Inhibition of sliding movement of F-actin by crosslinking emphasizes the role of actin structure in the mechanism of motility

The effects of crosslinking of monomeric and polymeric actin with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC), disuccinimidyl suberate (DSS) and glutaraldehyde on the interaction with heavy meromyosin (HMM) in solution and on the sliding movement on glass-attached HMM were examined. The Vmax values of actin-activated HMM ATPase decreased in the following order: intact actin = EDC F-actin greater than DSS actin greater than glutaraldehyde F-actin = glutaraldehyde G-actin greater than EDC G-actin. The affinity of actin for HMM in the presence of ATP decreased in the following order: DSS actin greater than glutaraldehyde F-actin = glutaraldehyde G-actin greater than intact actin greater than EDC F-actin greater than EDC G-actin. However, sliding movement was inhibited only in the case of glutaraldehyde-crosslinked F and G-actin and EDC-crosslinked G-actin. Interestingly, after copolymerization of "non-motile" glutaraldehyde or EDC-crosslinked monomers with "motile" monomers of intact actin sliding of the copolymers was observed and its rate was independent of the type of crosslinked monomer, i.e. of the manner of their interaction with HMM. These data strongly indicate that inhibition of the sliding of actin by crosslinking cannot be explained entirely by changes in the Vmax value or affinity for myosin heads. We conclude that movement is generated by interaction of myosin with segments of F-actin containing a number of intact monomers, and the mechanism of inhibition involves an effect of the crosslinkers on the structure of F-actin itself.     

A physical model of ATP-induced actin-myosin movement in vitro.

The nature of the mechanism limiting the velocity of ATP-induced unidirectional movements of actin-myosin filaments in vitro is considered. In the sliding process two types of "cyclic" interactions between myosin heads and actin are involved, i.e., productive and nonproductive. In the productive interaction, myosin heads split ATP and generate a force which produces sliding between actin and myosin. In the nonproductive interaction "cycle," on the other hand, myosin heads rapidly attach to and detach from actin "reversibly," i.e., without splitting ATP or generating an active force. Such a nonproductive interaction "cycle" causes irreversible dissipation of sliding energy into heat, because the myosin cross-bridges during this interaction are passive elastic structures. This consideration has led us to postulate that such cross-bridges, in effect, exert viscous-like frictional drag on moving elements. Energetic considerations suggest that this frictional drag is much greater than the hydrodynamic viscous drag. We present a model in which the sliding velocity is limited by the balance between the force generated by myosin cross-bridges in the productive interaction and the frictional drag exerted by other myosin cross-bridges in the nonproductive interaction. The model is consistent with experimental findings of in vitro sliding, including the dependence of velocity on ATP concentration, as well as the sliding velocity of co-polymers of skeletal muscle myosin and phosphorylated and unphosphorylated smooth muscle myosins.     

Some motile properties of fast characean myosin

We improved a motility assay system by using an affinity-purified antibody against the C-terminal globular domain of characean myosin. This improvement allowed us to study the sensitivity to ionic strength or the processivity of characean myosin. The sliding velocity of actin filaments on a characean myosin-coated surface was unaffected by ionic strength. This property is unlike that of skeletal or smooth muscle myosin and suggests that the binding manner of characean myosin to actin is different from that in other muscle myosins. The sliding velocity decreased when the MgADP concentration was raised. The extent of inhibition by MgADP on the motile activity of characean myosin was almost the same as in skeletal muscle or cardiac myosin. The number of sliding filaments on the characean myosin-coated surface decreased drastically with a decrease in the motor density. The motor density required to produce a successful movement of actin filament was about 200 molecules/microm(2). These results suggest that the characean myosin is not a processive motor protein.     

