A combination of ultrasonic-assisted extraction with RRLC-QQQ method for the determination of artemisinin in the Chinese herb Artemisia annua L

Introduction – Artemisinin, the primary active ingredient of the Chinese herb Artemisia annua L., is known to have considerable anti‐malaria properties. However, rapid, sensitive and selective method for the determination of artemisinin in it is not currently available. Objective – To develop and validate an efficient method for extraction and analysis of artemisinin from the plant samples of Artemisia annua L. by rapid resolution liquid chromatography triple quadrupole mass spectrometry (RRLC‐QQQ). Methodology – Following ultrasound‐assisted extraction (USE), RRLC‐QQQ was utilised to separate and determine artemisinin from the plant sample of Artemisia annua L. The LC separation, QQQ‐MS detection and multiple reaction monitoring (MRM) mode were optimised, and the method validation concluding selectivity, calibration, accuracy and precision, and recovery were also evaluated. Results – LC separation was performed with an isocratic elution of 20% of methanol–water (10 mmol/L ammonium acetate, pH 4.0) on a C₁₈ column. The triple quadrupole MS detection was carried out under MRM mode of precursor ion [M + H]⁺ → fragment ions m/z 265.1 and m/z 247.2. The limits of detection and quantitation of artemisinin were 0.20 and 0.75 ng/mL, respectively. The intra‐ and inter‐day precisions did not exceed 3.71%, and the deviation of the intra‐ and inter‐day mean values did not exceed ±7.50. The average recoveries for artemisinin ranged from 92.45 to 103.8% with an RSD from 2.47 to 2.79%. Conclusion – The developed RRLC‐QQQ assay is an efficient method for separation and determination of artemisinin from the plant samples of Artemisia annua L. Copyright © 2011 John Wiley & Sons, Ltd.     

Enantioseparation and determination of flumequine enantiomers in multiple food matrices with chiral liquid chromatography coupled with tandem mass spectrometry

The present work firstly described the enantioseparation and determination of flumequine enantiomers in milk, yogurt, chicken, beef, egg, and honey samples by chiral liquid chromatography‐tandem mass spectrometry. The enantioseparation was performed under reversed‐phase conditions on a Chiralpak IC column at 20°C. The effects of chiral stationary phase, mobile phase components, and column temperature on the separation of flumequine enantiomers have been studied in detail. Target compounds were extracted from six different matrices with individual extraction procedure followed by cleanup using Cleanert C18 solid phase extraction cartridge. Good linearity (R²>0.9913) was obtained over the concentration range of 0.125 to 12.5 ng g^‐1 for each enantiomer in matrix‐matched standard calibration curves. The limits of detection and limits of quantification of two flumequine enantiomers were 0.015‐0.024 and 0.045‐0.063 ng g^‐1, respectively. The average recoveries of the targeted compounds varied from 82.3 to 110.5%, with relative standard deviation less than 11.7%. The method was successfully applied to the determination of flumequine enantiomers in multiple food matrices, providing a reliable method for evaluating the potential risk in animal productions.     

Gas chromatography–mass spectrometry based sensitive analytical approach to detect and quantify non-polar pesticides accumulated in the fat tissues of domestic animals

