Rational design of viscosity reducing mutants of a monoclonal antibody: Hydrophobic versus electrostatic inter-molecular interactions

High viscosity of monoclonal antibody formulations at concentrations ≥100 mg/mL can impede their development as products suitable for subcutaneous delivery. The effects of hydrophobic and electrostatic intermolecular interactions on the solution behavior of MAB 1, which becomes unacceptably viscous at high concentrations, was studied by testing 5 single point mutants. The mutations were designed to reduce viscosity by disrupting either an aggregation prone region (APR), which also participates in 2 hydrophobic surface patches, or a negatively charged surface patch in the variable region. The disruption of an APR that lies at the interface of light and heavy chain variable domains, V_H and V_L, via L45K mutation destabilized MAB 1 and abolished antigen binding. However, mutation at the preceding residue (V44K), which also lies in the same APR, increased apparent solubility and reduced viscosity of MAB 1 without sacrificing antigen binding or thermal stability. Neutralizing the negatively charged surface patch (E59Y) also increased apparent solubility and reduced viscosity of MAB 1, but charge reversal at the same position (E59K/R) caused destabilization, decreased solubility and led to difficulties in sample manipulation that precluded their viscosity measurements at high concentrations. Both V44K and E59Y mutations showed similar increase in apparent solubility. However, the viscosity profile of E59Y was considerably better than that of the V44K, providing evidence that inter-molecular interactions in MAB 1 are electrostatically driven. In conclusion, neutralizing negatively charged surface patches may be more beneficial toward reducing viscosity of highly concentrated antibody solutions than charge reversal or aggregation prone motif disruption.     

Electrostatic properties of cytochrome f: implications for docking with plastocyanin.

The electrostatic properties of cytochrome f (cyt f), a member of the cytochrome b6f complex and reaction partner with plastocyanin (PC) in photosynthetic electron transport, are qualitatively studied with the goal of determining the mechanism of electron transfer between cyt f and PC. A crystal structure for cyt f was analyzed with the software package GRASP, revealing a large region of positive potential generated by a patch of positively charged residues (including K58, K65, K66, K122, K185, K187, and R209) and reinforced by the iron center of the heme. This positive field attracts the negative charges of the two acidic patches on the mobile electron carrier PC. Three docked complexes are obtained for the two proteins, based on electrostatic or hydrophobic interactions or both and on steric fits by manual docking methods. The first of these three complexes shows strong electrostatic interactions between K187 on cyt f and D44 on PC and between E59 on PC and K58 on cyt f. Two other manually docked complexes are proposed, implicating H87 on PC as the electron-accepting site from the iron center of cyt f through Y1. The second complex maintains the D44/K187 cross-link (but not the E59/K58 link) while increasing hydrophobic interactions between PC and cyt f. Hydrophobic interactions are increased still further in the third complex, whereas the link between K187 on cyt f and D44 on PC is broken. The proposed reaction mechanism, therefore, involves an initial electrostatic docking complex that gives rise to a nonpolar attraction between the regions surrounding H87 on PC and Y1 on cyt f, providing for an electron-transfer active complex.     

Addition of negatively charged residues can reverse the decrease in the solubility of an acidic protein caused by an artificially introduced non-polar surface patch

A non-polar patch on the surface of a protein can cause a reduction in the solubility and stability of the protein, and thereby induce aggregation. However, a non-polar patch may be required so that the protein can bind to another molecule. The mutant 6L—derived from the acidic, dimeric α-helical protein sulerythrin and containing six additional leucines arranged to form a non-polar patch on its surface when properly folded—has a substantially reduced solubility in comparison with that of wild-type sulerythrin. This reduced solubility appears to cause 6L to aggregate. To reverse this aggregation, we mutated 6L so that it contained three to six additional glutamates or aspartates that we predicted would surround the non-polar leucine patch on natively folded 6L. Although the introduction of three glutamates or aspartates increased solubility, the mutants still aggregate and have a reduced α-helical content. Conversely, mutants with six additional glutamates or aspartates appear to exist mostly as dimers and to have the same α-helical content as that of wild-type sulerythrin. Notably, the introduction of five lysines or five arginines at the positions held by the glutamates or aspartates did not recover solubility as effectively as did the negatively charged residues. These results demonstrate that negatively charged residues, but not positively charged ones, surrounding a non-polar patch on an acidic protein can completely reverse the decrease in its solubility caused by the patch of non-polar surface residues.     

