Production and immobilization of a novel thermoalkalophilic extracellular amylase from bacilli isolate

A Thermoalkalophilic amylase was produced from an environmental bacterial isolate. The enzyme was then immobilized through its amino groups onto the epoxy rings of magnetic poly glycidyl methacrylate [m-poly (GMA)] beads. The free enzyme was active within a large pH range, between 7 and 12 and displayed the optimum activity at 95°C and pH 10. The immobilization appeared to increase the stability of the enzyme as its bound form showed optimum activity at 105°C and pH 11.0. Kinetic studies demonstrated that immobilized enzyme had higher K(m) and lower V(max) values. The activity of the free and bound enzyme was determined, at 37°C and pH 10.0 and pH 11.0, respectively, in the presence of various organic solvents and detergents (5%, v/v). Results obtained indicated that detergents, sodium dodecyl sulfate (SDS) and TritonX-100, caused six fold increase and that various organic solvents also increased the activity of the amylase.     

Immobilization of β-d-galactosidase from Kluyveromyces lactis on functionalized silicon dioxide nanoparticles: characterization and lactose hydrolysis

β-D-Galactosidase (BGAL) from Kluyveromyces lactis was covalently immobilized to functionalized silicon dioxide nanoparticles (10-20 nm). The binding of the enzyme to the nanoparticles was confirmed by Fourier transform-infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Functionalized nanoparticles showed 87% immobilization yield. Soluble and immobilized enzyme preparation exhibited pH-optima at pH 6.5 and 7.0, respectively, with temperature optima at 35 and 40°C, respectively. Michaelis constant (K(m)) was 4.77 and 8.4mM for free and immobilized BGAL, respectively. V(max) for the soluble and immobilized enzyme was 12.25 and 13.51 U/ml, respectively. Nanoparticle immobilized BGAL demonstrated improved stability after favoring multipoint covalent attachment. Thermal stability of the immobilized enzyme was enhanced at 40, 50 and 65°C. Immobilized nanoparticle-enzyme conjugate retained more than 50% enzyme activity up to the eleventh cycle. Maximum lactose hydrolysis by immobilized BGAL was achieved at 8h.     

Single step purification and characterization of a thermostable and calcium independent α-amylase from Bacillus amyloliquifaciens TSWK1-1 isolated from Tulsi Shyam hot spring reservoir, Gujarat (India)

A thermophilic bacteria, identified and designated as Bacillus amyloliquifaciens TSWK1-1 (16S rRNA gene sequence, GenBank: GQ121033), was isolated from a hot water reservoir located at Tulsi Shyam, Gujarat, India. The optimum temperature and pH for amylase production were 50 °C and 7.0, respectively. The crude enzyme was partially purified by ammonium sulphate fractionation followed by dialysis. However, single step purification was achieved on Phenyl Sepharose 6FF affinity column with 45.71% yield, 8000 U/mg specific activity and 13.33 fold purification. The molecular weight of the purified α-amylase was 43 kD. The optimal temperature and pH for amylase activity were 70 °C and 7.0, respectively; however, the purified amylase was stable at broad temperature and pH range. The purified amylase did not require Ca(++) and K(+); however, it was moderately affected by Mg(++) and Cu(++) and significantly inhibited by Na(+) and Fe(++). The amylase was highly thermostable and remained active for 24h at 60 °C, for 12h at 70 °C and up to 3h even at 90 °C. Other unique features of the enzyme were calcium independent nature and resistance against chemical denaturation by Urea and Guanidine-HCl. The data on the enzymatic stability at different levels of purity would add significantly to the knowledge of amylases.     

Partial purification and properties of a laundry detergent compatible alkaline protease from a newly isolated <Emphasis Type="Italic">Bacillus</Emphasis> species Y

Alkaline protease production by a newly isolated Bacillus species from laundry soil was studied for detergent biocompatibility. From its morphological and nucleotide sequence (about 1.5 kb) of its 16S rDNA it was identified as Bacillus species with similarity to Bacillus species Y (Gen Bank entry: ABO 55095), and close homology with Bacillus cohnii YN-2000 (Gen Bank entry: ABO23412). Partial purification of the enzyme by ammonium sulfate (50–70% saturation) yielded 8-fold purity. Casein zymography and Sodium dodecylsulphate-Polyacrylamide gel electrophoresis (SDS-PAGE) of the partially purified enzyme revealed two isozymes of molecular sizes approximately 66 kDa and 18 kDa, respectively. The enzyme was most active at pH 12 and 50°C. At pH 12 the enzyme was stable for 5 h and retained 60% activity. The enzyme retained 44% activity at 50°C up to 2 h. The protease showed good hydrolysis specificity with different substrates tested. The presence of Mn²⁺, Co²⁺ and ethylenediaminetetracetic acid (EDTA) showed profound increase in protease activity. The protease of Bacillus species Y showed excellent stability and compatibility with three locally available detergents (Kite, Tide and Aerial) up to 3 h retaining almost 70–80% activity and 10–20% activity at room temperature (30°C) and 50°C, respectively, indicating the potential role of this enzyme for detergent application.     