A fast and simple technique is proposed for the detection and quantitative determination of six non-polar pesticides including pyrethroids (cypermethrin, deltamethrin), organochlorines (hexachlorobenzene, α-hexachlorocyclohexane) and organophosphorus (chlorpyrifos, fenitrothion) accumulated in fat tissues of local cattle, sheep and goats. Gas chromatography coupled to mass spectrometry detection (GC–MS) adapted to cleanup procedures based on solid-phase extraction from QuEChERS method was adopted. The work was performed for quantitative affirmation of most customarily used pesticides in Sulaymaniyah, Kurdistan Region of Iraq and also the impact of boiling (100 °C, 30 min) and broiling (176 °C, 20 min) on chosen pesticides was evaluated. Among the results of 150 fat samples presented, the dominant compound in cattle samples was hexachlorobenzene (0.236 mg kg⁻¹); while, in sheep and goats it was deltamethrin (0.248 and 0.122 mg kg⁻¹ respectively). Boiling reduced pesticide concentration significantly (P < 0.05) and the most reduced group was pyrethroids in both techniques. Good responses for the six analytes were obtained at validation level of 0.01–0.1 mg kg⁻¹. The linear coefficient was between 0.9997 and 0.9999 and limits of detection (LOD) and quantification (LOQ) ranged 0.0052–0.014 mg kg⁻¹ and 0.015–0.044 mg kg⁻¹ respectively. Acceptable recoveries (81.5–98.6%) and relative standard deviation (0.3–9.3%) were obtained in different spiked levels. The validation results confirmed that the proposed GC–MS technique can be utilized as a dependable screening apparatus for the quantitative screening of studied pesticides in fat tissues with accuracy and sensitivity, if deployed along with solid-phase extraction based QuEChERS method.     

Onsite chelate resin solid-phase extraction of rare earth elements in natural water samples: its implication for studying past redox changes by inorganic geochemistry

Rare earth element (REE) patterns in natural water and geological samples provide information on previous changes in environmental conditions, such as redox changes and material cycles; however, quantitative analysis of REEs in these samples is complicated by the relatively low contents of REEs in such samples as well as mass interference from ¹³⁵Ba¹⁶O and ¹³⁷Ba¹⁶O in inductively coupled plasma mass spectrometry (ICP-MS) analyses. In this study, onsite solid-phase extraction and preconcentration methods for REEs using an iminobisacetic acid–ethylenediaminetriacetic acid chelate resin (Nobias Chelate PA1, Hitachi High-Tech Fielding) were adopted for the analyses. Standard reference materials (SPS-SW1 artificial surface water) and natural ground water and spring water samples were used to evaluate the methods. Using the chelate resin, background levels of REEs were found to be less than 0.3 ng L^?1 and recovery rates (REEs, 1 ng L^?1) were 97.9–106.7% for the artificial surface water. Ba contents were lower than the detection limit after extraction. Additionally, duplicate analyses were performed to check the reproducibility of the onsite extraction. The REE patterns in the natural water samples were in good agreement with those obtained using a previous method (the interference calibration method without solid-phase extraction). Therefore, onsite solid-phase extraction using the chelate resin was demonstrated to be a rapid and simple preparation technique for REE analyses.     

Optimization of ASE and SPE conditions for the HPLC‐FLD detection of piperazine in chicken tissues and pork

Accelerated solvent extraction (ASE) and solid‐phase extraction (SPE) conditions were optimized by a high‐performance liquid chromatography‐fluorescence detector (HPLC‐FLD) method for the detection of piperazine in chicken tissues and pork. Piperazine residues were determined by precolumn derivatization with trimethylamine and dansyl chloride. Samples were extracted with 2% formic acid in acetonitrile using an ASE apparatus and purified using a Strata‐X‐C SPE column. The monosubstituted product of the reaction of piperazine with dansyl chloride was 1‐dansyl piperazine (1‐DNS‐piperazine). Chromatographic separations were performed on an Athena C₁₈ column (250 × 4.6 mm, id: 5 μm) with gradient elution using ultrapure water and acetonitrile (5:95, V/V) as the mobile phase. The calibration curves showed good linearity over a concentration range of LOQ‐200.0 μg/kg with a coefficient of determination (R²) ≥ .9992. The recoveries and relative standard deviations (RSD values) ranged from 78.49% to 97.56% and 1.19% to 5.32%, respectively, across the limit of quantification (LOQ) and 0.5, 1, and 2.0 times the maximum residue limit (MRL; μg/kg). The limits of detection (LODs) and LOQs were 0.96 to 1.85 μg/kg and 3.20 to 5.50 μg/kg, respectively. The method was successfully applied for the validation of animal products in the laboratory.     

