Single nucleotide polymorphism genotyping in polyploid wheat with the Illumina GoldenGate assay

Single nucleotide polymorphisms (SNPs) are indispensable in such applications as association mapping and construction of high-density genetic maps. These applications usually require genotyping of thousands of SNPs in a large number of individuals. Although a number of SNP genotyping assays are available, most of them are designed for SNP genotyping in diploid individuals. Here, we demonstrate that the Illumina GoldenGate assay could be used for SNP genotyping of homozygous tetraploid and hexaploid wheat lines. Genotyping reactions could be carried out directly on genomic DNA without the necessity of preliminary PCR amplification. A total of 53 tetraploid and 38 hexaploid homozygous wheat lines were genotyped at 96 SNP loci. The genotyping error rate estimated after removal of low-quality data was 0 and 1% for tetraploid and hexaploid wheat, respectively. Developed SNP genotyping assays were shown to be useful for genotyping wheat cultivars. This study demonstrated that the GoldenGate assay is a very efficient tool for high-throughput genotyping of polyploid wheat, opening new possibilities for the analysis of genetic variation in wheat and dissection of genetic basis of complex traits using association mapping approach. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

BAC-based upgrading and physical integration of a genetic SNP map in Atlantic salmon

A better understanding of the genotype–phenotype correlation of Atlantic salmon is of key importance for a whole range of production, life history and conservation biology issues attached to this species. High-density linkage maps integrated with physical maps and covering the complete genome are needed to identify economically important genes and to study the genome architecture. Linkage maps of moderate density and a physical bacterial artificial chromosome (BAC) fingerprint map for the Atlantic salmon have already been generated. Here, we describe a strategy to combine the linkage mapping with the physical integration of newly identified single nucleotide polymorphisms (SNPs). We resequenced 284 BAC-ends by PCR in 14 individuals and detected 180 putative SNPs. After successful validation of 152 sequence variations, genotyping and genetic mapping were performed in eight salmon families comprising 376 individuals. Among these, 110 SNPs were positioned on a previously constructed linkage map containing SNPs derived from expressed sequence tag (EST) sequences. Tracing the SNP markers back to the BACs enabled the integration of the genetic and physical maps by assigning 73 BAC contigs to Atlantic salmon linkage groups.     

The identification of SNPs with indeterminate positions using the Equine SNP50 BeadChip

We have used linkage disequilibrium (LD) to identify single nucleotide polymorphisms (SNPs) on the Illumina Equine SNP50 BeadChip, which may be incorrectly positioned on the genome map. A total of 1201 Thoroughbred horses were genotyped using the Illumina Equine SNP50 BeadChip. LD was evaluated in a pairwise fashion between all autosomal SNPs, both within and across chromosomes. Filters were then applied to the data, firstly to identify SNPs that may have been mapped to the wrong chromosome and secondly to identify SNPs that may have been incorrectly positioned within chromosomes. We identified a single SNP on ECA28, which showed low LD with neighbouring SNPs but considerable LD with a group of SNPs on ECA10. Furthermore, a cluster of SNPs on ECA5 showed unusually low LD with surrounding SNPs. A total of 39 SNPs met the criteria for unusual within-chromosome LD. The results of this study indicate that some SNPs may be misplaced. This finding is significant, as misplaced SNPs may lead to difficulties in the application of genomic methods, such as homozygosity mapping, for which SNP order is important.     

Development and characterisation of an expressed sequence tags (EST)-derived single nucleotide polymorphisms (SNPs) resource in rainbow trout

