Imidazolium chloride‐based ionic liquid‐assisted improvement of lipase activity in organic solvents

The activity of a lipase from a newly isolated Pseudomonas sp. was investigated in the presence of organic solvents and imidazolium chloride‐based ionic liquids (IL) such as BMIM[Cl] and HMIM[Cl]. The lipase activity in the presence of IL was higher compared to that in common organic solvents such as methanol and 2‐propanol. A possible explanation for the enzyme activation might be the structural changes induced in the protein in organic systems. Since IL quench the intensity of fluorescence emission, it was not possible to investigate the major factor that influences the enzyme behavior in these new organic salts. Furthermore, the enzyme exhibited excellent activity in buffer mixtures containing both organic solvent and IL. The stability of the lipase at 50°C was considerably increased in the presence of 20% BMIM[Cl] compared with the untreated lipase in aqueous medium. The light scattering method clearly showed that prevention of aggregation could be the reason for thermal stabilization at 50°C in reactions containing IL. Kinetic analysis of the enzyme in the presence of different concentrations of IL showed that the K_m value increased from 0.45 mM in aqueous buffer to 2.4 mM in 50% v/v BMIM[Cl]/buffer. The increase in K_m indicates that IL can significantly reduce the binding affinity of the substrate to the enzyme. Also, a linear correlation was observed between the BMIM[Cl] concentration and V_max of the enzyme. As the concentration of BMIM[Cl] increased from 10 to 50% v/v, the V_max value increased from 1.8 to 46 μM/min.     

Biodiesel synthesis and conformation of lipase from Burkholderia cepacia in room temperature ionic liquids and organic solvents

Biodiesel synthesis and conformation of Burkholderia cepacia lipase (BCL) were studied in 19 different room temperature ionic liquids (RTLLs) with a range of cation and anion structures. Overall, anion selection had a greater influence on biodiesel conversion than cation choice. RTILs containing Tf2N- and PF6- anions were suitable reaction media, while RTIL of [OmPy][BF4] was the best reaction medium with a biodiesel yield of 82.2±1.2%. RTILs with strong water miscible properties showed very low biodiesel yields. Conformational analysis by FT-IR revealed that higher biodiesel conversion in RTILs was correlated with a low tendency in α-helix content of BCL. An ultrasound-assisted biocatalysis process in RTILs was used to improve mass transfer rate, leading to 83% reduction of the reaction time for biodiesel production.     

Statistical medium optimization and production of a hyperthermostable lipase from Burkholderia cepacia in a bioreactor

AIM: Statistical medium optimization for maximum production of a hyperthermostable lipase from Burkholderia cepacia and its validation in a bioreactor. METHODS AND RESULTS: Burkholderia cepacia was grown in shake flasks containing 1% glucose, 0.1% KH2PO4, 0.5% NH4Cl, 0.24% (NH4)2HPO4, 0.01% MgSO4.7H2O and 1% emulsified palm oil, at 45 degrees C and pH 7.0, agitated at 250 rev min(-1) with 6-h-old inoculum (2% v/v) for 20 h. A fourfold enhancement in lipase production (50 U ml(-1)) and an approximately three fold increase in specific activity (160 U mg(-1)) by B. cepacia was obtained in a 14 litre bioreactor within 15 h after statistical optimization following shake flask culture. The statistical model was obtained using face centred central composite design (FCCCD) with five variables: glucose, palm oil, incubation time, inoculum density and agitation. The model suggested no interactive effect of the five factors, although incubation period, inoculum and carbon concentration were the important variables. CONCLUSIONS: The maximum lipase production was 50 U ml(-1), with specific activity 160 U mg(-1) protein, in a 14 litre bioreactor after 15 h in a medium obtained after statistical optimization in shake flasks. Further, the model predicted reduction in time for lipase production with reduction in total carbon supply. SIGNIFICANCE AND IMPACT OF THE STUDY: Statistical optimization allows quick optimization of a large number of variables. It also provides a deep insight into the regulatory role of various parameters involved in enzyme production.     