Molecular Mechanical Differences between Isoforms of Contractile Actin in the Presence of Isoforms of Smooth Muscle Tropomyosin

The proteins involved in smooth muscle''s molecular contractile mechanism – the anti-parallel motion of actin and myosin filaments driven by myosin heads interacting with actin – are found as different isoforms. While their expression levels are altered in disease states, their relevance to the mechanical interaction of myosin with actin is not sufficiently understood. Here, we analyzed in vitro actin filament propulsion by smooth muscle myosin for -actin (A), -actin-tropomyosin- (A-Tm), -actin-tropomyosin- (A-Tm), -actin (A), -actin-tropomyosin- (A-Tm), and -actin-tropomoysin- (A-Tm). Actin sliding analysis with our specifically developed video analysis software followed by statistical assessment (Bootstrapped Principal Component Analysis) indicated that the in vitro motility of A, A, and A-Tm is not distinguishable. Compared to these three ‘baseline conditions’, statistically significant differences () were: A-Tm – actin sliding velocity increased 1.12-fold, A-Tm – motile fraction decreased to 0.96-fold, stop time elevated 1.6-fold, A-Tm – run time elevated 1.7-fold. We constructed a mathematical model, simulated actin sliding data, and adjusted the kinetic parameters so as to mimic the experimentally observed differences: A-Tm – myosin binding to actin, the main, and the secondary myosin power stroke are accelerated, A-Tm – mechanical coupling between myosins is stronger, A-Tm – the secondary power stroke is decelerated and mechanical coupling between myosins is weaker. In summary, our results explain the different regulatory effects that specific combinations of actin and smooth muscle tropomyosin have on smooth muscle actin-myosin interaction kinetics.     

Cooperativity of thiol-modified myosin filaments. ATPase and motility assays of myosin function.

The effects of chemical modifications of myosin's reactive cysteines on actomyosin adenosine triphosphatase (ATPase) activities and sliding velocities in the in vitro motility assays were examined in this work. The three types of modifications studied were 4-[N-[(iodoacetoxy)ethyl]-N-methylamino]-7-nitrobenz-2-oxa-1,3- diazole labeling of SH2 (based on Ajtai and Burghart. 1989. Biochemistry. 28:2204-2210.), phenylmaleimide labeling of SH1, and phenylmaleimide labeling of myosin in myofibrils under rigor conditions. Each type of modified myosin inhibited the sliding of actin in motility assays. The sliding velocities of actin over copolymers of modified and unmodified myosins in the motility assay were slowest with rigor-modified myosin and most rapid with SH2-labeled myosin. The actin-activated ATPase activities of similarly copolymerized myosins were lowest with SH2-labeled myosin and highest with rigor-modified myosin. The actin-activated ATPase activities of myosin subfragment-1 obtained from these modified myosins decreased in the same linear manner with the fraction of modified heads. These results are interpreted using a model in which the sliding of actin filaments over myosin filaments decreases the probability of myosin activation by actin. The sliding velocity of actin over monomeric rigor-modified myosin exceeded that over the filamentous form, which suggests for this myosin that filament structure is important for the inhibition of actin sliding in motility assays. The fact that all cysteine modifications examined inhibited the actomyosin ATPase activities and sliding velocities of actin over myosin poses questions concerning the information about the activated crossbridge obtained from probes attached to SH1 or SH2 on myosin.     

Direct observation of molecular motility by light microscopy

We used video-fluorescence microscopy to directly observe the sliding movement of single fluorescently labeled actin filaments along myosin fixed on a glass surface. Single actin filaments labeled with phalloidin-tetramethyl-rhodamine, which stabilizes the filament structure of actin, could be seen very clearly and continuously for at least 60 min in 02-free solution, and the sensitivity was high enough to see very short actin filaments less than 40 nm long that contained less than eight dye molecules. The actin filaments were observed to move along double-headed and, similarly, single-headed myosin filaments on which the density of the heads varied widely in the presence of ATP, showing that the cooperative interaction between the two heads of the myosin molecule is not essential to produce the sliding movement. The velocity of actin filament independent of filament length (greater than 1 micron) was almost unchanged until the density of myosin heads along the thick filament was decreased from six heads/14.3 nm to 1 head/34 nm. This result suggests that five to ten heads are sufficient to support the maximum sliding velocity of actin filaments (5 micron/s) under unloaded conditions. In order for five to ten myosin heads to achieve the observed maximum velocity, the sliding distance of actin filaments during one ATP cycle must be more than 60 nm.     

