Behavior and target site selection of conjugative transposon Tn916 in two different strains of toxigenic Clostridium difficile

The insertion sites of the conjugative transposon Tn916 in the anaerobic pathogen Clostridium difficile were determined using Illumina Solexa high-throughput DNA sequencing of Tn916 insertion libraries in two different clinical isolates: 630ΔE, an erythromycin-sensitive derivative of 630 (ribotype 012), and the ribotype 027 isolate R20291, which was responsible for a severe outbreak of C. difficile disease. A consensus 15-bp Tn916 insertion sequence was identified which was similar in both strains, although an extended consensus sequence was observed in R20291. A search of the C. difficile 630 genome showed that the Tn916 insertion motif was present 100,987 times, with approximately 63,000 of these motifs located in genes and 35,000 in intergenic regions. To test the usefulness of Tn916 as a mutagen, a functional screen allowed the isolation of a mutant. This mutant contained Tn916 inserted into a gene involved in flagellar biosynthesis.     

Transfer of a conjugative transposon, Tn5397 in a model oral biofilm

A tetracycline resistance profile was established from a microcosm dental plaque in a constant depth film fermenter. The fermenter was inoculated with a Bacillus subtilis strain which contained the conjugative transposon, Tn5397, which confers tetracycline resistance upon its host. After 6 hour and 24 hour the tetracycline resistance profile of the biofilm was redetermined and a tetracycline resistant Streptococcus species was isolated. A molecular analysis of this strain confirmed that Tn5397 was present in the genomic DNA of the isolate. These data represent the first report, to our knowledge, of intergeneric transfer of a conjugative transposon in a mixed species biofilm and demonstrates the ability of conjugative transposons to disseminate antibiotic resistance genes in a mixed species environment.     

Characterization of the ends and target sites of the novel conjugative transposon Tn5397 from Clostridium difficile: excision and circularization is mediated by the large resolvase, TndX

Tn5397 is a conjugative transposon that was originally isolated from Clostridium difficile. Previous analysis had shown that the central region of Tn5397 was closely related to the conjugative transposon Tn916. However, in this work we obtained the DNA sequence of the ends of Tn5397 and showed that they are completely different to those of Tn916. Tn5397 did not contain the int and xis genes, which are required for the excision and integration of Tn916. Instead, the right end of Tn5397 contained a gene, tndX, that appears to encode a member of the large resolvase family of site-specific recombinases. TndX is closely related to the TnpX resolvase from the mobilizable but nonconjugative chloramphenicol resistance transposons, Tn4451 from Clostridium perfringens and Tn4453 from C. difficile. Like the latter elements, inserted copies of Tn5397 were flanked by a direct repeat of a GA dinucleotide. The Tn5397 target sites were also shown to contain a central GA dinucleotide. Excision of the element in C. difficile completely regenerated the original target sequence. A circular form of the transposon, in which the left and right ends of the element were separated by a GA dinucleotide, was detected by PCR in both Bacillus subtilis and C. difficile. A Tn5397 mutant in which part of tndX was deleted was constructed in B. subtilis. This mutant was nonconjugative and did not produce the circular form of Tn5397, indicating that the TndX resolvase has an essential role in the excision and transposition of Tn5397 and is thus the first example of a member of the large resolvase family of recombinases being involved in conjugative transposon mobility. Finally, we showed that introduction of Tn916 into a strain containing Tn5397 induced the loss of the latter element in 95.6% of recipients.     

The large resolvase TndX is required and sufficient for integration and excision of derivatives of the novel conjugative transposon Tn5397

Tn5397 is a novel conjugative transposon, originally isolated from Clostridium difficile. This element can transfer between C. difficile strains and to and from Bacillus subtilis. It encodes a conjugation system that is very similar to that of Tn916. However, insertion and excision of Tn5397 appears to be dependent on the product of the element encoded gene tndX, a member of the large resolvase family of site-specific recombinases. To test the role of tndX, the gene was cloned and the protein was expressed in Escherichia coli. The ability of TndX to catalyze the insertion and excision of derivatives (minitransposons) of Tn5397 representing the putative circular and integrated forms, respectively, was investigated. TndX was required for both insertion and excision. Mutagenesis studies showed that some of the highly conserved amino acids at the N-terminal resolvase domain and the C-terminal nonconserved region of TndX are essential for activity. Analysis of the target site choices showed that the cloned Tn5397 targets from C. difficile and B. subtilis were still hot spots for the minitransposon insertion in E. coli.     