Activity enhancement and stabilization of lipase from Pseudomonas cepacia in polyallylamine-mediated biomimetic silica

Triacylglycerol lipase from Pseudomonas cepacia and Fe(3)O(4) magnetic nanoparticles were encapsulated simultaneously within biomimetic silica through the catalysis of polyallylamine. The encapsulation efficiency reached 96% with an activity recovery of 51%. After 5 h at 37°C, the activities of the free and encapsulated lipases decreased by 77 and 16%, respectively. Addition of 10 and 15 mol% trimethylmethoxysilane to tetramethoxysilane during encapsulation doubled the lipase activity while inclusion of 50 and 60 mol% γ-(methacryloxypropyl)-trimethoxysilane tripled the activity. Thus, such encapsulation not only stabilized P. cepacia lipase but also could enhance the activity by varying silane additives.     

Molecular dynamics investigation of the ionic liquid/enzyme interface: Application to engineering enzyme surface charge

Molecular simulations of the enzymes Candida rugosa lipase and Bos taurus α‐chymotrypsin in aqueous ionic liquids 1‐butyl‐3‐methylimidazolium chloride and 1‐ethyl‐3‐methylimidazolium ethyl sulfate were used to study the change in enzyme–solvent interactions induced by modification of the enzyme surface charge. The enzymes were altered by randomly mutating lysine surface residues to glutamate, effectively decreasing the net surface charge by two for each mutation. These mutations resemble succinylation of the enzyme by chemical modification, which has been shown to enhance the stability of both enzymes in ILs. After establishing that the enzymes were stable on the simulated time scales, we focused the analysis on the organization of the ionic liquid substituents about the enzyme surface. Calculated solvent charge densities show that for both enzymes and in both solvents that changing positively charged residues to negative charge does indeed increase the charge density of the solvent near the enzyme surface. The radial distribution of IL constituents with respect to the enzyme reveals decreased interactions with the anion are prevalent in the modified systems when compared to the wild type, which is largely accompanied by an increase in cation contact. Additionally, the radial dependence of the charge density and ion distribution indicates that the effect of altering enzyme charge is confined to short range (≤1 nm) ordering of the IL. Ultimately, these results, which are consistent with that from prior experiments, provide molecular insight into the effect of enzyme surface charge on enzyme stability in ILs. Proteins 2015; 83:670–680. © 2015 Wiley Periodicals, Inc.     

Gelatin blends with alginate: gels for lipase immobilization and purification

Blends of natural polysaccharide sodium alginate (5%) with gelatin (3%) cross-linked with glutaraldehyde provide beads with excellent compressive strength (8 x 10(4) Pa) and regular structure on treatment with calcium chloride. Lipases from porcine pancreas, Pseudomonas cepacia, and Candida rugosa were immobilized in such a blend with excellent efficiency. The immobilized enzymes were stable and were reused several times without significant loss of enzyme activity both in aqueous and reverse micellar media. The beads were functionalized with succinic anhydride to obtain beads with extra carboxylic acid groups. These functionalized beads were then successfully used for 7.4-fold purification of crude porcine pancreatic lipase in a simple operation of protein binding at pH 5 and release at pH 8.5.     

Covalent-bonded immobilization of lipase on poly(phenylene sulfide) dendrimers and their hydrolysis ability

Covalent-bonded immobilization of lipase from burkholderia cepacia onto two poly(phenylene sulfide) (PPS) dendrimers with different generations (two and three) was achieved using carbodiimide as a coupling reagent. The hydrolysis activity of olive oil to fatty acid was studied on enzyme-immobilized PPS dendrimers. Enzyme activity was proportional to the enzyme loading, and highest recovered activity was obtained at the medium enzyme loading for both G2 and G3 dendrimers. The immobilization improved the optimum pH and caused the temperature range to widen. Immobilization of enzyme has enhanced the thermal stability of enzyme activity in comparison with free enzyme. The immobilized enzyme as a biocatalyst for batch hydrolysis of olive oil retained 80 approximately 90% activity even after 20 times of recycling. This retention of activity after recycle is very valuable and powerful in enzyme technology. The present noteworthy and vital availability on enzyme reaction of the covalently bonded immobilized lipase on dendrimer came from the structure of dendrimer with a large number of functional terminal groups, which are easily available for immobilization of many lipases at the situation keeping reactive enzymes on the surface of dendrimer.     

