PEGylated degradable composite nanoparticles based on mixtures of PEG-b-poly(γ-benzyl L-glutamate) and poly(γ-benzyl L-glutamate)

In the present work, the possibility to obtain PEGylated nanoparticles from two PBLG derivatives, PEG-b-poly(γ-benzyl L-glutamate), PBLG-PEG-60, and poly(γ-benzyl L-glutamate), PBLG-Bnz-50, by nanoprecipitation has been investigated. Particles were prepared not only from one polymer (PBLG-PEG-60 or PBLG-Bnz-50), but also from mixtures of two PBLG derivatives, PBLG-PEG-60 and PBLG-Bnz-50, in different ratios (90/10, 77/23, and 40/60 wt %). Because of the presence of PEG chains, hydrophilic particles were obtained, which was confirmed by ζ potential measurements (ζ from -13 mV and -21 mV) and by isothermal titration microcalorimetry (ITC). This last technique has shown no heat exchange when BSA was added to PEGylated nanoparticles. Further, complement activation has been evaluated by crossed immuno-electrophoresis demonstrating that the introduction of 77 wt % of PEGylated PBLG chains in the particles was enough to ensure a low complement activation activity. This effect was strongly correlated to the ζ potential of the particles, which decreased with an increase of PEG chains content. Interestingly, such properties are of interest for the preparation of degradable stealth nanocarriers. Moreover, it is suggested that the introduction of a reasonable amount (up to 20 wt %) of a second copolymer in the particle composition can be possible without modifying their stealth character. Moreover, the presence of this second copolymer would help to introduce a second functionality to the particles.     

Fine tuning micellar core-forming block of poly(ethylene glycol)-block-poly(ε-caprolactone) amphiphilic copolymers based on chemical modification for the solubilization and delivery of doxorubicin

This study aimed to optimize poly(ethylene glycol)-b-poly(ε-caprolactone) (PEG-b-PCL)-based amphiphilic block copolymers for achieving a better micellar drug delivery system (DDS) with improved solubilization and delivery of doxorubicin (DOX). First, the Flory-Huggins interaction parameters between DOX and the core-forming segments [i.e., poly(ε-caprolactone) (PCL) and poly[(ε-caprolactone-co-γ-(carbamic acid benzyl ester)-ε-caprolactone] (P(CL-co-CABCL))] was calculated to assess the drug-polymer compatibility. The results indicated a better compatibility between DOX and P(CL-co-CABCL) than that between DOX and PCL, motivating the synthesis of monomethoxy-poly(ethylene glycol)-b-poly[(ε-caprolactone-co-γ-(carbamic acid benzyl ester)-ε-caprolactone] (mPEG-b-P(CL-co-CABCL)) block copolymer. Second, two novel block copolymers of mPEG-b-P(CL-co-CABCL) with different compositions were prepared via ring-opening polymerization of CL and CABCL using mPEG as a macroinitiator and characterized by (1)H NMR, FT-IR, GPC, WAXD, and DSC techniques. It was found that the introduction of CABCL decreased the crystallinity of mPEG-b-PCL copolymer. Micellar formation of the copolymers in aqueous solution was investigated with fluorescence spectroscopy, DLS and TEM. mPEG-b-P(CL-co-CABCL) copolymers had a lower critical micelle concentration (CMC) than mPEG-b-PCL and subsequently led to an improved stability of prepared micelles. Furthermore, both higher loading capacity and slower in vitro release of DOX were observed for micelles of copolymers with increased content of CABCL, attributed to both improved drug-core compatibility and favorable amorphous core structure. Meanwhile, DOX-loaded micelles facilitated better uptake of DOX by HepG2 cells and were mainly retained in the cytosol, whereas free DOX accumulated more in the nuclei. However, possibly because of the slower intracellular release of DOX, DOX-loaded micelles were less potent in inhibiting cell proliferation than free DOX in vitro. Taken together, the introduction of CABCL in the core-forming block of mPEG-b-PCL resulted in micelles with superior properties, which hold great promise for drug delivery applications.     