Casposon integration shows strong target site preference and recapitulates protospacer integration by CRISPR-Cas systems

Casposons are a recently discovered group of large DNA transposons present in diverse bacterial and archaeal genomes. For integration into the host chromosome, casposons employ an endonuclease that is homologous to the Cas1 protein involved in protospacer integration by the CRISPR-Cas adaptive immune system. Here we describe the site-preference of integration by the Cas1 integrase (casposase) encoded by the casposon of the archaeon Aciduliprofundum boonei. Oligonucleotide duplexes derived from the terminal inverted repeats (TIR) of the A. boonei casposon as well as mini-casposons flanked by the TIR inserted preferentially at a site reconstituting the original A. boonei target site. As in the A. boonei genome, the insertion was accompanied by a 15-bp direct target site duplication (TSD). The minimal functional target consisted of the 15-bp TSD segment and the adjacent 18-bp sequence which comprises the 3′ end of the tRNA-Pro gene corresponding to the TΨC loop. The functional casposase target site bears clear resemblance to the leader sequence-repeat junction which is the target for protospacer integration catalyzed by the Cas1–Cas2 adaptation module of CRISPR-Cas. These findings reinforce the mechanistic similarities and evolutionary connection between the casposons and the adaptation module of the prokaryotic adaptive immunity systems.     

A group II intron in a conjugative transposon from the gram-positive bacterium,Clostridium difficile

We have been studying the conjugative transposon Tn5397, originally isolated from the Gram-positive pathogen Clostridium difficile. Physical analysis of this transposon demonstrated that it contained a group II intron. This is the first report of an intron in a conjugative transposon and the first report of a group II intron in Gram-positive bacteria. The intron interrupted a gene in Tn5397 that is almost identical to orf14 from Tn916. DNA hybridisation analysis showed that elements related to Tn5397, containing the group II intron, were present in five other C. difficile strains from different geographical locations suggesting that the element is likely to be widely distributed.     

Characterization of Pseudomonas mercury-resistance transposon Tn502, which has a preferred insertion site in RP1

Tn502mer differs in size and restriction map from the well-characterized Tn501mer. It also differs in its preferential and high-frequency insertion into the 6 kb PstI-C region of RP1. The affinity for this region is perpetuated in pVS76, a clone of RP1 PstI-C in pBR322. Restriction mapping of independent pVS76::Tn502 derivatives revealed that Tn502 inserted at the same site (or small region) in PstI-C corresponding to the 35 kb coordinate in RP1. Insertion occurred in both orientations, but one was preferred. When PstI-C was deleted from RP1, acquisition of Tn502 was reduced and the sites of insertion randomized.     

Analysis of a Clostridium difficile PCR ribotype 078 100 kilobase island reveals the presence of a novel transposon, Tn6164

ABSTRACT: BACKGROUND: Clostridium difficile is the main cause of antibiotic associated diarrhea. In the past decade, the number of C. difficile patients has increased dramatically, coinciding with the emergence of two PCR ribotypes, 027 and 078. PCR ribotype 078 is also frequently found during C. difficile outbreaks in pigfarms. Previously, the genome of the PCR ribotype 078 strain M120, a human isolate, was described to contain a unique insert of 100 kilobases. RESULTS: Analysis of this insert revealed over 90 open reading frames, encoding proteins originating from transposons, phages and plasmids. The insert was shown to be a transposon (Tn6164), as evidenced by the presence of an excised and circularised molecule, containing the ligated 5'and 3'ends of the insert. Transfer of the element could not be shown through filter-mating experiments. Whole genome sequencing of PCR ribotype 078 strain 31618, isolated from a diarrheic piglet, showed that Tn6164 was not present in this strain. To test the prevalence of Tn6164, a collection of 231 Clostridium difficile PCR ribotype 078 isolates from human (n = 173) and porcine (n = 58) origin was tested for the presence of this element by PCR. The transposon was present in 9 human, tetracycline resistant isolates, originating from various countries in Europe, and none of the pig strains. Nine other strains, also tetracycline resistant human isolates, contained half of the transposon, suggesting multiple insertion steps yielding the full Tn6164. Other PCR ribotypes (n = 66) were all negative for the presence of the transposon. Multi locus variable tandem repeat analysis revealed genetic relatedness among transposon containing isolates. Although the element contained several potential antibiotic resistance genes, it did not yield a readily distinguishable phenotype. CONCLUSIONS: Tn6164 is a newly described transposon, occurring sporadically in C. difficile PCR ribotype 078 strains. Although no transfer of the element could be shown, we hypothesize that the element could serve as a reservoir of antibiotic resistance genes for other bacteria. Further research is needed to investigate the transfer capabilities of the element and to substantiate the possible role of Tn6164 as a source of antibiotic resistance genes for other gut pathogens.     