X-ray structures of the apo and MgATP-bound states of Dictyostelium discoideum myosin motor domain

Myosin is the most comprehensively studied molecular motor that converts energy from the hydrolysis of MgATP into directed movement. Its motile cycle consists of a sequential series of interactions between myosin, actin, MgATP, and the products of hydrolysis, where the affinity of myosin for actin is modulated by the nature of the nucleotide bound in the active site. The first step in the contractile cycle occurs when ATP binds to actomyosin and releases myosin from the complex. We report here the structure of the motor domain of Dictyostelium discoideum myosin II both in its nucleotide-free state and complexed with MgATP. The structure with MgATP was obtained by soaking the crystals in substrate. These structures reveal that both the apo form and the MgATP complex are very similar to those previously seen with MgATPgammaS and MgAMP-PNP. Moreover, these structures are similar to that of chicken skeletal myosin subfragment-1. The crystallized protein is enzymatically active in solution, indicating that the conformation of myosin observed in chicken skeletal myosin subfragment-1 is unable to hydrolyze ATP and most likely represents the pre-hydrolysis structure for the myosin head that occurs after release from actin.     

The binding of myosin heads on heavy meromyosin and assembled myosin to actin in the presence of nucleotides. Measurements by the proteolytic rates method

The initial rates of tryptic digestion at the 50/20-kDa junction in myosin and myosin subfragment 1 were determined for the free proteins and their complexes with actin in the presence and absence of MgATP. The proteolytic reactions were carried out at 24 degrees C and under ionic strength conditions (mu) adjusted to 35, 60, and 130 mM. The percentages of myosin heads and myosin subfragment 1 bound to actin in the presence of MgATP were calculated from the rates of proteolysis for each set of digestion experiments. In all cases, the myosin heads in the synthetic filaments showed greater binding to actin than myosin subfragment 1. This binding difference was most prominent (3-fold) at mu = 130 mM. The binding of heavy meromyosin (HMM) to actin in the presence of MgADP was measured at 4 degrees C by ultracentrifugation and the proteolytic rates methods. Ultracentrifugation experiments determined the fraction of HMM molecules bound to actin in the presence of MgADP, whereas the proteolytic measurements yielded the information on the fraction of HMM heads bound to actin. Taken together, these measurements show that a significant fraction of HMM is bound to actin with only one head in the presence of MgADP under ionic conditions of 180 and 280 mM.     

Modulation of cross-bridge affinity for MgGTP by Ca2+ in skinned fibers of rabbit psoas muscle.

Previously we reported that saturation of cross-bridges with MgATP gamma S in skinned muscle fibers was calcium sensitive. In the present study we investigate whether this observation can be generalized to other nucleotides by studying saturation of cross-bridges with MgGTP. In solution, myosin-subfragment 1 (S1) in the presence of 10 mM MgGTP was found to bind to actin with low affinity, similar to that in the presence of MgATP and MgATP gamma S. In EGTA buffer, the equatorial x-ray diffraction intensity ratio I11/I10 recorded in single skinned fibers decreased upon increasing MgGTP concentration from 0 to 10 mM (1 degree C and 170 mM ionic strength). The I11/I10 ratio leveled off at 10 mM MgGTP, indicating full saturation of cross-bridges with the nucleotide. Under these conditions, the value of I11/I10 is indistinguishable from that obtained in the presence of saturating [MgATP]. In CaEGTA buffer, however, the decrease in I11/I10 occurs over a wider range of concentrations, and there is no indication of I11/I10 leveling off at 10 mM MgGTP, suggesting that full saturation is not reached. The Ca2+ dependence of GTP binding appears to be a direct consequence of the differences in the affinities of the strongly bound cross-bridges to actin versus weakly bound cross-bridges to actin. A biochemical scheme that could qualitatively explain the titration behavior of ATP gamma S and GTP is presented.     