The role of hydrophobic and negatively charged surface patches of lipid-free apolipoprotein A-I in lipid binding and ABCA1-mediated cholesterol efflux

Recent models of lipid-free apolipoprotein A-I, including a cross-link/homology model and an X-ray crystal structure have identified two potential functionally relevant “patches” on the protein surface. The first is a hydrophobic surface patch composed of leucine residues 42, 44, 46, and 47 and the second a negatively charged patch composed of glutamic acid residues 179, 191, and 198. To determine if these domains play a functional role, these surface patches were disrupted by site-directed mutagenesis and the bacterially expressed mutants were compared with respect to their ability to bind lipid and stimulate ABCA1-mediated cholesterol efflux. It was found that neither patch plays a significant functional role in the ability of apoA-I to accept cholesterol in an ABCA1-dependent manner, but that the hydrophobic patch did affect the ability of apoA-I to clear DMPC liposomes. Interestingly, contrary to previous predictions, disruption of the hydrophobic surface patch enhanced the lipid binding ability of apoA-I. The hydrophobic surface patch may be important to the structural stability of lipid-free apoA-I or may be a necessary permissive structural element for lipid binding.     

Structure-based engineering of Alcaligenes xylosoxidans copper-containing nitrite reductase enhances intermolecular electron transfer reaction with pseudoazurin

The intermolecular electron transfer from Achromobacter cycloclastes pseudoazurin (AcPAZ) to wild-type and mutant Alcaligenes xylosoxidans nitrite reductases (AxNIRs) was investigated using steady-state kinetics and electrochemical methods. The affinity and the electron transfer reaction constant (k(ET)) are considerably lower between AcPAZ and AxNIR (K(m) = 1.34 mM and k(ET) = 0.87 x 10(5) M(-1) s(-1)) than between AcPAZ and its cognate nitrite reductase (AcNIR) (K(m) = 20 microM and k(ET) = 7.3 x 10(5) M(-1) s(-1)). A negatively charged hydrophobic patch, comprising seven acidic residues around the type 1 copper site in AcNIR, is the site of protein-protein interaction with a positively charged hydrophobic patch on AcPAZ. In AxNIR, four of the negatively charged residues (Glu-112, Glu-133, Glu-195, and Asp-199) are conserved at the corresponding positions of AcNIR, whereas the other three residues are not acidic amino acids but neutral amino acids (Ala-83, Ala-191, and Gly-198). Seven mutant AxNIRs with additional negatively charged residues surrounding the hydrophobic patch of AxNIR (A83D, A191E, G198E, A83D/A191E, A93D/G198E, A191E/G198E, and A83D/A191E/G198E) were prepared to enhance the specificity of the electron transport reaction between AcPAZ and AxNIR. The k(ET) values of these mutants become progressively larger as the number of mutated residues increases. The K(m) and k(ET) values of A83D/A191E/G198E (K(m) = 88 microM and k(ET) = 4.1 x 10(5) M(-1) s(-1)) are 15-fold smaller and 4.7-fold larger than those of wild-type AxNIR, respectively. These results suggest that the introduction of negatively charged residues into the docking surface of AxNIR facilitates both the formation of electron transport complex and the electron transfer reaction.     