The transposon Tn9 generates a 9 bp repeated sequence during integration.

We performed a genetic and sequencing analysis of insertions of the transposon Tn9 into the lac operon of E. coli. Genetic mapping of 70 insertions into lacl and Z shows that starting from the same point on the chromosome, Tn9 goes to at least 50 different points in these two genes. Although there are preferred regions for insertion, these consist of multiple integration points within a small area, as demonstrated by pairwise crosses and restriction mapping. Sequence analysis of three Tn9 insertions reveals that Tn9 integration is associated with a direct repeat of 9 base pairs (bp) of host sequence. We show that these extra 9 nucleotide pairs are generated upon insertion and not brought in with the element.     

Transfer of Tn916 and Tn916ΔE into Clostridium difficile: demonstration of a hot-spot for these elements in the C. difficile genome

The conjugative transposon Tn916 and a derivative Tn916 delta E was transferred from Bacillus subtilis into Clostridium difficile CD37 by filter mating. All the C. difficile transconjugants appeared to contain one copy of the transposon integrated into the same position in the genome. Transposition from the original site of integration was not observed. Like Tn916 the transferable tetracycline resistance determinant (Tc-CD) of C. difficile has a preferred site of integration in C. difficile and is homologous with Tn916 along the whole length of Tn916. However comparisons of the distribution of TaqI and Sau3AI sites in the homologous regions of the two elements did not demonstrate any hybridizing fragments in common.     

Characterization of the ends and target site of a novel tetracycline resistance-encoding conjugative transposon from Enterococcus faecium 664.1H1

Enterococcus faecium 664.1H1 is multiply antibiotic resistant and mercury resistant. In this study, the genetic support for the tetracycline resistance of E. faecium 664.1H1 was characterized. The tet(S) gene is responsible for tetracycline resistance, and this gene is located on the chromosome of E. faecium 664.1H1, on a novel conjugative transposon. The element is transferable to Enterococcus faecalis, where it integrates into a specific site. The element was designated EfcTn1. The integrase of EfcTn1 is related to the integrase proteins found on staphylococcal pathogenicity islands. We show that the transposon is flanked by an 18-bp direct repeat, a copy of which is also present at the target site and at the joint of a circular form, and we propose a mechanism of insertion and excision.     

The structure of the excisionase (Xis) protein from conjugative transposon Tn916 provides insights into the regulation of heterobivalent tyrosine recombinases

