Initiation of DNA replication at cloned origins of bacteriophage T7

Bacteriophage T7 DNA replication is initiated at a site 15% of the distance from the genetic left end of the chromosome. This primary origin contains two tandem T7 RNA polymerase promoters (phi 1.1A and phi 1.1B) followed by an A + T-rich region. When the primary origin region is deleted replication initiates at secondary origins. We have analyzed the ability of plasmids containing cloned fragments of T7 to replicate after infection of Escherichia coli with bacteriophage T7. All cloned T7 fragments that support plasmid replication contain a T7 promoter but a T7 promoter alone is not sufficient for replication. Replication of plasmids containing the primary origin is dependent on T7 DNA polymerase and gene 4 protein (helicase/primase) and a portion of the A + T-rich region. The other T7 fragments that support plasmid replication after T7 infection are promoter regions phi OR, phi 13 and phi 6.5 (secondary origins). When both the primary and secondary origins are present simultaneously on compatible plasmids, replication of each is temporally regulated. Such regulation may play a role during T7 DNA replication.     

Cloning of bacteriophage T5 DNA fragments in the plasmid pBR322. Analysis of recombinant plasmids by the method of bonding with RNA-polymerase from Escherichia coli on nitrocellulose filters

DNA of bacteriophage T5 was hydrolyzed with restriction endonucleases HindIII and BamHI, and subjected to the combined hydrolysis with BamHI+EcoRI and BamHI+ +HindIII. Fragments obtained were cloned in the plasmid pBR322. About 17% of T5 genome were recovered in recombinant plasmids. Cloned fragments were localized on the physical map of the phage by restriction analysis and Southern hybridization. With the aim of direct cloning of T5 promoters, PstI/HindIII fragments were inserted into pBR322 followed by selection of recombinants on ApsTCr phenotype. Binding of BsuRI and AluI fragments of hybrid plasmids with E. coli RNA polymerase was studied by nitrocellulose filter assay. The fragments, which were capable to form heparin resistant complexes were identified.     

Plasmid vectors for positive galactose-resistance selection of cloned DNA in Escherichia coli

Insertion of a HindIII-EcoRI fragment carrying part of the gal operon from lambda gal+ into pBR322 yields a plasmid (pAA3) which confers strong galactose sensitivity on E. coli strains deleted for the gal operon. Sensitivity to galactose is caused by the expression of kinase and transferase (but not epimerase) genes from a promoter located in the tet gene of pBR322. Insertion of a DNA fragment carrying Tn9 at the HindIII junction blocks gal expression and produces a galactose-resistant phenotype. Hence, galactose resistance can be used to select DNA fragments cloned at the HindIII site. The system was used efficiently for cloning lambda, yeast, and human DNA. The cloned fragments can be screened directly for the presence of promoters by testing for tetracycline resistance. Alternatively, these plasmids can be used as cosmids for cloning large fragments of DNA at a number of sites. Construction of several related vectors is described.     

Creation of a T7 autogene. Cloning and expression of the gene for bacteriophage T7 RNA polymerase under control of its cognate promoter

The coding sequence for bacteriophage T7 RNA polymerase has been cloned and expressed under control of a cognate T7 promoter, a configuration referred to as an autogene. Cloning a T7 autogene in a derivative of plasmid pBR322 in Escherichia coli was achieved by a combination of blocking initiation at the T7 promoter with bound lac repressor and inhibiting the polymerase itself by T7 lysozyme. Neither type of inhibition by itself was sufficient to control the autogene. Upon unblocking the T7 promoter with added inducer. T7 RNA polymerase produced its own mRNA, leading to autocatalytic production of polymerase protein. T7 autogenes may be useful for developing high-level gene expression systems in a variety of cell types, with little if any need for the host cell RNA polymerase.     

Fate of cloned bacteriophage T4 DNA after phage T4 infection of clone-bearing cells

Plasmid pBR322 replication is inhibited after bacteriophage T4 infection. If no T4 DNA had been cloned into this plasmid vector, the kinetics of inhibition are similar to those observed for the inhibition of Escherichia coli chromosomal DNA. However, if T4 DNA has been cloned into pBR322, plasmid DNA synthesis is initially inhibited but then resumes approximately at the time that phage DNA replication begins. The T4 insert-dependent synthesis of pBR322 DNA is not observed if the infecting phage are deleted for the T4 DNA cloned in the plasmid. Thus, this T4 homology-dependent synthesis of plasmid DNA probably reflects recombination between plasmids and infecting phage genomes. However, this recombination-dependent synthesis of pBR322 DNA does not require the T4 gene 46 product, which is essential for T4 generalized recombination. The effect of T4 infection on the degradation of plasmid DNA is also examined. Plasmid DNA degradation, like E. coli chromosomal DNA degradation, occurs in wild-type and denB mutant infections. However, neither plasmid or chromosomal degradation can be detected in denA mutant infections by the method of DNA--DNA hybridization on nitrocellulose filters.     

Nucleotide sequence of the cloned gene for bacteriophage T7 RNA polymerase

The coding sequence of the gene for bacteriophage T7 RNA polymerase has been cloned into the PstI site of plasmid pBR322. This cloned DNA extends from T7 nucleotide (Dunn & Studier, 1981) 3127 to 5821 or T7 coordinate 7.82 to 14.55. The nucleotide sequence is given, as well as the predicted amino acid sequence of T7 RNA polymerase. This peptide sequence is comprised of 883 amino acid residues with a total molecular weight of 98,092.     

