Energy cover crops for biogas production increase soil organic carbon stocks: A modeling approach

Energy cover crops for biogas production through anaerobic digestion (AD) are inserted between two primary crops. They replace either bare soil or nonharvested cover crops, and their management is usually intensified to produce more biomass. They allow the production of renewable energy as well as digestate, used as an organic fertilizer, without directly competing with food production. Because of the increased biomass production and export and of the return of a digested biomass to the soil, the impact of energy cover crops on soil organic carbon (SOC) is questioned. The objective of this paper was to study the difference in SOC stocks induced by the introduction of energy cover crops for AD coupled with the application of the resulting amount of digestate. We used the AD model Sys-Metha combined with the soil C model AMG to simulate SOC stocks for 13 case studies in France, with scenarios comparing different intercrop management practices, with or without cover crops, harvested or not. Our results indicated that the higher biomass production of energy cover crops (from 6.7 to 11.1 t DM ha⁻¹) in comparison with nonharvested cover crops (2 t DM ha⁻¹) or bare soil led to higher humified C input (belowground input and digestate), despite the high C fraction exported in AD. This resulted in an increase in SOC stocks in comparison with nonharvested cover crops or bare soil (from 0.01 to 0.12 t C ha⁻¹ year⁻¹ over 30 years). The uncertainties in the model parameters did not modify these results. However, in the case of equal biomass production between energy cover crops and nonharvested cover crops, SOC stocks would be lower with energy cover crops.     

Cell Wall Composition and Bioenergy Potential of Rice Straw Tissues Are Influenced by Environment,Tissue Type,and Genotype

Breeding has transformed wild plant species into modern crops, increasing the allocation of their photosynthetic assimilate into grain, fiber, and other products for human use. Despite progress in increasing the harvest index, much of the biomass of crop plants is not utilized. Potential uses for the large amounts of agricultural residues that accumulate are animal fodder or bioenergy, though these may not be economically viable without additional efforts such as targeted breeding or improved processing. We characterized leaf and stem tissue from a diverse set of rice genotypes (varieties) grown in two environments (greenhouse and field) and report bioenergy-related traits across these variables. Among the 16 traits measured, cellulose, hemicelluloses, lignin, ash, total glucose, and glucose yield changed across environments, irrespective of the genotypes. Stem and leaf tissue composition differed for most traits, consistent with their unique functional contributions and suggesting that they are under separate genetic control. Plant variety had the least influence on the measured traits. High glucose yield was associated with high total glucose and hemicelluloses, but low lignin and ash content. Bioenergy yield of greenhouse-grown biomass was higher than field-grown biomass, suggesting that greenhouse studies overestimate bioenergy potential. Nevertheless, glucose yield in the greenhouse predicts glucose yield in the field (ρ?=?0.85, p?<?0.01) and could be used to optimize greenhouse (GH) and field breeding trials. Overall, efforts to improve cell wall composition for bioenergy require consideration of production environment, tissue type, and variety.     

Suppression of a BAHD acyltransferase decreases p-coumaroyl on arabinoxylan and improves biomass digestibility in the model grass Setaria viridis

Grass cell walls have hydroxycinnamic acids attached to arabinosyl residues of arabinoxylan (AX), and certain BAHD acyltransferases are involved in their addition. In this study, we characterized one of these BAHD genes in the cell wall of the model grass Setaria viridis. RNAi silenced lines of S. viridis (SvBAHD05) presented a decrease of up to 42% of ester-linked p-coumarate (pCA) and 50% of pCA-arabinofuranosyl, across three generations. Biomass from SvBAHD05 silenced plants exhibited up to 32% increase in biomass saccharification after acid pre-treatment, with no change in total lignin. Molecular dynamics simulations suggested that SvBAHD05 is a p-coumaroyl coenzyme A transferase (PAT) mainly involved in the addition of pCA to the arabinofuranosyl residues of AX in Setaria. Thus, our results provide evidence of p-coumaroylation of AX promoted by SvBAHD05 acyltransferase in the cell wall of the model grass S. viridis. Furthermore, SvBAHD05 is a promising biotechnological target to engineer crops for improved biomass digestibility for biofuels, biorefineries and animal feeding.     