Heterobivalent tyrosine recombinases play a prominent role in numerous bacteriophage and transposon recombination systems. Their enzymatic activities are frequently regulated at a structural level by excisionase factors, which alter the ability of the recombinase to assemble into higher-order recombinogenic nucleoprotein structures. The Tn916 conjugative transposon spreads antibiotic resistance in pathogenic bacteria and is mobilized by a heterobivalent recombinase (Tn916Int), whose activity is regulated by an excisionase factor (Tn916Xis). Unlike the well-characterized (lambda)Xis excisionase from bacteriophage lambda, Tn916Xis stimulates excision in vitro and in Escherichia coli only modestly. To gain insights into this functional difference, we have performed in vitro DNA-binding studies of Tn916Xis and Tn916Int, and we have solved the solution structure of Tn916Xis. We show that the heterobivalent Tn916Int protein is capable of bridging the DR2-type and core-type sites on the left arm of the tranpsoson. Consistent with the notion that Tn916Int is regulated only loosely, we find that Tn916Xis binding does not alter the stability of DR2-Tn916Int-core bridges or the ability of Tn916Int to recognize the arms of the transposon in vitro. Despite a high degree of divergence at the primary sequence level, we show that Tn916Xis and (lambda)Xis adopt related prokaryotic winged-helix structures. However, they differ at their C termini, with Tn916Xis replacing the flexible integrase contacting tail found in (lambda)Xis with a positively charged alpha-helix. This difference provides a structural explanation for why Tn916Xis does not interact cooperatively with its cognate integrase in vitro, and reveals how subtle changes in the winged-helix fold can modulate the functional properties of excisionase factors.     

Multiple integration sites for the lactose transposon Tn951 on plasmid RP1 and establishment of a coordinate system for Tn951

Summary Various molecules generated by transposition of the lactose transposon Tn951 from plasmid pGC1 to plasmid RP1 were examined by DNA heteroduplex and restriction endonuclease analysis. Tn951 was found to transpose to at least eight different sites on RP1 in both possible orientations. A coordinate system for the lactose transposon Tn951 is constructed.     

Site-specific integration of foreign DNA into minimal bacterial and human target sequences mediated by a conjugative relaxase

Background

Bacterial conjugation is a mechanism for horizontal DNA transfer between bacteria which requires cell to cell contact, usually mediated by self-transmissible plasmids. A protein known as relaxase is responsible for the processing of DNA during bacterial conjugation. TrwC, the relaxase of conjugative plasmid R388, is also able to catalyze site-specific integration of the transferred DNA into a copy of its target, the origin of transfer (oriT), present in a recipient plasmid. This reaction confers TrwC a high biotechnological potential as a tool for genomic engineering.

Methodology/Principal Findings

We have characterized this reaction by conjugal mobilization of a suicide plasmid to a recipient cell with an oriT-containing plasmid, selecting for the cointegrates. Proteins TrwA and IHF enhanced integration frequency. TrwC could also catalyze integration when it is expressed from the recipient cell. Both Y18 and Y26 catalytic tyrosil residues were essential to perform the reaction, while TrwC DNA helicase activity was dispensable. The target DNA could be reduced to 17 bp encompassing TrwC nicking and binding sites. Two human genomic sequences resembling the 17 bp segment were accepted as targets for TrwC-mediated site-specific integration. TrwC could also integrate the incoming DNA molecule into an oriT copy present in the recipient chromosome.

Conclusions/Significance

The results support a model for TrwC-mediated site-specific integration. This reaction may allow R388 to integrate into the genome of non-permissive hosts upon conjugative transfer. Also, the ability to act on target sequences present in the human genome underscores the biotechnological potential of conjugative relaxase TrwC as a site-specific integrase for genomic modification of human cells.     

Low target site specificity of an IS6100-based mini-transposon, Tn1792, developed for transposon mutagenesis of antibiotic-producing Streptomyces

To improve transposon mutagenesis of antibiotic-producing Streptomyces, a mini-transposon, Tn1792, was constructed, based on IS6100, originally isolated from Mycobacterium fortuitum. Easily manageable transposition assays were developed to demonstrate inducible transposition of Tn1792 into the Streptomyces genome from a temperature-sensitive delivery plasmid. Introduction of the selectable aac1 gene between the inverted repeats in Tn1792 allowed for both reliable identification of transposition events in Streptomyces, and also subsequent cloning of transposon-tagged sequences in Escherichia coli. This enabled the target site specificity of Tn1792 to be determined at nucleotide resolution, revealing no significant shared homology between different target sites. Consequently, Tn1792 is well suited for random mutagenesis of Streptomyces.     

The presence of conjugative transposon Tn916 in the recipient strain does not impede transfer of a second copy of the element.