ABSTRACT: BACKGROUND: There is considerable interest in developing high-throughput genotyping with singlenucleotide polymorphisms (SNPs) for the identification of genes affecting importantecological or economical traits. SNPs are evenly distributed throughout the genome and arelikely to be functionally relevant. In rainbow trout, in silico screening of EST databasesrepresents an attractive approach for de novo SNP identification. Nevertheless, ESTsequencing errors and assembly of EST paralogous sequences can lead to the identification offalse positive SNPs which renders the reliability of EST-derived SNPs relatively low. Furthervalidation of EST-derived SNPs is therefore required. The objective of this work was toassess the quality of and to validate a large number of rainbow trout EST-derived SNPs. RESULTS: A panel of 1,152 EST-derived SNPs was selected from the INRA Sigenae SNP database andwas genotyped in standard and double haploid individuals from several populations using theIllumina GoldenGate BeadXpress assay. High-quality genotyping data were obtained for 958 SNPs representing a genotyping success rate of 83.2 %, out of which, 350 SNPs (36.5 %)were polymorphic in at least one population and were designated as true SNPs. They alsoproved to be a potential tool to investigate genetic diversity of the species, as the set of SNPsuccessfully sorted individuals into three main groups using STRUCTURE software.Functional annotations revealed 28 non-synonymous SNPs, out of which four substitutionswere predicted to affect protein functions. A subset of 223 true SNPs were polymorphic inthe two INRA mapping reference families and were integrated into the INRA microsatellitebasedlinkage map. CONCLUSIONS: Our results represent the first study of EST-derived SNPs validation in rainbow trout, aspecies whose genome sequences is not yet available. We designed several specific filters inorder to improve the genotyping yield. Nevertheless, our selection criteria should be furtherimproved in order to reduce the observed high rate of false positive SNPs which results fromthe occurrence of whole genome duplications.     

Development and initial characterization of a HAPPY panel for mapping the X. tropicalis genome

HAPPY mapping was designed to pursue the analysis of approximately random HAPloid DNA breakage samples using the PolYmerase chain reaction for mapping genomes. In the present study, we improved the method and integrated two other molecular techniques into the process: whole genome amplification and the Sequenom SNP (single nucleotide polymorphism) genotyping assay in order to facilitate whole genome mapping of X. tropicalis. The former technique amplified enough DNA materials to genotype a large number of markers, while the latter allowed for relatively high throughput marker genotyping with multiplex assays on the HAPPY lines. A total of 58 X. tropicalis genes were genotyped on an initial panel of 383 HAPPY lines, which contributed to formation of a working panel of 146 lines. Further genotyping of 29 markers on the working panel led to construction of a HAPPY map for the X. tropicalis genome. We believe that our improved HAPPY method described in the present study has paved the way for the community to map different genomes with a simple, but powerful approach.     

High concordance of bovine single nucleotide polymorphism genotypes generated using two independent genotyping strategies

Single nucleotide polymorphisms (SNPs) represent the most common form of DNA sequence variation in mammalian livestock genomes. While the past decade has witnessed major advances in SNP genotyping technologies, genotyping errors caused, in part, by the biochemistry underlying the genotyping platform used, can occur. These errors can distort project results and conclusions and can result in incorrect decisions in animal management and breeding programs; hence, SNP genotype calls must be accurate and reliable. In this study, 263 Bos spp. samples were genotyped commercially for a total of 16 SNPs. Of the total possible 4,208 SNP genotypes, 4,179 SNP genotypes were generated, yielding a genotype call rate of 99.31% (standard deviation?±?0.93%). Between 110 and 263 samples were subsequently re-genotyped by us for all 16 markers using a custom-designed SNP genotyping platform, and of the possible 3,819 genotypes a total of 3,768 genotypes were generated (98.70% genotype call rate, SD?±?1.89%). A total of 3,744 duplicate genotypes were generated for both genotyping platforms, and comparison of the genotype calls for both methods revealed 3,741 concordant SNP genotype call rates (99.92% SNP genotype concordance rate). These data indicate that both genotyping methods used can provide livestock geneticists with reliable, reproducible SNP genotypic data for in-depth statistical analysis.     

Effectiveness of selective genotyping for detection of quantitative trait loci: an analysis of grain and malt quality traits in three barley populations.