Enhanced stability of polymeric micelles based on postfunctionalized poly(ethylene glycol)-b-poly(γ-propargyl L-glutamate): the substituent effect

One of the major obstacles that delay the clinical translation of polymeric micelle drug delivery systems is whether these self-assembled micelles can retain their integrity in blood following intravenous (IV) injection. The objective of this study was to evaluate the impact of core functionalization on the thermodynamic and kinetic stability of polymeric micelles. The combination of ring-opening polymerization of N-carboxyanhydride (NCA) with highly efficient "click" coupling has enabled easy and quick access to a family of poly(ethylene glycol)-block-poly(γ-R-glutamate)s with exactly the same block lengths, for which the substituent "R" is tuned. The structures of these copolymers were carefully characterized by (1)H NMR, FT-IR, and GPC. When pyrene is used as the fluorescence probe, the critical micelle concentrations (CMCs) of these polymers were found to be in the range of 10(-7)-10(-6) M, which indicates good thermodynamic stability for the self-assembled micelles. The incorporation of polar side groups in the micelle core leads to high CMC values; however, micelles prepared from these copolymers are kinetically more stable in the presence of serum and upon SDS disturbance. It was also observed that these polymers could effectively encapsulate paclitaxel (PTX) as a model anticancer drug, and the micelles possessing better kinetic stability showed better suppression of the initial "burst" release and exhibited more sustained release of PTX. These PTX-loaded micelles exerted comparable cytotoxicity against HeLa cells as the clinically approved Cremophor PTX formulation, while the block copolymers showed much lower toxicity compared to the cremophor-ethanol mixture. The present work demonstrated that the PEG-b-PPLG can be a uniform block copolymer platform toward development of polymeric micelle delivery systems for different drugs through the facile modification of the PPLG block.     

Galactose-decorated cross-linked biodegradable poly(ethylene glycol)-b-poly(ε-caprolactone) block copolymer micelles for enhanced hepatoma-targeting delivery of paclitaxel

The inferior in vivo stability of micellar drugs has been a prime challenge for their application in targeted drug delivery. Here we report on novel galactose-decorated covalently cross-linked biodegradable micelles based on photo-cross-linkable poly(ethylene glycol)-b-poly(acryloyl carbonate)-b-poly(ε-caprolactone) (PEG-PAC-PCL) and galactose-conjugated PEG-PCL (Gal-PEG-PCL) copolymers for enhanced hepatoma-targeting delivery of paclitaxel (PTX). The molecular weight of PEG in Gal-PEG-PCL was higher than that in PEG-PAC-PCL, thereby fully exposing Gal ligands at the micellar surface. These micelles, either with or without loading of PTX, were readily cross-linked by UV irradiation to afford micelles with small sizes (ca. 79-94 nm) and enhanced stability. The in vitro release studies confirmed that drug release from cross-linked micelles was significantly inhibited. Interestingly, MTT assays showed that Gal-decorated PTX-loaded cross-linked micelles retained a high antitumor activity in HepG2 cells, which was much more effective than PTX-loaded cross-linked micelles without Gal ligands and comparable to Gal-decorated PTX-loaded non-cross-linked micelles. Remarkably, the preliminary in vivo antitumor efficacy studies in SMMC-7721 tumor (human hepatoma)-bearing nude mice revealed that Gal-decorated PTX-loaded cross-linked micelles inhibited the growth of the human hepatoma more effectively than PTX-loaded cross-linked micelles as well as Gal-decorated PTX-loaded non-cross-linked micelles. These results indicate that Gal-decorated cross-linked PEG-PCL micelles have great potential in liver tumor-targeted chemotherapy.     

Poly(vinylferrocene)–poly(ethylene glycol) glutamate oxidase electrode for determination of L-glutamate in commercial soy sauces

An amperometric L-glutamate oxidase (GLOD) electrode based on a multilayer of polymer films was developed for the high selective determination of L-glutamate. The multilayer film consisted of three layers as the following configuration i.e., inner membrane of electropolymerized 1,3-diaminobenzene, middle layer of L-GLOD entrapped in photopolymerized poly(vinylferrocene)–poly(ethylene glycol) hydrogel polymer, and outer dialysis membrane. In this manner, the sensor could eliminate interferences and was able to work at a low potential poised at +0.085 V vs. Ag/AgCl. When used in a flow injection system, the sensor responded to L-glutamate in the range 0.5–8.0 mM, with a sensitivity of 9.48 nA mM^–1. The sensor was stable for 5 days of continuous uses (250 assays) and retained 60% activity after 16 days. When used to analyse the L-glutamate contents of a number of different off-the-shelf soy sauces, the sensor gave results in good agreement with the standard colorimetric method.     