Amberlite IR-120 Modified with 8-Hydroxyquinoline as Efficient Adsorbent for Solid-Phase Extraction and Flame Atomic Absorption Determination of Trace Amounts of Some Metal Ions

In this study, a solid-phase extraction method combined with atomic absorption spectrometry for extraction, preconcentration, and determination of iron (Fe³⁺), copper (Cu²⁺), and lead (Pb²⁺) ions at trace levels in water samples has been reported. The influences of effective parameters such as flow rate, pH, eluent conditions (type, volume, and concentration), sample volumes, and interference of matrix ions on metal ions recoveries were studied. Under optimized conditions, the limits of detection were found in the range of 0.7–2.2 μg L⁻¹, while preconcentration factors for Fe³⁺, Cu²⁺, and Pb²⁺ ions were found to be 166, 200, and 250, respectively, and loading half time (t _1/2) values were less than 2 min for all analyte ions. The proposed procedure was applied for the determination of metal ions in different water samples with recovery of >94.4% and relative standard deviation less than 4.4% for N = 5.     

Identification and quantification of five macrolide antibiotics in several tissues, eggs and milk by liquid chromatography–electrospray tandem mass spectrometry

We present an electrospray high-performance liquid chromatographic tandem mass spectrometric (HPLC–MS–MS) method capable of determining in several tissues (muscle, kidney, liver), eggs and milk the following five macrolides: tylosin, tilmicosin, spiramycin, josamycin, erythromycin. Roxithromycin was used as an internal standard. The method uses extraction in a Tris buffer at pH 10.5, followed by protein precipitation with sodium tungstate and clean-up on an Oasis solid-phase extraction column. The HPLC separation was performed on a Purospher C₁₈ column (125×3 mm I.D.) protected by a guard column, with a gradient of aqueous 0.1 M ammonium acetate–acetonitrile as the mobile phase at a flow-rate of 0.7 ml min⁻¹. Protonated molecules served as precursor ions for electrospray ionisation in the positive ion mode and four product ions were chosen for each analyte for multiple reaction monitoring (MRM). A validation study was conducted to confirm the five macrolides by MRM HPLC–MS–MS analysis of a negative control and fortified samples. All of the samples analysed were confirmed with four ions. The ion ratio reproducibility limit ranged from 2.4 to 15%. All compounds could be detected and quantified at half-maximum residue limits (MRLs). The method is specific, quantitative and reproducible enough to conform to European Union recommendations within the concentration range 0.5 MRL–2 MRL (accuracy: 80 to 110%, relative standard deviation: 2 to 13%). This whole method allows extraction and analysis of up to 50 samples per day.     

Quantitative analysis of levamisole in porcine tissues by high-performance liquid chromatography combined with atmospheric pressure chemical ionization mass spectrometry

This work presents the development and the validation of an LC–MS–MS method with atmospheric pressure chemical ionization for the quantitative determination of levamisole, an anthelmintic for veterinary use, in porcine tissue samples. A liquid–liquid back extraction procedure using hexane–isoamylalcohol (95:5, v/v) as extraction solvent was followed by a solid-phase extraction procedure using an SCX column to clean up the tissue samples. Methyllevamisole was used as the internal standard. Chromatographic separation was achieved on a LiChrospher^® 60 RP-select B (5 μm) column using a mixture of 0.1 M ammonium acetate in water and acetonitrile as the mobile phase. The mass spectrometer was operated in MS–MS full scanning mode. The method was validated for the analysis of various porcine tissues: muscle, kidney, liver, fat and skin plus fat, according to the requirements defined by the European Community. Calibration graphs were prepared for all tissues and good linearity was achieved over the concentration ranges tested (r>0.99 and goodness of fit <10%). Limits of quantification of 5.0 ng/g were obtained for the analysis of levamisole in muscle, kidney, fat and skin plus fat tissues, and of 50.0 ng/g for liver analysis, which correspond in all cases to half the MRLs (maximum residue limits). Limits of detection ranged between 2 and 4 ng/g tissue. The within-day and between-day precisions (RSD, %) and the results for accuracy fell within the ranges specified. The method has been successfully used for the quantitative determination of levamisole in tissue samples from pigs medicated via drinking water. Moreover the product ion spectra of the levamisole peak in spiked and incurred tissue samples were in close agreement (based on ion ratio measurements) with those of standard solutions, indicating the worthiness of the described method for pure qualitative purposes.     