Effects of MgATP, MgADP, and Pi on actin movement by smooth muscle myosin.

To test the idea that the in vitro motility assay is a simplified model system for muscle contraction, the MgATP-dependent movement of actin filaments by thiophosphorylated smooth muscle myosin was characterized in the presence of the products MgADP and inorganic phosphate. The dependence of actin filament velocity on MgATP concentration was hyperbolic with a maximum velocity of 0.6 micron/s and an apparent Km = 40 microM (30 degrees C). MgADP competitively inhibited actin movement by MgATP with a Ki = 0.25 mM. Inorganic phosphate did not affect actin filament velocity in the presence of 1 mM MgATP, but competitively inhibited movement in the presence of 50 microM MgATP with a Ki = 9.5 mM. The effects of ADP and Pi on velocity agree with fiber mechanical studies, confirming that the motility assay is an excellent system to investigate the molecular mechanisms of force generation and shortening in smooth muscle. The rate at which rigor cross-bridges can be recruited to move actin filaments was observed by initiating cross-bridge cycling from rigor by flash photolysis of caged MgATP. Following the flash, which results in a rapid increase in MgATP concentration, actin filaments experienced a MgATP-dependent delay prior to achieving steady state velocity. The delay at low MgATP concentrations was interpreted as evidence that motion generating cross-bridges are slowed by a load due to a transiently high percentage of rigor cross-bridges immediately following MgATP release.     

Roles of the hydrophobic triplet in the motor domain of myosin in the interaction between myosin and actin

Myosin is a molecular motor and a member of a protein family comprising at least 18 classes. There is an about 1,000-fold difference in the in vitro sliding velocity between the fastest myosin and the slowest one. Previous studies revealed that the hydrophobic triplet in the motor domain (Val534, Phe535, and Pro536 in Dictyostelium myosin) is important for the strong binding of myosin to actin. We studied the role of the triplet in the sliding motion of myosin by means of site directed mutagenesis because the sliding velocity is determined by the time that myosin interacts with actin strongly. We produced mutant Dictyostelium myosins and subfragment-1s that have the triplet sequences of various classes of myosin with different sliding velocities. The V(max) and K(actin) values of the actin-activated ATPase for all these mutant subfragment-1s were lower than those of the wild-type Dictyostelium myosin. The mutant myosins exhibited much lower sliding velocities than the wild type. The time that the mutant subfragment-1s are in the strongly bound state did not correlate well with the sliding velocity. Our results suggested that (i) the hydrophobic triplet alone does not determine the sliding velocity of myosin, (ii) the size of the amino acid side chain in the triplet is crucial for the ATPase activity and the motility of myosin, and (iii) the hydrophobic triplet is important not only for strong binding to actin but also for the structural change of the myosin motor domain during the power stroke.     

In vitro actin filament sliding velocities produced by mixtures of different types of myosin.

Using in vitro motility assays, we examined the sliding velocity of actin filaments generated by pairwise mixings of six different types of actively cycling myosins. In isolation, the six myosins translocated actin filaments at differing velocities. We found that only small proportions of a more slowly translating myosin type could significantly inhibit the sliding velocity generated by a myosin type that translocated filaments rapidly. In other experiments, the addition of noncycling, unphosphorylated smooth and nonmuscle myosin to actively translating myosin also inhibited the rapid sliding velocity, but to a significantly reduced extent. The data were analyzed in terms of a model derived from the original working cross-bridge model of A.F. Huxley. We found that the inhibition of rapidly translating myosins by slowly cycling was primarily dependent upon only a single parameter, the cross-bridge detachment rate at the end of the working powerstroke. In contrast, the inhibition induced by the presence of noncycling, unphosphorylated myosins required a change in another parameter, the transition rate from the weakly attached actomyosin state to the strongly attached state at the beginning of the cross-bridge power stroke.     