New route for synthesizing poly(ethylene glycol)-acrylic acid hydrogels using γ-irradiation for drug delivery carriers

Biocompatible and pH-responsive poly(ethylene glycol) (PEG)-acrylic acid (AAc) hydrogels were prepared by new technique using γ-irradiation for controlled oral drug delivery. The gel fraction was over 80% and the equal amounts of PEG and AAc blended hydrogel had efficient insulin loading using equilibrium swelling. These hydrogels exhibited unique pH-responsive characteristics in which interpolymer complexes were formed in acidic media and dissociated in neutral or basic environments. The insulin release from the gel was significantly retarded in acidic media while rapid release occurred under neutral/basic conditions. At the high pH solution, the gels swelled rapidly and over 70% of the insulin loaded was released over a period of 10 h. Within 2 h of administration of the insulin-containing gels, significant blood glucose reduction effects were observed in diabetic rats. The blood glucose reduction lasted for up to 10 h following administration.     

Evaluation of triblock copolymeric micelles of δ- valerolactone and poly (ethylene glycol) as a competent vector for doxorubicin delivery against cancer

Background

The synthesis of bioactive nanoparticles with precise molecular level control is a major challenge in bionanotechnology. Understanding the nature of the interactions between the active components and transport biomaterials is thus essential for the rational formulation of bio-nanocarriers. The current study presents a single molecule of bovine serum albumin (BSA), lysozyme (Lys), or myoglobin (Mb) used to load hydrophobic drugs such as quercetin (Q) and other flavonoids.

Results

Induced by dimethyl sulfoxide (DMSO), BSA, Lys, and Mb formed spherical nanocarriers with sizes less than 70 nm. After loading Q, the size was further reduced by 30%. The adsorption of Q on protein is mainly hydrophobic, and is related to the synergy of Trp residues with the molecular environment of the proteins. Seven Q molecules could be entrapped by one Lys molecule, 9 by one Mb, and 11 by one BSA. The controlled releasing measurements indicate that these bioactive nanoparticles have long-term antioxidant protection effects on the activity of Q in both acidic and neutral conditions. The antioxidant activity evaluation indicates that the activity of Q is not hindered by the formation of protein nanoparticles. Other flavonoids, such as kaempferol and rutin, were also investigated.

Conclusions

BSA exhibits the most remarkable abilities of loading, controlled release, and antioxidant protection of active drugs, indicating that such type of bionanoparticles is very promising in the field of bionanotechnology.     

In vitro drug release behavior from a novel thermosensitive composite hydrogel based on Pluronic f127 and poly(ethylene glycol)-poly(ε-caprolactone)-poly(ethylene glycol) copolymer

Background  

Most conventional methods for delivering chemotherapeutic agents fail to achieve therapeutic concentrations of drugs, despite reaching toxic systemic levels. Novel controlled drug delivery systems are designed to deliver drugs at predetermined rates for predefined periods at the target organ and overcome the shortcomings of conventional drug formulations therefore could diminish the side effects and improve the life quality of the patients. Thus, a suitable controlled drug delivery system is extremely important for chemotherapy.     

Molecular simulation on self-assembly morphologies of rod–coil polystyrene-b-poly(ethylene glycol) copolymers in aqueous solution

In this work, dissipative particle dynamics simulations were performed to study the self-assembly morphologies of rod–coil block copolymer polystyrene-b-poly(ethylene glycol) (PS-b-PEG) in aqueous solution under different variables. Effect of time evolution on the self-assembly morphology of PS-b-PEG was observed first. Besides, spherical, cylindrical and lamellar structures were obtained at a range of concentrations. In addition, their self-assembly morphologies could also be regulated by the PS chain length. Our simulation results can provide deeper insight into the microstructure of rod–coil block copolymers in aqueous solution, which can be useful to guide the molecular design and experimental preparation of novel rod–coil block copolymers with controlled structures.     