Marker genotype data and grain and malt quality phenotype data from three barley (Hordeum vulgare L.) mapping populations were used to investigate the feasibility of selective genotyping for detection of quantitative trait loci (QTLs). With selective genotyping, only individuals with high and low phenotypic values for the trait of interest are genotyped. Here, genotyping of 10 to 70% of each population (i.e., 5 to 35% in each tail of the phenotypic distribution) was considered. Genomic positions detected by selective genotyping were compared to QTL position estimates from interval mapping analysis using marker genotype data from the entire population. Selective genotyping reliably detected almost all of the mapped QTLs, often with only 10% of the population genotyped. Selective genotyping also detected spurious QTLs in regions of the genome where no significant QTL had been mapped. Even with additional genotyping to verify putative QTLs, the total genotyping effort for detection of QTLs for a single trait by selective genotyping was usually less than 30% of that required for conventional interval mapping. Simultaneous investigation of two or more traits by selective genotyping would require additional genotyping effort, but could still be worthwhile.     

High Concordance of Bovine Single Nucleotide Polymorphism Genotypes Generated Using Two Independent Genotyping Strategies

Single nucleotide polymorphisms (SNPs) represent the most common form of DNA sequence variation in mammalian livestock genomes. While the past decade has witnessed major advances in SNP genotyping technologies, genotyping errors caused, in part, by the biochemistry underlying the genotyping platform used, can occur. These errors can distort project results and conclusions and can result in incorrect decisions in animal management and breeding programs; hence, SNP genotype calls must be accurate and reliable. In this study, 263 Bos spp. samples were genotyped commercially for a total of 16 SNPs. Of the total possible 4,208 SNP genotypes, 4,179 SNP genotypes were generated, yielding a genotype call rate of 99.31% (standard deviation ± 0.93%). Between 110 and 263 samples were subsequently re-genotyped by us for all 16 markers using a custom-designed SNP genotyping platform, and of the possible 3,819 genotypes a total of 3,768 genotypes were generated (98.70% genotype call rate, SD ± 1.89%). A total of 3,744 duplicate genotypes were generated for both genotyping platforms, and comparison of the genotype calls for both methods revealed 3,741 concordant SNP genotype call rates (99.92% SNP genotype concordance rate). These data indicate that both genotyping methods used can provide livestock geneticists with reliable, reproducible SNP genotypic data for in-depth statistical analysis.     

Whole genome SNP scanning of snow sheep (<Emphasis Type="Italic">Ovis nivicola</Emphasis>)

This is the first report performing the whole genome SNP scanning of snow sheep (Ovis nivicola). Samples of snow sheep (n = 18) collected in six different regions of the Republic of Sakha (Yakutia) from 64° to 71° N. For SNP genotyping, we applied Ovine 50K SNP BeadChip (Illumina, United States), designed for domestic sheep. The total number of genotyped SNPs (call rate 90%) was 47796 (88.1% of total SNPs), wherein 1006 SNPs were polymorphic (2.1%). Principal component analysis (PCA) showed the clear differentiation within the species O. nivicola: studied individuals were distributed among five distinct arrays corresponding to the geographical locations of sampling points. Our results demonstrate that the DNA chip designed for domestic sheep can be successfully used to study the allele pool and the genetic structure of snow sheep populations.     

Identification of genome-wide single nucleotide polymorphisms in allopolyploid crop Brassica napus

Background

Single nucleotide polymorphisms (SNPs) are the most common type of genetic variation. Identification of large numbers of SNPs is helpful for genetic diversity analysis, map-based cloning, genome-wide association analyses and marker-assisted breeding. Recently, identifying genome-wide SNPs in allopolyploid Brassica napus (rapeseed, canola) by resequencing many accessions has become feasible, due to the availability of reference genomes of Brassica rapa (2n = AA) and Brassica oleracea (2n = CC), which are the progenitor species of B. napus (2n = AACC). Although many SNPs in B. napus have been released, the objective in the present study was to produce a larger, more informative set of SNPs for large-scale and efficient genotypic screening. Hence, short-read genome sequencing was conducted on ten elite B. napus accessions for SNP discovery. A subset of these SNPs was randomly selected for sequence validation and for genotyping efficiency testing using the Illumina GoldenGate assay.

