21 °C) or from the dissociated tetramer starting from native protein under less acidic conditions (pH 4.4, 37 °C) were detected. Nile red was also successfully employed in detecting Aβ1-42 and human prion protein (PrP90-231) amyloid fibrils grown at neutral pH. Nile red was amyloid fibril specific and did not fluoresce appreciably in the presence of the monomeric precursor proteins. Stoke's shifts of the wavelength maximum of Nile red bound to various fibrils were different (ranging from 615 nm to 638 nm) indicating sensitivity to the tertiary structure in its respective binding sites of different amyloid proteins. A polarity assay using ethanol-water mixtures and pure octanol ranging from dielectric constants between 10 and 70 showed a linear correlation of Nile red Stoke's shift and allowed assignment of amyloid fibril binding site polarity. Fluorescence resonance energy transfer between Thioflavin T (ThT) and Nile red was proven to be efficient and co-staining was employed to discriminate between conformational isoforms of Aβ1-42 amyloid fibrils grown under agitated and quiescent conditions. This paper demonstrates the complementary use of this fluorometric method for conformational typing of amyloid structures.     

Amyloidogenic potential of alpha-chymotrypsin in different conformational states

Amyloid fibril formation is widely believed to be a generic property of polypeptide chains. In the present study, alpha-chymotrypsin, a well-known serine protease has been driven toward these structures by the use of two different conditions involving (I) high temperature, pH 2.5, and (II) low concentration of trifluoroethanol (TFE), pH 2.5. A variety of experimental methods, including fluorescence emission, dynamic quenching, steady-state fluorescence anisotropy, far-UV circular dichroism, nuclear magnetic resonance spectroscopy, and dynamic light scattering were employed to characterize the conformational states of alpha-chymotrypsin that precede formation of amyloid fibrils. The structure formed under Condition I was an unfolded monomer, whereas an alpha-helical rich oligomer was induced in Condition II. Both the amyloid aggregation-prone species manifested a higher solvent exposure of hydrophobic and aromatic residues compared with the native state. Upon incubation of the protein in these conditions for 48 h, amyloid-like fibrils were formed with diameters of about 10-12 nm. In contrast, at neutral pH and low concentration of TFE, a significant degree of amorphous aggregation was observed, suggesting that charge neutralization of acidic residues in the amyloid core region has a positive influence on amyloid fibril formation. In summary, results presented in this communication suggest that amyloid fibrils of alpha-chymotrypsin may be obtained from a variety of structurally distinct conformational ensembles highlighting the critical importance of protein evolution mechanisms related to prevention of protein misfolding.     

Chemical dissection and reassembly of amyloid fibrils formed by a peptide fragment of transthyretin

We have examined the chemical dissection and subsequent reassembly of fibrils formed by a ten-residue peptide to probe the forces that drive the formation of amyloid. The peptide, TTR(10-19), encompasses the A strand of the inner beta-sheet structure that lines the thyroid hormone binding site of the human plasma protein transthyretin. When dissolved in water under low pH conditions the peptide readily forms amyloid fibrils. Electron microscopy of these fibrils indicates the presence of long (>1000 nm) rigid structures of uniform diameter (approximately 14 nm). Addition of urea (3 M) to preformed fibrils disrupts these rigid structures. The partially disrupted fibrils form flexible ribbon-like arrays, which are composed of a number of clearly visible protofilaments (3-4 nm diameter). These protofilaments are highly stable, and resist denaturation in 6 M urea at 75 degrees C over a period of hours. High concentrations (>50%, v/v) of 2,2,2-trifluoroethanol also dissociate TTR(10-19) fibrils to the constituent protofilaments, but these slowly dissociate to monomeric, soluble peptides with extensive alpha-helical structure. Dilution of the denaturant or co-solvent at the stage when dissociation to protofilaments has occurred results in the efficient reassembly of fibrils. These results indicate that assembly of fibrils from protofilaments involves relatively weak and predominantly hydrophobic interactions, whereas assembly of peptides into protofilaments involves both electrostatic and hydrophobic forces, resulting in a highly stable and compact structures.