Surface interactions in the complex between cytochrome f and the E43Q/D44N and E59K/E60Q plastocyanin double mutants as determined by 1H-NMR chemical shift analysis

A combination of site-directed mutagenesis and NMR chemical shift perturbation analysis of backbone and side-chain protons has been used to characterize the transient complex of the photosynthetic redox proteins plastocyanin and cytochrome f. To elucidate the importance of charged residues on complex formation, the complex of cytochrome f and E43Q/D44N or E59K/E60Q spinach plastocyanin double mutants was studied by full analysis of the (1)H chemical shifts by use of two-dimensional homonuclear NMR spectra. Both mutants show a significant overall decrease in chemical shift perturbations compared with wild-type plastocyanin, in agreement with a large decrease in binding affinity. Qualitatively, the E43Q/D44N mutant showed a similar interaction surface as wild-type plastocyanin. The interaction surface in the E59K/E60Q mutant was distinctly different from wild type. It is concluded that all four charged residues contribute to the affinity and that residues E59 and E60 have an additional role in fine tuning the orientation of the proteins in the complex.     

Improving protein extraction yield in reversed micellar systems through surface charge engineering

The mechanism of extraction of rat cytochrome b(5) from water into a sodium dioctylsulfosuccinate (AOT) micellar organic phase was studied using protein engineering of surface charged residues. The extraction behavior of native cytochrome b(5) and modified proteins with substitutions of the type glutamic acid --> lysine at positions 44 (E44K), 56 (E56K), and 92 (E92K), was studied as a function of pH. The results indicate that an important mechanism of extraction is an electrostatic interaction of this protein with the negatively charged surfactant. We demonstrate that it is possible to improve extraction by engineering the protein surface charge, increasing the driving force responsible for the protein transfer to the micellar phase. (c) 1994 John Wiley & Sons, Inc.     

Biophysics and Structure of the Patch and the Gigaseal

Interpreting channel behavior in patches requires an understanding of patch structure and dynamics, especially in studies of mechanosensitive channels. High resolution optical studies show that patch formation occurs via blebbing that disrupts normal membrane structure and redistributes in situ components including ion channels. There is a 1-2 μm region of the seal below the patch where proteins are excluded and this may consist of extracted lipids that form the gigaseal. Patch domes often have complex geometries with inhomogeneous stresses due to the membrane-glass adhesion energy (E_a), cytoskeletal forces, and possible lipid subdomains. The resting tension in the patch dome ranges from 1-4 mN/m, a significant fraction of the lytic tension of a bilayer (∼10 mN/m). Thus, all patch experiments are conducted under substantial, and uneven, resting tension that may alter the kinetics of many channels. E_a seems dominated by van der Waals attraction overlaid with a normally repulsive Coulombic force. High ionic strength pipette saline increased E_a and, surprisingly, increased cytoskeletal rigidity in cell-attached patches. Low pH pipette saline also increased E_a and reduced the seal selectivity for cations, presumably by neutralizing the membrane surface charge. The seal is a negatively charged, cation selective, space with a resistance of ∼7 gigohm/μm in 100 mM KCl, and the high resistivity of the space may result from the presence of high viscosity glycoproteins. Patches creep up the pipette over time with voltage independent and voltage dependent components. Voltage-independent creep is expected from the capillary attraction of E_a and the flow of fresh lipids from the cell. Voltage-dependent creep seems to arise from electroosmosis in the seal. Neutralization of negative charges on the seal membrane with low pH decreased the creep rate and reversed the direction of creep at positive pipette potentials.     

C-terminus determinants for Mg2+ and polyamine block of the inward rectifier K+ channel IRK1.

Critical loci for ion conduction in inward rectifier K+ channels are only now being discovered. The C-terminal region of IRK1 plays a crucial role in Mg2+i blockade and single-channel K+ conductance. A negatively charged aspartate in the putative second transmembrane domain (position 172) is essential for time-dependent block by the cytoplasmic polyamines spermine and spermidine. We have now localized the C-terminus effect in IRK1 to a single, negatively charged residue (E224). Mutation of E224 to G, Q and S drastically reduced rectification. Furthermore, the IRK1 E224G mutation decreased block by Mg2+i and spermidine and, like the E224Q mutation, caused a dramatic reduction in the apparent single-channel K+ conductance. The double mutation IRK1 D172N+ E224G was markedly insensitive to spermidine block, displaying an affinity similar to ROMK1. The results are compatible with a model in which the negatively charged residue at position 224, E224, is a major determinant of pore properties in IRK1. By means of a specific interaction with the negatively charged residue at position 172, D172, E224 contributes to the formation of the binding pocket for Mg2+ and polyamines, a characteristic of strong inward rectifiers.     