Results

A total of 892,536 bi-allelic SNPs were discovered throughout the B. napus genome. A total of 36,458 putative amino acid variants were located in 13,552 protein-coding genes, which were predicted to have enriched binding and catalytic activity as a result. Using the GoldenGate genotyping platform, 94 of 96 SNPs sampled could effectively distinguish genotypes of 130 lines from two mapping populations, with an average call rate of 92%.

Conclusions

Despite the polyploid nature of B. napus, nearly 900,000 simple SNPs were identified by whole genome resequencing. These SNPs were predicted to be effective in high-throughput genotyping assays (51% polymorphic SNPs, 92% average call rate using the GoldenGate assay, leading to an estimated >450 000 useful SNPs). Hence, the development of a much larger genotyping array of informative SNPs is feasible. SNPs identified in this study to cause non-synonymous amino acid substitutions can also be utilized to directly identify causal genes in association studies.     

Power of QTL mapping experiments in commercial Atlantic salmon populations, exploiting linkage and linkage disequilibrium and effect of limited recombination in males

Whereas detection and positioning of genes that affect quantitative traits (quantitative trait loci (QTL)) using linkage mapping uses only information from recombinants in the genotyped generations, linkage disequilibrium (LD) mapping uses historical recombinants. Thus, whereas linkage mapping requires large family sizes to detect and accurately position QTL, LD mapping is more dependent on the number of families sampled from the population. In commercial Atlantic salmon breeding programmes, only a small number of individuals per family are routinely phenotyped for traits such as disease resistance and meat colour. In this paper, we assess the power and accuracy of combined linkage disequilibrium linkage analysis (LDLA) to detect QTL in the commercial population using simulation. When 15 half-sib sire families (each sire mated to 30 dams, each dam with 10 progeny) were sampled from the population for genotyping, we were able to detect a QTL explaining 10% of the phenotypic variance in 85% of replicates and position this QTL within 3 cM of the true position in 70% of replicates. When recombination was absent in males, a feature of the salmon genome, power to detect QTL increased; however, the accuracy of positioning the QTL was decreased. By increasing the number of sire families sampled from the population to be genotyped to 30, we were able to increase both the proportion of QTL detected and correctly positioned (even with no recombination in males). QTL with much smaller effect could also be detected. The results suggest that even with the existing recording structure in commercial salmon breeding programmes, there is considerable power to detect and accurately position QTL using LDLA.     

Direct Chloroplast Sequencing: Comparison of Sequencing Platforms and Analysis Tools for Whole Chloroplast Barcoding

Direct sequencing of total plant DNA using next generation sequencing technologies generates a whole chloroplast genome sequence that has the potential to provide a barcode for use in plant and food identification. Advances in DNA sequencing platforms may make this an attractive approach for routine plant identification. The HiSeq (Illumina) and Ion Torrent (Life Technology) sequencing platforms were used to sequence total DNA from rice to identify polymorphisms in the whole chloroplast genome sequence of a wild rice plant relative to cultivated rice (cv. Nipponbare). Consensus chloroplast sequences were produced by mapping sequence reads to the reference rice chloroplast genome or by de novo assembly and mapping of the resulting contigs to the reference sequence. A total of 122 polymorphisms (SNPs and indels) between the wild and cultivated rice chloroplasts were predicted by these different sequencing and analysis methods. Of these, a total of 102 polymorphisms including 90 SNPs were predicted by both platforms. Indels were more variable with different sequencing methods, with almost all discrepancies found in homopolymers. The Ion Torrent platform gave no apparent false SNP but was less reliable for indels. The methods should be suitable for routine barcoding using appropriate combinations of sequencing platform and data analysis.     