Immobilization of α-amylase on gum acacia stabilized magnetite nanoparticles,an easily recoverable and reusable support

In this work, α-amylase is immobilized, using glutaraldehyde, onto magnetite nanoparticles prepared using gum acacia as the steric stabilizer (GA-MN), for the first time. The immobilization of amylase to GA-MN is very fast and the synthesis of GA-MN is very simple. The use of GA enables higher immobilization of α-amylase (60%), in contrast to the unmodified magnetite nanoparticles (∼20%). The optimum pH and temperature for maximum enzyme activity for the immobilized amylase are identified to be 7.0 and 40 °C, respectively, for the hydrolysis of starch. The kinetic studies confirm the Michaelis–Menten behavior and suggests overall enhancement in the performance of the immobilized enzyme with reference to the free enzyme. Similarly the thermal stability of the enzyme is found to increase after the immobilization. The GA-MN bound amylase has also been demonstrated to be capable of being reused for at least six cycles while retaining ∼70% of the initial activity. By using a magnetically active support, quick separation of amylase from reaction mixture is enabled. The catalytic rate of amylase is actually found to enhance by twofold after the immobilization, which is extremely advantageous in industry. At higher temperature, the immobilized enzyme exhibits higher enzyme activity than that of the free enzyme.     

Covalent immobilization of ω-transaminase from Vibrio fluvialis JS17 on chitosan beads

Chitosan beads were prepared by emulsion method and used for the immobilization of ω-transaminase of Vibrio fluvialis. The yield of enzyme immobilization (54.3%) and its residual activity (17.8%) were higher than those obtained with other commercial beads. ω-Transaminase was effectively immobilized on the chitosan beads at pH 6.0. The optimal pH of the immobilized enzyme was pH 9.0, which is the same as that of the free enzyme. The immobilized enzyme on chitosan beads retained ca. 77% of its conversion after five consecutive reactions with the 25 mM substrate, while the immobilized enzyme on Eupergit^® C retained 12%. Also, the immobilized ω-transaminase on chitosan bead retained 70% of initial activity when it's stored at 4 °C for 3.5 weeks. Addition of the co-factor, pyridoxal 5-phosphate (PLP), was needed to maintain the stability of the immobilized ω-transaminase.     

Adsorption of peroxidase on Celite 545 directly from ammonium sulfate fractionated white radish (Raphanus sativus) proteins

This paper demonstrates the direct immobilization of peroxidase from ammonium sulfate fractionated white radish proteins on an inorganic support, Celite 545. The adsorbed peroxidase was crosslinked by using glutaraldehyde. The activity yield for white radish peroxidase was adsorbed on Celite 545 was 70% and this activity was decreased and remained 60% of the initial activity after crosslinking by glutaraldehyde. The pH and temperature-optima for both soluble and immobilized peroxidase was at pH 5.5 and 40°C. Immobilized peroxidase retained higher stability against heat and water-miscible organic solvents. In the presence of 5.0 mM mercuric chloride, immobilized white radish peroxidase retained 41% of its initial activity while the free enzyme lost 93% activity. Soluble enzyme lost 61% of its initial activity while immobilized peroxidase retained 86% of the original activity when exposed to 0.02 mM sodium azide for 1 h. The K_m values were 0.056 and 0.07 mM for free and immobilized enzyme, respectively. Immobilized white radish peroxidase exhibited lower V_max as compared to the soluble enzyme. Immobilized peroxidase preparation showed better storage stability as compared to its soluble counterpart.     