Effect of Lysine to Arginine Mutagenesis in the V3 Loop of HIV-1 gp120 on Viral Entry Efficiency and Neutralization

HIV-1 infection is characterized by an ongoing replication leading to T-lymphocyte decline which is paralleled by the switch from CCR5 to CXCR4 coreceptor usage. To predict coreceptor usage, several computer algorithms using gp120 V3 loop sequence data have been developed. In these algorithms an occupation of the V3 positions 11 and 25, by one of the amino acids lysine (K) or arginine (R), is an indicator for CXCR4 usage. Amino acids R and K dominate at these two positions, but can also be identified at positions 9 and 10. Generally, CXCR4-viruses possess V3 sequences, with an overall positive charge higher than the V3 sequences of R5-viruses. The net charge is calculated by subtracting the number of negatively charged amino acids (D, aspartic acid and E, glutamic acid) from the number of positively charged ones (K and R). In contrast to D and E, which are very similar in their polar and acidic properties, the characteristics of the R guanidinium group differ significantly from the K ammonium group. However, in coreceptor predictive computer algorithms R and K are both equally rated. The study was conducted to analyze differences in infectivity and coreceptor usage because of R-to-K mutations at the V3 positions 9, 10 and 11. V3 loop mutants with all possible RRR-to-KKK triplets were constructed and analyzed for coreceptor usage, infectivity and neutralization by SDF-1α and RANTES. Virus mutants R₉R₁₀R₁₁ showed the highest infectivity rates, and were inhibited more efficiently in contrast to the K₉K₁₀K₁₁ viruses. They also showed higher efficiency in a virus-gp120 paired infection assay. Especially V3 loop position 9 was relevant for a switch to higher infectivity when occupied by R. Thus, K-to-R exchanges play a role for enhanced viral entry efficiency and should therefore be considered when the viral phenotype is predicted based on V3 sequence data.     

Molecular determinants of inactivation within the I-II linker of alpha1E (CaV2.3) calcium channels

Voltage-dependent inactivation of CaV2.3 channels was investigated using point mutations in the beta-subunit-binding site (AID) of the I-II linker. The quintuple mutant alpha1E N381K + R384L + A385D + D388T + K389Q (NRADK-KLDTQ) inactivated like the wild-type alpha1E. In contrast, mutations of alpha1E at position R378 (position 5 of AID) into negatively charged residues Glu (E) or Asp (D) significantly slowed inactivation kinetics and shifted the voltage dependence of inactivation to more positive voltages. When co-injected with beta3, R378E inactivated with tau(inact) = 538 +/- 54 ms (n = 14) as compared with 74 +/- 4 ms (n = 21) for alpha1E (p < 0.001) with a mid-potential of inactivation E(0.5) = -44 +/- 2 mV (n = 10) for R378E as compared with E(0.5) = -64 +/- 3 mV (n = 9) for alpha1E. A series of mutations at position R378 suggest that positively charged residues could promote voltage-dependent inactivation. R378K behaved like the wild-type alpha1E whereas R378Q displayed intermediate inactivation kinetics. The reverse mutation E462R in the L-type alpha1C (CaV1.2) produced channels with inactivation properties comparable to alpha1E R378E. Hence, position 5 of the AID motif in the I-II linker could play a significant role in the inactivation of Ca(V)1.2 and CaV2.3 channels.     