Synthesis of poly(lactide-co-glycolide-co-ε-caprolactone)-graft-mannosylated poly(ethylene oxide) copolymers by combination of "clip" and "click" chemistries

Poly(lactide-co-glycolide) (PLGA) is extensively used in pharmaceutical applications, for example, in targeted drug delivery, because of biocompatibility and degradation rate, which is easily tuned by the copolymer composition. Nevertheless, synthesis of sugar-labeled amphiphilic copolymers with a PLGA backbone is quite a challenge because of high sensitivity to hydrolytic degradation. This Article reports on the synthesis of a new amphiphilic copolymer of PLGA grafted by mannosylated poly(ethylene oxide) (PEO). A novel building block, that is, α-methoxy-ω-alkyne PEO-clip-N-hydroxysuccinimide (NHS) ester, was prepared on purpose by photoreaction of a diazirine containing molecular clip. This PEO block was mannosylated by reaction of the NHS ester groups with an aminated sugar, that is, 2-aminoethyl-α-d-mannopyroside. Then, the alkyne ω-end-group of PEO was involved in a copper alkyne- azide coupling (CuAAC) with the pendent azides of the aliphatic copolyester. The targeted mannose-labeled poly(lactide-co-glycolide-co-ε-caprolactone)-graft-poly(ethylene oxide) copolymer was accordingly formed. Copolymerization of d,l-lactide and glycolide with α-chloro-ε-caprolactone, followed by substitution of chlorides by azides provided the azido-functional PLGA backbone. Finally, micelles of the amphiphilic mannosylated graft copolymer were prepared in water, and their interaction with Concanavalin A (ConA), a glyco-receptor protein, was studied by quartz crystal microbalance. This study concluded to the prospect of using this novel bioconjugate in targeted drug delivery.     

Use of 5'-γ-ferrocenyl adenosine triphosphate (Fc-ATP) bioconjugates having poly(ethylene glycol) spacers in kinase-catalyzed phosphorylations

The 5'-γ-ferrocenyl adenosine triphosphate (Fc-ATP) bioconjugates (3 and 4), containing the poly(ethylene glycol) spacers, were synthesized and compared to a hydrophobic analogue as co-substrates for the following protein kinases: sarcoma related kinase (Src), cyclin-dependent kinase (CDK), casein kinase II (CK2α), and protein kinase A (PKA). Electrochemical kinase assays indicate that the hydrophobic Fc-ATP analogue was an optimal co-substrate for which K(M) values were determined to be in the 30-200 μM range, depending on the particular protein kinase. The luminescence kinase assay demonstrated the kinase utility for all Fc-ATP conjugates, which is in line with the electrochemical data. Moreover, Fc-ATP bioconjugates exhibit competitive behavior with respect to ATP. Relatively poor performance of the polar Fc-ATP bioconjugates as co-substrates for protein kinases was presumably due to the additional H-bonding and electrostatic interactions of the poly(ethylene glycol) linkers of Fc-ATP with the kinase catalytic site and the target peptides. Phosphorylation of the full-length protein, His-tagged pro-caspase-3, was demonstrated through Fc-phosphoamide transfer to the Ser residues of the surface-bound protein by electrochemical means. These results suggest that electrochemical detection of the peptide and protein Fc-phosphorylation via tailored Fc-ATP co-substrates may be useful for probing protein-protein interactions.     

Complex between α-Chymotrypsin and poly(ethylene glycol) catalytically active in organic media

-Chymotrypsin and poly(ethylene glycol) were mixed in an aqueous phosphate buffer solution and lyophilized. The preparation was readily soluble in anhydrous isooctane. The polymer/enzyme complex, i.e., poly(ethylene glycol)/-chymotrypsin, was catalytically active in anhydrous isooctane even when the molecular ratio of them was unity.     