Glucose oxidase immobilization on a novel cellulose acetate-polymethylmethacrylate membrane

Glucose oxidase (GOD) was immobilized on cellulose acetate-polymethylmethacrylate (CA-PMMA) membrane. The immobilized GOD showed better performance as compared to the free enzyme in terms of thermal stability retaining 46% of the original activity at 70 degrees C where the original activity corresponded to that obtained at 20 degrees C. FT-IR and SEM were employed to study the membrane morphology and structure after treatment at 70 degrees C. The pH profile of the immobilized and the free enzyme was found to be similar. A 2.4-fold increase in Km value was observed after immobilization whereas Vmax value was lower for the immobilized GOD. Immobilized glucose oxidase showed improved operational stability by maintaining 33% of the initial activity after 35 cycles of repeated use and was found to retain 94% of activity after 1 month storage period. Improved resistance against urea denaturation was achieved and the immobilized glucose oxidase retained 50% of the activity without urea in the presence of 5M urea whereas free enzyme retained only 8% activity.     

Cloning of a gene encoding β-glucosidase from Chaetomium thermophilum CT2 and its expression in Pichia pastoris

A new thermostable β-glucosidase gene (bgl) from Chaetomium thermophilum CT2 was cloned, sequenced and expressed. The full-length DNA of bgl was 3,101 bp and included three introns. The full-length cDNA contained an open reading frame of 2,604-bp nucleotides, encoding 867 amino acids with a potential secretion signal. The C. thermophilum CT2 β-glucosidase gene was functionally expressed in Pichia pastoris. The purified recombinant β-glucosidase was a 119-kDa glycoprotein with an optimum catalytic activity at pH 5.0 and 60°C. The enzyme was stable at 50°C, and retained 67.7% activity after being kept at 60°C for 1 h; the half-time of the enzyme at 65°C was approximately 55 min, and even retained 29.7% activity after incubation at 70°C for 10 min.     

Immobilization of acetylcholinesterase in nanofibrous PVA/BSA membranes by electrospinning

Electrospinning, a simple and versatile method to fabricate nanofibrous supports, has attracted continuous attention in the field of enzyme immobilization. In this study, acetylcholinesterase (AChE) has been successfully immobilized in PVA nanofibers via electrospinning of a mixture of AChE, BSA as an enzyme stabilizing additive and PVA. The maximum activity recovery of immobilized AChE was about 40%. In comparison with free enzyme, the immobilized AChE showed improved stability while retaining a considerable amount of activity at lower pH values. Moreover, the immobilized AChE retained >34% of its initial activity when stored at 30°C for 100 days and retained 70% of its initial activity after ten consecutive reactor batch cycles.     

The potential of immobilized bacterial α-amylase on coconut coir,a smart carrier for biocatalysts

Purified α-amylase from a soil bacterium Bacillus sp. SKB4 was immobilized on coconut coir, an inexpensive cellulosic fiber, with the cross-linking agent glutaraldehyde. The catalytic properties and stability of the immobilized enzyme were compared with those of its soluble form. The enzyme retained 97.2% of its activity and its catalytic properties were not drastically altered after immobilization. The pH optimum and stability of the immobilized enzyme were shifted towards the alkaline range compared to the free enzyme. The optimum temperature for enzymatic activity was 90°C in both forms of the enzyme. The soluble and immobilized enzyme retained 19% and 70% of original activity, respectively, after pre-incubation for 1 h at 90°C. Immobilized amylase was less susceptible to attack by heavy metal ions and showed higher K_m and V_max values than its free form. The bound enzyme showed significant activity and stability after 6 months of storage at 4°C. All of these characteristics make the new carrier system suitable for use in the bioprocess and food industries.     

Immobilization of chitosan-invertase neoglycoconjugate on carboxymethylcellulose-modified chitin

Saccharomyces cerevisiae invertase, chemically modified with chitosan, was immobilized on a carboxymethylcellulose-coated chitin support via polyelectrolyte complex formation. The yield of immobilized protein was determined to be 72% and the enzyme retained 68% of the initial invertase activity. The optimum temperature for invertase was increased by 5 degrees C and its thermostability was enhanced by about 9 degrees C after immobilization. The immobilized enzyme was stable against incubation in high ionic strength solutions and was 12.6-fold more resistant to thermal treatment at 65 degrees C than the native counterpart. The prepared biocatalyst retained 98% and 100% of the original catalytic activity after 10 cycles of reuse and 70 h of continuous operational regime in a packed bed reactor, respectively. The immobilized enzyme retained 95% of its activity after 50 days of storage at 37 degrees C.     