A point mutation in domain 4-segment 6 of the skeletal muscle sodium channel produces an atypical inactivation state

We compared wild-type rat skeletal muscle NaChs (micro1) and a mutant NaCh (Y1586K) that has a single amino acid substitution, lysine (K) for tyrosine (Y), at position 1586 in the S6 transmembrane segment of domain 4. In Y1586K, macroscopic current decay is faster, the V(1/2) of the activation curve is shifted in the depolarized direction, and the fast-inactivation curve is less steep compared with mu1. After an 8-ms depolarization pulse, Y1586K recovers from inactivation much more slowly than mu1. The recovery is double exponential, suggesting recovery from two inactivation states. Varying the depolarization protocols isolates entry into an additional, "atypical" inactivation state in Y1586K that is distinct from typical fast or slow inactivation. Substitution of positively charged arginine (R) at Y1586 produces an inactivation phenotype similar to that of Y1586K. Substitution by negatively charged aspartic acid (D) or uncharged alanine (A) at Y1586 produces an inactivation phenotype similar to mu1. Our results suggest that the positive charge of lysine (K) produces the atypical inactivation state in Y1586K. We propose that a conformational change during depolarization alters the relative position of the 1586K residue in the D4-S6 segment and that atypical inactivation in Y1586K occurs via an electrostatic interaction in or near the inner pore region.     

Effects of phospholipid surface charge on ion conduction in the K+ channel of sarcoplasmic reticulum.

Single-channel K+ currents through sarcoplasmic reticulum K+ channels were compared after reconstitution into planar bilayers formed from neutral or negatively charged phospholipids. In neutral bilayers, the channel conductance saturates with K+ concentration according to a rectangular hyperbola, with half-saturation at 40 mM K+, and maximum conductance of 220 pS. In negatively charged bilayers (70% phosphatidylserine/30% phosphatidylethanolamine), the conductance is, at a given K+ concentration, higher than in neutral bilayers. This effect of negative surface charge is increasingly pronounced at lower ionic strength. The maximum conductance at high K+ approaches 220 pS in negative bilayers, and the channel's ionic selectivity is unaffected by lipid charge. The divalent channel blocker " bisQ11 " causes discrete blocking events in both neutral and negatively charged bilayers; the apparent rate constant of blocking is sensitive to surface charge, while the unblocking rate is largely unaffected. Bilayers containing a positively charged phosphatidylcholine analogue led to K+ conductances lower than those seen in neutral bilayers. The results are consistent with a simple mechanism in which the local K+ concentration sensed by the channel's entryway is determined by both the bulk K+ concentration and the bulk lipid surface potential, as given by the Gouy-Chapman model of the electrified interface. To be described by this approach, the channel's entryway must be assumed to be located 1-2 nm away from the lipid surface, on both sides of the membrane.     

Altering substrate specificity of phosphatidylcholine-preferring phospholipase C of Bacillus cereus by random mutagenesis of the headgroup binding site

PLC(Bc) is a 28.5 kDa monomeric enzyme that catalyzes the hydrolysis of the phosphodiester bond of phosphatidylcholine, phosphatidylethanolamine, and phosphatidylserine to provide a diacylglycerol and the corresponding phosphorylated headgroup. Because single replacements of Glu4, Tyr56, and Phe66 in the headgroup binding pocket led to changes in substrate specificity [Martin et al. (2000) Biochemistry 39, 3410-3415], a combinatorial library of approximately 6000 maltose binding protein-PLC(Bc) fusion protein mutants containing random permutations of these three residues was generated to identify PLC(Bc) mutants with altered specificity profiles and high catalytic activities. Members of this library were screened for hydrolytic activity toward the water soluble substrates C6PC, C6PE, and C6PS using a novel protocol that was conducted in a 96-well format and featured the in situ cleavage of the fusion protein to release the mutant PLC(Bc)s. Ten mutant enzymes that exhibited significant preferences toward C6PE or C6PS were selected and analyzed by steady-state kinetics to determine their specificity constants, k(cat)/K(M). The C6PS selective clones E4G, E4Q/Y56T/F66Y, and E4K/Y56V exhibited higher specificity constants toward C6PS than wt, whereas Y56T, F66Y, and Y56T/F66Y were C6PE selective and had comparable or higher specificity constants than wt for C6PE. The corresponding wt residues were singly reinserted back into the E4Q/Y56T/F66Y and E4K/Y56V mutants via site-directed mutagenesis, and the E4Q/F66Y mutant thus obtained exhibited a 10-fold higher specificity constant toward C6PS than wt, a value significantly higher than other PLC(Bc) mutants. On the basis of available data, an aromatic residue at position 66 appears important for significant catalytic activity toward all three substrates, especially C6PC and C6PE. The charge of residue 4 also appears to be a determinant of enzyme specificity as a negatively charged residue at this position endows the enzyme with C6PC and C6PE preference, whereas a polar neutral or positively charged residue results in C6PS selectivity. Replacing Tyr56 with Val, Ala, Thr, or Ser greatly reduces activity toward C6PC. Thus, the substrate specificity of PLC(Bc) can be modulated by varying three of the amino acid residues that constitute the headgroup binding pocket, and it is now apparent that this enzyme is not evolutionarily optimized to hydrolyze phospholipids with ethanolamine or serine headgroups.     