Over-stabilization of Candida antarctica lipase B by ionic liquids in ester synthesis

Four different ionic liquids, based on dialkylimidazolium cations associated with perfluorinated and bis(trifluoromethyl)sulfonyl amide anions were used as reaction media for butyl butyrate synthesis catalyzed by free Candida antarctica lipase B at 2% (v/v) water content and 50 °C. Lipase had enhanced synthetic activity in all ionic liquids in comparison with two organic solvents (hexane, and 1-butanol), the enhanced activity being related to the increase in polarity of ionic liquids. The continuous operation of lipase with all the assayed ionic liquids showed over-stabilization of the enzyme. The reuse of free lipase in 1-butyl-3-methylimidazolium hexafluorophosphate in continuous operation cycles showed a half-life time 2300 times greater than that observed when the enzyme was incubated in the absence of substrate (3.2 h), and a selectivity higher than 90%.     

Aqueous biphasic systems composed of ionic liquids and sodium carbonate as enhanced routes for the extraction of tetracycline

Aqueous biphasic systems (ABS) using ionic liquids (ILs) offer an alternative approach for the extraction, recovery, and purification of biomolecules through their partitioning between two aqueous liquid phases. In this work, the ability of a wide range of ILs to form ABS with aqueous solutions of Na₂CO₃ was evaluated. The ABS formed by IL + water + Na₂CO₃ were determined at 25°C, and the respective solubility curves, tie‐lines, and tie‐line lengths are reported. The studied ILs share the common chloride anion, allowing the IL cation core, the cation isomerism, the presence of functionalized groups, and alkyl side chain length effects to be evaluated. An increase in the cation side alkyl chain length leads to a higher ability for liquid–liquid demixing whereas different positional isomers and the presence of an allyl group have no major influence in the phase diagrams behavior. Quaternary phosphonium‐ and ammonium‐based fluids are more able to form an ABS when compared with imidazolium‐, pyridinium‐, pyrrolidinium‐, and piperidium‐based ILs. Moreover, the presence of an aromatic cation core has no major contribution to the formation of ABS when compared to the respective nonaromatic counterparts. Finally, to appraise on the systems applicability in downstream processing, selected systems were used for the partitioning of tetracyclines (neutral and salt forms) — a class of antibiotics produced by bacteria fermentation. Single‐step extraction efficiencies for the IL‐rich phase were always higher than 99% and confirm the great potential of ILs to be applied in the biotechnological field. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:645–654, 2013     

The effect of cultural conditions on the production of lipase by Acremonium strictum

Summary The optimum cultural conditions for the production of lipase byA. strictum under stationary condition are: period of incubation, 7 days; temperature, 30°C; xylose at a concentration of 2% (w/v) and 3.5% (w/v) soyabean meal as carbon and nitrogen sources respectively. Incorporation of 1% (v/v) of Tween 80 in culture medium enhanced enzyme production while the presence of fatty acids reduced both fungal growth and lipase production. The enzyme showed broad substrate specificity.     