SNP genotyping in melons: genetic variation, population structure, and linkage disequilibrium

Novel sequencing technologies were recently used to generate sequences from multiple melon (Cucumis melo L.) genotypes, enabling the in silico identification of large single nucleotide polymorphism (SNP) collections. In order to optimize the use of these markers, SNP validation and large-scale genotyping are necessary. In this paper, we present the first validated design for a genotyping array with 768 SNPs that are evenly distributed throughout the melon genome. This customized Illumina GoldenGate assay was used to genotype a collection of 74 accessions, representing most of the botanical groups of the species. Of the assayed loci, 91 % were successfully genotyped. The array provided a large number of polymorphic SNPs within and across accessions. This set of SNPs detected high levels of variation in accessions from this crop’s center of origin as well as from several other areas of melon diversification. Allele distribution throughout the genome revealed regions that distinguished between the two main groups of cultivated accessions (inodorus and cantalupensis). Population structure analysis showed a subdivision into five subpopulations, reflecting the history of the crop. A considerably low level of LD was detected, which decayed rapidly within a few kilobases. Our results show that the GoldenGate assay can be used successfully for high-throughput SNP genotyping in melon. Since many of the genotyped accessions are currently being used as the parents of breeding populations in various programs, this set of mapped markers could be used for future mapping and breeding efforts.     

Whole‐genome association study for fatty acid composition of oleic acid in Japanese Black cattle

Fatty acid composition, especially oleic acid (C18:1), plays an important role in the eating quality of meat in Japanese Black cattle. Therefore, the objective of this study was to identify loci associated with C18:1 in the intramuscular fat of the trapezius muscles in Japanese Black cattle using the Illumina BovineSNP50 BeadChip whole genome single nucleotide polymorphism (SNP) assay. We also evaluated the relationship between C18:1 and three fatty acid synthesis genes, fatty acid synthase (FASN), stearoyl‐CoA desaturase and sterol regulatory element‐binding protein‐1. In this experiment, we applied a mixed model and Genomic Control approach using selective genotyping to perform a genome‐wide association study. A total of 160 animals (80 animals with higher values and 80 animals with lower values), selected from 3356 animals based on corrected phenotype, were genotyped using the Illumina BovineSNP50 BeadChip and three fatty acid synthesis genes, and the quality of these SNPs was assessed. In this study, a total of 38 955 SNPs, which included SNPs in the three fatty acid synthesis genes, were used, and the estimated inflation factor was 1.06. In the studied population, a total of 32 SNPs, including the FASN gene, had significant effects, and in particular 30 SNPs of all significant SNPs were located between 49 and 55 Mbp on chromosome 19. This study is one of the first genome‐wide association studies for fatty acid composition in a cattle population using the recently released Illumina BovineSNP50 BeadChip.     

Design and Characterization of a 52K SNP Chip for Goats

The success of Genome Wide Association Studies in the discovery of sequence variation linked to complex traits in humans has increased interest in high throughput SNP genotyping assays in livestock species. Primary goals are QTL detection and genomic selection. The purpose here was design of a 50–60,000 SNP chip for goats. The success of a moderate density SNP assay depends on reliable bioinformatic SNP detection procedures, the technological success rate of the SNP design, even spacing of SNPs on the genome and selection of Minor Allele Frequencies (MAF) suitable to use in diverse breeds. Through the federation of three SNP discovery projects consolidated as the International Goat Genome Consortium, we have identified approximately twelve million high quality SNP variants in the goat genome stored in a database together with their biological and technical characteristics. These SNPs were identified within and between six breeds (meat, milk and mixed): Alpine, Boer, Creole, Katjang, Saanen and Savanna, comprising a total of 97 animals. Whole genome and Reduced Representation Library sequences were aligned on >10 kb scaffolds of the de novo goat genome assembly. The 60,000 selected SNPs, evenly spaced on the goat genome, were submitted for oligo manufacturing (Illumina, Inc) and published in dbSNP along with flanking sequences and map position on goat assemblies (i.e. scaffolds and pseudo-chromosomes), sheep genome V2 and cattle UMD3.1 assembly. Ten breeds were then used to validate the SNP content and 52,295 loci could be successfully genotyped and used to generate a final cluster file. The combined strategy of using mainly whole genome Next Generation Sequencing and mapping on a contig genome assembly, complemented with Illumina design tools proved to be efficient in producing this GoatSNP50 chip. Advances in use of molecular markers are expected to accelerate goat genomic studies in coming years.     