Mechanism of Membrane Permeation Induced by Synthetic β-Hairpin Peptides

We have investigated the membrane destabilizing properties of synthetic amphiphilic cationic peptides, MAX1 and MAX35, which have the propensity to form β-hairpin structures under certain conditions, and a control non-β-hairpin-forming peptide MAX8V16E. All three peptides bind to liposomes containing a mixture of zwitterionic POPC and negatively charged POPS lipids as determined by Zeta potential measurements. Circular dichroism measurements indicated folding of MAX1 and MAX35 in the presence of the POPC/POPS liposomes, whereas no such folding was observed with MAX8V16E. There was no binding or folding of these peptides to liposomes containing only POPC. MAX1 and MAX35 induced release of contents from negatively charged liposomes, whereas MAX8V16E failed to promote solute release under identical conditions. Thus, MAX1 and MAX35 bind to, and fold at the surface of negatively charged liposomes adopting a lytic conformation. We ruled out leaky fusion as a mechanism of release by including 2 mol % PEG-PE in the liposomes, which inhibits aggregation/fusion but not folding of MAX or MAX-induced leakage. Using a concentration-dependent quenching probe (calcein), we determined that MAX-induced leakage of liposome contents was an all-or-none process. At MAX1 concentrations, which cause release of ∼50% of the liposomes that contain small (R_h <1.5 nm) markers, only ∼15% of those liposomes release a fluorescent dextran of 40 kDa. A multimeric model of the pore is presented based on these results. Atomistic molecular dynamics simulations show that barrels consisting of 10 β-hairpin MAX1 and MAX35 peptides are relatively more stable than MAX8V16E barrels in the bilayer, suggesting that barrels of this size are responsible for the peptides lytic action.     

Homology modeling of the three membrane proteins of the dhurrin metabolon: catalytic sites, membrane surface association and protein-protein interactions

Formation of metabolons (macromolecular enzyme complexes) facilitates the channelling of substrates in biosynthetic pathways. Metabolon formation is a dynamic process in which transient structures mediated by weak protein-protein interactions are formed. In Sorghum, the cyanogenic glucoside dhurrin is derived from l-tyrosine in a pathway involving the two cytochromes P450 (CYPs) CYP79A1 and CYP71E1, a glucosyltransferase (UGT85B1), and the redox partner NADPH-dependent cytochrome P450 reductase (CPR). Experimental evidence suggests that the enzymes of this pathway form a metabolon. Homology modeling of the three membrane bound proteins was carried out using the Sybyl software and available relevant crystal structures. Residues involved in tight positioning of the substrates and intermediates in the active sites of CYP79A1 and CYP71E1 were identified. In both CYPs, hydrophobic surface domains close to the N-terminal trans-membrane anchor and between the F′ and G helices were identified as involved in membrane anchoring. The proximal surface of both CYPs showed positively charged patches complementary to a negatively charged bulge on CPR carrying the FMN domain. A patch of surface exposed, positively charged amino acid residues positioned on the opposite face of the membrane anchor was identified in CYP71E1 and might be involved in binding UGT85B1 via a hypervariable negatively charged loop in this protein.     