Preparation of gemini-type amphiphiles bearing cyclitol head groups and their application as high-performance modifiers for lipases

Five gemini-type amphiphiles bearing cyclitol head groups, which have abundance of axial hydroxy groups, are newly synthesized. The syntheses are based on a common mixed anhydride method utilizing N,N'-[iminobis(trimethylene)]bisquinamide, prepared from iminobispropylamine and quino-1,5-lactone, and dialkyl N-(3-carboxypropanoyl)-L-glutamates as polar and hydrophobic components, respectively. Candida rugosa lipase (CRL) and Pseudomonas cepacia lipase (PCL) are co-lyophilized with these synthesized gemini-type amphiphiles, and their transesterification activities in organic solvents are evaluated. The modified PCL and CRL prepared by using each amphiphile showed highly enhanced and moderately enhanced enzyme activity, respectively. These results are discussed in terms of the increased preferential exclusion of the hydrophilic heads of the amphiphile and of the topological view of the amphiphile.     

Ability of T1 Lipase to Degrade Amorphous P(3HB): Structural and Functional Study

An enzyme with broad substrate specificity would be an asset for industrial application. T1 lipase apparently has the same active site residues as polyhydroxyalkanoates (PHA) depolymerase. Sequences of both enzymes were studied and compared, and a conserved lipase box pentapeptide region around the nucleophilic serine was detected. The alignment of 3-D structures for both enzymes showed their active site residues were well aligned with an RMSD value of 1.981 Å despite their sequence similarity of only 53.8%. Docking of T1 lipase with P(3HB) gave forth high binding energy of 5.4 kcal/mol, with the distance of 4.05 Å between serine hydroxyl (OH) group of TI lipase to the carbonyl carbon of the substrate, similar to the native PhaZ7 _Pl . This suggests the possible ability of T1 lipase to bind P(3HB) in its active site. The ability of T1 lipase in degrading amorphous P(3HB) was investigated on 0.2% (w/v) P(3HB) plate. Halo zone was observed around the colony containing the enzyme which confirms that T1 lipase is indeed able to degrade amorphous P(3HB). Results obtained in this study highlight the fact that T1 lipase is a versatile hydrolase enzyme which does not only record triglyceride degradation activity but amorphous P(3HB) degradation activity as well.     

Complex of Burkholderia cepacia lipase with transition state analogue of 1-phenoxy-2-acetoxybutane: biocatalytic, structural and modelling study.

In a series of four racemic phenoxyalkyl-alkyl carbinols, 1-phenoxy-2-hydroxybutane (1) is enantioselectively acetylated by Burkholderia cepacia (formerly Pseudomonas cepacia) lipase with an E value > or = 200, whereas for the other three racemates E was found to be < or = 4. To explain the high preference of B. cepacia lipase for (R)-(+)-1, a precursor of its transition state analogue with a tetrahedral P-atom, (R(P),S(P))-O-(2R)-(1-phenoxybut-2-yl)methylphosphonic acid chloride was prepared and crystallized in complex with B. cepacia lipase. The X-ray structure of the complex was determined, allowing to compare the conformation of the inhibitor with results of molecular modelling.     

Crosslinking of enzyme coaggregate with polyethyleneimine: A simple and promising method for preparing stable biocatalyst of Serratia marcescens lipase

Crosslinking of enzyme aggregates is a promising method for enzyme immobilization. In this work, crosslinked enzyme coaggregates of Serratia marcescens lipase with polyethyleneimine (CLECAs-SML-PEI) were prepared using polyethyleneimine (PEI) as coprecipitant and glutaraldehyde as crosslinking reagent. The crude lipase solution at a low protein concentration (0.1 mg/ml), with PEI at a mass ratio of 3:1 (PEI/protein, w/w), was found to be most adequate for the coprecipitation of SML. After crosslinking of the coaggregate of SML-PEI with 0.2% (w/v) glutaraldehyde under ambient temperature, over 70% of the total lipase activity was recovered. Compared with the free SML, the optimum temperature of the CLECAs-SML-PEI was enhanced from 50 °C to 60 °C and its thermal stability was also significantly improved. CLECAs-SML-PEI showed excellent operational stability in repeated use in aqueous–toluene biphasic system for asymmetric hydrolysis of trans-3-(4′-methoxyphenyl)glycidic acid methyl ester (MPGM), without significant inactivation after 10 rounds of repeated use.     