Highly efficient genotyping of rice biparental populations by GoldenGate assays based on parental resequencing

Key message

A new time- and cost-effective strategy was developed for medium-density SNP genotyping of rice biparental populations, using GoldenGate assays based on parental resequencing.

Abstract

Since the advent of molecular markers, crop researchers and breeders have dedicated huge amounts of effort to detecting quantitative trait loci (QTL) in biparental populations for genetic analysis and marker-assisted selection (MAS). In this study, we developed a new time- and cost-effective strategy for genotyping a population of progeny from a rice cross using medium-density single nucleotide polymorphisms (SNPs). Using this strategy, 728,362 “high quality” SNPs were identified by resequencing Teqing and Lemont, the parents of the population. We selected 384 informative SNPs that were evenly distributed across the genome for genotyping the biparental population using the Illumina GoldenGate assay. 335 (87.2 %) validated SNPs were used for further genetic analyses. After removing segregation distortion markers, 321 SNPs were used for linkage map construction and QTL mapping. This strategy generated SNP markers distributed more evenly across the genome than previous SSR assays. Taking the GW5 gene that controls grain shape as an example, our strategy provided higher accuracy (0.8 Mb) and significance (LOD 5.5 and 10.1) in QTL mapping than SSR analysis. Our study thus provides a rapid and efficient strategy for genetic studies and QTL mapping using SNP genotyping assays.     

Quantitative evaluation by minisequencing and microarrays reveals accurate multiplexed SNP genotyping of whole genome amplified DNA

Whole genome amplification (WGA) procedures such as primer extension preamplification (PEP) or multiple displacement amplification (MDA) have the potential to provide an unlimited source of DNA for large-scale genetic studies. We have performed a quantitative evaluation of PEP and MDA for genotyping single nucleotide polymorphisms (SNPs) using multiplex, four-color fluorescent minisequencing in a microarray format. Forty-five SNPs were genotyped and the WGA methods were evaluated with respect to genotyping success, signal-to-noise ratios, power of genotype discrimination, yield and imbalanced amplification of alleles in the MDA product. Both PEP and MDA products provided genotyping results with a high concordance to genomic DNA. For PEP products the power of genotype discrimination was lower than for MDA due to a 2-fold lower signal-to-noise ratio. MDA products were indistinguishable from genomic DNA in all aspects studied. To obtain faithful representation of the SNP alleles at least 0.3 ng DNA should be used per MDA reaction. We conclude that the use of WGA, and MDA in particular, is a highly promising procedure for producing DNA in sufficient amounts even for genome wide SNP mapping studies.     

A pipeline for high throughput detection and mapping of SNPs from EST databases

Single nucleotide polymorphisms (SNPs) represent the most abundant type of genetic variation that can be used as molecular markers. The SNPs that are hidden in sequence databases can be unlocked using bioinformatic tools. For efficient application of these SNPs, the sequence set should be error-free as much as possible, targeting single loci and suitable for the SNP scoring platform of choice. We have developed a pipeline to effectively mine SNPs from public EST databases with or without quality information using QualitySNP software, select reliable SNP and prepare the loci for analysis on the Illumina GoldenGate genotyping platform. The applicability of the pipeline was demonstrated using publicly available potato EST data, genotyping individuals from two diploid mapping populations and subsequently mapping the SNP markers (putative genes) in both populations. Over 7000 reliable SNPs were identified that met the criteria for genotyping on the GoldenGate platform. Of the 384 SNPs on the SNP array approximately 12% dropped out. For the two potato mapping populations 165 and 185 SNPs segregating SNP loci could be mapped on the respective genetic maps, illustrating the effectiveness of our pipeline for SNP selection and validation.