Effects of urea and guanidine hydrochloride on the sliding movement of actin filaments with ATP hydrolysis by myosin molecules

To evaluate the role of the hydration layer on the protein surface of actomyosin, we compared the effects of urea and guanidine-HCl on the sliding velocities and ATPase activities of the actin-heavy meromyosin (HMM) system. Both chemicals denature proteins, but only urea perturbs the hydration layer. Both the sliding velocity of actin filaments and actin-activated ATPase activity decreased with increasing urea concentrations. The sliding movement was completely inhibited at 1.0 M urea, while actin filaments were bound to HMM molecules fixed on the glass surface. Guanidine-HCl (0-0.05 M) drastically decreased both the sliding velocity and ATPase activation of acto-HMM complexes. Under this condition, actin filaments almost detached from HMM molecules. In contrast, the ATPase activity of HMM without actin filaments was almost independent of urea concentrations <1.0 M and guanidine-HCl concentrations <0.05 M. An increase in urea concentrations up to 2.0 M partly induced changes in the ternary structure of HMM molecules, while the actin filaments were stable in this concentration range. Hydration changes around such actomyosin complexes may alter both the stability of part of the myosin molecules, and the affinity for force transmission between actin filaments and myosin heads.     

The Loop2 Insertion of Type IX Myosin Acts as an Electrostatic Actin Tether that Permits Processive Movement

Although class IX myosins are single-headed, they demonstrate characteristics of processive movement along actin filaments. Double-headed myosins that move processively along actin filaments achieve this by successive binding of the two heads in a hand-over-hand mechanism. This mechanism, obviously, cannot operate in single-headed myosins. However, it has been proposed that a long class IX specific insertion in the myosin head domain at loop2 acts as an F-actin tether, allowing for single-headed processive movement. Here, we tested this proposal directly by analysing the movement of deletion constructs of the class IX myosin from Caenorhabditis elegans (Myo IX). Deletion of the large basic loop2 insertion led to a loss of processive behaviour, while deletion of the N-terminal head extension, a second unique domain of class IX myosins, did not influence the motility of Myo IX. The processive behaviour of Myo IX is also abolished with increasing salt concentrations. These observations directly demonstrate that the insertion located in loop2 acts as an electrostatic actin tether during movement of Myo IX along the actin track.     

ATPase activities and actin-binding properties of subfragments of Acanthamoeba myosin IA

Previous studies had led to the conclusion that the globular, single-headed myosins IA and IB from Acanthamoeba castellanii contain two actin-binding sites: one associated with the catalytic site and whose binding to F-actin activates the Mg2+-ATPase activity and a second site whose binding results in the cross-linking of actin filaments and makes the actin-activated ATPase activity positively cooperative with respect to myosin I concentration. We have now prepared a 100,000-Da NH2-terminal peptide and a 30,000-Da COOH-terminal peptide by alpha-chymotryptic digestion of the myosin IA heavy chain. The intact 17,000-Da light chain remained associated with the 100,000-Da fragment, which also contained the serine residue that must be phosphorylated for expression of actin-activated ATPase activity by native myosin IA. The 30,000-Da peptide, which contained 34% glycine and 21% proline, bound to F-actin with a KD less than 0.5 microM in the presence or absence of ATP but had no ATPase activity. The 100,000-Da peptide bound to F-actin with KD = 0.4-0.8 microM in the presence of 2 mM MgATP and KD less than 0.01 microM in the absence of MgATP. In contrast to native myosin IA, neither peptide cross-linked actin filaments. The phosphorylated 100,000-Da peptide had actin-activated ATPase activity with the same Vmax as that of native phosphorylated myosin IA but this activity displayed simple, noncooperative hyperbolic dependence on the actin concentration in contrast to the complex cooperative kinetics observed with native myosin IA. These results provide direct experimental evidence for the presence of two actin-binding sites on myosin IA, as was suggested by enzyme kinetic and filament cross-linking data, and also for the previously proposed mechanism by which monomeric myosins I could support contractile activities.     

