Fibrinogen: a preliminary analysis of the amino acid sequences of the portion of the alpha, beta and gamma-chains postulated to form the interdomainal link between globular regions of the molecule

It has been suggested (Doolittle et al., 1977) that portions of the α-, β- and γ-chains of fibrinogen form a coiled-coil rope of α-helices and that this rope connects globular domains of the molecule. A fast Fourier transform analysis of the relevant amino acid sequences has shown that there is a significant 3.5-residue period in the linear disposition of the apolar residues in all three chains. This periodicity is characteristic of amino acid sequences of α-fibrous proteins, such as α-tropomyosin and α-keratin, where the tertiary structure is closely related to a coiled-coil of α-helices. However, a detailed study of the fibrinogen sequences shows that the structure is likely to contain several regions which do not have a simple secondary structure. The detailed conformation of the postulated rodlike region of fibrinogen is therefore complex and may approximate a coiled-coil only over relatively short lengths.An important question to emerge from this analysis is whether correct positioning of apolar residues in a pseudo-repeating heptad is sufficiently important to override low α-helix-favouring potential of other residues in the heptad.     

Heptad breaks in α-helical coiled coils: Stutters and stammers

The discontinuities found in heptad repeats of α-helical coiled-coil proteins have been characterized. A survey of 40 α-fibrous proteins reveals that only two classes of heptad breaks are prevalent: the stutter, corresponding to a deletion of three residues, and the newly identified “stammer,” corresponding to a deletion of four residues. This restriction on the variety of insertions/deletions encountered gives support to a unifying structural model, where different degrees of supercoiling accommodate the observed breaks. Stutters in the hemagglutinin coiled-coil region have previously been shown to produce an underwinding of the supercoil, and we show here how, in other cases, stammers would lead to overwinding. An analysis of main-chain structure also indicates that the mannose-binding protein, as well as hemagglutinin, contains an underwound coiled-coil region. In contrast to knobs-into-holes packing, these models give rise to non-close-packed cores at the sites of the heptad phase shifts. We suggest that such non-close-packed cores may function to terminate certain coiled-coil regions, and may also account for the flexibility observed in such long α-fibrous molecules as myosin. The local underwinding or overwinding caused by these specific breaks in the heptad repeat has a global effect on the structure and can modify both the assembly of the protein and its interaction properties. © 1996 Wiley-Liss, Inc.     

Three-dimensional reconstruction and averaging of 50 S ribosomal subunits of Escherichia coli from electron micrographs

The thermal stability and melting kinetics of the α-helical conformation within several regions of the rabbit myosin rod have been investigated. Cyanogen bromide cleavage of long myosin subfragment-2 produced one coiled-coil α-helical fragment corresponding to short subfragment-2 with molecular weight 90,000 (M_r = 45,000) and two fragments from the hinge region with molecular weights of 32,000 to 34,000 (M_r = 16,000 to 17,000) and 24,000 to 26,000 (M_r = 12,000 to 13,000). Optical rotation melting experiments and temperature-jump kinetic studies of long subfragment-2 and its cyanogen bromide fragments show that the hinge and the short subfragment-2 domains melt as quasi-independent co-operative units. The α-helical structure within the hinge has an appreciably lower thermal stability than the flanking short subfragment-2 and light meromyosin regions of the myosin rod. Two relaxation processes for helix-melting, one in the submillisecond range (τ_f) and the other in the millisecond range (τ_s), are observed in the light meromyosin and short subfragment-2 regions of the rod, but melting in the hinge domain is dominated by the fast (τ_f) process. Results suggest that the hinge domain of the subfragment-2 link may be the locus of force generation in a cycling cross-bridge.     

The double-helical molecular structure of crystalline b-amylose

The crystal structure of the B-polymorph of amylose appears to be based on double-stranded helices. The individual strands are in a right-handed six-fold helical conformation repeating in 20.8 Å and are wound parallel around each other. The steric disposition of O-6 is gt. The double helices pack in a hexagonal unit-cell (a  b  18.50 Å, c (fiber repeat)  10.40 Å, γ  120°), with two helices (12 d-glucose residues) per cell. The helices are packed antiparallel and leave an open channel within a hexagonal array that is filled with water molecules. The reliability of the structure analysis is indicated by R  0.22. The structure of B-amylose is consistent with the diffraction diagrams of B-starches and accounts for the physical properties of such starches.     