Stimuli-responsive materials prepared from carboxymethyl chitosan and poly(γ-glutamic acid) for protein delivery

The development of stimuli-responsive materials in response to the molecules involved in biological processes has gained increased attentions. In this work, carboxymethyl chitosan (CM-chitosan) and poly(γ-glutamic acid) (pGlu) were reacted with a naturally occurring compound, genipin, leading to the formation of genipin-crosslinked CM-chitosan/pGlu conjugates with fluorescence emissions. The genipin-conjugated polymers were sensitive to the oxidation product of glucose, gluconic acid and hydrogen peroxide (H₂O₂). Fluorescence emissions of the polymers were quenched by gluconic acid and H₂O₂. An increase in the hydrodynamic diameter together with the quenching of fluorescence indicated that the genipin-conjugated polymers were self-aggregated into nanoparticles, in response to the stimulus of gluconic acid (but not for H₂O₂). Bovine serum albumin (BSA) could be loaded in the self-aggregated nanoparticles, and the incorporated BSA slowly released from the nanoparticles under hyper-gluconic acid conditions. This material is hence proposed as a stimuli-responsive material for optical sensing and protein delivery purposes.     

Studies on the UV spectrum of poly(γ-glutamic acid) based on development of a simple quantitative method

A simple and valid ultraviolet (UV) spectrophotometric method for the determination of poly(γ-glutamic acid) is developed. The method is based on the UV absorption spectrum of γ-PGA in aqueous solution, which exhibits a maximum absorption wavelength at 216 nm. The results obtained were comparable to those obtained with the reported high-performance liquid chromatography (HPLC) method according to ICH guidelines. Under the proposed procedure, the calibration graph is linear over the range of 20-200 μg/ml with regression correlation coefficient of 0.9997. Precision (%R.S.D.<1.50) and recovery (%R.>99.29%) are good. The limit of detection (LOD) and limit of quantitation (LOQ) are 0.39 and 1.19 μg/ml, respectively. These results agree well with those of HPLC method. Its spectrum properties studies showed that the spectrum of γ-PGA remarkably changed with an increase in temperature due to γ-PGA was digested into glutamate monomer. In spite of this, the determining procedure could carried out in a wide temperature range (25-50°C). In addition, the method is not influenced by the molecular weight, but the measurement system need to control in pH 3.0-10.0 and ionic strength not more than 0.5M. The proposed method is applied successfully for high-throughput quantification of poly(γ-glutamic acid) in biological samples. The advantages of the UV method are simplicity of operation, rapidity, sensitive, low-cost and high-throughput.     

Investigation of polymer and nanoparticle properties with nicotinic acid and p-aminobenzoic acid grafted on poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) via click chemistry

In this study, the grafting of nicotinic acid and p-aminobenzoic acid (PABA) onto poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) was performed by Huisgen's 1,3-dipolar cycloaddition, also known as click chemistry. Concentrations used for grafting were 0.10, 0.20, and 0.30 molar ratios with respect to caproyl units. The grafted copolymers were successfully obtained at all ratios as confirmed by NMR, GPC, and FT-IR. According to the DSC results, the polymorphisms of these grafted copolymers were mostly changed from semicrystalline to amorphous depending on the type and the amount of grafting compounds. TGA thermograms showed different thermal stabilities of the grafted copolymers compared to the original copolymers. Cytotoxicity results from HUVEC models suggested that the toxicity of grafted nanoparticles increased with the molar ratios of grafting units. Due to differences in molecular structure between nicotinic acid and PABA, physicochemical properties (particle size and surface charge) of grafted copolymer nanoparticles were substantially different. With increasing molar ratio of the grafting units, the particle size of blank nanoparticles tended to increase, resulting from an increase in the hydrophobic fragments of the grafted copolymer. Ibuprofen was chosen as a model drug to evaluate the interaction between grafted copolymers and loaded drug. After ibuprofen loading, the particle size of the loaded nanoparticles of both grafted copolymers increased compared to that of the blank nanoparticles. Significant differences in loading capacity between nicotinic acid and PABA grafted copolymer nanoparticles were clearly shown. This is most likely a result of different compatibility between each grafting compound and ibuprofen, including hydrogen bond interaction, π-π stacking interaction, and steric hindrance.     