Cloning, expression, and purification of gene 3 endonuclease from bacteriophage T7

The structural gene for the single-stranded endonuclease coded for by gene 3 of bacteriophage T7 has been cloned in pGW7, a derivative of the plasmid pBR322, which contains the lambda PL promoter and the gene for the temperature-sensitive lambda repressor, cI857. The complete gene 3 DNA sequence has been placed downstream of the PL promoter, and the endonuclease is overproduced by temperature induction at mid-log phase of Escherichia coli carrying the recombinant plasmid pTP2. Despite the fact that cell growth rapidly declines due to toxic effects of the excess endonuclease, significant amounts of the enzyme can be isolated in nearly homogeneous form from the induced cells. An assay of nuclease activity has been devised using gel electrophoresis of the product DNA fragments from DNA substrates. These assays show the enzyme to have an absolute requirement for Mg(II) (10 mM), a broad pH optimum near pH 7, but significant activity from pH 3 to pH 9, and a 10-100-fold preference for single-stranded DNA (ssDNA). The enzyme is readily inactivated by ethylenediaminetetraacetic acid or high salt. The differential activity in favor of ssDNA can be exploited to map small single-stranded regions in double-stranded DNAs as shown by cleavage of the melted region of an open complex of T7 RNA polymerase and its promoter.     

Molecular cloning in plasmid pBR322 giving altered expression of the tetracycline resistance gene

The two HindIII fragments of polyoma virus DNA were cloned in the HindIII site of plasmid pBR322, a site located in the RNA polymerase promoter involved in the expression of tetracycline resistance. Although insertion of foreign DNA into this site did not always result in the complete loss of tetracycline resistance, Escherichia coli K12 strain chi 1776 harbouring recombinant plasmids exhibited reduced growth properties in liquid culture with tetracycline and could easily be differentiated from bacteria transformed by non-recombinant plasmids. The formation of plasmid multimers increased the resistance to tetracycline at the level of the induction period, presumably as a result of a gene dosage effect.     

Construction in vitro of hybrid plasmids carrying all the EcoRI fragments from lambdarifd18 DNA.

The cloning of all the eleven fragments obtained by degrading the phage lambdarifd18 by the restriction enzyme EcoRI into the plasmid pSF2124 has been achieved: nine of these fragments have been cloned individually, whereas two others have been cloned jointly in the same plasmid. These fragments harbor, in addition of lambda genes, the genes for ribosomal proteins, the elongation factor Tu, the beta and beta' subunits of RNA polymerase and the ribosomal RNAs. The clones carrying the ribosomal RNA genes have been constructed to provide convenient plasmids to determine the primary structure of ribosomal RNAs. Some further genetic manipulations in vitro have been performed on two of them to remove extraneous non-ribosomal RNA gene sequences; the ribosomal genes purified this way have been subcloned into the plasmid pBR322. Other clones of interest have been obtained which carry the genes for the elongation factor Tu, a number of 50-S ribosomal proteins and the beta subunit of RNA polymerase.     

Bacteriophage T7 DNA packaging. I. Plasmids containing a T7 replication origin and the T7 concatemer junction are packaged into transducing particles during phage infection

Bacteriophage T7 DNA is a linear duplex molecule with a 160 base-pair direct repeat (terminal redundancy) at its ends. During replication, large DNA concatemers are formed, which are multimers of the T7 genome linked head to tail through recombination at the terminal redundancy. We define the sequence that results from this recombination, a mature right end joined to the left end of T7 DNA, as the concatemer junction. To study the processing and packaging of T7 concatemers into phage particles, we have cloned the T7 concatemer junction into a plasmid vector. This plasmid is efficiently (at least 15 particles/infected cell) packaged into transducing particles during a T7 infection. These transducing particles can be separated from T7 phage by sedimentation to equilibrium in CsCl. The packaged plasmid DNA is a linear concatemer of about 40 x 10(3) base-pairs with ends at the expected T7 DNA sequences. Thus, the T7 concatemer junction sequence on the plasmid is recognized for processing and packaging by the phage system. We have identified a T7 DNA replication origin near the right end of the T7 genome that is necessary for efficient plasmid packaging. The origin, which is associated with a T7 RNA polymerase promoter, causes amplification of the plasmid DNA during T7 infection. The amplified plasmid DNA sediments very rapidly and contains large concatemers, which are expected to be good substrates for the packaging reaction. When cloned in pBR322, a sequence containing only the mature right end of T7 DNA is sufficient for efficient packaging. Since this sequence does not contain DNA to the right of the site where a mature T7 right end is formed, it was expected that right ends would not form on this DNA. In fact, with this plasmid the right end does not form at the normal T7 sequence but is instead formed within the vector. Apparently, the T7 packaging system can also recognize a site in pBR322 DNA to produce an end for packaging. This site is not recognized solely by a "headful" mechanism, since there can be considerable variation in the amount of DNA packaged (32 x 10(3) to 42 x 10(3) base-pairs). Furthermore, deletion of this region from the vector DNA prevents packaging of the plasmid. The end that is formed in vector DNA is somewhat heterogeneous. About one-third of the ends are at a unique site (nucleotide 1712 of pBR322), which is followed by the sequence 5'-ATCTGT-3'. This sequence is also found adjacent to the cut made in a T7 DNA concatemer to produce a normal T7 right end.