Mechanism of Membrane Permeation Induced by Synthetic β-Hairpin Peptides

We have investigated the membrane destabilizing properties of synthetic amphiphilic cationic peptides, MAX1 and MAX35, which have the propensity to form β-hairpin structures under certain conditions, and a control non-β-hairpin-forming peptide MAX8V16E. All three peptides bind to liposomes containing a mixture of zwitterionic POPC and negatively charged POPS lipids as determined by Zeta potential measurements. Circular dichroism measurements indicated folding of MAX1 and MAX35 in the presence of the POPC/POPS liposomes, whereas no such folding was observed with MAX8V16E. There was no binding or folding of these peptides to liposomes containing only POPC. MAX1 and MAX35 induced release of contents from negatively charged liposomes, whereas MAX8V16E failed to promote solute release under identical conditions. Thus, MAX1 and MAX35 bind to, and fold at the surface of negatively charged liposomes adopting a lytic conformation. We ruled out leaky fusion as a mechanism of release by including 2 mol % PEG-PE in the liposomes, which inhibits aggregation/fusion but not folding of MAX or MAX-induced leakage. Using a concentration-dependent quenching probe (calcein), we determined that MAX-induced leakage of liposome contents was an all-or-none process. At MAX1 concentrations, which cause release of ∼50% of the liposomes that contain small (R_h <1.5 nm) markers, only ∼15% of those liposomes release a fluorescent dextran of 40 kDa. A multimeric model of the pore is presented based on these results. Atomistic molecular dynamics simulations show that barrels consisting of 10 β-hairpin MAX1 and MAX35 peptides are relatively more stable than MAX8V16E barrels in the bilayer, suggesting that barrels of this size are responsible for the peptides lytic action.     

Charge conversion enables quantification of the proximity between a normally-neutral mu-conotoxin (GIIIA) site and the Na+ channel pore

mu-Conotoxin (mu-CTX) inhibits Na+ flux by obstructing the Na+ channel pore. Previous studies of mu-CTX have focused only on charged toxin residues, ignoring the neutral sites. Here we investigated the proximity between the C-terminal neutral alanine (A22) of mu-CTX and the Na+ channel pore by replacing it with the negatively charged glutamate. The analog A22E and wild-type (WT) mu-CTX exhibited identical nuclear magnetic resonance spectra except at the site of replacement, verifying that they have identical backbone structures. A22E significantly reduced mu-CTX affinity for WT mu1 Na+ channels (90-fold), as if the inserted glutamate repels the anionic pore receptor. We then looked for the interacting partner(s) of residue 22 by determining the potency of block of Y401K, Y401A, E758Q, D762K, D762A, E765K, E765A and D1241K channels by WT mu-CTX and A22E, followed by mutant cycle analysis to assess their individual couplings. Our results show that A22E interacts strongly with E765K from domain II (DII) (deltadeltaG=2.2 +/- 0.1 vs. <1 kcal/mol for others). We conclude that mu-CTX residue 22 closely associates with the DII pore in the toxin-bound channel complex. The approach taken may be further exploited to study the proximity of other neutral toxin residues with the Na+ channel pore.     

The influence of a surface charge on the electronic and steric structure of a high potential iron-sulfur protein

The recombinant high-potential iron-sulfur protein (HiPIP) iso-I from Ectothiorhodospira halophila has been mutated at position 68. The αC of Val 68 is within a 0.6-nm sphere from the closest iron ion of the cluster. The valine residue has been replaced by a negatively charged glutamate residue (V68E) and by a positively charged lysine residue (V68K). With respect to the recombinant wild-type protein the reduction potentials of the V68E and V68K variants are –21±2 and +29±2?mV respectively (200?mM NaCl, pH?7, 25??°C). The solution structure of the V68E mutant was solved up to a pairwise RMSD of 66?pm for backbone atoms and 138?pm for all heavy atoms. The structure of the variant is very similar to that of recombinant wild type, indicating that the observed changes in reduction potentials are largely due to the effect of the introduced charges. It is proposed that the valence distribution within the oxidized iron-sulfur cluster is affected only slightly by the change in charge at position 68, but consistently with a simple electrostatic model.