Let them eat (GM) straw

Approximately half of aboveground biomass of grain crops (straw) is wasted, with negative ecological and economic impact. Straw use could increase animal production by at least one third if lignin could be transgenically decreased or modified, rendering more carbohydrate available to ruminant animals. Such digestible straw can be upgraded by ammonification, which further separates lignin and serves as a nitrogen source for ruminant bacteria, or biotreatment with ligninolytic fungi and/or physical treatments. Such technologies could supply animal protein to an increasing population, while releasing more grain for direct human consumption without the need to put more land under plough.     

Disassembly of lignin and chemical recovery in supercritical water and p-cresol mixture. Studies on lignin model compounds

The aim of the study was to gain insight into the role of the each unit of lignin in the formation of products. Glycerol, guaiacol, the mixture of glycerol and guaiacol (Gly&Gua), and guaiacylglycerol-beta-guaiacyl ether (GGGE) were used as lignin model compounds to study fragmentation of lignin in an excess of water and p-cresol at 400 degrees C. The products have been analyzed employing gas chromatography (GC)-mass spectrometer (MS) and gas chromatography-frame ionization detector for qualitative and quantitative analysis. GC-MS analysis indicated that phenol, o-cresol, methyl-anisole, di-methyl-phenol, ethyl-methyl-phenol, 2-(hydroxy-benzyl)-4-methyl-phenol (BMP) and 2-(2-hydroxy-5-methyl-benzyl)-4-methyl-phenol were formed. The products were similar to the products by the fragmentation of lignin. The products, except o-cresol, were primarily derived from glycerol and/or guaiacol. We also found that the amount of BMP derived from GGGE, which has glycerol unit and guaiacol unit in its structure, is much more than that derived from Gly&Gua. The increase of the BMP yield by reaction with GGGE compared with (glycerol and/or guaiacol) indicates that guaiacylglycerol unit with linkage of Gly&Gua plays an important role in the formation of BMP and also it is suggested that the BMP formation from GGGE has pathways other than that from Gly&Gua.     

不同诱导培养基对糙皮侧耳液体发酵产漆酶活性的影响

利用1株糙皮侧耳Pleurotus ostreatus栽培菌株为材料,研究添加碱性木质素或者配合简单碳源或氮源后对其液体发酵产漆酶活性的影响。结果表明,不同诱导培养基对糙皮侧耳漆酶活性具有极显著的影响（P<0.001）,而且不同诱导培养基对糙皮侧耳菌丝生物量也产生了极显著的影响（P<0.001）。此外,只利用碱性木质素或者是再添加碳源葡萄糖均有利于糙皮侧耳产漆酶,既包括产漆酶酶活性的提升,同时也包括产漆酶时间的提前,但只利用碱性木质素诱导不利于菌丝生物量的积累;而富含简单碳/氮源的诱导培养基,无论是否含碱性木质素,均有利于菌丝生物量的积累,其中,富含简单碳/氮源的培养基中再添加碱性木质素后的菌丝生物量和漆酶活性均高于不添加碱性木质素时的菌丝生物量和漆酶活性。相比而言,含碱性木质素的培养基中测得的漆酶活性大部分时间下都要高于不含木质素的简单碳/氮源培养基,含碱性木质素的培养基对糙皮侧耳菌株产漆酶的诱导作用更强。     

Natural lignin modulators improve bagasse saccharification of sugarcane and energy cane in field trials

The burgeoning cellulosic ethanol industry necessitates advancements in enzymatic saccharification, effective pretreatments for lignin removal, and the cultivation of crops more amenable to saccharification. Studies have demonstrated that natural inhibitors of lignin biosynthesis can enhance the saccharification of lignocellulose, even in tissues generated several months post-treatment. In this study, we applied daidzin (a competitive inhibitor of coniferaldehyde dehydrogenase), piperonylic acid (a quasi-irreversible inhibitor of cinnamate 4-hydroxylase), and methylenedioxy cinnamic acid (a competitive inhibitor of 4-coenzyme A ligase) to 60-day-old crops of two conventional Brazilian sugarcane cultivars and two energy cane clones, bred specifically for enhanced biomass production. The resultant biomasses were evaluated for lignin content and enzymatic saccharification efficiency without additional lignin-removal pretreatments. The treatments amplified the production of fermentable sugars in both the sugarcane cultivars and energy cane clones. The most successful results softened the most recalcitrant lignocellulose to the level of the least recalcitrant of the biomasses tested. Interestingly, the softest material became even more susceptible to saccharification.     