Purification and properties of a novel extra-cellular thermotolerant metallolipase of Bacillus coagulans MTCC-6375 isolate

A novel extra-cellular lipase from Bacillus coagulans MTCC-6375 was purified 76.4-fold by DEAE anion exchange and Octyl Sepharose chromatography. The purified enzyme was found to be electrophoretically pure by denaturing gel electrophoresis and possessed a molecular mass of approximately 103 kDa. The lipase was optimally active at 45 degrees C and retained approximately 50% of its original activity after 20 min of incubation at 55 degrees C. The enzyme was optimally active at pH 8.5. Mg2+, Cu2+, Ca2+, Hg2+, Al3+, and Fe3+ at 1mM enhanced hydrolytic activity of the lipase. Interestingly, Hg2+ ions resulted in a maximal increase in lipase activity but Zn2+ and Co2+ ions showed an antagonistic effect on this enzyme. EDTA at 150 mM concentration inhibited the activity of lipase but Hg2+ or Al3+ (10mM) restored most of the activity of EDTA-quenched lipase. Phenyl methyl sulfonyl fluoride (PMSF, 15 mM) decreased 98% of original activity of lipase. The lipase was more specific to p-nitrophenyl esters of 8 (pNPC) and 16 (pNPP) carbon chain length esters. The lipase had a Vmax and Km of 0.44 mmol mg(-1)min(-1) and 28 mM for hydrolysis of pNPP, and 0.7 mmol mg(-1)min(-1) and 32 mM for hydrolysis of pNPC, respectively.     

洋葱假单胞菌(Pseudomonas cepacia)PCL-3产脂肪酶发酵条件研究

研究了洋葱假单胞菌(Pseudomonas cepacia) PCL-3发酵产碱性脂肪酶培养条件的优化。采用单因子试验筛选出糊精为最适碳源,蛋白胨和尿素为复合氮源。通过Plackett-Burman设计试验,对影响产酶条件的8个相关因子进行评估并筛选出具有显著效应的三个因子：尿素、接种量以及初始pH值。用最陡爬坡实验逼近显著因子的最大响应区域后,采用响应面分析法,确定尿素、接种量以及初始pH值最优值分别为0.15％,3.05%和8.59。优化后液体发酵培养基中脂肪酶活力提高到48.88 U/mL,比初始酶活25.37U/ml提高了1.93倍。10 L 的发酵罐中,脂肪酶活力在52h达到最大,为47.69U/mL。     

Optimizing lipase activity, enantioselectivity, and stability with medium engineering and immobilization for beta-blocker synthesis.

Lipase from Pseudomonas cepacia showed poor activity and moderate enantioselectivity (E) in pure aqueous systems for hydrolysis of a racemic mixture (+/-)-1-chloro-2-acetoxy-3-(1-naphthyloxy)-propane, which is a potential intermediate for beta-blocker synthesis. However, addition of polar organic solvents to the reaction can change both the activity and the enantioselectivity for this chiral reaction significantly. It was observed, in general, that the activity increases and the enantioselectivity decreases with the increase in the polarity of the organic solvent added to the medium. Among the six solvents chosen (i.e., dimethylsulfoxide [DMSO], 1, 4-dioxane, dimethylformamide [DMF], acetone, 1-propanol, and tetrahydrofuran [THF]), maximum activity and minimum enantioselectivity was obtained with DMSO, whereas minimum activity and maximum enantioselectivity was obtained with THF as the cosolvents. In the subsequent studies, native or polyethylene glycol (PEG)-modified lipase was immobilized by entrapping in Caalginate gel beads. In a fixed-bed continuous reactor containing these catalyst beads, the enzyme was found to be at least three times more enantioselective than the native form in a batch reactor. This fixed-bed reactor with the beads could be operated with high concentration of acetone (33% v/v) for about 1 month without a significant loss of enzyme activity and enantioselectivity.     