Calcium-triggered movement of regulated actin in vitro. A fluorescence microscopy study

We previously reported setting up an in vitro system for the observation of actin filament sliding along myosin filaments. The system involved a minute amount of fluorescently labelled F-actin, and its movement was monitored by fluorescence microscopy. Here, we report observations of the Ca2+-dependent movement of F-actin complex with tropomyosin plus troponin (regulated actin) added to the movement system in place of pure F-actin. In a wide range of pCa (-log10[Ca2+]) between 3 and 5.5 at 30 degrees C, regulated actin filaments moved rapidly, and the average velocity depended little on the Ca2+ concentration (about 7.5 microns/s). However, when the Ca2+ concentration was decreased to pCa = 5.8 or lower, the filaments suddenly stopped moving. In striking contrast to these observations, unregulated actin moved rapidly within the whole pCa range examined, the average velocity (about 7.5 microns/s) being essentially Ca2+-independent. These observations indicate that (1) tropomyosin-troponin actually gave Ca2+-sensitivity to F-actin, and (2) the movement system was regulated by Ca2+ in an on-off fashion within a narrow range of Ca2+ concentration. In a pCa range between 5.8 and 6.0, regulated actin filaments did not exhibit thermal motion; instead, they had fixed positions in the specimen, possibly because they remained associated with myosin filaments in the background, without sliding past each other. Although regulated actin moved fast in the presence of 1 mM-CaCl2 (pCa = 3) at 30 degrees C, it became entirely non-motile as the temperature was decreased to 25 degrees C or lower. Such a sharp movement/temperature relation was never found for unregulated actin. We assayed regulated actin-activated myosin ATPase in the same conditions as used for microscopy, and found that the ATPase activity depended both on pCa and on the temperature considerably less than the movement of regulated actin. The results suggest that the sliding velocity in the in vitro system would not be proportional to the rate of actin-activated ATPase.     

Role of the regulatory light chains in skeletal muscle actomyosin ATPase and in minifilament formation

Incubation of myosin with myopathic hamster protease results in substantial (more than 80%) removal of light chain 2 (LC2) with limited breakdown of the heavy chains. LC2-deficient myosin, purified by ion exchange chromatography, migrates as a single, monodisperse boundary in the analytical ultracentrifuge. The Ca2+- and EDTA-activated ATPases of LC2-deficient myosin are similar to those of the control and LC2-recombined myosins indicating that no denaturation occurred in its preparation. Double reciprocal plots for LC2-deficient, control, and LC2-recombined myosins reveal a biphasic behavior i.e. at actin concentrations above 11 microM, there is a sharp break in the 1/V versus 1/[actin] plots for all samples. The Vm values for LC2-deficient myosin are 50% lower (at low actin, Vm = 3.0 s-1, and at high actin, Vm = 4.2 s-1) than those for control myosin (Vm = 5.3 s-1 at low actin and 8.3 s-1 at high actin). Readdition of LC2 to LC2-deficient myosin restores the actin-activated ATPase to control levels. Electron microscopy of shadow cast preparations reveals a subtle difference between LC2-deficient myosin, and control or recombined myosin. In control and recombined myosins, S1 heads appear "pear"-shaped, whereas in LC2-deficient myosin, the S1 heads are rounder and display a "thinning" of mass in the "neck" region, suggesting that LC2 binds at the S1/S2 junction. Furthermore, removal of LC2 apparently influences the assembly of myosin into minifilaments, as revealed to a certain degree, by an increase in the width of the bare zone, accompanied by a decrease in the stability of these minifilaments.     