Synthesis and solution behavior of poly(ε-caprolactone) grafted hydroxyethyl cellulose copolymers

Trimethylsilylated hydroxyethyl cellulose (TMSHEC) was synthesized by using hexamethyldisilazane (HMDS) as silylated agent. With the partial protection of hydroxyl groups of HEC by silylation, the novel poly(?-polycaprolactone) (PCL) grafted HEC (HEC-g-PCL) copolymers were successfully prepared by homogenous ring-opening graft polymerization and deprotection procedure. The structure of HEC-g-PCL copolymers was characterized by FTIR and 1H NMR. Fluorescence spectrum of HEC-g-PCL copolymer dilute solution indicated that copolymers could associate and form hydrophobic microdomains in aqueous solution. With the increasing of grafted PCL content, the critical association concentration (cac) of HEC-g-PCL copolymers decreased. The surface tension of HEC-g-PCL copolymers decreased dramatically with the increasing of the concentration and then approached to a plateau value when concentration was above the cac of HEC-g-PCL copolymers. The hydrodynamic radius of the aggregate of copolymer in dilute solution was found to increase with the increasing of the grafted PCL content. When the concentration of copolymer was above the cac, the zero-shear viscosity of the copolymer increased sharply and became much higher than that of HEC at the same concentration.     

Fabrication of highly porous scaffolds for tissue engineering based on star-shaped functional poly(ε-caprolactone)

The potential of novel functional star‐shaped poly(ε‐caprolactone)s of controlled molecular weight and low molecular weight distribution bearing acrylate end groups as material for biomedical applications was demonstrated in this study. The polymers were functionalized via Michael‐type addition of amino acid esters containing amino or thiol groups showing the potential for immobilization of biomolecules. Furthermore, scaffolds of different geometries were prepared by uniaxial freezing of polymer solutions followed by freeze drying. Different solvents and polymer concentrations were investigated, resulting in scaffolds with porosities between 76 and 96%. Mechanical properties of the scaffolds were investigated and the morphology was determined via scanning electron microscopy. Scaffolds with interconnected channels were prepared using benzene, 1,2‐dichloroethane or dioxane as solvent. The tubular longitudinal pores in honeycomb arrangement extend throughout the full extent of the scaffolds (typical pore sizes: 20–100 µm). Biotechnol. Bioeng. 2011; 108:694–703. © 2010 Wiley Periodicals, Inc.     

Influence of partition parameters on a recombinant antigen of Schistosoma mansoni expressed on E. coli using poly(ethylene glycol)–hydroxypropyl starch aqueous two-phase system

This work describes the partition of a Schistosoma mansoni tegumental antigen produced by a recombinant Escherichia coli strain using an aqueous two-phase system (ATPS) composed of polyethylene glycol (PEG) and purified hydroxypropyl-starch (Reppal PES 100). The effects of the polymer molecular weight, tie line length and pH on antigen partitioning were investigated. The detection of the antigen in both phases was determined by ELISA. The system composed of PEG 8000 (5.1% w/w) and Reppal PES 100 (13.0% w/w) led to a yield of 92% and a purification factor of 12 concerning the antigen in the PEG-rich phase. It was observed that antigen partition in ATPSs was strongly affected by the pH and tie line length. In addition, it was possible in a single step, to remove the cell debris, which precipitated at the interface of the system.     

Fractionation of functional polystyrenes,poly(ethylene oxide)s and poly(styrene)–b–poly(ethylene oxide) by liquid chromatography at the exclusion–adsorption transition point

The paper reports the fractionation of functional polystyrenes (PSs) and poly(ethylene oxide)s (PEOs) as well as their block copolymers, by liquid chromatography at the exclusion adsorption transition point (EATP–LC), also called “critical conditions” mode. In this specific elution mode (EATP–LC), the fractionation is only governed by the nature and the number of functions attached to the polymer backbone, independent of the molar mass distribution of the whole sample. Functional polystyrenes (α- and/or α,ω-alcohol-, acetal-, aldehyde- and acidic-PS) could be readily separated from non-functional polystyrenes under various chromatographic conditions. The technique also allowed the fractionation of poly(ethylene oxide)s and PS–PEO block copolymers. In the latter cases, moderately polar columns (grafted silica) and water-based polar eluents were required to obtain a satisfactory fractionation.