Reactivation of a thermostable lipase by solid phase unfolding/refolding effect of cysteine residues on refolding efficiency

Lipase from Geobacillus thermocatenulatus (BTL2) was immobilized in two different matrixes. In one derivative, the enzyme was immobilized on agarose activated with cyanogen bromide (CNBr-BTL2) via its most reactive superficial amino group, whereas the other derivative was covalently immobilized on glyoxyl agarose supports (Gx-BTL2). The latter immobilization protocol leads to intense multipoint covalent attachment between the lysine richest region of enzyme and the glyoxyl groups on the support surface. The resulted solid derivatives were unfolded by incubation under high concentrations of guanidine and then resuspended in aqueous media under different experimental conditions. In both CNBr-BTL2 and Gx-BTL2 derivatives, the oxidation of Cys residues during the unfolding/refolding processes led to inefficient folding for the enzyme because only 25-30% of its initial activity was recovered after 3 h in refolding conditions. Dithiothreitol (DTT), a very mild reducing agent, prevented Cys oxidation during the unfolding/refolding process, greatly improving activity recovery in the refolded forms. In parallel, other variables such as pH, buffer composition and the presence of polymers and other additives, had different effects on refolding efficiencies and refolding rates for both derivatives. In the case of solid derivatives of BTL2 immobilized on CNBr-agarose, the surface's chemistry was crucial to guarantee an optimal protein refolding. In this way, uncharged protein vicinities resulted in better refolding efficiencies than those charged ones.     

Silanized palygorskite for lipase immobilization

Lipase from Candida lipolytica has been immobilized on 3-aminopropyltriethoxysilane-modified palygorskite support. Scanning electron micrographs proved the covalently immobilization of C. lipolytica lipase on the palygorskite support through glutaraldehyde. Using an optimized immobilization protocol, a high activity of 3300 U/g immobilized lipase was obtained. Immobilized lipase retained activity over wider ranges of temperature and pH than those of the free enzyme. The optimum pH of the immobilized lipase was at pH 7.0–8.0, while the optimum pH of free lipase was at 7.0. The retained activity of the immobilized enzyme was improved both at lower and higher pH in comparison to the free enzyme. The immobilized enzyme retained more than 70% activity at 40 °C, while the free enzyme retained only 30% activity. The immobilization stabilized the enzyme with 81% retention of activity after 10 weeks at 30 °C whereas most of the free enzyme was inactive after a week. The immobilized enzyme retains high activity after eight cycles. The kinetic constants of the immobilized and free lipase were also determined. The K_m and V_max values of immobilized lipase were 0.0117 mg/ml and 4.51 μmol/(mg min), respectively.     

Preparative-scale kinetic resolution of racemic styrene oxide by immobilized epoxide hydrolase

Epoxide hydrolase from Aspergillus niger was immobilized onto the modified Eupergit C 250 L through a Schiff base formation. Eupergit C 250 L was treated with ethylenediamine to introduce primary amine groups which were subsequently activated with glutaraldehyde. The amount of introduced primary amine groups was 220 μmol/g of the support after ethylenediamine treatment, and 90% of these groups were activated with glutaraldehyde. Maximum immobilization of 80% was obtained with modified Eupergit C 250 L under the optimized conditions. The optimum pH was 7.0 for the free epoxide hydrolase and 6.5 for the immobilized epoxide hydrolase. The optimum temperature for both free and immobilized epoxide hydrolase was 40 °C. The free epoxide hydrolase retained 52 and 33% of its maximum activity at 40 and 60 °C, respectively after 24h preincubation time whereas the retained activities of immobilized epoxide hydrolase at the same conditions were 90 and 75%, respectively. Immobilized epoxide hydrolase showed about 2.5-fold higher enantioselectivity than that of free epoxide hydrolase. A preparative-scale (120 g/L) kinetic resolution of racemic styrene oxide using immobilized preparation was performed in a batch reactor and (S)-styrene oxide and (R)-1-phenyl-1,2-ethanediol were both obtained with about 50% yield and 99% enantiomeric excess. The immobilized epoxide hydrolase was retained 90% of its initial activity after 5 reuses.     

Immobilization of glucose oxidase on Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/SiO<Subscript>2</Subscript> magnetic nanoparticles

Glucose oxidase (GOD) was covalently immobilized onto Fe₃O₄/SiO₂ magnetic nanoparticles (FSMNs) using glutaraldehyde (GA). Optimal immobilization was at pH 6 with 3-aminopropyltriethoxysilane at 2% (v/v), GA at 3% (v/v) and 0.143 g GOD per g carrier. The activity of immobilized GOD was 4,570 U/g at pH 7 and 50°C. The immobilized GOD retained 80% of its initial activity after 6 h at 45°C while free enzyme retained only 20% activity. The immobilized GOD maintained 60% of its initial activity after 6 cycles of repeated use and retained 75% of its initial activity after 1 month at 4°C whereas free enzymes retained 62% of its activity.     