Ethanol production from lignocellulosic biomass of energy cane

Ethanol produced from lignocellulosic biomass is a renewable alternative to diminishing petroleum based liquid fuels. The release of many new sugarcane varieties by the United States Department of Agriculture to be used as energy crops is a promising feedstock alternative. Energy cane produces large amounts of biomass that can be easily transported, and production does not compete with food supply and prices because energy cane can be grown on marginal land instead of land for food crops. The purpose of this study was to evaluate energy cane for lignocellulosic ethanol production. Energy cane variety L 79-1002 was pretreated with weak sulfuric acid to remove lignin. In this study, 1.4 M sulfuric acid pretreated type II energy cane had a higher ethanol yield after fermentation by Klebsiella oxytoca without enzymatic saccharification than 0.8 M and 1.6 M sulfuric acid pretreated type II energy cane. Pretreated biomass was inoculated with K. oxytoca for cellulose fermentation and Pichia stipitis for hemicellulose fermentation under simultaneous saccahrification and fermentation (SSF) and separate hydrolysis and fermentation (SHF) conditions. For enzymatic saccharification of cellulose, the cellulase and ??-glucanase cocktail significantly increased ethanol production compared to the ethanol production of fermented acid pretreated energy cane without enzymatic saccharification. The results revealed that energy cane variety L 79-1002 produced maximum cellulosic ethanol under SHF (6995 mg/L) and produced 3624 mg/L ethanol from fermentation of hemicellulosic sugars.     

Emerging strategies of lignin engineering and degradation for cellulosic biofuel production

Ethanol and other biofuels produced from lignocellulosic biomass represent a renewable, more carbon-balanced alternative to both fossil fuels and corn-derived or sugarcane-derived ethanol. Unfortunately, the presence of lignin in plant cell walls impedes the breakdown of cell wall polysaccharides to simple sugars and the subsequent conversion of these sugars to usable fuel. Recent advances in the understanding of lignin composition, polymerization, and regulation have revealed new opportunities for the rational manipulation of lignin in future bioenergy crops, augmenting the previous successful approach of manipulating lignin monomer biosynthesis. Furthermore, recent studies on lignin degradation in nature may provide novel resources for the delignification of dedicated bioenergy crops and other sources of lignocellulosic biomass.     

Expression of a bacterial 3‐dehydroshikimate dehydratase reduces lignin content and improves biomass saccharification efficiency

Lignin confers recalcitrance to plant biomass used as feedstocks in agro‐processing industries or as source of renewable sugars for the production of bioproducts. The metabolic steps for the synthesis of lignin building blocks belong to the shikimate and phenylpropanoid pathways. Genetic engineering efforts to reduce lignin content typically employ gene knockout or gene silencing techniques to constitutively repress one of these metabolic pathways. Recently, new strategies have emerged offering better spatiotemporal control of lignin deposition, including the expression of enzymes that interfere with the normal process for cell wall lignification. In this study, we report that expression of a 3‐dehydroshikimate dehydratase (QsuB from Corynebacterium glutamicum) reduces lignin deposition in Arabidopsis cell walls. QsuB was targeted to the plastids to convert 3‐dehydroshikimate – an intermediate of the shikimate pathway – into protocatechuate. Compared to wild‐type plants, lines expressing QsuB contain higher amounts of protocatechuate, p‐coumarate, p‐coumaraldehyde and p‐coumaryl alcohol, and lower amounts of coniferaldehyde, coniferyl alcohol, sinapaldehyde and sinapyl alcohol. 2D‐NMR spectroscopy and pyrolysis‐gas chromatography/mass spectrometry (pyro‐GC/MS) reveal an increase of p‐hydroxyphenyl units and a reduction of guaiacyl units in the lignin of QsuB lines. Size‐exclusion chromatography indicates a lower degree of lignin polymerization in the transgenic lines. Therefore, our data show that the expression of QsuB primarily affects the lignin biosynthetic pathway. Finally, biomass from these lines exhibits more than a twofold improvement in saccharification efficiency. We conclude that the expression of QsuB in plants, in combination with specific promoters, is a promising gain‐of‐function strategy for spatiotemporal reduction of lignin in plant biomass.     