Substructure of the myosin molecule. 3. Preparation of single-headed derivatives of myosin

Native myosin has two globular regions attached to an a-helical rod. Papain is able to cleave the globular “heads” from the rod, leading to the formation of a variety of single-headed molecules. Among these subfragments are isolated globules (HMM S-1) and single globules attached to helical rods of lengths varying from 500 to 1400 Å. These subfragments can be separated from the other products of the proteolytic digestion by salt elution from a DEAE-cellulose column. Some of the properties of single-headed heavy meromyosin and myosin have been determined by hydrodynamic methods, and shadow-cast preparations of these subfragments have been directly visualized by electron microscopy. In addition to providing further evidence for the presence of two similar halves in myosin, these new subfragments can be used in studies related to the question of why myosin has two active “heads”.     

Heat-induced Denaturation of Myosin Total Rod

The myosin total rod, which consists of smaller segments of light meromyosin and heavy meromyosin subfragment-2 (HMM S–2), prepared by limited papain digestion of rabbit myosin, was purified by Sepharose-2B column chromatography. The purified total rod was more homogeneous than any previously reported, and the sodium dodecyl sulfate (SDS) gel electrophoretic method yielded a molecular weight of 22?23 × 10⁴ (11?11.5 × 10⁴ × 2).

Transition temperatures of this purified myosin total rod obtained from the melting profile during heating were 47.5 and 55°C. The results of ORD and CD measurements showed almost full reversibility upon cooling after thermal treatment. However, the results obtained from difference spectra and fluorescence spectra showed incomplete reversibility with hysteresis.

This ostensible dichotomy concerning the structural thermostability of the rod portion of myosin molecule may mean that although ORD and CD studies show almost full reversibility of the helix-coil transition, local irreversible conformational changes, involving aromatic amino acid residues take place. This fact suggests that the renahired α-rope of the myosin total rod can exhibit different properties than the native molecule under conditions where no discernible loss in helix content occurs.     

Structural features in the heptad substructure and longer range repeats of two-stranded alpha-fibrous proteins

Considerable sequence data have been collected from the intermediate filament proteins and other alpha-fibrous proteins including myosin, tropomyosin, paramyosin, desmoplakin and M-protein. The data show that there is a clear preference for some amino acids to occur in specific positions within the heptad substructure that characterizes the sequences which form the coiled-coil rod domain in this class of proteins. The results also indicate that although there are major similarities between the various proteins there are also key differences. In all cases, however, significant regularities in the linear disposition of the acidic and the basic residues in the coiled-coil segments can be related to modes of chain and molecular aggregation. In particular a clear trend has been observed which relates the mode of molecular aggregation to the number of interchain ionic interactions per heptad pair.     

Structure and refinement of penicillopepsin at 1.8 A resolution

Penicillopepsin, the aspartyl protease from the mould Penicillium janthinellum, has had its molecular structure refined by a restrained-parameter least-squares procedure at 1.8 Å resolution to a conventional R-factor of 0.136. The estimated co-ordinate accuracy for the majority of the 2363 atoms of the enzyme is better than 0.12 Å. The average atomic thermal vibration parameter, B, for the atoms of the enzyme is 14.5 Ų. One determining factor of this low average B value is the large central hydrophobic core, in which there are two prominent clusters of aromatic residues, one of nine, the other of seven residues. The N and C-terminal domains of penicillopepsin display an approximate 2-fold symmetry: 70 residue pairs are topologically equivalent, related by a rotation of 177 ° and a translation of 1.2 Å. The analysis of the secondary structural features of the molecule reveals non-linear hydrogen bonding. In penicillopepsin, there is no difference in the mean hydrogen-bond parameters for the elements of α-helix, parallel or antiparallel β-pleated sheet. The mean values for these structural elements are: NO, 2.90 Å; NHO, 1.95 Å; N?O, 160 °. The average hydrogen-bond parameters of the reverse β-turns and the 3₁₀ helices are distinctly different from the above values. The analysis of sidechain conformational angles χ¹ and χ² penicillopepsin and other enzyme structures refined in this laboratory shows much narrower distributions as compared with those compiled from unrefined protein structures. The close proximity of the carboxyl groups of Asp33 and Asp213 suggests that they share a proton in a tight hydrogen-bonded environment (Asp33OD2 to Asp213OD1 is 2.87 Å). There are several solvent molecules in the active site region and, in particular, O39 forms hydrogen-bonded interactions with both aspartate residues. The disposition of the two carboxyl groups suggests that neither is likely to be involved in a direct nucleophilic attack on the scissile bond of a substrate. The average atomic B-factors of the residues in this region of the molecule are between 5 and 8 Ų, confirming the proposal that conformational mobility of the active site residues has no role in the enzymatic mechanism. However, conformational mobility of neighbouring regions of the molecule e.g. the “flap” containing Tyr75, is verified by the high B-factors for those residues. The positions of 319 solvent sites per asymmetric unit have been selected from difference electron density maps and refined. Thirteen have been classified as internal, and several of these may have key roles during catalysis. The positively charged N^ζ atom of Lys304 forms hydrogen bonds to the carboxylate of Asp14 (internal ion pair) and to two internal water molecules O5 and O25. The protonated side-chain of Asp300 forms a hydrogen bond to Thr214O, 2.78 Å, and is the recipient of a hydrogen bond from a surface pocket water molecule O46. There is no possibility for direct interaction between Asp300 and Lys304 without large conformational changes of their environment. The intermolecular packing involves many protein-protein contacts (66 residues) with a large number of solvent molecules involved in bridging between polar residues at the contact surface. The penicillopepsin molecules resemble an approximate hexagonal close-packing of spheres with each molecule having 12 “nearest” neighbours.     