Improved activity and stability of Rhizopus oryzae lipase via immobilization for citronellol ester synthesis in supercritical carbon dioxide

In present work, Rhizopus oryzae lipase immobilized on a film prepared using blend of hydroxylpropyl methyl cellulose (HPMC) and polyvinyl alcohol (PVA) was investigated for synthesis of citronellol esters with supercritical carbon dioxide (Sc-CO₂) as a reaction medium. The transesterification reaction was optimized for various reaction parameters like effect of molar ratio, acyl donor, time, temperature, enzyme concentration, effect of pressure and co-solvent to achieve the maximum yield of desired product. The results obtained signify remarkable increment (about eightfold) in the yield of citronellol acetate (91%) as compared to that of free lipase (11%) in Sc-CO₂. The developed biocatalytic methodology provides a substantial advantage of low biocatalyst loading (1.5%, w/v), lower reaction temperature (45 °C) and lower pressure (8 MPa) as compared to previous reports. The immobilization method has significantly enhanced the operational stability of lipase for ester synthesis under Sc-CO₂ conditions. The developed methodology was successfully applied for synthesis of three different industrially important citronellol esters namely citronellol acetate (91%), citronellol butyrate (98%), citronellol laurate (99%) with excellent yields using vinyl esters as acyl donor under Sc-CO₂ conditions. In addition, the immobilized biocatalyst was effectively recycled for three consecutive recycles.     

Stabilization of alpha-chymotrypsin by ionic liquids in transesterification reactions.

Five different ionic liquids, based on dialkylimidazolium and quaternary ammonium cations associated with perfluorinated and bis (trifluoromethyl) sulfonyl amide anions, were used as reaction media to synthesize N-acetyl-L-tyrosine propyl ester by transesterification with alpha-chymotrypsin at 2% (v/v) water content at 50 degrees C. The synthetic activity was reduced by the increase in alkyl chains length of cations and by increases in anion size, which was related to the decrease in polarity. Incubation of the enzyme (with and without substrate) in ionic liquids exhibited first-order deactivation kinetics at 50 degrees C, allowing determination of deactivation rate constants and half-life times (1-3 h). Ionic liquids showed a clear relative stabilization effect on the enzyme, which was improved by increased chain length of the alkyl substituents on the imidazolium ring cations and the anion size. This effect was 10-times enhanced by the presence of substrate. For example, 1-butyl-3-methylimidazolium hexafluorophosphate increased the alpha-chymotrypsin half-life by 200 times in the presence of substrate with respect to the 1-propanol medium. These results show that ionic liquids are excellent enzyme-stabilizing agents and reaction media for clean biocatalysis in non-conventional conditions.     

Immobilization and characterization of lipase from an indigenous Bacillus aryabhattai SE3-PB isolated from lipid-rich wastewater

Abstract

Extracellular lipase from an indigenous Bacillus aryabhattai SE3-PB was immobilized in alginate beads by entrapment method. After optimization of immobilization conditions, maximum immobilization efficiencies of 77%?±?1.53% and 75.99%?±?3.49% were recorded at optimum concentrations of 2% (w/v) sodium alginate and 0.2?M calcium chloride, respectively, for the entrapped enzyme. Biochemical properties of both free and immobilized lipase revealed no change in the optimum temperature and pH of both enzyme preparations, with maximum activity attained at 60?°C and 9.5, respectively. In comparison to free lipase, the immobilized enzyme exhibited improved stability over the studied pH range (8.5–9.5) and temperature (55–65?°C) when incubated for 3?h. Furthermore, the immobilized lipase showed enhanced enzyme-substrate affinity and higher catalytic efficiency when compared to soluble enzyme. The entrapped enzyme was also found to be more stable, retaining 61.51% and 49.44% of its original activity after being stored for 30 days at 4?°C and 25?°C, respectively. In addition, the insolubilized enzyme exhibited good reusability with 18.46% relative activity after being repeatedly used for six times. These findings suggest the efficient and sustainable use of the developed immobilized lipase for various biotechnological applications.