Validation of high-performance liquid chromatographic assay methods for the analysis of carboplatin in plasma ultrafiltrate

Validation of two HPLC assays for the quantitation of carboplatin in human plasma ultrafiltrate is described. Both assay methods employed a YMC ODS-AQ 3.9×150 mm (3 μm) column for the chromatographic separation. The first method utilized direct UV detection, the second method utilized UV detection following post-column derivatization with sodium bisulfite. Structural analogues of carboplatin were synthesized and used as internal standards for the assays. With direct UV detection, sample clean-up using solid-phase extraction on amino cartridges was required prior to injection, with extraction recoveries ranging from 80 to 90%. This extraction procedure was not necessary with the post-column reaction method, which employed a more selective analytical wavelength. Unfortunately, instability of the post-column reagent was a problem and led to greater variability in predicted concentration values. For standard curves, a weighted (1/y²) regression approach was used for plots of peak area or peak height ratio (carboplatin/internal standard) vs. carboplatin concentration. The limit of detection of both assays was 0.025 μg/ml and both were validated for carboplatin concentrations from 0.05 to 40 μg/ml. Accuracy and precision data were generated using three batches of validation samples, each batch consisting of a standard curve and five sets of quality control samples. Stability of carboplatin in blood, plasma, plasma ultrafiltrate, and reconstituted extracts was evaluated. The assay methods were employed for the pharmacokinetic analysis of blood samples drawn from a pediatric patient that received a 400 mg/m² dose of carboplatin.     

Solid-phase extraction of tramadol from plasma and urine samples using a novel water-compatible molecularly imprinted polymer

In this study, a novel method is described for the determination of tramadol in biological fluids using molecularly imprinted solid-phase extraction (MISPE) as the sample clean-up technique combined with high-performance liquid chromatography (HPLC). The water-compatible molecularly imprinted polymers (MIPs) were prepared using methacrylic acid as functional monomer, ethylene glycol dimethacrylate as cross-linker, chloroform as porogen and tramadol as template molecule. The novel imprinted polymer was used as a solid-phase extraction (SPE) sorbent for the extraction of tramadol from human plasma and urine. Various parameters affecting the extraction efficiency of the polymer have been evaluated. The optimal conditions for the MIP cartridges were studied. The MIP selectivity was evaluated by checking several substances with similar molecular structures to that of tramadol. The limit of detection (LOD) and limit of quantification (LOQ) for tramadol in urine samples were 1.2 and 3.5 μg L⁻¹, respectively. These limits for tramadol in plasma samples were 3.0 and 8.5 μg L⁻¹, respectively. The recoveries for plasma and urine samples were higher than 91%.     

Simultaneous quantitation of plasma doxorubicin and prochlorperazine content by high-performance liquid chromatography

A high-performance liquid chromatographic method has been developed and tested for simultaneous extraction, elution and determination of doxorubicin and prochlorperazine content in human plasma samples. The procedure consists of extraction through a conditioned C₁₈ solid-phase extraction cartridge, elution from a Spherisorb C₈ reversed-phase column by an isocratic mobile phase (60% acetonitrile, 15% methanol and 25% buffer) followed by detection with electrochemical and fluorescence detectors. Recovery of doxorubicin and prochlorperazine from pooled human plasma samples (n=3) containing 100 ng/ml of the two drugs was 77.8±3.5% and 89.1±6.0%, respectively. The lower limits of quantitation for doxorubicin and prochlorperazine in plasma samples were 6.25 ng/ml and 10 ng/ml, respectively. A linear calibration curve was obtained for up to 2 μg/ml of doxorubicin and prochlorperazine. This combination method may be of particular value in clinical studies where phenothiazines such as prochlorperazine are used to enhance retention of doxorubicin in drug resistant tumor cells.     