A deterministic mechanism producing the loose coupling phenomenon observed in an actomyosin system

Myosins are molecular motors that convert the chemical energy of ATP into mechanical work called a power stroke. Class II myosin engaged in muscle contraction is reported to show a "loose coupling phenomenon", in which the number of power strokes is greater than the number of ATP hydrolyses. This phenomenon cannot be explained by the lever-arm hypothesis, which is currently accepted as a standard theory for myosin motility. In this paper, a model is proposed to reproduce the loose coupling phenomenon. The model is based on a mechanochemical process called "Driven by Detachment (DbD)" mechanism, which assumes that the energy of the power strokes originates from the potential energy generated by the attractive force between myosin and actin. During the docking process, the potential energy is converted into an intramolecular strain in a myosin molecule, which drives the power stroke after the myosin is firmly attached to an actin filament. The energy of ATP is used to temporarily reduce the attractive force and to increase the potential energy. Therefore, it is not directly linked to the power strokes. When myosin molecules work as an aggregate, the sliding movement of a myosin filament driven by the power strokes of some myosin heads makes other myosin heads that have completed their power strokes detach from the actin without consuming ATP. Under the DbD mechanism, these passively detached myosins can be again engaged in power strokes after the next attachment to actin. As a result, the number of power strokes becomes greater than the number of ATP hydrolyses, and the loose coupling phenomenon will be observed. A theoretical analysis indicates that the efficiency of converting the potential energy into intramolecular elastic energy determines the number of power strokes per each ATP hydrolysis. Computer simulations showed that the DbD mechanism actually produced the loose coupling phenomenon. A critical requirement for this mechanism is that ATP must preferentially facilitate the detachment of myosins that have completed their power strokes, but are still strongly attached to the actin. This requirement may be fulfilled by ATP hydrolysis tightly depending on the conformation of a myosin molecule.     

Characean actin bundles as a tool for stydying actomyosin-based motility

At the inner surface of the stagnant chloroplasts of Characeae cells, bundles of actin filaments having uniform polarity are anchored. These bundles are responsible for generating the motive force of cytoplasmic streaming. It is now possible to induce movement of either beads coated with foreign myosin or organelles associated with myosin along the characean actin bundles. The Ca²⁺ sensitivities of the reconstitued movements are consistent with those of the actin-activated myosin ATPases. The use of reconstituted systems is finding wide application in the detection of various myosins in materials from which myosin is not significantly purified. Furthermore, sliding velocities and the Ca²⁺ regulation of myosins bound to organelles are now being determined. Recipient of the Botanical Society Award for Young Scientists, 1987.     

Inorganic polyphosphate hydrolysis catalyzed by skeletal muscular actomyosin complexes is uncoupled with motility

Hydrolysis of the triphosphate moiety of ATP, catalyzed by myosin, induces alterations in the affinity of the myosin heads for actin filaments via conformational changes, thereby causing motility of the actomyosin complexes. To elucidate the contribution of the triphosphate group attached to adenosine, we examined the enzymatic activity of heavy meromyosin (HMM) with actin filaments for inorganic tripolyphosphate (3PP) using a Malachite green method and evaluated using fluorescence microscopy the effects of 3PP on actin filament motility on HMM-coated glass slides. In the presence of MgCl₂, HMM hydrolyzed 3PP at a maximum rate of 0.016 s⁻¹ HMM⁻¹, which was four times lower than the hydrolysis rate of ATP. Tetrapolyphosphate (4PP) was hydrolyzed at a rate similar to that of 3PP hydrolysis. The hydrolysis rates of 3PP and 4PP were enhanced by roughly 10-fold in the presence of actin filaments. In motility assays, the presence of polyphosphates did not lead to the sliding movement of actin filaments. Moreover, in the presence of ATP at low concentrations, the sliding velocity of actin filaments decreased as the concentration of added polyphosphate increased, indicating a competitive binding of polyphosphate to myosin heads with ATP. These results suggested that the energy produced by standalone triphosphate hydrolysis did not induce the unidirectional motion of actomyosin and that the link between triphosphate and adenosine was crucial for motility.