Transfer of the conjugative transposon Tn916 from the chromosome of Bacillus subtilis to a transposon-free Streptococcus pyogenes strain occurs at the same frequency as transfer to a Tn916-containing recipient. This rules out a model for conjugal transfer of Tn916 in which a copy of the element in the recipient represses transposition of a copy introduced by conjugation. Homology-directed integration of the incoming transposon into the resident one is less frequent than insertion elsewhere in the chromosome. This shows that after conjugation, transposition occurs more frequently than homologous recombination. However, because transconjugants arising from homologous recombination can be selected, it is possible to use Tn916 as a shuttle for gram-positive organisms for which there is no easy means of introducing DNA.     

The interleukin-6 gene locus seems to be a preferred target site for retrotransposon integration

Recently, we have observed the insertion of a retrotransposon into the interleukin-6 (II-6) locus of a mouse somatic cell line. Here we report the characterization of Il-6 genomic regions from both mouse and rat. Restriction site analysis, DNA sequence analysis, and computer-assisted search revealed eight retrotransposon-like elements distributed over a 25 kilobase (kB) mouse Il-6 region. In the rat, five different retrotransposons have been identified within a 17 kb Il-6 region. The retrotransposons belong to the LINE-, Alu I or Alu II families, or to a rat specific class of retrotransposons. Some of the retrotransposons class of retrotransposons. Some of the retrotransposons exhibit characteristic features such as target site duplication and a poly A-tract. Remarkably, several retrotransposons map to different chromosomal locations in the mouse and rat. A genealogical tree of mouse, rat, and human Il-6 loci demonstrates a series of retrotranspositions that recently occurred in evolution. These results suggest that the Il-6 locus serves as a preferred target site for retrotransposon integration during evolution.The nucleotide sequence data reported in this paper have been submitted to the GenBank nucleotide sequence database and have been assigned the accession numbers M36993-4 (L.1.R3), M36995 (L1.R2), and M36996 (L1.M1/L1.M2).This work contains part of the doctoral thesis of Z. Qin and I. Schuller.     

The transposon Tn1 as a probe for studying ColE1 structure and function.

Summary Insertion of the transposable genetic element Tn1 into different sites of plasmid ColE1 results in a number of mutant phenotypes. Whereas all plasmids examined were present in normal amount, all showed reduced immunity to killing by colicin E1. Of six insertions isolated after conjugation, five fail to produce colicin, are conjugally proficient (transmissible), and map within a 500 nucleotide region of the genome. The other is conjugally deficient, produces colicin normally and maps close to two others with a similar phenotype isolated after transformation. Of four others isolated after transformation, two have similar properties to the original five transmissible plasmids. The other two are nontransmissible and produce colicin. Non-transmissibility is correlated with reduced relaxation complex. Patterns of protein synthesis in minicels by ColE1 and ColE1:: Tn1 plasmids have been examined: all ColE1 plasmids containing Tn1 show an altered pattern of ColE1 protein synthesis in addition to three presumptive Tn1-specified proteins, one of which is shown to be -lactamase. ColE1:: Tn1 plasmids can be inserted into the conjugative plasmid R64drd11 to form a cointegrate in which ColE1 and Tn1 function can be expressed.     

Factors responsible for target site selection in Tn10 transposition: a role for the DDE motif in target DNA capture.

Tn10, like several other transposons, exhibits a marked preference for integration into particular target sequences. Such sequences are referred to as integration hotspots and have been used to define a consensus target site in Tn10 transposition. We demonstrate that a Tn10 hotspot called HisG1, which was identified originally in vivo, also functions as an integration hotspot in vitro in a reaction where the HisG1 sequence is present on a short DNA oligomer. We use this in vitro system to define factors which are important for the capture of the HisG1 target site. We demonstrate that although divalent metal ions are not essential for HisG1 target capture, they greatly facilitate capture of a mutated HisG1 site. Analysis of catalytic transposase mutants further demonstrates that the DDE motif plays a critical role in ''divalent metal ion-dependent'' target capture. Analysis of two other classes of transposase mutants, Exc+ Int- (which carry out transposon excision but not integration) and ATS (altered target specificity), demonstrates that while a particular ATS transposase binds HisG1 mutants better than wild-type transposase, Exc+ Int- mutants are defective in HisG1 capture, further defining the properties of these classes of mutants. Possible mechanisms for the above observations are considered.