Determination of trace cadmium in saliva samples using spray assisted droplet formation-liquid phase microextraction prior to the measurement by slotted quartz tube-flame atomic absorption spectrophotometry

BackgroundAn effective, green and rapid analytical strategy namely the simultaneous spray assisted droplet formation-liquid phase microextraction (S-SADF-LPME) method was developed for the determination of trace quantity of cadmium in saliva samples by using the slotted quartz tube-flame atomic absorption spectrophotometry (SQT-FAAS). By the developed method, external dispersive solvent usage for droplet formation was reduced to obtain a more environmental-friendly method.MethodsMethod consists of a simultaneous complexing and extraction step, which was based on spraying an extraction solvent containing a solid ligand into the aqueous sample solution, forming fine droplets without the use of dispersive solvent. The procedure was implemented using a customized, cost effective and portable spray apparatus to minimize the consumption of reagent, analysis time and operation steps. Thus, this methodology ensures better repeatability and accuracy while minimizing the relative errors caused by the experimental steps. Parameters including the buffer amount, extractant/ligand concentration, extraction solvent type, extraction/ligand solution volume, spraying number and vortex period were systemically optimized to lower the detection limit.ResultsUnder the optimal extraction conditions, 96.9-folds enhancement in the detection power of the traditional FAAS was achieved. The limit of detection and limit of quantification values of presented method were calculated to be 0.65 and 2.17 ng mL⁻¹, respectively. Accuracy and applicability of the optimized method was investigated by collecting saliva samples from smokers. Satisfactory percent recovery values wereachieved for cadmium with a low standard deviation in the acceptable range of 84.9–109.6 %.ConclusionThe developed dispersive solvent-free S-SADF-LPME technique presents a fast, simple, cost-effective and eco-friendly microextraction method based on the use of an easily accessible and functional spray apparatus.     

Determination of 5-S-cysteinyldopa in plasma and urine using a fully automated solid-phase extraction–high-performance liquid chromatographic method for an improvement of specificity and sensitivity of this prognostic marker of malignant melanoma

5-S-Cysteinyldopa (5-SCD) in plasma and urine was determined by means of a newly developed method. This method incorporates optimized conditions for blood collection and storage, as well as a new extraction and separation technique, required for the strong oxidation and light sensitive 5-SCD. The new aspects of the method are the following: immediate centrifugation and freezing of the samples after blood collection, fully automatical solid-phase extraction (SPE) with phenylboronic acid (PBA) cartridges and immediate HPLC injection of the eluate, nearly complete exclusion of light and air–oxygen during extraction, constant sample cooling, use of the more suitable internal standard 5-S- -cysteinyldopa and easy, sensitive and selective HPLC conditions (RP18-column with isocratic separation and electrochemical detection). The method has a linear range from 0.25 to 50 μg l⁻¹ and 25 to 5000 μg l⁻¹ for plasma and urine samples, respectively, a limit of detection of 0.17 μg l⁻¹, intra-assay variabilities from 1.7 to 3.6%, inter-assay variabilities from 4.0 to 18.3% and an average relative recovery of 103.5% for plasma and 105.4% for urine samples. In our study the measured 5-SCD concentrations of patients with melanomas at various stages correlated better with their clinical pictures than described in literature up to date. The results were obtained in comparison to patients with other skin tumors and in comparison to healthy control persons.     

Simultaneous determination of cyanide and thiocyanate in blood by ion chromatography with fluorescence and ultraviolet detection

An ion chromatographic method for the simultaneous determination of cyanide and thiocyanate in blood has been developed. After extraction by adding water and methanol to blood, cyanide was derivatized with 2,3-naphthalenedialdehyde and taurine to give a fluorescent product of 1-cyanobenz[f]isoindole. This compound was detected with high sensitivity by fluorometry and the underivatized thiocyanate was detected by ultraviolet absorption. The detection limits were 3.8 pmol ml⁻¹ for cyanide and 86 pmol ml⁻¹ for thiocyanate, and the recoveries from blood were ca. 83% and ca. 100%, respectively. The proposed method was successfully applied to the analysis of both anions in blood from smokers, non-smokers and fire victims.     