Genetic modification of lignin biosynthesis for improved biofuel production

The energy in cellulosic biomass largely resides in plant cell walls. Cellulosic biomass is more difficult than starch to break down into sugars because of the presence of lignin and the complex structure of cell walls. Transgenic down-regulation of major lignin genes led to reduced lignin content, increased dry matter degradability, and improved accessibility of cellulases for cellulose degradation. This review provides background information on lignin biosynthesis and focuses on genetic manipulation of lignin genes in important monocot species as well as the dicot potential biofuel crop alfalfa. Reduction of lignin in biofuel crops by genetic engineering is likely one of the most effective ways of reducing costs associated with pretreatment and hydrolysis of cellulosic feedstocks, although some potential fitness issues should also be addressed.     

Optimization of Component Yields and Thermal Properties by Organosolv Fractionation of Loblolly Pine (<Emphasis Type="Italic">Pinus taeda</Emphasis>) Using Response Surface Design

Lignin, a low value by-product of biomass fractionation, is of current particular interest for the production of value added materials such as carbon fibers within a biorefinery. Accordingly, we have isolated lignin, hemicellulose, and cellulose by organosolv fractionation of loblolly pine (Pinus taeda) under the influence different fractionation severities (2.50–3.31). A designed experimental matrix targeted maximum lignin and pulp yields and lignin glass transition temperature (T_g) as a function of several process parameters. Optimal fractionation conditions were estimated from an enhanced regression model of the statistically significant variables generated using response surface design (RSD). The most significant factor influencing lignin and pulp yields was solvent composition (p-value <?0.0001). A maximum lignin yield of 94.71 wt% and maximum cellulose yield of 74.96 wt% were determined at combined severities of 3.21 and 2.63, respectively. The lowest T_g of 132.83 °C was found at a combined severity of 2.82.     

Improvement of biomass through lignin modification

Lignin, a major component of the cell wall of vascular plants, has long been recognized for its negative impact on forage quality, paper manufacturing, and, more recently, cellulosic biofuel production. Over the last two decades, genetic and biochemical analyses of brown midrib mutants of maize, sorghum and related grasses have advanced our understanding of the relationship between lignification and forage digestibility. This work has also inspired genetic engineering efforts aimed at generating crops with altered lignin, with the expectation that these strategies would enhance forage digestibility and/or pulping efficiency. The knowledge gained from these bioengineering efforts has greatly improved our understanding of the optimal lignin characteristics required for various applications of lignocellulosic materials while also contributing to our understanding of the lignin biosynthetic pathway. The recent upswing of interest in cellulosic biofuel production has become the new focus of lignin engineering. Populus trichocarpa and Brachypodium distachyon are emerging as model systems for energy crops. Lignin research on these systems, as well as on a variety of proposed energy crop species, is expected to shed new light on lignin biosynthesis and its regulation in energy crops, and lead to rational genetic engineering approaches to modify lignin for improved biofuel production.     

Land Use Implications of Increased Biomass Production Identified by GIS-Based Suitability and Yield Mapping for Miscanthus in England

The need for climate change mitigation and to meet increasing energy demands has led to a rise in the land area under bioenergy crops in many countries. There are concerns that such large-scale land conversion will conflict with food production and impact on the environment. Perennial biomass crops could be grown on more marginal agricultural land. However, for sustainable solutions, biomass yields will need to be sufficient and the wider implications of land-use changes considered. Here, focusing on Miscanthus in England as an example, we combined an empirical model with GIS to produce a yield map and estimated regional energy generation potentials after masking out areas covered by environmental and socio-economic factors which could preclude the planting of energy crops. Agricultural land quality and the distributions of currently grown food crops were then taken into account. Results showed that: (i) regional contrasts occur in the importance of different factors affecting biomass planting; (ii) areas with the highest biomass yields co-locate with food producing areas on high grade land, and; (iii) when such high grade land and unsuitable areas are excluded, a policy-related scenario for increased planting on 350,000 ha utilised 4–28% (depending on the region) of lower grade land and would not necessarily greatly impact on UK food security. We conclude that the GIS-based yield and suitability mapping described here can help identify important issues in bioenergy generation potentials and land use implications at regional or finer spatial scales that would be missed in analyses at the national level.     