Silica-encapsulated magnetic nanoparticles: enzyme immobilization and cytotoxic study

Silica-encapsulated magnetic nanoparticles (MNPs) were prepared via microemulsion method. The products were characterized by high resolution transmission electron microscopy (HRTEM) and energy-dispersive X-ray spectrum (EDS). MNPs with no observed cytotoxic activity against human lung carcinoma cell and brine shrimp lethality were used as suitable support for glucose oxidase (GOD) immobilization. Binding of GOD onto the support was confirmed by the FTIR spectra. The amount of immobilized GODs was 95 mg/g. Storage stability study showed that the immobilized GOD retained 98% of its initial activity after 45 days and 90% of the activity was also remained after 12 repeated uses. Considerable enhancements in thermal stabilities were observed for the immobilized GOD at elevated temperatures up to 80°C and the activity of immobilized enzyme was less sensitive to pH changes in solution.     

Bioconversion of D-galactose to D-tagatose: continuous packed bed reaction with an immobilized thermostable L-arabinose isomerase and efficient purification by selective microbial degradation

The continuous enzymatic conversion of D-galactose to D-tagatose with an immobilized thermostable L-arabinose isomerase in packed-bed reactor and a novel method for D-tagatose purification were studied. L-arabinose isomerase from Thermoanaerobacter mathranii (TMAI) was recombinantly overexpressed and immobilized in calcium alginate. The effects of pH and temperature on D-tagatose production reaction catalyzed by free and immobilized TMAI were investigated. The optimal condition for free enzyme was pH 8.0, 60°C, 5 mM MnCl(2). However, that for immobilized enzyme was pH 7.5, 75°C, 5 mM MnCl(2). In addition, the catalytic activity of immobilized enzyme at high temperature and low pH was significantly improved compared with free enzyme. The optimum reaction yield with immobilized TMAI increased by four percentage points to 43.9% compared with that of free TMAI. The highest productivity of 10 g/L h was achieved with the yield of 23.3%. Continuous production was performed at 70°C; after 168 h, the reaction yield was still above 30%. The resultant syrup was then incubated with Saccharomyces cerevisiae L1 cells. The selective degradation of D-galactose was achieved, obtaining D-tagatose with the purity above 95%. The established production and separation methods further potentiate the industrial production of D-tagatose via bioconversion and biopurification processes.     

Rationally selected single-site mutants of the Thermoascus aurantiacus endoglucanase increase hydrolytic activity on cellulosic substrates

Variants of the Thermoascus aurantiacus Eg1 enzyme with higher catalytic efficiency than wild-type were obtained via site-directed mutagenesis. Using a rational mutagenesis approach based on structural bioinformatics and evolutionary analysis, two positions (F16S and Y95F) were identified as priority sites for mutagenesis. The mutant and parent enzymes were expressed and secreted from Pichia pastoris and the single site mutants F16S and Y95F showed 1.7- and 4.0-fold increases in k(cat) and 1.5- and 2.5-fold improvements in hydrolytic activity on cellulosic substrates, respectively, while maintaining thermostability. Similar to the parent enzyme, the two variants were active between pH 4.0 and 8.0 and showed optimal activity at temperature 70°C at pH 5.0. The purified enzymes were active at 50°C for over 12 h and retained at least 80% of initial activity for 2 h at 70°C. In contrast to the improved hydrolysis seen with the single mutation enzymes, no improvement was observed with a third variant carrying a combination of both mutations, which instead showed a 60% reduction in catalytic efficiency. This work further demonstrates that non-catalytic amino acid residues can be engineered to enhance catalytic efficiency in pretreatment enzymes of interest.     

Immobilization of Aspergillus oryzae tannase and properties of the immobilized enzyme

Tannase enzyme from Aspergillus oryzae was immobilized on various carriers by different methods. The immobilized enzyme on chitosan with a bifunctional agent (glutaraldehyde) had the highest activity. The catalytic properties and stability of the immobilized tannase were compared with the corresponding free enzyme. The bound enzyme retained 20·3% of the original specific activity exhibited by the free enzyme. The optimum pH of the immobilized enzyme was shifted to a more acidic range compared with the free enzyme. The optimum temperature of the reaction was determined to be 40 °C for the free enzyme and 55 °C for the immobilized form. The stability at low pH, as well as thermal stability, were significantly improved by the immobilization process. The immobilized enzyme exhibited mass transfer limitation as reflected by a higher apparent K_m value and a lower energy of activation. The immobilized enzyme retained about 85% of the initial catalytic activity, even after being used 17 times.