Validation of a high-performance liquid chromatography assay for urinary nedocromil sodium following oral and inhaled administration

The validation of a solid-phase extraction and an ion pair high-performance liquid chromatographic assay for the determination of nedocromil sodium (NCS) in urine samples following oral and inhaled administration to healthy volunteers is described. NCS and its internal standard sodium cromoglycate (SCG) were extracted from urine samples using solid-phase extraction and then quantified using high-performance liquid chromatography (HPLC). A 25-cm C₈ Spherisorb 5 μm stationary phase with a mobile phase containing a long alkyl chain ion-pair reagent (methanol–0.045 M phosphate buffer–0.05 M dodecyl triethyl ammonium phosphate; 550:447.6:2.4, v/v) was used. The mean (S.D.) intra-day accuracy and precision of the HPLC assay was 99.9 (1.6) and 7.05 (4.9)%, respectively. These values for the inter-day data were 102.4 (4.07) and 10.5 (2.7)%, respectively, over the concentration range investigated. The method described permits the detection of NCS in human urine at concentrations as low as 0.04 μg ml⁻¹ where the signal-to-noise ratio is greater than 3:1. In 10 healthy volunteers a significantly greater amount of NCS was excreted in the urine following inhalation than after oral dosing (p<0.001). The mean (S.D.) amount of NCS renally excreted at 0.5, 1.0 and 24 h following inhalation of four 2-mg doses of NCS from a metered dose inhaler (MDI) was 0.513 (0.24), 1.163 (0.49) and 4.00 (1.73)% of the nominal dose. Similar values after oral administration of 8 mg of NCS were 0.026 (0.03), 0.079 (0.06) and 0.930 (0.74)%, respectively.     

Therapeutic drug monitoring of flecainide in serum using high-performance liquid chromatography and electrospray mass spectrometry

High-performance liquid chromatography with electrospray mass spectrometry (LC–MS) was used for analysis of the drug flecainide in serum. The clean-up was performed by solid-phase extraction, and an aromatic ring positional isomer was used as internal standard. Results from method validation on spiked serum samples showed excellent reproducibility; intra- and inter-assay variations (C.V.% and %Bias) were less than 6% within the therapeutic concentration range of the drug (0.2–1.0 μg/ml). Linearity was demonstrated from 0.05 to 2.0 μg/ml. The limit of detection and quantification was 0.025 and 0.05 μg/ml, respectively. Due to the high selectivity of the mass spectrometric detection, no interferences were observed. Results from clinical samples (n=18) from patients in treatment with Tambocor (flecainide acetate) showed excellent correlation with parallel data obtained from a method based on high-performance liquid chromatography (HPLC) with fluorescence detection after liquid/liquid extraction. The chromatographic separation of flecainide and internal standard was improved compared to earlier HPLC methods. The methodology is simple, accurate and requires only 0.25 ml of sample. It is a well suited method for routine therapeutic drug monitoring in a hospital or clinical chemistry laboratory.     

Quantitative determination of butorphanol and its metabolites in human plasma by gas chromatography-electron capture negative-ion chemical ionization mass spectrometry