Can Biomethane Potential (BMP) Be Predicted from Other Variables Such As Biochemical Composition in Lignocellulosic Biomass and Related Organic Residues?

The potential of methane production by anaerobic digestion of lignocellulosic biomass depends not only on the availability of the resources in the considered territory, but also on their physico-chemical characteristics. Relevant methods of characterization are, therefore, needed to select and possibly combine the most appropriate biomass substrates in order to optimize energy recovery through anaerobic digestion processes. The objective of the present study was to determine whether biomethane potential of such substrates could be predicted from a limited number of variables more rapidly or determined more easily. A set of 36 biomass substrates and organic residues from a variety of origins was analyzed for total and easily hydrosoluble organic matter fractions (volatile solid, VS and soluble chemical oxygen demand, SCOD), neutral detergent soluble fraction (SOL), hemicelluloses (HEM), cellulose (CELL), and lignin-like residual fractions (RES). Bioreactivity of all samples was also measured by experimental assays (biochemical oxygen demand, BOD and biochemical methane potential, BMP). The whole set of data thereby obtained was analyzed statistically considering one dependent variable (BMP), and six independent variables (SCOD, SOL, HEM, CELL, RES, and BOD). Partial least square (PLS) analysis revealed very clearly a positive correlation between BMP and BOD, which were both anti-correlated with RES. On the other hand, no correlations were observed between BMP, SCOD, HEM, and CELL contents. PLS analysis showed that BMP was significantly correlated to the six independent variables. The most influential variables were found to be RES and BOD, and a polynomial model was successfully validated for the prediction of BMP from RES and BOD.     

The Minor Wall-Networks between Monolignols and Interlinked-Phenolics Predominantly Affect Biomass Enzymatic Digestibility in Miscanthus

Plant lignin is one of the major wall components that greatly contribute to biomass recalcitrance for biofuel production. In this study, total 79 representative Miscanthus germplasms were determined with wide biomass digestibility and diverse monolignol composition. Integrative analyses indicated that three major monolignols (S, G, H) and S/G ratio could account for lignin negative influence on biomass digestibility upon NaOH and H₂SO₄ pretreatments. Notably, the biomass enzymatic digestions were predominately affected by the non-KOH-extractable lignin and interlinked-phenolics, other than the KOH-extractable ones that cover 80% of total lignin. Furthermore, a positive correlation was found between the monolignols and phenolics at p<0.05 level in the non-KOH-extractable only, suggesting their tight association to form the minor wall-networks against cellulases accessibility. The results indicated that the non-KOH-extractable lignin-complex should be the target either for cost-effective biomass pretreatments or for relatively simply genetic modification of plant cell walls in Miscanthus.     

Grass lignin acylation: <Emphasis Type="Italic">p</Emphasis>-coumaroyl transferase activity and cell wall characteristics of C3 and C4 grasses

Grasses are a predominant source of nutritional energy for livestock systems around the world. Grasses with high lignin content have lower energy conversion efficiencies for production of bioenergy either in the form of ethanol or to milk and meat through ruminants. Grass lignins are uniquely acylated with p-coumarates (pCA), resulting from the incorporation of monolignol p-coumarate conjugates into the growing lignin polymer within the cell wall matrix. The required acyl-transferase is a soluble enzyme (p-coumaroyl transferase, pCAT) that utilizes p-coumaroyl-CoenzymeA (pCA-CoA) as the activated donor molecule and sinapyl alcohol as the preferred acceptor molecule. Grasses (C3and C4) were evaluated for cell wall characteristics; pCA, lignin, pCAT activity, and neutral sugar composition. All C3 and C4 grasses had measurable pCAT activity, however the pCAT activities did not follow the same pattern as the pCA incorporation into lignin as expected.