Crystal structure of Turkey egg-white lysozyme: Results of the molecular replacement method at 5 Å resolution

Turkey egg-white lysozyme differs from hen egg-white lysozyme in its primary structure in 7 of the 129 residues. We have determined the rotational and translational parameters relating the known co-ordinates of hen egg-white lysozyme molecule to the turkey lysozyme. The rotational parameters were determined using the rotation function, the translational parameters were determined by placing the properly rotated molecule systematically at all positions within the unit cell and searching for those positions producing few intermolecular contacts between the α-carbon atoms of one molecule and all its neighbors. These parameters were refined by minimizing the conventional R factor between observed and calculated structure amplitudes. The final rotational and translational parameters give an R value of 46.7% for reflections with d spacings between 6 Å and 12 Å and have 7 intermolecular contacts closer than 5 Å between the a carbon atoms of one molecule and all its neighbors. An electron density map has been calculated at 5 Å resolution; the packing of the molecules in this form appears to present the entire length of the active cleft in the vicinity of the crystallographic 6-fold axis and does not appear to be blocked by neighboring molecules.     

Analysis of the primary structure of collagen for the origins of molecular packing

The amino acid sequence in the triplet region of the α1 chain of collagen was analyzed for complementary relationships that would explain the stagger of multiples of 670 Å between the rod-like molecules in the fibril. The analysis was done by moving the sequence of 1011 amino acids past itself and scoring for complementarity between opposing amino acids allowing a range of ±2 to 3 residues. It was found that interactions between amino acids of opposite charge and between large hydrophobic amino acids in the overlapping region between two chains are maximal when the chains are staggered by 0D, 1D, 2D, 3D and 4D, where D = 234 ± 1 residues. The residue repeat derived from this value is 2.86 ± 0.02 Å. The existence of a D separation between interacting residues was shown to be reflected in the actual distribution of large hydrophobic amino acids. Surprisingly, the distribution approximates the pattern ($\text{2D}\text{11}$)₅($\text{D}\text{11}$) repeated over 4.4D intervals. The regularity may arise from structural constraints imposed by super-coiling. The distribution of charged residues is less regular and does not show a well-defined periodicity. However, positively-charged residues tend to be near negatively-charged residues, allowing intramolecular charge neutralization as well as strong intermolecular charge interactions at 0D.     

Drosophila UNC-45 prevents heat-induced aggregation of skeletal muscle myosin and facilitates refolding of citrate synthase

UNC-45 belongs to the UCS (UNC-45, CRO1, She4p) domain protein family, whose members interact with various classes of myosin. Here we provide structural and biochemical evidence that Escherichia coli-expressed Drosophila UNC-45 (DUNC-45) maintains the integrity of several substrates during heat-induced stress in vitro. DUNC-45 displays chaperone function in suppressing aggregation of the muscle myosin heavy meromyosin fragment, the myosin S-1 motor domain, α-lactalbumin and citrate synthase. Biochemical evidence is supported by electron microscopy, which reveals the first structural evidence that DUNC-45 prevents inter- or intra-molecular aggregates of skeletal muscle heavy meromyosin caused by elevated temperatures. We also demonstrate for the first time that UNC-45 is able to refold a denatured substrate, urea-unfolded citrate synthase. Overall, this in vitro study provides insight into the fate of muscle myosin under stress conditions and suggests that UNC-45 protects and maintains the contractile machinery during in vivo stress.     

Molecular structure of the alpha-lytic protease from Myxobacter 495 at 2.8 Angstroms resolution.