Two separate analytical methods have been developed for the determination of butorphanol and its metabolites in human plasma. One method is specific for butorphanol (I) while the other determines the metabolites, hydroxybutorphanol (II) and norbutorphanol (III). Both procedures incorporate solid-phase extraction, chemical derivatization and separation, and detection using gas chromatography-electron-capture negative-ion chemical ionization mass spectrometry (GC-ECNCI-MS). Both methods use the cyclopropyl analog of I (BC-2605, IV) as the internal standard and the procedures for extraction of the analytes from plasma are identical. However, following extraction, either the pentafluorobenzoyl ester of I or the tris- and bis-trifluoroacetyl esters of II and III, respectively, were prepared. The derivatives were analyzed by GC-ECNCI-MS with selected-ion monitoring of the molecular ions. The standard curves were linear over the concentration ranges of 20–2000, 20–1000 and 50–1000 pg/ml for I, II and III, respectively. All standard curves from the assay validation had r² values of ≥0.994, 0.991 and 0.985 for I, II and III, respectively. For all three compounds, the intra- and inter-assay precisions (CV) and inter-assay accuracy (deviation from nominal) were within 12% for plasma quality control samples. All derivatives were stable in the reconstitution solvent for at least 24 h. The assays are being used for the determination of plasma concentrations of I, II and III in humans following repeated administration of nasal spray.     

研究报告: 基于核酸适配体的胶体金比色法检测鳗弧菌

目的 鳗弧菌（Vibrio anguillarum）可引起鲑鱼、鳗鲡、鲈鱼和牙鲆等多种水产养殖动物的疾病，是水产养殖中的一种重要病原菌，对其进行快速检测是确保水产养殖安全和食品安全所必需的。方法 本文利用鳗弧菌与其核酸适配体之间较强的亲和力，通过鳗弧菌夺取胶体金颗粒表面的核酸适配体，使胶体金溶液的吸光度发生变化，从而建立一种可定量检测鳗弧菌的方法。结果 该方法对鳗弧菌的吸光度值显著高于对溶藻弧菌、铜绿假单胞菌、变形假单胞菌、嗜水气单胞菌和迟钝爱德华氏菌等非目标菌的吸光度值（P<0.01），并在1~10⁵ CFU/ml的检测范围内呈现较好的线性关系。用该方法对不同盐度和鱼体组织样品进行加标回收检测，结果显示回收率和相对标准偏差等指标都符合相应检测标准。结论 该检测方法对鳗弧菌有较好的特异性，可用于水产品或食品中鳗弧菌的定量检测。     

A porphyrin‐based fluorescence method for zinc determination in commercial propolis extracts without sample pretreatment

The quantification of zinc in over‐the–counter drugs as commercial propolis extracts by molecular fluorescence technique using meso ‐tetrakis(4‐carboxyphenyl)porphyrin (H₂TCPP⁴) was developed for the first time. The calibration curve is linear from 6.60 to 100 nmol L^?1 of Zn²⁺. The detection and quantification limits were 6.22 nmol L^?1 and 19.0 nmol L^?1, respectively. The reproducibility and repeatability calculated as the percentage variation of slopes of seven calibration curves were 6.75% and 4.61%, respectively. Commercial propolis extract samples from four Brazilian states were analyzed and the results (0.329–0.797 mg/100 mL) obtained with this method are in good agreement with that obtained with the Atomic Absorption Spectroscopy (AAS) technique. The method is simple, fast, of low cost and allows the analysis of the samples without pretreatment. Moreover the major advantage is that Zn‐porphyrin complex presents fluorescent characteristic promoting the selectivity and sensitivity of the method.     

Determination of moniliformin using SAX column clean-up and HPLC/DAD-detection

This work describes a method for the determination of theFusarium mycotoxin moniliformin (MON) in cereals. In addition to the optimization of the clean-up and the HPLC determination the most efficient extraction mode was investigated on natural contaminated samples. The method was validated for maize and wheat using a calibration range from 57 to 2300 μg/kg. Due to the ionic nature of the toxin the clean-up of the extracts was carried out with strong-anion-exchange columns. Moniliformin was separated by reversed phase ion-pair-chromatography (RP-Ion pair-HPLC) and detected by DAD. The validated method yielded recoveries of 76%±9% (maize) and 87%±5% (wheat) and detection limits of 39 μg/kg and 30 μg/kg, respectively. The suitability of the developed method was demonstrated on natural contaminated samples. Presented at the 25^th Mykotoxin Workshop in Giessen, Germany, May 19–21, 2003