The α-lytic protease was isolated from an extracellular filtrate of the soil microorganism Myxobacter 495. Trigonal crystals (space group, P3₂21) of this serine enzyme were grown from 1·3 m-Li₂SO₄ at pH 7·2. X-ray reflections from crystals of the native enzyme, comprising the 2·8 Å limiting sphere, were phased by the multiple isomorphous replacement technique. Five heavy-atom derivatives were used and the overall mean figure of merit 〈m?〉 is 0·83. The resulting native electron density map of α-lytic protease has been interpreted in conjunction with the published sequence (Olson et al., 1970) of 198 amino-acid residues.α-Lytic protease has a structural core similar to that of the pancreatic serine proteases (108 α-carbon atom positions are topologically equivalent (within 2·0 Å) to residues of porcine elastase) and its tertiary structure is even more closely related to the two other bacterial serine protease structures previously determined (James et al., 1978; Brayer et al., 1978b; Delbaere et al., 1979a). α-Lytic protease has the following distinctive features in common with the bacterial serine enzymes, Streptomyces griseus proteases A and B: an amino terminus that is exposed to solvent on the enzyme surface, a considerably shortened uranyl loop (residues 65 to 84), a major segment of polypeptide chain from the autolysis loop deleted (residues 144 to 155), a buried guanidinium group of Arg138 in an ion-pair bond with Asp194, and an altered conformation of the methionine loop (residues 168 to 182) relative to the pancreatic enzymes.At the present resolution, the members of the catalytic quartet (Ser214, Asp102, His57 and Ser195) adopt the conformation found in all members of the Gly-Asp-Ser-Gly-Gly serine protease family. The carboxylate of Asp102 is in a highly polar environment, as it is the recipient of four hydrogen bonds. The interaction between the N^ε2 atom of the imidazole ring in His57 and O^γ atom of Ser195 is very weak (3·3 Å) and supports the concept that there is little, if any, enhanced nucleophilicity of the side-chain of Ser195 in the native enzyme.The molecular basis for the observed substrate specificity of α-lytic protease is clear from the distribution of amino acid side-chains in the neighborhood of the active site. An insertion of five residues at position 217, and the conformation of the side-chain of Met192 account for the fact that the specificity pocket can bind only small residues, such as Ala, Ser or Val.     

The Polysialyltransferases Interact with Sequences in Two Domains of the Neural Cell Adhesion Molecule to Allow Its Polysialylation

The neural cell adhesion molecule (NCAM) is the major substrate for the polysialyltransferases (polySTs), ST8SiaII/STX and ST8SiaIV/PST. The polysialylation of NCAM N-glycans decreases cell adhesion and alters signaling. Previous work demonstrated that the first fibronectin type III repeat (FN1) of NCAM is required for polyST recognition and the polysialylation of the N-glycans on the adjacent Ig5 domain. In this work, we highlight the importance of an FN1 acidic patch in polyST recognition and also reveal that the polySTs are required to interact with sequences in the Ig5 domain for polysialylation to occur. We find that features of the Ig5 domain of the olfactory cell adhesion molecule (OCAM) are responsible for its lack of polysialylation. Specifically, two basic OCAM Ig5 residues (Lys and Arg) found near asparagines equivalent to those carrying the polysialylated N-glycans in NCAM substantially decrease or eliminate polysialylation when used to replace the smaller and more neutral residues (Ser and Asn) in analogous positions in NCAM Ig5. This decrease in polysialylation does not reflect altered glycosylation but instead is correlated with a decrease in polyST-NCAM binding. In addition, inserting non-conserved OCAM sequences into NCAM Ig5, including an “extra” N-glycosylation site, decreases or completely blocks NCAM polysialylation. Taken together, these results indicate that the polySTs not only recognize an acidic patch in the FN1 domain of NCAM but also must contact sequences in the Ig5 domain for polysialylation of Ig5 N-glycans to occur.     

X-ray diffraction and infrared studies of an -helical fragment from -keratin

Fragments of α-keratin were obtained by partial proteolysis of the low-sulphur protein fraction, S-carboxymethylkerateine-A, from wool. X-ray diffraction and infrared absorption studies were made on oriented films formed from these fragments. The results indicate that the fragments have a coiled-coil α-helical conformation similar to that in α-keratins, and that the films consist of particles approximately 160 Å in length arranged end-to-end.     

Structure of α-keratin: Structural implication of the amino acid sequences of the type I and type II chain segments

Two amino acid sequences from potentially helical fragments of low-sulphur proteins from α-keratin have been analysed computationally and periods 9.4 and 28 residues long noted in the axial disposition of charged residues. Ionic interactions between chains have also been calculated and these indicate a preference for the helical fragments to aggregate in parallel with zero shift between chains in a manner essentially identical to that found for α-tropomyosin.     

Designation of sequences involved in the “coiled-coil” interdomainal connections in fibrinogen: Construction of an atomic scale model

Primary structure studies on human fibrinogen (α₂β₂γ₂) have revealed certain unusual features which are compatible with the existence of a three-stranded set of supercoiled α-helices thought to be characteristic of the keratin family of fibrous proteins. In particular, each of the three non-identical chains has two characteristic braces of cysteines separated by 111 residues. The three chains are apparently bound together at these two junctures in unique six-cysteine rings. The amino acid sequences between these unusual cysteine pairs (themselves separated in all six cases by three residues) are helix-permissive over significant portions of their lengths. Moreover, the non-polar residues tend to vary rhythmically. To test the proposition that these sequences do indeed correspond to the “coiled-coils” long ago predicted on the basis of wide-angle X-ray diffraction studies, we constructed a detailed, atomic scale model of a part of this region. To this end, we fashioned three α-helical segments, each 29 residues long and corresponding to the designated sequences of the α, β and γ-chains, respectively. In each case we incorporated a pitch of approximately 200 Å. We were then able to fit the three helices together in the two possible combinations which yield a pseudo-3-fold axis. In either case all polar residues extend away from the parallel three-stranded rope, and almost all the non-polar side-chains are directed toward the interior. We also constructed a separate model showing how the six cysteines at each end of the proposed rod-like segment are best arranged. The co-ordinates from both models were collected and utilized in a computer-graphic Molecular Modeling System which can display features of the models selectively. Various projections were plotted automatically, some of which are reproduced here.     

Studies on the amino groups of myosin ATPase. Trinitrophenylation of reactive lysyl residue in ventricular and atrial myosins

Myosin and heavy meromyosin from ventricular, atrial, and skeletal muscle were purified and trinitrophenylated by 2,4,6-trinitrobenzene sulfonate. The trinitrophenylation reaction followed a complex kinetics consisting of a fast and slow reaction in all preparations studied. Reactive lysine residues were trinitrophenylated during the fast reaction with a concomitant decrease in K⁺ (EDTA)-activated ATPase and an increase in Mg²⁺-stimulated ATPase activities of myosin. The extent of increase in Mg²⁺-mediated ATPase was the highest with skeletal and the lowest with atrial myosin. The trinitrophenylation of the less reactive lysyl residues continued during the slow reaction. The rate constants of the reactions and the number of reactive lysine residues were evaluated by computer analyses of the trinitrophenylation curves. Two reactive lysine residues were found in skeletal and ventricular myosins while their number in atrial myosin was somewhat lower. The rate of trinitrophenylation in skeletal muscle myosin or heavy meromyosin was always higher than in the two cardiac myosin isozymes. Addition of KCl increased the trinitrophenylation of both highly reactive and slowly reactive lysyl residues in all of the three heavy meromyosins, however, the effect was more profound with cardiac heavy meromyosins. Addition of MgADP induced spectral changes in trinitrophenylated skeletal but not in cardiac myosins. Similar changes occurred in skeletal and to a lesser degree in ventricular heavy meromyosin, but no definite spectral changes were observed in atrial heavy meromyosin. The findings suggest that structural differences exist around the reactive lysyl residue in the head portion of the three myosins.     

Studies of the conformation of apomyoglobin in aqueous solutions and denaturing organic solvents.

The properties of apomyoglobin were examined in aqueous solutions and various helix- and random-coil-forming solvents by solvent perturbation, optical rotation, circular dichroism, and viscosity measurements. The solvent perturbation data obtained in neutral aqueous solutions suggest 25–40% exposure of the two tryptophyl residues and 50–60% exposure of the three tyrosyls. The estimates of burial of these groups are in the ranges expected for myoglobin based on its X-ray structure. In the helicogenic alcohols, methanol, ethanol, 2-chloroethanol, trifluoroethanol, and 1-propyl alcohol, as well as in acidic solutions, 8 M urea and 6M guanidine hydrochloride, essentially all the tryptophyl and tyrosyl residues are found to be exposed to solvent based on this method. Analysis of the ORD and CD data indicates that in the alcohols the α-helix content of apomyoglobin has in most cases changed from 58–59% to about 80–95%. Analysis of the intrinsic viscosity data based on the equations of Simha and Kirkwood and Auer indicates that the polypeptide chain in these solvents has the dimensions of fully extended α-helical rods, with lengths of 221–251 Å and mean diameters of 12.8–13.6 Å. It is concluded that apomyoglobin in the various alcohols must have an extended but somewhat irregular rodlike structure, having a few bend or irregular sequences between the α-helical segments due largely to the presence of the four proline residues, 37, 88, 100, and 120 in the amino acid sequence.